Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Er”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

350 mJ electro-optically Q-switched 2.79 µm Cr:Er:YSGG MOPA

We report on developing three flashlamp-pumped electro-optically Q-switched Cr:Er:YSGG lasers with the Q-switch based on a La 3 Ga 5 SiO 14 crystal. The “short” laser cavity was optimized for high peak power applications. In this cavity, 300 mJ output energy in 15 ns pulses at a 3 Hz repetition rate was demonstrated with pump energy below 52 J. However, several applications, such as Fe:ZnSe pumping in a gain-switched regime, require longer (∼ 100 ns) pump pulse duration. We developed a 2.9 m long laser cavity that delivers 190 mJ of output energy in 85 ns pulses for these applications. We also demonstrated the Cr:Er:YSGG MOPA system producing 350 mJ output energy at 90 ns pulse duration and 47.5 J of pumping, corresponding to an amplification factor of 3.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

SINGLE BUNCH TRACKING ON THE TEN-PASS ER@CEBAF ENERGY RECOVERY BEAMLINE

The proposed ten-pass energy recovery linac (ERL) demonstration (five accelerating, five decelerating) at the CEBAF accelerator, ER@CEBAF, involves a multi-GeV en- ergy range of a continuous electron beam. New CEBAF transverse optics were designed for this ERL demonstration. This redesign incorporates additional components in Arc A, including a path length chicane and new quadrupoles to ensure proper dispersion localization. The new five energy recovery passes with a shared arc transport scheme chal- lenge the overall beamline optics design, including large beta functions in the CEBAF spreaders and recombiners. Here we discuss results of bunch tracking performed using the elegant tracking code for the full ER@CEBAF beamline

Neththikumara, I.↗
DOE OSTI2020

Low-Energy Electron Elastic Total Cross Sections for Ho, Er, Tm, Yb, Lu, and Hf Atoms

The robust Regge-pole methodology wherein is fully embedded the essential electron-electron correlation effects and the vital core polarization interaction has been used to explore negative ion formation in the large lanthanide Ho, Er, Tm, Yb, Lu, and Hf atoms through the electron elastic total cross sections (TCSs) calculations. These TCSs are characterized generally by dramatically sharp resonances manifesting ground, metastable, and excited negative ion formation during the collisions, Ramsauer-Townsend minima, and shape resonances. The novelty and generality of the Regge-pole approach is in the extraction of the negative ion binding energies (BEs) of complex heavy systems from the calculated electron TCSs. The extracted anionic BEs from the ground state TCSs for Ho, Er, Tm, Yb, Lu, and Hf atoms are 3.51 eV, 3.53 eV, 3.36 eV, 3.49 eV, 4.09 eV and 1.68 eV, respectively. The TCSs are presented and the extracted from the ground; metastable and excited anionic states BEs are compared with the available measured and/or calculated electron affinities. We conclude with a remark on the existing inconsistencies in the meaning of the electron affinity among the various measurements and/or calculations in the investigated atoms and make a recommendation to resolve the ambiguity.

Felfli, Zineb↗
NASA NTRS1984

Ocean wind field measurement performance of the ERS-1 scatterometer

The Active Microwave Instrumentation (AMI), which will be implemented on the ERS-1, is a 5.3 GHz multipurpose radar for land surface imaging, ocean wave spectrum measurement and wind observations over oceans. The imaging and wave measurements apply Synthetic Aperture Radar (SAR) techniques, while wind field detection is performed by the Scatterometer as part of the AMI. The Scatterometer system design was developed and optimized with the aid of a performance simulator. This paper, aimed at giving an overview, is presented about the: (1) ERS-1 Scatterometer system design; (2) Error budget; and the (3) Overall calibration concept.

Hans, P.↗
NASA NTRS1988

The meteorological measurement system on the NASA ER-2 aircraft

A Meteorological Measurement System (MMS) was designed for the high-altitude ER-2 aircraft (NASA 706). Through dedicated instrumentation installed on the aircraft and repeated calibrations, the MMS provides accurate in situ measurements of free-stream pressure, temperature, and the wind vector. The MMS has participated in two major high-altitude scientific expeditions, the Stratosphere-Troposphere Exchange Project (STEP) based in northern Australia and the Airborne Antarctic Ozone Experiment (AAOE) based in southern Chile. Key MMS subsystems are described. The MMS consists of a dedicated inertial navigation system (INS), a randome differential pressure system, a data acquisition system, and air data instrumentation. The MMS incorporates a high-resolution INS (Litton LIN-72RH model), which is specially configured and is updated at 25 Hz. The differential pressure system, consisting of two sets of pressure ports and transducers, is installed in the ER-2 radome to provide sensitive measurements of the airflow angles (angle of attack and angle of sideslip). The data acquisition system was designed to meet aircraft requirements of compactness and light weight (2 cu ft 50 lb) and for MMS requirements to sample, control, process, and store 45 parameters (some redundant) at a sampling rate up to 10 Hz. The MMS data are stored both in a tape recorder (20 MB) and a hermatically-sealed winchester hard disc (10 MB). Special and redundant instrumentation for temperature and pressure measurements were also installed on the aircraft.

Scott, Stan G.↗
NASA NTRS1988

ER-2 lidar observations from the October 1986 fire cirrus experiment

A description of the ER-2 lidar data characteristics and available products, plus flight times and locations is presented for the FIRE cirrus experiment of October 13 through November 2, 1986. The CALS airborne lidar was flown for this experiment on the NASA ER-2 high altitude aircraft. The primary objectives of the CALS observations were to intensively measure cirrus cloud top height and structure for basic cirrus studies and for validation of satellite cloud retrievals.

Spinhirne, J. D.↗
NASA NTRS1990

A comparative study of infrared radiance measurements by an ER-2 based radiometer and the LANDSAT 5 Thematic Mapper (TM-6)

Infrared radiance measurements were acquired from a radiometer on the NASA ER-2 during a coincident LANDSAT 5 overpass on 28 Oct. 1986 as part of the FIRE Cirrus IFO in the vicinity of Lake Michigan. A comparative study is made to infer microphysical properties of the cirrus cloud field. Radiances are derived from the image by convolving the ER-2 radiometer's effective field of view along the flight path. A multistream radiative transfer model is used to account for the differences in spectral bandwidths, 10.40 to 12.50 microns for the LANDSAT band and 9.90 to 10.87 microns for the radiometer.

Hammer, Philip D.↗
NASA NTRS1990

Ice saturation at the tropopause observed from the ER-2 aircraft

Ice saturation at or just above the tropopause was frequently observed during the ER-2 vertical profiles over Stavanger (59 deg N) during the Airborne Arctic Stratospheric Expedition (AASE). On occasion, ice saturation extended as much as 500 m above the tropopause. Saturation was not observed over Punta Arenas (53 deg S) during the Airborne Antarctic Ozone Experiment. Saturation extending just above the tropopause was observed at Moffett Field (38 deg N) in winter but not in summer. The top of a thick cirrus layer at the tropopause will be very strongly cooled, and a thin cloud layer at the tropopause will either be strongly heated or cooled depending on the presence of lower level clouds. Some ER-2 data suggests removal of water and nitrogen species from the tropopause.

Murphy, D. M.↗
NASA NTRS1990

Reconstruction of O3 and N2O fields from ER-2, DC-8, and balloon observations

Measurements of N2O and O3 during the Airborne Arctic Stratospheric Expedition have been composited using the potential vorticity and potential temperature of each measurement as coordinates. For ozone, data sources included the ER-2 and balloon ozonesonde in situ measurements, DC-8 DIAL lidar, and Stratospheric Aerosol and Gas Experiment satellite profiles. For N2O, only ER-2 data were used. These chemical composites have been reconstructed onto average meteorological fields for the mission in a latitude-altitude cross section, yielding a picture of the chemical composition of the polar vortex during this period. Tracers inside the vortex show an apparent descent of about 2 km relative to those outside, resulting in an apparent chemical edge on isentropic and isobaric surfaces.

Schoeberl, Mark R.↗
NASA NTRS1991

Calibration of the ER-2 meteorological measurement system

The Meteorological Measurement System (MMS) on the high altitude ER-2 aircraft was developed specifically for atmospheric research. The MMS provides accurate measurements of pressure, temperature, wind vector, position (longitude, latitude, altitude), pitch, roll, heading, angle of attack, angle of sideslip, true airspeed, aircraft eastward velocity, northward velocity, vertical acceleration, and time, at a sample rate of 5/s. MMS data products are presented in the form of either 5 or 1 Hz time series. The 1 Hz data stream, generally used by ER-2 investigators, is obtained from the 5 Hz data stream by filtering and desampling. The method of measurement of the meteorological parameters is given and the results of their analyses are discussed.

Bowen, Stuart W.↗
NASA NTRS1991

Applications of the ER-2 meteorological measurement system

The NASA ER-2 aircraft is used as a platform for high altitude atmospheric missions. The Meteorological Measurement System (MMS) was developed specifically for atmospheric research to provide accurate high resolution measurements of pressure, temperature, and the 3-D wind vector with a sampling rate of 5/s. The MMS consist of three subsystems: (1) an air motion sensing system to measure the velocity of the air with respect to the aircraft; (2) a high resolution inertial navigation system (INS) to measure the velocity of the aircraft with respect to the earth; and (3) a data acquisition system to sample, process, and record the measurement quantities. MMS data have been used extensively by ER-2 investigators in elucidating the polar ozone chemistry. Herein, applications on atmospheric dynamics are emphasized. Large scale (polar vortex, potential vorticity, model atmosphere), mesoscale (gravity waves, mountain waves) and microscale (heat fluxes) atmospheric phenomena are investigated and discussed.

Chan, K. Roland↗
NASA NTRS1990

The ER-2 meteorological measurement system

The objectives of ER-2 Meteorological Measurement System (MMS) are: (1) to measure the meteorological parameters (pressure, temperature, and the three dimensional wind vector) accurately; (2) to provide high resolution data on atmospheric state variables and aircraft flight track to ER-2 investigators on a timely basis; and (3) to conduct collaborative research in atmospheric dynamics and chemistry. A summary of progress and results are presented.

Chan, K. Roland↗
NASA NTRS1992

Preliminary analysis of ERS-1 SAR for forest ecosystem studies

An image obtained by the C-band VV-polarized ERS-1 SAR is examined with respect to potential land applications. A scene obtained near noon on August 15, 1991, along the U.S.-Canadian border near Sault Ste. Marie is calibrated relative to an array of trihedral corner reflectors and active radar calibrators distributed across the swath. Extensive contemporaneous ground observations of forest stands are used to predict the radar backscattering coefficient sigma at the time of the SAR overpass using a first-order vector radiative transfer model. These predictions generally agree with the calibrated ERS-1 data to within 1 dB. It is demonstrated that the dynamic range of sigma is sufficient to perform limited discrimination of various forest and grassland communities even for a single-date observation. Furthermore, retrieval of near-surface soil moisture is feasible for grass-covered soils when plant biomass is less than 1 tonne/ha.

Dobson, M. G.↗
NASA NTRS1993

ER-2 investigations of lightning and thunderstorms

The primary objective of the ER-2 lightning program is to investigate relationships between lightning and storm electrification and a number of underlying and interrelated phenomena including the structure, dynamics, and evolution of thunderstorms and thunderstorm systems, precipitation distribution and amounts, atmospheric chemistry processes, and the global electric circuit. This research is motivated by the desire to develop an understanding needed for the effective utilization and interpretation of data from the Lighting Imaging Sensor (LIS), the Lightning Mapper Sensor (LMS), and other satellite-based lightning detectors planned for the late 1900's and early 2000's. These satellite lightning detection systems will be characterized by high detection efficiencies (i.e., 90 percent) and the capability to detect both intracloud and cloud-to-ground discharges during day and night. The Lightning Imaging Sensor (LIS) is being developed by NASA for the Tropical Rainfall Measuring Mission (TRMM) satellite. In the ER-2 and related investigations, the emphasis is on establishing quantitative relationships and developing practical algorithms that employ lightning data, such as could be derived from satellite observations of optical lightning emissions, as the independent variable. Significant accomplishments made during the past year are presented.

Blakeslee, Richard↗
NASA NTRS1992

ERS-1 SAR ice routing of l'Astrolabe through the Northeast passage

The use of Synthetic Aperture Radar (SAR) data from the satellite ERS-1 to assist the French polar vessel 'L'Astrolabe' during its navigation through Artic sea ice in the Northeast Passage is reported. The ship spent one month on the voyage from Europe to Japan, and high resolution SAR images and ice maps based on SAR images from ERS-1 and Special Sensor Microwave/Imager were telefaxed to the ship using the Inmarsat system. The time delay from observation to the reception of SAR images aboard the ship varied from 6 hours to two days. The quality of these ice maps was compared with Russian ice maps and observations from the ship. The SAR imagery provided detailed information on ice floe distribution, ice concentration, ice types, open leads, and tracks in ice from icebreakers. The response from the Russian ice specialists on the quality of the SAR ice maps was very positive.

Johannessen, O. M.↗
NASA NTRS1992

Topographic mapping from ERS-1 and SEASAT radar interferometry

A radar interferometric technique for topographic mapping of surfaces yields a high resolution, globally consistent approach to generation of digital elevation models. The technique is illustrated with maps generated from SEASAT and European Space Agency Remote Sensing Satellite (ERS-1) data. A SEASAT interferometric image of a forested area which includes some unvegetated lava flows is analyzed. An analysis of errors expected from application of the technique to maps generated from ERS-1 data is presented. An orbital scenario for a global mapping mission is outlined.

Zebker, Howard A.↗
NASA NTRS1992

Monitoring of environmental conditions in the Alaskan forests using ERS-1 SAR data

Preliminary results from an analysis of the multitemporal radar backscatter signatures of tree species acquired by European Remote Sensing Satellite (ERS-1) synthetic aperture radar (SAR) data are presented. Significant changes in radar backscatter are detected. Correlation of these differences with ground truth observations indicate that these are due to changes in soil and liquid water content as a result of freeze/thaw events. C-band observations acquired by the NASA/Jet Propulsion Laboratory Airborne SAR (JPL AIRSAR) instrument demonstrate the potential of a C-band radar instrument to monitor drought/flood events. The potential of ERS-1 for monitoring phenologic changes in the forest and for classifying tree species is less promising.

Rignot, Eric↗
NASA NTRS1992

Alaska SAR processor implementation of E-ERS-1

The synthetic aperture radar (SAR) data processing algorithm used by the Alaska SAR Facility (ASF) for the European Space Agency's first Remote-Sensing Satellite (E-ERS-1) SAR data are examined. Preprocessing highlights two features: signal measurement, which includes signal-to-noise ratio, replica measurement, and noise measurement; and Doppler measurement, which includes clutter lock and autofocus. The custom pipeline architecture performs the main processing with controls at the input interface, range correlator, corner-turn memory, azimuth correlator, and multi-look memory. The control software employs a flexible control scheme. The Committee on Earth Observation Satellites (CEOS) format encapsulates the ASF products. System performance for SAR image processing of E-ERS-1 data is reviewed.

Cuddy, David↗