Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Exchange correlation functionals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Distribution of cations in wurtzitic In x Ga 1-x N and In x Al 1-x N alloys: Consequences for energetics and quasiparticle electronic structures

The ternary, isostructural, wurtzite-derived group-III mononitride alloys In x Ga 1-x N andIn x Al 1-x N are reexamined within a cluster expansion approach. Using density functional theory together with the AM05 exchange-correlation functional, the total energies and the optimized atomic geometries of all 22 clusters classes of the cluster expansion for each material system are calculated. The computationally demanding calculation of the corresponding quasiparticle electronic structures is achieved for all cluster classes by means of a recently developed scheme to approximately solve the quasiparticle equation based on the HSE06 hybrid functional and the G₀W₀ approach. Using two different alloy statistics, the configurational averages for the lattice parameters, the mixing enthalpies, and the bulk moduli are calculated. The composition-dependent electronic structures of the alloys are discussed based on configurationally averaged electronic states, band gaps, and densities of states. Ordered cluster arrangements are found to be energetically rather unfavorable, however, they possess the smallest energy gaps and, hence, contribute to light emission. The influence of the alloy statistics on the composition dependencies and the corresponding bowing parameters of the band gaps is found to be significant and should, hence, lead to different signatures in the optical-absorption or -emission spectra.

de Carvalho, Luiz Cláudio↗

Chemical Shift of the K{sub α1} and K{sub α2} Lines of the X-ray Emission Spectrum of Yb(II)/Yb(III) Fluorides: a Quantum-Chemical Investigation

Chemical shifts of the K{sub α1} and K{sub α2} lines (the 2p{sub 3/2} → 1s{sub 1/2} and 2p{sub 1/2} → 1s{sub 1/2} transitions, respectively) of the X-ray emission spectrum of the Yb atom in fluorides have been calculated by ab initio modeling the electronic structure. The valence transition Yb(II) → Yb(III) has been analyzed by examples of YbF{sub 2}, YbF{sub 3}, and Yb{sub 2}F{sub 4} molecules and YbF{sub 2}{sup +} cation. The relativistic pseudopotential and basis sets corresponding to it have been constructed for the ytterbium atom. They were used in calculations by the two-component noncollinear version of the density functional theory (DFT) with the PBE0 exchange-correlation functional. Results for the three-coordinated Yb(II) in the FYbF{sub 2}YbF dimer demonstrated a very weak dependence of the chemical shift on the coordination number of the Yb atom and on the molecular association of ytterbium difluoride. Chemical shifts of the X-ray emission spectrum for the ytterbium compound are related mainly to the change in the occupation of the 4 f shell.

74 ATOMIC AND MOLECULAR PHYSICS↗

Geometry Optimization and Charge Density Distribution of Single Layer of ZN-Based Metal-Organic Framework

The set of theoretical approaches were used to obtain the optimized geometries, electronic structure and charge density of single layer of metal-organic framework based on Zn [Zn{sub 2}(TBAP{sub y})(H{sub 2}O){sub 2} · 3.5DEF]{sub n} (MOF-Zn). Infinite monolayer composed of the unit cell of the MOF-Zn was considered. Ground state properties were researched using density functional theory with BLYP and PBE exchange-correlation functionals. The influence of the type of these approaches on the spatial structure and charge density was discussed.

36 MATERIALS SCIENCE↗

Modelling charge transfer reactions with the frozen density embedding formalism

The frozen density embedding (FDE) subsystem formulation of density-functional theory is a useful tool for studying charge transfer reactions. In this work charge-localized, diabatic states are generated directly with FDE and used to calculate electronic couplings of hole transfer reactions in two {pi}-stacked nucleobase dimers of B-DNA: 5{sup '}-GG-3{sup '} and 5{sup '}-GT-3{sup '}. The calculations rely on two assumptions: the two-state model, and a small differential overlap between donor and acceptor subsystem densities. The resulting electronic couplings agree well with benchmark values for those exchange-correlation functionals that contain a high percentage of exact exchange. Instead, when semilocal GGA functionals are used the electronic couplings are grossly overestimated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and Electronic Effects on the Properties of Fe 2 (dobdc) upon Oxidation with N 2 O

Here, we report electronic, vibrational, and magnetic properties, together with their structural dependences, for the metal–organic framework Fe 2 (dobdc) (dobdc 4 – = 2,5-dioxido-1,4-benzenedicarboxylate) and its derivatives, Fe 2 (O) 2 (dobdc) and Fe 2 (OH) 2 (dobdc)—species arising in the previously proposed mechanism for the oxidation of ethane to ethanol using N 2 O as an oxidant. Magnetic susceptibility measurements reported for Fe 2 (dobdc) in an earlier study and reported in the current study for Fe II 0.26 [Fe III (OH)] 1.74 (dobdc)(DMF) 0.15 (THF) 0.22 , which is more simply referred to as Fe 2 (OH) 2 (dobdc), were used to confirm the computational results. Theory was also compared to experiment for infrared spectra and X-ray powder diffraction structures. Structural and magnetic properties were computed by using Kohn-Sham density functional theory both with periodic boundary conditions and with cluster models. In addition, we studied the effects of different treatments of the exchange interactions on the magnetic coupling parameters by comparing several approaches to the exchange-correlation functional: generalized gradient approximation (GGA), GGA with empirical Coulomb and exchange integrals for 3d electrons (the GGA+U method), nonseparable gradient approximation with empirical Coulomb and exchange integrals for 3d electrons (GAM+U), hybrid GGA, meta-GGA, and hybrid meta- GGA. We found the coupling between the metal centers to be ferromagnetic in the case of Fe 2 (dobdc) and antiferromagnetic in the cases of Fe 2 (O) 2 (dobdc) and Fe 2 (OH) 2 (dobdc). The shift in magnetic coupling behavior correlates with the changing electronic structure of the framework, which derives from both structural and electronic changes that occur upon metal oxidation and addition of the charge-balancing oxo and hydroxo ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrafast deactivation processes in the 2-aminopyridine dimer and the adenine-thymine base pair: Similarities and differences

2-aminopyridine dimer has frequently been used as a model system for studying photochemistry of DNA base pairs. We examine here the relevance of 2-aminopyridine dimer for a Watson-Crick adenine-thymine base pair by studying UV-light induced photodynamics along two main hydrogen bridges after the excitation to the localized {sup 1}{pi}{pi}* excited-state. The respective two-dimensional potential-energy surfaces have been determined by time-dependent density functional theory with Coulomb-attenuated hybrid exchange-correlation functional (CAM-B3LYP). Different mechanistic aspects of the deactivation pathway have been analyzed and compared in detail for both systems, while the related reaction rates have also be obtained from Monte Carlo kinetic simulations. The limitations of the 2-aminopyridine dimer as a model system for the adenine-thymine base pair are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combined hybrid functional and DFT+U calculations for metal chalcogenides

In the density-functional studies of materials with localized electronic states, the local/semilocal exchange-correlation functionals are often either combined with a Hubbard parameter U as in the LDA+U method or mixed with a fraction of exactly computed (Fock) exchange energy yielding a hybrid functional. Although some inaccuracies of the semilocal density approximations are thus fixed to a certain extent, the improvements are not sufficient to make the predictions agree with the experimental data. Here, we put forward the perspective that the hybrid functional scheme and the LDA+U method should be treated as complementary, and propose to combine the range-separated Heyd-Scuseria-Ernzerhof (HSE) hybrid functional with the Hubbard U. We thus present a variety of HSE+U calculations for a set of II-VI semiconductors, consisting of zinc and cadmium monochalcogenides, along with comparison to the experimental data. Our findings imply that an optimal value U{sup *} of the Hubbard parameter could be determined, which ensures that the HSE+U{sup *} calculation reproduces the experimental band gap. It is shown that an improved description not only of the electronic structure but also of the crystal structure and energetics is obtained by adding the U{sup *} term to the HSE functional, proving the utility of HSE+U{sup *} approach in modeling semiconductors with localized electronic states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Software for the frontiers of quantum chemistry: An overview of developments in the Q-Chem 5 package

This article summarizes technical advances contained in the fifth major release of the Q-Chem quantum chemistry program package, covering developments since 2015. A comprehensive library of exchange-correlation functionals, along with a suite of correlated many-body methods, continues to be a hallmark of the Q-Chem software. The many-body methods include novel variants of both coupled-cluster and configuration-interaction approaches along with methods based on the algebraic diagrammatic construction and variational reduced density-matrix methods. Methods highlighted in Q-Chem 5 include a suite of tools for modeling core-level spectroscopy, methods for describing metastable resonances, methods for computing vibronic spectra, the nuclear-electronic orbital method, and several different energy decomposition analysis techniques. High-performance capabilities including multithreaded parallelism and support for calculations on graphics processing units are described. Q-Chem boasts a community of well over 100 active academic developers, and the continuing evolution of the software is supported by an "open teamware" model and an increasingly modular design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Not all platinum surfaces are the same: Effect of the support on fundamental properties of platinum adlayer and its implications for the activity toward hydrogen evolution reaction

The adsorption of atomic hydrogen on a platinum monolayer supported on orthorhombic Mo 2 C(100) surface has been investigated, considering different hydrogen surface coverages. Calculations have been performed using density functional theory with the Perdew-Burke-Ernzerhof exchange correlation functional and a D3 Van der Waals corrections. The theoretical insight has been gained into atomic hydrogen interaction with Pt monolayer, supported on both molybdenum and well-studied tungsten carbide, and considering hydrogen surface coverage. Fundamental properties of Pt adlayer depend on the support, affecting hydrogen evolution activity of the resulting systems. At low hydrogen coverage all systems, with the exception of Pt supported on the molybdenum-terminated Mo 2 C, adsorb H comparably to a pristine Pt(111) surface and their high activity for the hydrogen evolution reaction is predicted. Additionally, at higher coverages supported Pt monolayers interact with atomic hydrogen unlike the Pt(111), suggesting that the activity of the supported and unsupported platinum toward hydrogen evolution reaction have different origins. Furthermore, the position of the supported platinum monolayers on the volcano curve is a function of the surface coverage, more so than for extended metal surfaces. Therefore, hydrogen surface coverage is a key variable to understand the catalytic potential, approaching towards an improved model for screening of electrocatalytic systems.

36 MATERIALS SCIENCE↗

First-Principles Search for Efficient Activators for LaI3

First-principles calculations were performed using density functional theory with Hubbard corrections or hybrid exchange-correlation functionals, as well as the GW approximation, to identify activator dopants that could maximize the light yield of LaI3, a potentially very bright scintillator. The dopants considered in this work included a series of lanthanide ions (Ce, Pr, Nd, Eu, Gd, and Tb) and several ns2 ions (Tl, Pb, Sb, and Bi). Based on both ground-state calculations and constrained DFT calculations to simulate excited states, the trivalent lanthanide dopants were shown not to constitute an improvement over Ce3+, for which experimental data exist, as they showed occupied 4f states below the valence band maximum (VBM) and 5d states above the conduction band maximum (CBM). In contrast, the only divalent lanthanide considered, Eu2+, displayed occupied 4f states within the band gap of the host, but its 5d states were calculated to be above the CBM. Eu2+ could nonetheless be exploited as an activator by increasing the band gap energy slightly through substitution of iodide ions by bromide ions. Similar results were obtained for Tl+. Finally, Bi3+ and Sb3+ were predicted to be efficient activators in LaI3 by virtue of having unoccupied p states below the CBM, which can serve as electron traps and can combine with holes at the VBM to form localized emission centers. Comparison with empirical relationships of the relative positions of the energy levels of rare-earth dopants and implications for efficient doping schemes and scintillation mechanisms in LaI3 are also discussed.

Wu, Dangxin↗

Effect of van der Waals interactions on the structural and binding properties of GaSe

The influence of van der Waals interactions on the lattice parameters, band structure, elastic moduli and binding energy of layered GaSe compound has been studied using projector-augmented wave method within density functional theory. We employed the conventional local/semilocal exchange-correlation functionals and recently developed van der Waals functionals which are able to describe dispersion forces. It is found that application of van der Waals density functionals allows to substantially increase the accuracy of calculations of the lattice constants a and c and interlayer distance in GaSe at ambient conditions and under hydrostatic pressure. The pressure dependences of the a-parameter, Ga–Ga, Ga–Se bond lengths and Ga–Ga–Se bond angle are characterized by a relatively low curvature, while c(p) has a distinct downward bowing due to nonlinear shrinking of the interlayer spacing. From the calculated binding energy curves we deduce the interlayer binding energy of GaSe, which is found to be in the range 0.172–0.197 eV/layer (14.2–16.2 meV/Å{sup 2}). - Highlights: • Effects of van der Waals interactions are analyzed using advanced density functionals. • Calculations with vdW-corrected functionals closely agree with experiment. • Interlayer binding energy of GaSe is estimated to be 14.2–16.2 meV/Å{sup 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photodissociation and Theory to Investigate Uranium Oxide Cluster Cations

Uranium oxide cluster cations of the form U n O m + are produced by laser vaporization of a depleted uranium rod in a pulsed supersonic expansion. Ions are mass-analyzed and mass-selected with a time-of-flight spectrometer and studied with UV laser multiphoton dissociation. Cations of the stoichiometry UO 2 (UO 3 ) n + were observed as photofragments from all photodissociated cluster cations. (UO 3 ) n + clusters were also observed to result from dissociation of larger (UO 3 ) n + clusters, with UO 3 neutral as a common leaving group. Electronic structure calculations were used to investigate the stability of the prominent uranium oxide cluster cations using density functional theory (DFT) with the hybrid B3LYP exchange-correlation functional and at the CCSD(T) level and cc-pVnZ-PP basis sets (n = D,T), including diffuse orbitals as computational expense and availability permitted. Clustering energies, relative energies and dissociation energies of the cations are reported. The lowest energy neutral (UO 3 ) n clusters up to n = 3 are rings, n = 4 and 5 are chains with very low energy rings, and n = 6 is 3D. Finally, the lowest energy structures for UO 2 (UO 3 ) n + are composed of uranyl-like UO 2 + units bound by bridging oxygens to other UO 2 2+ units for n = 2 and 3, and for n = 4 a more complex 3D structure is predicted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Theoretical Benchmark of the Geometric and Optical Properties for 3d Transition Metal Nanoclusters via Density Functional Theory

Understanding structure–property relationships in atomically precise metal nanoclusters is vital in finding selective and tunable catalysts. Here, in this study, density functional theory (DFT) was used to benchmark seven exchange correlation functionals at different basis sets for 17 atomically precise nanoclusters against experimentally determined geometries, band gaps, and optical gaps. The set contains both monometallic and bimetallic clusters that possess at least two types of 3d transition metals (specifically, Cu, Ni, Fe, or Co). The benchmark highlights that PBE0 is a good functional to use regardless of the basis set, and Minnesota functionals do well with respect to specific metals. Further, while long-range corrected functionals overestimate band and optical gaps, they model absorption features better than the other considered functionals. The study additionally looks at the photoinduced hydrogen evolution reaction (HER) and the CO 2 reduction mechanism on nanoclusters reported from the literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

HLE17: An Efficient Way To Predict Band Gaps of Complex Materials

The recently developed HLE 17 exchange-correlation functional, which is a local functional with high local exchange, is tested for determining the band gaps of various kinds of semiconductors and insulators, including metal organic frameworks (MOFs), covalent organic frameworks (COFs), perovskites, zeolites, and others. The calculated band gaps are compared to those calculated by more conventional functionals, in particular PBE, PBEsol, PBE+U, and HSE06. The HLE 17 functional is found to be more accurate PBE, PBEsol, and PBE+U and almost as accurate as the much more expensive HSE06. For the MOFs, HLE 17 is as accurate as HSE06 with almost 100 times less computational cost. As a result, the HLE 17 functional is found to be more accurate than the hybrid functional for covalent organic frameworks (COFs), β-GaSe, and BC 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Learning local and semi-local density functionals from exact exchange-correlation potentials and energies

Finding accurate exchange-correlation (XC) functionals remains the defining challenge in density functional theory (DFT). Despite 40 years of active development, attaining general purpose chemical accuracy is still elusive with existing functionals. We present a data-driven pathway to learn the XC functional by using the exact density, XC energy, and XC potential. While the exact densities are obtained from accurate configuration interaction (CI), the exact XC energies and XC potentials are obtained via inverse DFT calculations on the CI densities. We demonstrate how simple neural network (NN)–based local density approximation (LDA) and generalized gradient approximation (GGA), trained on just five atoms and two molecules, provide remarkable improvement in total energies and densities. Particularly, the NN-based GGA functional attains similar accuracy as the higher rung SCAN meta-GGA on various thermochemistry datasets. These results underscore the promise of using the XC potential in modeling XC functionals and can pave the way for systematic learning of increasingly accurate XC functionals.

Science & Technology - Other Topics↗

GDB-9-Ex_TD-DFT-PBE0: Dataset containing Time Dependent Density Functional Theory (TDDFT) calculations for organic molecules of the GDB-9-Ex dataset.

This dataset contains data-intensive quantum chemical electronic structure calculations for 96,766 organic molecules of the GDB-9-Ex dataset. Calculations were performed using the Time Dependent Density Functional Theory (TDDFT) first principles method using the ORCA software. It provides UV-vis spectra calculations of molecules with a high level of accuracy. The optical spectra behavior was collected based on the optimized molecular geometries in the DFTB method with 3ob parameters. All calculations utilized the def2-TZVP basis sets with the auxiliary def2/J and def2-TZVP/C basis sets. The time-dependent density-functional theory (TDDFT) approach with the PBE0 exchange-correlation functional and ORCAs default integration grid was employed. For the excitation energy calculations, the lowest 50 excitation states were calculated.

AI dataset↗

Toward improved property prediction of 2D materials using many-body quantum Monte Carlo methods

The field of 2D materials has grown dramatically in the past two decades. 2D materials can be utilized for a variety of next-generation optoelectronic, spintronic, clean energy, and quantum computing applications. These 2D structures, which are often exfoliated from layered van der Waals materials, possess highly inhomogeneous electron densities and can possess short- and long-range electron correlations. The complexities of 2D materials make them challenging to study with standard mean-field electronic structure methods such as density functional theory (DFT), which relies on approximations for the unknown exchange-correlation functional. To overcome the limitations of DFT, highly accurate many-body electronic structure approaches such as diffusion Monte Carlo (DMC) can be utilized. In the past decade, DMC has been used to calculate accurate magnetic, electronic, excitonic, and topological properties in addition to accurately capturing interlayer interactions and cohesion and adsorption energetics of 2D materials. Here, this approach has been applied to 2D systems of wide interest, including graphene, phosphorene, MoS 2 , CrI 3 , VSe 2 , GaSe, GeSe, borophene, and several others. In this review article, we highlight some successful recent applications of DMC to 2D systems for improved property predictions beyond standard DFT.

2D materials↗

Hierarchy of model Kohn–Sham potentials for orbital-dependent functionals: A practical alternative to the optimized effective potential method

We describe a method for constructing a hierarchy of model potentials approximating the functional derivative of a given orbital-dependent exchange-correlation functional with respect to electron density. Each model is derived by assuming a particular relationship between the self-consistent solutions of Kohn–Sham (KS) and generalized Kohn–Sham (GKS) equations for the same functional. In the KS scheme, the functional is differentiated with respect to density, in the GKS scheme—with respect to orbitals. The lowest-level approximation is the orbital-averaged effective potential (OAEP) built with the GKS orbitals. The second-level approximation, termed the orbital-consistent effective potential (OCEP), is based on the assumption that the KS and GKS orbitals are the same. It has the form of the OAEP plus a correction term. The highest-level approximation is the density-consistent effective potential (DCEP), derived under the assumption that the KS and GKS electron densities are equal. The analytic expression for a DCEP is the OCEP formula augmented with kinetic-energy-density-dependent terms. In the case of exact-exchange functional, the OAEP is the Slater potential, the OCEP is roughly equivalent to the localized Hartree–Fock approximation and related models, and the DCEP is practically indistinguishable from the true optimized effective potential for exact exchange. All three levels of the proposed hierarchy require solutions of the GKS equations as input and have the same affordable computational cost.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗