Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Emissivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Integrated system to reduce emissions from natural gas-fired reciprocating engines

Natural gas-fired reciprocating engines (NGFRE), which are naturally aspirated are used in the oil and gas industry for the production, storage, processing, and transmission of natural gas extracted from wells. These stationary, lean-burn engines exhibit increased combustion instability and higher emissions of methane (CH 4 ) and Volatile Organic Compounds (VOCs) at lower loads, resulting in restrictions on the operational envelope of such engines. Here, in this paper, some of the emission reduction technologies for NGFREs are reviewed. Also, an experimental investigation of an integrated system to reduce emissions and improve the combustion performance of an NGFRE is presented. The integrated system consists of an air management package and integrated sensors including an amperometric NOx/O 2 sensor, exhaust temperature thermocouple, pressure transducers and vibration sensors. Experiments were carried out using natural gas and natural gas/propane blends at different load steps, and combustion performance, as well as emissions, were analyzed. For natural gas fuel, the results show that the standard deviation of peak pressure and indicated thermal efficiency (ITE) improved by 67.4 psi and 4.2% respectively, at 40% load. Similarly, CH 4 and Nitrogen Oxides (NOx) emissions reduced considerably by 84% and 63% respectively. However, CO emissions increased from 8 ppm to 152 ppm. At 60% load, the ITE improved by 3.8% and the CH 4 emissions were reduced by 68%. The reduction in VOCs emissions was 63% at 40% load and 69% at 60% load. The findings of this research provide evidence of the effectiveness of the integrated air management system in improving the sustainability of NGFREs. In general, this technology can be implemented on air-assisted combustion applications to improve combustion performance and, consequently, reduce emissions.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

Methane Emissions from Gathering Compressor Stations in the U.S.

Using results from a nationally representative measurement campaign at 180 gathering compressor stations conducted with nine industry partners, this study estimated emissions for the U.S. gathering sector, where sector-specific emission factors have not been previously available. The study drew from a partner station population of 1705 stations—a significantly larger pool than was available for prior studies. Data indicated that whole gas emission rates from components on gathering stations were comparable to or higher than emission factors utilized by the EPA’s greenhouse gas reporting program (GHGRP) but less than emission factors used for similar components on transmission compressor stations. Field data also indicated that the national population of stations likely has a higher fraction of smaller stations, operating at lower throughput per station, than the data used to develop the per-station emission factor used in EPA’s greenhouse gas inventory (GHGI). This was the first national study to incorporate extensive activity data reported to the GHGRP, including 319 basin-level reports, covering 15,895 reported compressors. Further, combining study emission data with 2017 GHGRP activity data, the study indicated statistically lower national emissions of 1290 [1246–1342] Gg methane per year or 66% [64–69%] of current GHGI estimates, despite estimating 17% [12–22%] more stations than the 2017 GHGI (95% confidence interval). Finally, we propose a replicable method that uses GHGRP activity data to annually update GHGI gathering and boost sector emissions.

03 NATURAL GAS↗
DOE OSTI2024

Thermal-Strain-Enabled Enhanced Emission from UV Laser-Induced Defect Levels near the Surface of Multilayer MoS 2

Monolayer two-dimensional (2D) materials have been intensively studied while research on multilayers is still in its infancy. Here, we induce defects inside bulk MoS 2 through thermal annealing and near the surface of multilayer MoS 2 using 375 nm laser irradiation, and investigate their photoluminescence (PL) and fluorescence lifetime imaging (FLIM). Enhanced emission is limited within a certain MoS 2 thickness. The observed enhanced emission is evidenced by a threshold behavior in super-linear PL intensity increase, strong polarization effects, and increased lifetime of defect peak. The laser power threshold for enhanced emission is much smaller in defects near the surface than that inside the bulk of multilayer MoS 2 . The mechanical strain from a wrinkle of the sample further lowers the laser power threshold for enhanced emission. By exciting with a 639 nm laser that is close to the fundamental gap between the conduction band minimum and the valence band maximum, the lifetime of defect enhanced emission increased by 5 times. Furthermore, one of the competing indirect bandgap emissions disappears, and the defect emission peak dominates the PL spectrum in the wrinkle area with a strain. Furthermore, the discovered principle can be applied to future studies on the integration of enhanced emission and single photon emission involving selectively depopulating the conduction band of the host crystal to defect levels for quantum emitters.

2D materials↗
DOE OSTI2021

Multipoint Observations of Quasiperiodic Emission Intensification and Effects on Energetic Electron Precipitation

The two Van Allen Probes simultaneously recorded a coherently modulated quasiperiodic (QP) emission that persisted for 3 h. The magnetic field pulsation at the locations of the two satellites showed a substantial difference, and their frequencies were close to but did not exactly match the repetition frequency of QP emissions for most of the time, suggesting that those coherent QP emissions probably originated from a common source, which then propagated over a broad area in the magnetosphere. The QP emissions were amplified by local anisotropic electron distributions, and their large-scale amplitudes were modulated by the plasma density. A novel observation of this event is that chorus waves at frequencies above QP emissions exhibit a strong correlation with QP emissions. Those chorus waves intensified when the QP emissions reach their peak frequency. This indicates that embryonic QP emissions may be critical for its own intensification as well as chorus waves under certain circumstances. A Low-Earth-Orbit POES satellite observed enhanced energetic electron precipitation in conjunction with the Van Allen Probes, providing direct evidence that QP emissions precipitate energetic electrons into the atmosphere. Finally, this scenario is quantitatively confirmed by our quasilinear diffusion simulation results.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Urban NO x emissions around the world declined faster than anticipated between 2005 and 2019

Emission inventory development for air pollutants, by compiling records from individual emission sources, takes many years and involves extensive multi-national effort. A complementary method to estimate air pollution emissions is in the use of satellite remote sensing. In this study, NO 2 observations from the Ozone Monitoring Instrument are combined with re-analysis meteorology to estimate urban nitrogen oxide (NO X ) emissions for 80 global cities between 2005 and 2019. The global average downward trend in satellite-derived urban NO X emissions was 3.1%–4.0% yr -1 between 2009 and 2018 while inventories show a 0%–2.2% yr -1 drop over the same timeframe. This difference is primarily driven by discrepancies between satellite-derived urban NO X emissions and inventories in Africa, China, India, Latin America, and the Middle East. In North America, Europe, Korea, Japan, and Australasia, NO X emissions dropped similarly as reported in the inventories. In Europe, Korea, and Japan only, the temporal trends match the inventories well, but the satellite estimate is consistently larger over time. While many of the discrepancies between satellite-based and inventory emissions estimates represent real differences, some of the discrepancies might be related to the assumptions made to compare the satellite-based estimates with inventory estimates, such as the spatial disaggregation of emissions inventories. Overall, our work identifies that the three largest uncertainties in the satellite estimate are the tropospheric column measurements, wind speed and direction, and spatial definition of each city.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Greenhouse gas emissions embodied in the U.S. solar photovoltaic supply chain

Abstract Solar photovoltaic (PV) electricity is considered to be an important source of electricity generation in the quest for net-zero carbon emissions. However, the growth of solar electricity is creating both increased material demands and increased greenhouse gas (GHG) emissions from silicon and PV manufacturing (also referred to as embodied GHG emissions of solar electricity). Here we analyze the silicon and solar PV supply chain for the United States (U.S.) market and find that the embodied GHG emissions of solar PV panel materials (such as silicon), manufacture, logistics, and installation in the U.S. given the current supply chain are 36 g CO 2 e kWh −1 of solar electricity generated. Eighty-five percent of the embodied GHG emissions are from PV panel production processes in China and other Asia–Pacific countries. Moving the silicon and PV manufacturing to the U.S. would reduce the embodied GHG emissions of solar electricity by 16% from its current level, primarily because of the lower GHG emission intensity of the U.S. electrical grid and the lower GHG emissions for aluminum electrolysis in North America. Future scenario analysis shows that by 2030, with the U.S. PV domestic supply chain and its decarbonized grid electricity and aluminum production, as well as improving PV conversion efficiency, the embodied GHG emissions of solar electricity in the U.S. will be reduced to 21 g CO 2 e kWh −1 .

14 SOLAR ENERGY↗
DOE OSTI2024

Implications of an emission trading scheme for India’s net-zero strategy: a modelling-based assessment

To help meet its near-term NDC goals and long-term net-zero 2070 target, the Government of India has planned to establish a Carbon Credit Trading Scheme (CCTS), i.e. a domestic emission trading scheme (ETS). An ETS is an inherently cost-effective policy instrument for emission reduction, providing the greatest flexibility to reduce emissions from within and across sectors. An effective ETS requires design features that consider country-specific challenges and reflect its role within the larger policy package to achieve long-term emission reduction. Within the Indian context and in this study we therefore investigate—(i) what might be the role of the ETS in achieving India’s long-term mitigation targets? (ii) How might the various sectors interact under an emissions cap? (iii) How might the ETS interact with existing energy and climate policies? We do this analysis by running four main scenarios using the integrated assessment model GCAM (v6.0), adapted to India-specific assumptions and expectations. These scenarios are—(i) NZ (net-zero), (ii) NZ + ETS, (iii) NZ + CC (command and control), and (iv) NZ + RPO (renewables purchase obligations) + ETS. The NZ scenario assumes India’s near-term and long-term climate commitments of net zero by 2070. Scenarios with ETS (ii) and (iv) apply an emissions cap on four sectors—electricity, iron and steel, cement, and fertilizer. The scenario with CC applies a homogenous emission cap on each of the chosen sectors but does not allow cross-sectoral trading. The last scenario includes renewables purchase obligations (RPOs along with an ETS. We show that under a specific ETS emissions cap: (i) the electricity sector emerges as the largest source of cost-effective greenhouse gas (GHG) reduction options; (ii) ETS with trading across sectors is around 24% more cost-effective than ETS with trading only within sectors, (iii) RPOs can be complementary to an ETS although the impact of RPOs on GHG reductions in the electricity sector would need to be considered when setting the level of the ETS cap (or emissions intensity targets) or the RPO targets to avoid low carbon prices, and (iv) the direction and volume of financial transfers across sectors depends on allocation targets set by the government. Based on these results we provide design recommendations for India’s ETS.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Observation of Seeded Mn K β Stimulated X-Ray Emission Using Two-Color X-Ray Free-Electron Laser Pulses

Kβ x-ray emission spectroscopy is a powerful probe for electronic structure analysis of 3d transition metal systems and their ultrafast dynamics. Selectively enhancing specific spectral regions would increase this sensitivity and provide fundamentally new insights. Recently we reported the observation and analysis of Kα amplified spontaneous x-ray emission from Mn solutions using an x-ray free-electron laser to create the 1s core-hole population inversion [Kroll et al., Phys. Rev. Lett. 120, 133203 (2018)]. To apply this new approach to the chemically more sensitive but much weaker Kβ x-ray emission lines requires a mechanism to outcompete the dominant amplification of the Kα emission. Here we report the observation of seeded amplified Kβ x-ray emission from a NaMnO 4 solution using two colors of x-ray free-electron laser pulses, one to create the 1s core-hole population inversion and the other to seed the amplified Kβ emission. Comparing the observed seeded amplified Kβ emission signal with that from conventional Kβ emission into the same solid angle, we obtain a signal enhancement of more than 10 5 . Finally, our findings are the first important step of enhancing and controlling the emission of selected final states of the Kβ spectrum with applications in chemical and materials science.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Computational study on the impact of gasoline-ethanol blending on autoignition and soot/NO x emissions under low-load gasoline compression ignition conditions

Here, in the present work, computational fluid dynamics (CFD) simulations of a single-cylinder gasoline compression ignition (GCI) engine are performed to investigate the impact of gasoline-ethanol blending on autoignition, nitrogen oxide (NO x ), and soot emissions under low-load conditions. In order to represent the test gasoline (RD5-87), a four-component toluene primary reference fuel (TPRF)+ethanol (ETPRF) surrogate (with 10% ethanol by volume; E10) is employed. A three-dimensional (3D) engine CFD model employing finite-rate chemistry with a skeletal kinetic mechanism (including NO x sub-mechanism), adaptive mesh refinement (AMR), and hybrid method of moments (HMOM) is adopted to capture the in-cylinder combustion phenomena and soot/NO x emissions. The engine CFD model is validated against experimental data for three gasoline-ethanol blends: E10, E30 and E100, with varying ethanol content by volume. Model validation is carried out for a broad range of start-of-injection (SOI) timings (−21, −27, −36, and −45 crank angle degrees (°CA) after top-dead-center (aTDC)) with respect to in-cylinder pressure, heat release rate, combustion phasing, NO x and soot emissions. For relatively later injection timings (−21 and −27 °CA aTDC), E30 yields higher amount of soot than E10; while the trend reverses for early injection cases (−36 and −45 °CA aTDC ). On the other hand, E100 yields the lowest amount of soot among all fuels irrespective of SOI timing. Further, E10 shows a non-monotonic trend in soot emissions with SOI timing: SOI-36>SOI-45>SOI-21>SOI-27, while soot emissions from E30 exhibit monotonic decrease with advancing SOI timing. NO x emissions from various fuels follow a trend of E10>E30>E100. On the other hand, NO x emissions increase as SOI timing is advanced for all fuels, with an anomaly for E10 and E100 where NO x decreases when SOI is advanced beyond −36 °CA aTDC. Detailed analysis of the numerical results is performed to investigate the soot/NO x emission trends and elucidate the impact of chemical composition and physical properties on autoignition and emissions characteristics.

Computational fluid dynamics↗
DOE OSTI2024

Hestia SW-IFL Onroad Fossil Fuel Carbon Dioxide (FFCO2) product: Road segment-level annual FFCO2 emissions across Arizona (2017-2022), version 1.1

The SW-IFL onroad fossil fuel carbon dioxide (FFCO2) emissions data product represents CO2 emissions from the combustion of fossil fuels by motor vehicles (e.g., passenger cars, trucks, buses, motorcycles) traveling on designated roadways. The emissions are represented geographically on each road segment within the state of Arizona spanning the 2017 to 2022 time period. This data product was developed as part of the Southwest Urban Corridor Integrated Field Laboratory (SW-IFL) project, which aims to provide new knowledge and tools that address urban environmental issues by integrating high-resolution observations, modeling, and civic engagement. The emissions data are provided in CSV (input data, ONR_FFCO2_AZ_county.csv) and GeoPackage form (output polyline objects - about 786,000 road segments, XXXX_AZ_v1.1.gpkg) designated by road class (interstates, arterials, collectors, local). The metadata file (Metadata_SW-IFL_Onroad_annualFFCO2_v1.1.docx) provides details about attributes and data formats. The GeoPackage emissions data are provided separately for local roads and nonlocal roads (interstates, arterials, collectors). The method file (Methods_SW-IFL_Onroad_annualFFCO2_v1.1.docx) describes the data processing flow and data sources. Update on 2024-04-17: Updates were made to both the input emission data file (.csv) and output segment-level emission file (.gpkg). There was an update in county-level emission input data (ONR_FFCO2_AZ_county.csv) and the entire road segments were reprocessed to reflect this update.Update on 2024-04-29: Update was made to one output segment-level emission file (Nonlocal_AZ_v1.0.gpkg). There was an error in the AADT values and the data were reprocessed to reflect this update.Update on 2024-10-22: Temporal coverage was extended to include 2022. VMT values were recalculated using new AADT data and the entire road segments were reprocessed to reflect these updates.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Long-Term Methane Emissions Rate Quantification and Alert System for Natural Gas Storage Wells and Fields

The Department of Energy (DOE) National Energy Technology Laboratory (NETL) and other critical stakeholders (e.g., U.S. Environmental Protection Agency (USEPA), state regulators, and industry) seek to more accurately characterize and quantify methane emissions from natural gas storage wells. These efforts will reduce uncertainties in estimates of these emissions in USEPA’s current Green House Gas Inventory (GHGI) under their Greenhouse Gas Reporting Program (GHGRP; EPA, 2016). Emission factors currently used to estimate methane emissions from gas storage wells are the same factors used for onshore natural gas production wells (USEPA, 2016). This study has developed a robust and representative dataset of emissions from disaggregated gas station wellhead components and related emission factors that will inform future enhancements to the GHGI and GHGRP. Extensive methane emissions measurements and meteorological data were collected from three active storage facilities representing two of the three types of storage facilities (i.e., depleted gas reservoir and salt cavern) to support development of emissions factors specifically for gas storage wells and associated components. Methane emissions were quantified from both above-ground components (e.g., pipe fittings and valves) and seepage from the ground surface in proximity to gas storage wellheads.

03 NATURAL GAS↗
DOE OSTI2023

Updating and Evaluating Anthropogenic Emissions for NOAA’s Global Ensemble Forecast Systems for Aerosols (GEFS-Aerosols): Application of an SO 2 Bias-Scaling Method

We updated the anthropogenic emissions inventory in NOAA’s operational Global Ensemble Forecast for Aerosols (GEFS-Aerosols) to improve the model’s prediction of aerosol optical depth (AOD). We used a methodology to quickly update the pivotal global anthropogenic sulfur dioxide (SO 2 ) emissions using a speciated AOD bias-scaling method. The AOD bias-scaling method is based on the latest model predictions compared to NASA’s Modern-Era Retrospective analysis for Research and Applications, version 2 (MERRA2). The model bias was subsequently applied to the CEDS 2019 SO 2 emissions for adjustment. The monthly mean GEFS-Aerosols AOD predictions were evaluated against a suite of satellite observations (e.g., MISR, VIIRS, and MODIS), ground-based AERONET observations, and the International Cooperative for Aerosol Prediction (ICAP) ensemble results. The results show that transitioning from CEDS 2014 to CEDS 2019 emissions data led to a significant improvement in the operational GEFS-Aerosols model performance, and applying the bias-scaled SO 2 emissions could further improve global AOD distributions. The biases of the simulated AODs against the observed AODs varied with observation type and seasons by a factor of 3~13 and 2~10, respectively. The global AOD distributions showed that the differences in the simulations against ICAP, MISR, VIIRS, and MODIS were the largest in March–May (MAM) and the smallest in December–February (DJF). When evaluating against the ground-truth AERONET data, the bias-scaling methods improved the global seasonal correlation (r), Index of Agreement (IOA), and mean biases, except for the MAM season, when the negative regional biases were exacerbated compared to the positive regional biases. The effect of bias-scaling had the most beneficial impact on model performance in the regions dominated by anthropogenic emissions, such as East Asia. However, it showed less improvement in other areas impacted by the greater relative transport of natural emissions sources, such as India. The accuracies of the reference observation or assimilation data for the adjusted inputs and the model physics for outputs, and the selection of regions with less seasonal emissions of natural aerosols determine the success of the bias-scaling methods. A companion study on emission scaling of anthropogenic absorbing aerosols needs further improved aerosol prediction.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Using Atmospheric Inverse Modelling of Methane Budgets with Copernicus Land Water and Wetness Data to Detect Land Use-Related Emissions

Climate change mitigation requires countries to report their annual greenhouse gas (GHG) emissions and sinks, including those from land use, land use change, and forestry (LULUCF). In Finland, the LULUCF sector plays a crucial role in achieving net-zero GHG emissions, as the sector is expected to be a net sink. However, accurate estimates of LULUCF-related GHG emissions, such as methane (CH 4 ), remain challenging. We estimated LULUCF-related CH 4 emissions in Finland in 2013–2020 by combining national land cover and remote-sensed surface wetness data with CH 4 emissions estimated by an inversion model. According to our inversion model, most of Finland’s CH 4 emissions were attributed to natural sources such as open pristine peatlands. However, our research indicated that forests with thin tree cover surrounding open peatlands may also be a significant source of CH 4 . Unlike open pristine peatlands and pristine peatlands with thin tree cover, surrounding transient forests are included in the Finnish GHG inventory if they meet the criteria used for forest land. The current Finnish national GHG inventory may therefore underestimate CH 4 emissions from forested organic soils surrounding open peatlands, although more precise methods and data are needed to verify this. Given the potential impact on net GHG emissions, CH 4 emissions from transitional forests on organic soils should be further investigated. Furthermore, the results demonstrate the potential of combining atmospheric inversion modelling of GHGs with diverse data sources and highlight the need for methods to more easily combine atmospheric inversions with national GHG inventories.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

How demand for and trade of construction materials affects greenhouse gas emissions

Construction materials generate nearly one-third of global carbon emissions, yet conventional accounting captures only a fraction of this impact. Using EXIOBASE data spanning 25 years, we tracked emissions across construction supply chains for cement, steel, metals, and plastics. While global construction demand nearly tripled, regional patterns diverged significantly. The EU reduced emissions despite increased demand through renewable energy adoption and emissions trading, while China's construction boom—driving most global growth—significantly increased domestic emissions. Manufacturing contributes most to embodied emissions compared to resource extraction and waste treatment. Increased reliance on offshore production undermines domestic emission control strategies, highlighting the need for expanded carbon border adjustment mechanisms. Without policies addressing full supply chain emissions, even aggressive climate initiatives will be compromised by carbon leakage, creating an emissions trajectory incompatible with global climate targets.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Experimental Soil Warming and Permafrost Thaw Increase CH 4 Emissions in an Upland Tundra Ecosystem

Rapid Arctic warming is causing permafrost to thaw and exposing large quantities of soil organic carbon (C) to potential decomposition. In dry upland tundra systems, subsidence from thawing permafrost can increase surface soil moisture resulting in higher methane (CH 4 ) emissions from newly waterlogged soils. The proportion of C released as carbon dioxide (CO 2 ) and CH 4 remains uncertain as previously dry landscapes transition to a thawed state, resulting in both wetter and drier microsites. To address how thaw and moisture interact to affect total C emissions, here we measured CH 4 and CO 2 emissions from paired chambers across thaw and moisture gradients created by nine years of experimental soil warming in interior Alaska. Cumulative growing season (May–September) CH 4 emissions were elevated at both wetter (216.1–1,099.4 mg CH 4 -C m –2 ) and drier (129.7–392.3 mg CH 4 -C m –2 ) deeply thawed microsites relative to shallow thaw (55.6–215.7 mg CH 4 -C m –2 ) and increased with higher deep soil temperatures and permafrost thaw depth. Interannual variability in CH4 emissions was driven by wet conditions in graminoid-dominated plots that generated >70% of emissions in a wet year. Shoulder season emissions were equivalent to growing season CH 4 emissions rates in the deeply thawed, warmed soils, highlighting the importance of non-growing season CH 4 emissions. Net C sink potential was reduced in deeply thawed wet plots by 4%–42%, and by 3.5%–8% in deeply thawed drier plots due to anaerobic respiration, suggesting that some dry upland tundra landscapes may transition into stronger CH 4 sources in a warming Arctic.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Projection of Future Fire Emissions Over the Contiguous US Using Explainable Artificial Intelligence and CMIP6 Models

Abstract Increasing temperature and water cycle changes due to warming climate may increase the frequency and intensity of wildfires. Fire emission projections are useful for informing strategies for adaptation and mitigation of fire impacts on societies and ecosystems. Here, we construct a neural network (NN) model explained by the Shapley Additive explanation to predict fire PM 2.5 emissions change and understand their drivers over the contiguous US (CONUS) in the mid‐21st century under a high greenhouse gas emissions scenario (SSP5‐8.5). Using future meteorology and leaf area index (LAI) simulated by eight global climate models from the Coupled Model Intercomparison Project Phase 6, future population density, and present‐day land use and land cover (LULC) as input to the NN model, the total fire PM 2.5 emissions over CONUS are projected to increase by 4%–75% (model spread). Among different regions, fire emissions in the western US are projected to increase more significantly in June‐July‐August than in other seasons and regions, with the median ratios of future to present‐day fire emissions ranging from 1.67 to 2.86. The increases in fire emissions are mainly driven by increasing normalized temperature (23%–29%) and decreasing soil moisture (2%–10%) in the future. When future LULC change is considered, the projected fire emissions further increase by 58%–83% over the western US compared to projections without LULC change because of future increases in vegetation fraction. The results highlight the important role of warmer temperature, decreasing soil moisture, and LULC change in increasing fire emissions in the future.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Hunting for gamma-ray emission from fast radio bursts

Context. Fast radio bursts (FRBs) are a recently discovered class of GHz-band, ms-duration, Jansky-level-flux astrophysical transients. Although hundreds of models have been proposed so far for FRB progenitors (the most popular ones involve magnetars), their physical origin and emission mechanism are still a mystery, making them one of the most compelling problems in astrophysics. Aims. FRBs are caused by astrophysical processes that are not yet understood. Exploring their high-energy counterpart is crucial for constraining their origin and emission mechanism. Methods. Thanks to more than 13 years of gamma-ray data collected by the Large Area Telescope on board the Fermi Gamma-ray Space Telescope, and to more than 1000 FRB events (from 561 non-repeating and 22 repeating sources), one of the largest samples created thus far, we performed the largest and deepest search for high-energy emission from FRB sources to date (between 100 MeV and 1 TeV). In addition to the analysis involving individual FRB events on different timescales (from a few seconds up to several years), we performed, for the first time, a stacking analysis on the full sample of FRB events as well as a search for triplet photons in coincidence with the radio event. Results. We do not detect significant emission, reporting the most stringent constraints, on short timescales, for the FRB-like emission from SGR 1935+2154 with E γ <10 41 erg, corresponding to a factor η < 10 7 with respect to the emitted radio energy. Similarly, for the stacked signal of steady emission from all repeaters, the obtained upper limit (UL) on the FRBs luminosity (L γ < 1.6 × 10 43 erg s -1 is more than two orders of magnitude lower than those derived from the individual sources. Finally, no individual or triplet photons have been significantly associated with FRB events. We derived the LAT ms-sensitivity to be ~0.3 ph cm -2 s -1 and constrained the gamma-ray energy E γ,δT = 1 ms ≲ 10 47 (D L /150 Mpc) 2 erg, ruling out a gamma-ray-to-radio energy ratio greater than 10 9 on ms timescales. Conclusions. The results reported here represent the most stringent UL reported so far on the high-energy emission from FRBs on short and long time scales, as well as on cumulative emission and individual photon searches. While the origin of FRBs is still unclear, our work provides important constraints for FRB modelling, which might shed light on their emission mechanism.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Tomographic optical emission spectroscopy of an atmospheric pressure plasma jet and surface ionization waves on planar and structured surfaces

Here in this paper, an approach for 3D plasma structure diagnostics using tomographic optical emission spectroscopy (Tomo-OES) of a nanosecond pulsed atmospheric pressure plasma jet (APPJ) is presented. In contrast to the well-known Abel inversion, Tomo-OES does not require cylindrical symmetry to recover 3D distributions of plasma light emission. Instead, many 2D angular projections are measured with intensified cameras and the multiplicative algebraic reconstruction technique is used to recover the 3D distribution of light emission. This approach solves the line-of-sight integration problem inherent to optical diagnostics, allowing recovery of localized OES information within the plasma that can be used to better infer plasma parameters within complex plasma structures. Here, Tomo-OES was applied to investigate an APPJ operated with helium in ambient air and impinging on planar and structured dielectric surfaces. Surface charging caused the guided streamer from the APPJ to transition to a surface ionization wave (SIW) that propagated along the surface. The SIW experienced variable geometrical and electrical material properties as it propagated, leading to 3D configurations that were non-symmetric and spatially complex. Light emission from He, N$_2^+$, and N2 were imaged at ten angular projections and the respective time-resolved 3D emission distributions in the plasma were then reconstructed. The spatial resolution of each tomographic reconstruction was 7.4 µm and the temporal resolution was 5 ns, sufficient to observe the guided streamer and the effects of the structured surface on the SIW. Emission from He showed the core of the jet and emission from N$_2^+$ and N2 indicated effects of entrainment of ambient air. Penning ionization of N2 created a ring or outer layer of N$_2^+$ that spatially converged to form the 'plasma bullet' or spatially diverged across a surface as part of a SIW. The SIW entered trenches of size 150 µm, leading to decreases in plasma light emission in regions above the trenches. The plasma light emission was higher in some regions with trenches, possibly due to effects of field enhancement.

plasma interactions with complex surfaces↗