Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron correlation calculations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Mass flow meter using the triboelectric effect for measurement in cryogenics

The use of triboelectric charge to measure the mass flow rate of cryogens for the Space Shuttle Main Engine was investigated. Cross correlation of the triboelectric charge signals was used to determine the transit time of the cryogen between two sensor locations in a .75-in tube. The ring electrode sensors were mounted in a removable spool piece. Three spool pieces were constructed for delivery, each with a different design. One set of electronics for implementation of the cross correlation and flow calculation was constructed for delivery. Tests were made using a laboratory flow loop using liquid freon and transformer oil. The measured flow precision was 1 percent and the response was linear. The natural frequency distribution of the triboelectric signal was approximately 1/f. The sensor electrodes should have an axial length less than approximately one/tenth pipe diameter. The electrode spacing should be less than approximately one pipe diameter. Tests using liquid nitrogen demonstrated poor tribo-signal to noise ratio. Most of the noise was microphonic and common to both electrode systems. The common noise rejection facility of the correlator was successful in compensating for this noise but the signal was too small to enable reliable demonstration of the technique in liquid nitrogen.

Bernatowicz, Henry↗
DOE OSTI2022

Thermoelectricity and electronic correlation enhancement in FeS by light Se doping

We report thermoelectric studies of FeS 1–x Se x (x = 0, 0.06) superconducting single crystals that feature high irreversibility fields and critical current density J c comparable to materials with much higher superconducting critical temperatures (T c 's). The ratio of T c to the Fermi temperature T F is very small, indicating weak electronic correlations. With a slight selenium substitution on sulfur site in FeS both T c /T F and the effective mass m* rise considerably, implying increase in electronic correlation of the bulk conducting states. The first-principle calculations show rise of the density of states at the Fermi level in FeS 0.94 Se 0.06 when compared to FeS, which is related not only to Fe but also to chalcogen-derived electronic states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Shear strength measurements and hydrostatic compression of rhenium diboride under high pressures

Shear strength measurements have been carried out on rhenium diboride, ReB 2 , to a pressure of 74 GPa using a Radial X-ray Diffraction (R-XRD) technique in a diamond anvil cell using platinum as an internal x-ray pressure standard. The R-XRD result has provided a unique insight into the deformation of hexagonal crystal lattice under non-hydrostatic compression and variation of shear strength with increasing pressure. From R-XRD data, we have estimated hydrostatic component of compression to determine an equation of state of rhenium diboride yielding a bulk modulus of K 0 = 366 ± 25 GPa with a pressure derivative $K^{'}_{0}$ = 4.3 ± 0.5 in good agreement with hydrostatic density functional theory calculations. Here, the average lower bound of shear strength (τ) from various diffraction planes was then calculated using the measured interplanar d-spacing (d m ) and hydrostatic component of d-spacing (d p ) to be shown to approach 6.7 ± 0.4 GPa at 70 GPa. Our results show that the anisotropic compression effects observed in ReB 2 under hydrostatic compression are correlated to electronic structure changes under compression as predicted by theoretical calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The role of electron correlations in the electronic structure of putative Chern magnet TbMn6Sn6

Abstract A member of the RMn 6 Sn 6 rare-earth family materials, TbMn 6 Sn 6 , recently showed experimental signatures of the realization of a quantum-limit Chern magnet. In this work, we use quantum Monte Carlo (QMC) and density functional theory with Hubbard U (DFT + U ) calculations to examine the electronic structure of TbMn 6 Sn 6 . To do so, we optimize accurate, correlation-consistent pseudopotentials for Tb and Sn using coupled-cluster and configuration–interaction (CI) methods. We find that DFT + U and single-reference QMC calculations suffer from the same overestimation of the magnetic moments as meta-GGA and hybrid density functional approximations. Our findings point to the need for improved orbitals/wavefunctions for this class of materials, such as natural orbitals from CI, or for the inclusion of multi-reference effects that capture the static correlations for an accurate prediction of magnetic properties. DFT + U with Mn magnetic moments adjusted to the experiment predict the Dirac crossing in bulk to be close to the Fermi level, within ~120 meV, in agreement with the experiments. Our non-stoichiometric slab calculations show that the Dirac crossing approaches even closer to the Fermi level, suggesting the possible realization of Chern magnetism in this limit.

36 MATERIALS SCIENCE↗
NASA NTRS1985

Oscillator strengths of some Ba lines - A treatment including core-valence correlation and relativistic effects

Theoretical calculations of selected excitation energies and oscillator strengths for Ba are presented that overcome the difficulties of previous theoretical treatments. A relativistic effective-core potential treatment is used to account for the relativistic core contraction, but the outermost ten electrons are treated explicitly. Core-valence correlation can be included in this procedure in a rigorous and systematic way through a configuration-interaction calculation. Insight is gained into the importance of relativistic effects by repeating many of the calculations using an all-electron nonrelativistic treatment employing an extended Slater basis set. It is found that the intensity of the intercombination line 3P1-1S0 is accurately determined by accounting for the deviation from LS coupling through spin-orbit mixing with the 1P1 state, and that deviations from the Lande interval rule provide an accurate measure of the degree of mixing.

Bauschlicher, C. W., Jr.↗
DOE OSTI2023

Loop-current charge density wave driven by long-range Coulomb repulsion on the kagomé lattice

Recent experiments on vanadium-based nonmagnetic kagomé metals A⁢V 3 ⁢Sb 5 ⁢(A=K,Rb,Cs) revealed evidence for possible spontaneous time-reversal symmetry (TRS) breaking in the charge density wave (CDW) ordered state. The long-sought-after quantum order of loop currents has been suggested as a candidate for the TRS breaking state. However, a microscopic model for the emergence of the loop-current CDW due to electronic correlations is still lacking. Here, in this work, we calculate the susceptibility of the real and imaginary bond orders on the kagomé lattice near van Hove filling, and reveal the importance of next-nearest-neighbor Coulomb repulsion V 2 in triggering the instability toward imaginary bond ordered CDW. The concrete effective single-orbital t–V 1 –V 2 model on the kagomé lattice is then studied, where t and V 1 are the hopping and Coulomb repulsion on the nearest-neighbor bonds. We obtain the mean-field ground states, analyze their properties, and determine the phase diagram in the plane spanned by V 1 and V 2 at van Hove filling. The region dominated by V 1 is occupied by a 2⁢a 0 ×2⁢a 0 real CDW insulator with the inverse of Star-of-David (ISD) bond configuration. Increasing V 2 indeed drives a first-order transition from ISD to stabilized loop-current insulators that exhibit four possible current patterns of different topological properties, leading to orbital Chern insulators. We then extend these results away from van Hove filling and show that electron doping helps the stabilization of loop currents, and gives rise to doped orbital Chern insulators with emergent Chern Fermi pockets carrying large Berry curvature and orbital magnetic moment. Our findings provide a concrete model realization of the loop-current Chern metal at the mean-field level for the TRS breaking normal state of the kagomé superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

A Gauss-Radau-Laguerre Discrete Variable Representation for Use in Continuum Electron Dynamics

In this work, we detail an implementation, suitable for calculations on highly correlated ionizing systems, of a modified finite element discrete variable representation (FE-DVR) appended with a Gauss-Radau-Laguerre element. The appended element includes exterior complex scaling (ECS) to impose outgoing wave boundary conditions on treatments of processes involving continuum electrons. In this “infinite range” ECS (irECS), the complications that introduce reflections from the end of the grid when the last ECS finite element has finite range are avoided by the use of the Laguerre-weighted exponentially decaying tails, while outgoing wave boundary conditions are still imposed via the ECS transformation. For highly correlated systems in the absence of strong external fields we find that accurate two-electron integrals are essential in this modified FE-DVR. To accurately compute the two-electron integrals over the entire ECS contour, we present a detailed examination of the implications from the boundary terms that arise in a solution of Poisson’s equation with the Radau-Laguerre basis. A boundary term correction is necessary, and when included, the Radau-Laguerre DVR can accurately describe highly correlated states such as the doubly excited states of helium over the entire ECS contour.

elements↗
DOE OSTI2021

Ab initio molecular dynamics on quantum computers

Ab initio molecular dynamics (AIMD) is a valuable technique for studying molecules and materials at finite temperatures where the nuclei evolve on potential energy surfaces obtained from accurate electronic structure calculations. In this work, we present an approach to running AIMD simulations on noisy intermediate-scale quantum (NISQ)-era quantum computers. The electronic energies are calculated on a quantum computer using the variational quantum eigensolver (VQE) method. Algorithms for computation of analytical gradients entirely on a quantum computer require quantum fault-tolerant hardware, which is beyond NISQ-era. Therefore, we compute the energy gradients numerically using finite differences, the Hellmann-Feynman theorem, and a correlated sampling technique. This method only requires additional classical calculations of electron integrals for each degree of freedom without any additional computations on a quantum computer beyond the initial VQE run. As a proof of concept, AIMD simulations are demonstrated for the H-2 molecule on IBM quantum devices. In addition, we demonstrate the validity of the method for larger molecules using full configuration interaction wave functions. As quantum hardware and noise mitigation techniques continue to improve, the method can be utilized for studying larger molecular systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1995

The FEM-R-Matrix Approach: Use of Mixed Finite Element and Gaussian Basis Sets for Electron Molecule Collisions

For the calculation of electron molecule collision cross sections R-matrix methods automatically take advantage of the division of configuration space into an inner region (I) bounded by radius tau b, where the scattered electron is within the molecular charge cloud and the system is described by an correlated Configuration Interaction (CI) treatment in close analogy to bound state calculations, and an outer region (II) where the scattered electron moves in the long-range multipole potential of the target and efficient analytic methods can be used for solving the asymptotic Schroedinger equation plus boundary conditions.

Thuemmel, Helmar T.↗
DOE OSTI2025

Recent advancements in atomic many-body methods for high-precision studies of isotope shifts

The development of atomic many-body methods, capable of incorporating electron correlation effects accurately, is required for isotope shift (IS) studies. In combination with precise measurements, such calculations help to extract nuclear charge radii differences, and to probe for signatures of physics beyond the Standard Model of particle physics. Here, we review here a few recently-developed methods in the relativistic many-body perturbation theory (RMBPT) and relativistic coupled-cluster (RCC) theory frameworks for calculations of IS factors in the highly charged ions (HCIs), and neutral or singly-charged ions, respectively. The results are presented for a wide range of atomic systems in order to demonstrate the interplay between quantum electrodynamics (QED) and electron correlation effects. In view of this, we start our discussions with the RMBPT calculations for a few HCIs by rigorously treating QED effects; then we outline methods to calculate IS factors in the one-valence atomic systems using two formulations of the RCC approach. Then we present calculations for two valence atomic systems, by employing the Fock-space RCC methods. For completeness, we briefly discuss theoretical input required for the upcoming experiments, their possibilities to probe nuclear properties and implications to fundamental physics studies.

QED effects↗
NASA NTRS1981

The self-consistent calculation of pseudo-molecule energy levels, construction of energy level correlation diagrams and an automated computation system for SCF-X(Alpha)-SW calculations

The self consistent calculation of the electronic energy levels of noble gas pseudomolecules formed when a metal surface is bombarded by noble gas ions is discussed along with the construction of energy level correlation diagrams as a function of interatomic spacing. The self consistent field x alpha scattered wave (SCF-Xalpha-SW) method is utilized. Preliminary results on the Ne-Mg system are given. An interactive x alpha programming system, implemented on the LeRC IBM 370 computer, is described in detail. This automated system makes use of special PROCDEFS (procedure definitions) to minimize the data to be entered manually at a remote terminal. Listings of the special PROCDEFS and of typical input data are given.

Schlosser, H.↗
DOE OSTI2025

Observation of multiple flat bands and Van Hove singularities in the distorted kagome metal NdTi 3 Bi 4

Kagome materials have attracted enormous research interest recently owing to their diverse topological phases and manifestation of electronic correlation. Here, in this study, we present the electronic structure of a distorted ferromagnetic kagome metal, NdTi 3 ⁢Bi 4 , exhibiting a transition temperature of 9 K. Our investigation employs a combination of angle-resolved photoemission spectroscopy (ARPES) measurements and density functional theory (DFT) calculations. We discover the presence of two “flat” bands which are found to originate from the kagome structure formed by Ti atoms with a major contribution from Ti 𝑑 𝑥⁢𝑦 and Ti 𝑑 𝑥 2 −𝑦 2 orbitals. We also observed multiple Van Hove singularities (VHSs) in its electronic structure, with one VHS lying near the Fermi level. The ARPES data reveal the existence of Dirac cone at the $\overline{𝐾}$ point, a finding which is corroborated by our DFT calculations. These findings present a detailed electronic structure capable of hosting correlation-driven phenomenon in this novel ferromagnetic kagome metal.

Fermi surface↗
DOE OSTI2023

Dependence of predicted bulk properties of hexagonal hydroxyapatite on exchange-correlation functional

Hydroxyapatite (HA) is the main component of human bones and teeth. HA has also been widely applied in various technological fields due to its unique properties. Reliable computational simulations for this critical material often require input parameters obtained from the first-principles density functional theory (DFT) calculations with appropriate exchange–correlation functionals. Previous DFT calculations are insufficient to verify the reliabilities of various functionals, particularly as they fail to assess predictions for multiple properties of the material. In this paper, we first select 18 different functionals to calculate geometric, elastic, electronic, and thermodynamic properties of hexagonal HA bulk crystal. We find that the results from optB86b-vdW and optB88-vdW functionals with dispersion corrections have the overall best agreement with available experimental data. Then, we choose optB88-vdW functional, as well as PBE functional without dispersion corrections as a comparison, to perform extensive first-principles DFT phonon calculations under the quasiharmonic approximation. Various thermodynamic properties (including phonon contributions to internal energy, entropy, and Helmholtz free energy) and thermal parameters (including thermal expansions of volume, thermal expansion coefficients, heat capacities, isothermal bulk moduli, etc.) versus temperature are consequently obtained. By comparing these quantities, we report that the results from optB88-vdW functional have significantly better agreement with available experimental data than those from PBE functional although the latter has been widely used in previous DFT calculations for HA-based material systems.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The Effect of Geometry, Spin, and Orbital Optimization in Achieving Accurate, Correlated Results for Iron–Sulfur Cubanes

Iron–sulfur clusters comprise an important functional motif in the catalytic centers of biological systems, capable of enabling important chemical transformations at ambient conditions. This remarkable capability derives from a notoriously complex electronic structure that is characterized by a high density of states that is sensitive to geometric changes. The spectral sensitivity to subtle geometric changes has received little attention from correlated, large active space calculations, owing partly to the exceptional computational complexity for treating these large and correlated systems accurately. Here, to provide insight into this aspect, we report the first Complete Active Space Self Consistent Field (CASSCF) calculations for different geometries of the [Fe(II/III) 4 S 4 (SMe) 4 ] -2 clusters using two complementary, correlated solvers: spin-pure Adaptive Sampling Configuration Interaction (ASCI) and Density Matrix Renormalization Group (DMRG). We find that the previously established picture of a double-exchange driven magnetic structure, with minute energy gaps (<1 mHa) between consecutive spin states, has a weak dependence on the underlying geometry. However, the spin gap between the singlet and the spin state 2S + 1 = 19, corresponding to a maximal number of Fe-d electrons being unpaired and of parallel spin, is strongly geometry dependent, changing by a factor of 3 upon slight deformations that are still within biologically relevant parameters. The CASSCF orbital optimization procedure, using active spaces as large as 86 electrons in 52 orbitals, was found to reduce this gap compared to typical mean-field orbital approaches. Our results show the need for performing large active space calculations to unveil the challenging electronic structure of these complex catalytic centers and should serve as accurate starting points for fully correlated treatments upon inclusion of dynamical correlation outside the active space.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Robust Kagome Electronic Structure in Topological Quantum Magnets XMn 6 Sn 6 (X = Dy, Tb, Gd, Y)

Crystal geometry can greatly influence the emergent properties of quantum materials. As an example, the kagome lattice is an ideal platform to study the rich interplay between topology, magnetism, and electronic correlation. In this work, combining high-resolution angle-resolved photoemission spectroscopy and ab initio calculation, we systematically investigate the electronic structure of XMn 6 Sn 6 (X=Dy,Tb,Gd,Y) family compounds. Here, we observe the Dirac fermion and the flat band arising from the magnetic kagome lattice of Mn atoms. Interestingly, the flat band locates in the same energy region in all compounds studied, regardless of their different magnetic ground states and 4f electronic configurations. These observations suggest a robust Mn magnetic kagome lattice across the XMn 6 Sn 6 family, thus providing an ideal platform for the search for, and investigation of, new emergent phenomena in magnetic topological materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Magic-angle twisted symmetric trilayer graphene as a topological heavy-fermion problem

Recently, Song and Bernevig [Phys. Rev. Lett. 129, 047601 (2022)] reformulated magic-angle twisted bilayer graphene as a topological heavy fermion problem, and used this reformulation to provide a deeper understanding for the correlated phases at integer fillings. Here, in this work, we generalize this heavy-fermion paradigm to magic-angle twisted symmetric trilayer graphene, and propose a low-energy f–c–d model that reformulates magic-angle twisted symmetric trilayer graphene as heavy localized f modes coupled to itinerant topological semimetalic c modes and itinerant Dirac d modes. Our f–c–d model well reproduces the single-particle band structure of magic-angle twisted symmetric trilayer graphene at low energies for displacement field $\mathcal{E}$ ϵ [0,300]⁢ meV. By performing Hartree-Fock calculations with the f–c–d model for v = 0,–1,–2 electrons per Moiré unit cell, we reproduce all the correlated ground states obtained from the previous numerical Hartree-Fock calculations with the Bistritzer-MacDonald-type model, and we find additional new correlated ground states at high displacement field. Based on the numerical results, we propose a simple rule for the ground states at high displacement fields by using the f–c–d model, and provide analytical derivation for the rule at charge neutrality. We also provide analytical symmetry arguments for the (nearly) degenerate energies of the high-$\mathcal{E}$ ground states at all the integer fillings of interest, and make experimental predictions of which charge-neutral states are stabilized in magnetic fields. Our f–c–d model provides a new perspective for understanding the correlated phenomena in magic-angle twisted symmetric trilayer graphene, suggesting that the heavy fermion paradigm of Song and Bernevig [Phys. Rev. Lett. 129, 047601 (2022)] should be the generic underpinning of correlated physics in multilayer moire graphene structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Dynamic and relativistic effects on Pt–Pt indirect spin–spin coupling in aqueous solution studied by ab initio molecular dynamics and two- vs four-component density functional NMR calculations

Treating 195Pt nuclear magnetic resonance parameters in solution remains a considerable challenge from a quantum chemistry point of view, requiring a high level of theory that simultaneously takes into account the relativistic effects, the dynamic treatment of the solvent–solute system, and the dynamic electron correlation. A combination of Car-Parrinello molecular dynamics (CPMD) and relativistic calculations based on two-component zeroth order regular approximation spin–orbit Kohn–Sham (2c-ZKS) and four-component Dirac–Kohn–Sham (4c-DKS) Hamiltonians is performed to address the solvent effect (water) on the conformational changes and JPtPt1 coupling. A series of bridged PtIII dinuclear complexes [L1–Pt2(NH3)4(Am)2–L2]n+ (Am = α–pyrrolidonate and pivalamidate; L = H2O, Cl−, and Br−) are studied. The computed Pt–Pt coupling is strongly dependent on the conformational dynamics of the complexes, which, in turn, is correlated with the trans influence among axial ligands and with the angle N–C–O from the bridging ligands. The J-coupling is decomposed in terms of dynamic contributions. The decomposition reveals that the vibrational and explicit solvation contributions reduce JPtPt1 of diaquo complexes (L1 = L2 = H2O) in comparison to the static gas-phase magnitude, whereas the implicit solvation and bulk contributions correspond to an increase in JPtPt1 in dihalo (L1 = L2 = X−) and aquahalo (L1 = H2O; L2 = X−) complexes. Relativistic treatment combined with CPMD shows that the 2c-ZKS Hamiltonian performs as well as 4c-DKS for the JPtPt1 coupling.

Chemistry↗
NASA NTRS1977

Diagrammatic perturbation theory - N2 X1 Sigma/plus/g

The diagrammatic many-body perturbation theory is used to calculate the correlation energy of the nitrogen molecule in its electronic ground state. Using the algebraic approximation, the energy is evaluated through third order, including all many-body effects. (2/1) Pade approximants and variational upper bounds are constructed. For one of the perturbation expansions considered, the (2/1) Pade approximant leads to the recovery of 79.5 percent of the empirical correlation energy, while the variational upper bound recovers 72.0 percent. Three-body effects are examined in some detail. The relationships with previous work on N2 are discussed.

Wilson, S.↗