Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FHR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

197 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Neutronic Tests of Fluoride Salt Based MSR/FHR Coolants

Research on molten salt reactor (MSR) technology based on fluoride salts as a convenient way of higher actinides incineration and/or utilization of thorium fuel has been performed at UJV Rez and later Research Centre Rez in Czech Republic since 1999. Necessary steps towards to the deployment and possible commercialization were examined in past investigations. Neutronic testing is an inseparable part of the development and was at first carried out in a series of experiments with LiF-NaF salt (60 mol% LiF, 40 mol% NaF) subjected to a neutron field shaped by different moderators within the framework of the EROS experiments. Later, neutron spectrum was measured in this salt and significant variations in calculation to experiment C/E comparison were discovered. Further tests were performed with Flibe (66 mol% LiF, 33 mol% BeF{sub 2}) reactor coolant salt containing enriched lithium (99.994 mol% Li-7), which was provided by Oak Ridge National Laboratory (ORNL). This Flibe salt originally comes from the Molten Salt Reactor Experiment (MSRE) and was supplied to the Czech Republic within the framework of a collaborative agreement on MSR and fluoride-salt-cooled high-temperature reactor (FHR) research and development (R and D) concluded between the Czech Ministry of Industry and Trade and US Department of Energy in 2012. All experiments in this work were carried out at the LR-0 reactor at Research Centre Rez. The LR-0 is a pool-type zero power light water reactor with large and flexible experimental capabilities due to its design and fuel construction.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

Fluoride salt static freezing study

Molten salt reactor designs such as the FHR must consider the safety implications of freezing, requiring the development of thermal hydraulics models that account for freezing behavior. Pipe models that couple heat transfer, fluid dynamics, and phase change physics will require verification and validation. A static freezing study is being conducted to provide an initial set of validation data with LiF-BeF{sub 2} (FLiBe). The study will also be performed with LiF-NaF-KF (FLiNaK) in order to quantify the distortion that arises from using FLiNaK as a non-toxic surrogate salt for thermal-hydraulic studies. In order to develop the numerical model, accurate inputs for the thermal hydraulic properties of the two salts of interest need to be measured near the freezing point. For this reason, a series of three experiments including Differential Scanning Calorimetry (DSC) measurements, the Density Measurement Experiment, and the Static Freezing Experiment are being conducted to determine these thermo-physical properties at temperatures near the freezing point. The Static Freezing Experiment is also designed to determine the degree of supercooling that FLiBe and FLiNaK experience. Supercooling is a temperature depression below the freezing point that the liquid experiences before freezing initiates. Increased supercooling in a liquid flowing through a pipe leads to increased dendritic freezing and an increased likelihood of pipe blockage and freeze-shut. Based on previous research on supercooling in water and non-fluoride salts, supercooling is likely affected most strongly by cooling rate and sample size (as well as salt purity). No data has been generated previously on supercooling in fluoride salts such as FLiBe and FLiNaK. The results of this set of DSC, Density Measurement and Static Freezing experiments will be used in an ongoing fluoride salt freezing study being conducted to develop pipe freezing models for molten salts to be used in safety analysis. The thermal hydraulic properties measured in this study will serve as inputs for all future models. With the supercooling behavior of both salts quantified, it can be assessed whether supercooling must be included in future thermal hydraulic models. The validated Static Freezing Experiment model can then serve as the framework for a pipe freezing model and eventually a 1D system code.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2017

Effects of Radiative Heat Transfer in High-Temperature Liquid-Salts

Recent technological advances and needs for high-temperature heat have increased interest in nuclear power systems that utilize liquid-salts such as Fluoride-salt-cooled High-temperature Reactors (FHR), Molten Salt Reactors (MSR), and high-magnetic-field fusion machines with immersion salt coolant blankets. These systems can be used to provide high-temperature heat to high carbon-emitting industrial processes such as oil refining, hydrogen production, and shale oil recovery. Additionally, improved gas turbine technology has made coupling high-temperature reactors to Nuclear Air-Brayton Combined Cycles possible. This allows for both base-load and peak electricity production that can increase system efficiency and net revenue. New fusion reactor designs with increased power density and smaller sizes can also benefit from liquid salt blankets to produce tritium while providing neutron and gamma shielding to high-field magnets. These applications when combined with enhancements in safety, fuel cycle, and cost make liquid-salt reactors an attractive option for new nuclear power systems. However, despite successful experiments such as the Molten Salt Reactor Experiment, the limited experience with liquid-salt coolants leaves unanswered questions. Understanding of the thermal hydraulic and heat transfer performance of these salts needs to be improved, especially in the area of radiative heat transfer. Liquid salt systems have typical operating temperatures between 600 and 700 deg. C. Because thermal radiation scales approximately as T4, its effects begin to become important in this temperature range. Under higher-temperature off-normal conditions radiative heat transfer can become a major mechanism of heat transfer.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Fluoride-Cooled High-Temperature Pebble-Bed Reactor Reference Plant Model Updates

This work presents the latest improvements to, and investigations performed with, the Fluoride-Cooled High-Temperature Pebble-Bed Reactor reference plant models for the United States Nuclear Regulatory Commission. These models, developed with the Comprehensive Reactor Analysis Bundle, or BlueCRAB, serve as the foundation for the future development of detailed design evaluation models based on license applications. BlueCRAB is the code suite proposed for non-light-water reactor systems safety analyses, and it incorporates various simulation tools developed by the Nuclear Energy Advance Modeling and Simulation program, including the Griffin code for reactor physics, the Pronghorn and SAM codes for core thermal fluids, the BISON code for solid conduction and fuel performance, and the SAM code for system analysis. The primary objective of this work is to assess the level of readiness of BlueCRAB for modeling fluoride-cooled high-temperature pebble-bed reactors. We first developed numerical models in BlueCRAB that include the key physics for this technology, ensuring an adequate level of fidelity for modeling the core performance during accident scenarios. This was followed by simulation of transient scenarios, two loss-of-forced-cooling events (one protected and one unprotected), and two control rod withdrawal events (one delayed and one prompt supercritical reactivity insertion). The analysis includes comparisons between the 2-D thermal fluid porous media models in Pronghorn and SAM, comparisons between coupled Pronghorn-Griffin and coupled SAM-Griffin models for two loss-of-forced cooling events and one control rod withdrawal event, and comparisons between SAM single-solve and domain-overlapping approaches for multi-scale thermal fluid coupling. In addition, we performed comparisons between 3-D, 2-D, and 0-D neutronic models for the two control rod withdrawal scenarios with Pronghorn-Griffin. The results show that the BlueCRAB models led to physically intuitive solutions for the scenarios examined. The changes in the various scalar and vector fields such as the neutron flux, power, temperatures, densities, pressures, and velocities are all within the expected ranges, and their distributions can be explained from the system response of the transients and the geometric and material variations. Several comparisons suggest that the porous media models in Pronghorn and SAM can lead to similar solutions, even though they are based on different methodologies. The simulations demonstrate that there are differences between the various levels of fidelity, and it is advisable to have flexible tools that can cover the breadth and depth of needs that may arise in future technical evaluations. We believe that BlueCRAB’s capabilities represent a significant asset for confirmatory analyses aimed at resolving important safety questions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Hydrogen uptake in graphite matrix at high temperature

Tritium management is a critical challenge for the next generation of nuclear reactors, such as Fluoride Salt Cooled High Temperature Reactors (FHRs) and High Temperature Gas-cooled Reactors (HTGRs), due to the higher production rate (up to 10,000 times) than conventional Light Water Reactors (LWRs). Graphitic materials employed as moderator, reflector, and fuel pebbles offer a potential pathway for tritium recovery by serving as a sink for tritium. Prediction of uptake capacity under reactor relevant conditions remains a challenge due to a lack of low partial pressure data and significant inter-grade variability of graphite. This study addresses these gaps by providing a comprehensive characterization of hydrogen (as a tritium surrogate) uptake and release behavior in the A3-3 graphite matrix (GM) used in fuel pebbles. Uptake measurements are performed at reactor relevant temperatures of 600- 800 °C, 1-200 Torr hydrogen pressure, and 15-120 min equilibration time, followed by thermal desorption spectroscopy up to 1100 °C. Uptake experiments at different equilibration times demonstrate the role of kinetics in hydrogen uptake, which can be modeled as a diffusion-with-trapping process. In the thermodynamics limit, the Sips adsorption model is shown to capture the uptake in A3-3 GM well. Our campaign provides a set of new results for hydrogen uptake in A3-3, including limiting uptake capacity at 600 °C, apparent diffusion coefficient at 600 °C, and the first estimates of the FHR/HTGR relevant (600 °C, 20 Pa partial pressure) equilibrium uptake capacity and time to saturation. Desorption data highlights a new site for hydrogen uptake, not observed in nuclear graphite, which we attribute to the non-graphitized binder. Using the Kissinger method, we estimate activation energy for release from the desorption peaks, confirming the activation energy for release from the basal planes and providing the first estimate for the activation energy of release from the binder.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

An electrochemical study of hydrogen in molten 2LiF-BeF 2 (FLiBe) with addition of LiH

The chemical and transport behavior of hydrogen isotopes in molten 2LiF-BeF 2 (FLiBe) is of interest for the design of tritium management systems in nuclear fission and fusion reactors that use FLiBe. The chemical reaction of LiH with FLiBe is used to introduce hydrogen in the molten salt and electrochemical methods are used for in situ studies of hydrogen in FLiBe. LiH reacts with molten FLiBe to generate an electroactive species whose voltammetry peak is proportional to the added quantity of LiH. The cyclic voltammetry reaction potential of 2.009 ± 0.050 V vs Be/Be 2+ and the electron exchange of n = 0.8 ± 0.5 are consistent with the one-electron oxidation of dissolved H in the zero valence state, H o to H + . The concentration of H o is estimated by linear sweep voltammetry at 60–80% of the hydrogen introduced by the reaction of 0.42 mol% LiH with FLiBe and after eleven hours it remains above 40%. It is postulated that covalent BeH 2 is formed in FLiBe upon LiH addition, as a FLiBe-soluble quasi-stable intermediate product. Furthermore, the results provide an evaluation of LiH as a means of introducing dissolved hydrogen in FLiBe, enabling electrochemical methods as tools to advance the understanding of the chemistry of hydrogen isotopes in FLiBe.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2016

FLiNaK Compatability Studies with Inconel 600 and Silicon Carbide

A small liquid fluoride salt test apparatus has been constructed and testing conducted to examine the compatibility of SiC, Inconel 600, and a spiral wound gasket material in FLiNaK salt. These tests were conducted to test materials and sealing systems that would be used in a FLiNaK salt test loop. Three months of testing at 700oC was used to assure that these materials and seals would be acceptable operating under expected test loop conditions. The SiC specimens showed little or no change over the test period while the spiral wound gasket material showed no degradation, except for the possibility of salt seeping into the outermost spirals of the gasket. The Inconel 600 specimens showed regions of voiding which penetrated the specimen surface to about 250 m in depth. Analysis indicated that the salt had leached chrome from the Inconel surface as was expected for this material. Because the test loop will have a limited working lifetime, it was concluded that these materials would be satisfactory for loop construction.

42 ENGINEERING↗
DOE OSTI2016

Embedded I&C for Extreme Environments

This project uses embedded instrumentation and control (I&C) technologies to demonstrate potential performance gains of nuclear power plant components in extreme environments. Extreme environments include high temperature, radiation, high pressure, high vibration, and high EMI conditions. For extreme environments, performance gains arise from moment-to-moment sensing of local variables and immediate application of local feedback control. Planning for embedding I&C during early system design phases contrasts with the traditional, serial design approach that incorporates minimal I&C after mechanical and electrical design is complete. The demonstration application involves the development and control of a novel, proof-of-concept motor/pump design. The motor and pump combination operate within the fluid environment, eliminating the need for rotating seals. Actively controlled magnetic bearings also replace failure-prone mechanical contact bearings that typically suspend rotating components. Such as design has the potential to significantly enhance the reliability and life of the pumping system and would not be possible without embedded I&C.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

NRC Multiphysics Analysis Capability Deployment (FY2021--Part 1)

This report details progress and activities of Idaho National Laboratory (INL) on the Nuclear Regulatory Commission (NRC) project “Development and Modeling Support for Advanced Non-Light Water Reactors.” The tasks completed for this report are as follows: First, Task 1d: The net radiation transfer method was implemented into MOOSE for modeling reactor cavity cooling system geometries. RCCS models for two experiments were created: (1) Natural Convection Shutdown Heat Removal Test Facility (NSTF) experiment R022, and (2) HTTR VCS mockup. For validation, computed temperature distributions were compared to measured temperatures. Next, Task 4c: An algorithm for computing the pebble bed reactor equilibrium core isotopic com-position was developed and an initial version is implemented into the reactor multi-physics code Griffin. Initial results for a simplified axisymmetric pebble bed reactor are presented. Finally, Task 7: generation of a reference plant model for molten salt cooled pebble bed reactor.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2013

Verification of a Depletion Method in SCALE for the Advanced High Temperature Reactor

This study describes a new approach employing the Dancoff correction method to model the TRISO-based fuel form used by the Advanced High-Temperature Reactor (AHTR) reactor design concept. The Dancoff correction method is used to perform isotope depletion analysis using the TRITON sequence of SCALE and is verified by code-to-code comparisons. The current AHTR fuel design has TRISO particles concentrated along the edges of a slab fuel element. This geometry prevented the use of the DOUBLEHET treatment, previously developed in SCALE to model spherical and cylindrical fuel. The new method permits fuel depletion on complicated geometries that traditionally can be handled only by continuous energy based depletion code systems. The method was initially tested on a fuel configuration typical of the Next Generation Nuclear Plant (NGNP), where DOUBLEHET treatment is possible. A confirmatory study was performed on the AHTR reference core geometry using the VESTA code, which uses the continuous energy MCNP5 code as a transport solver and ORIGEN2.2 code for depletion calculations. Comparisons of the results indicate good agreement of whole core characteristics, such as the multiplication factor and the isotopics, including their spatial distribution. Key isotopes analyzed included 235U, 239Pu, 240Pu, and 241Pu. The results from this study indicate that the Dancoff factor method can generate estimates of core characteristics with reasonable precision for scoping studies of configurations where DOUBLEHET treatment cannot be performed.

AHTR↗