Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electroactive Polymers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Humanoids and the Potential Role of Electroactive Materials/Mechanisms in Advancing Their Capability

Humanoids are increasingly becoming capable biologically inspired robots that are appearing and behaving lifelike. Making humanlike robots is the ultimate challenge to biomimetics and, while for many years they were considered a science fiction, such robots are increasingly becoming engineering reality. Progress in producing such robots are allowing them to perform impressive functions and tasks. In 2012, in an effort to promote significant advances in developing humanoids, DARPA posed a Robotic Challenge to produce such robots that operate in disaster scenarios towards making society more resilient. The challenge was focused on the requirements that have been needed after the Fukushima accident in Japan, hoping to advance the field of disaster robotics. This disaster posed significant challenges to emergency responders since radiation prevented people from going into the station and venting the explosive gas. Another significant development in this field is the fact that major US corporations have entered into the race to produce commercial humanoids. As a result, one can expect significant and rapid progress in this field. Developing humanoids is critically dependent of the use of highly efficient, compact, lightweight actuators and electroactive materials are offering great potential. This paper reviews the state-of-theart of humanlike robots, potential applications and challenges, as well as the actuation materials that are used or could be used.

Electroactive Polymer Actuators↗

Photoelectrochemical electrodes

The surface of a moderate band gap semiconductor such as p-type molybdenum sulfide is modified to contain an adherent film of charge mediating ionene polymer containing an electroactive unit such as bipyridimium. Electron transport between the electrode and the mediator film is favorable and photocorrosion and recombination processes are suppressed. Incorporation of particles of catalyst such as platinum within the film provides a reduction in overvoltage. The polymer film is readily deposited on the electrode surface and can be rendered stable by ionic or addition crosslinking. Catalyst can be predispersed in the polymer film or a salt can be impregnated into the film and reduced therein.

Williams, R. M.↗

Sensing/actuating materials made from carbon nanotube polymer composites and methods for making same

An electroactive sensing or actuating material comprises a composite made from a polymer with polarizable moieties and an effective amount of carbon nanotubes incorporated in the polymer for a predetermined electromechanical operation of the composite when such composite is affected by an external stimulus. In another embodiment, the composite comprises a third component of micro-sized to nano-sized particles of an electroactive ceramic that is also incorporated in the polymer matrix. The method for making the three-phase composite comprises either incorporating the carbon nanotubes in the polymer matrix before incorporation of the particles of ceramic or mixing the carbon nanotubes and particles of ceramic together in a solution before incorporation in the polymer matrix.

Ounaies, Zoubeida↗

Method of making organic light emitting devices

The present invention provides a method for the preparation of organic light-emitting devices comprising a bilayer structure made by forming a first film layer comprising an electroactive material and an INP precursor material, and exposing the first film layer to a radiation source under an inert atmosphere to generate an interpenetrating network polymer composition comprising the electroactive material. At least one additional layer is disposed on the reacted first film layer to complete the bilayer structure. The bilayer structure is comprised within an organic light-emitting device comprising standard features such as electrodes and optionally one or more additional layers serving as a bipolar emission layer, a hole injection layer, an electron injection layer, an electron transport layer, a hole transport layer, exciton-hole transporting layer, exciton-electron transporting layer, a hole transporting emission layer, or an electron transporting emission layer.

47 OTHER INSTRUMENTATION↗

Minimizing analyte electrolysis in electrospray ionization mass spectrometry using a redox buffer coated emitter electrode

An emitter electrode with an electroactive poly(pyrrole) (PPy) polymer film coating was constructed for use in electrospray ionization mass spectrometry (ESI-MS). The PPy film acted as a surface-attached redox buffer limiting the interfacial potential of the emitter electrode. While extensive oxidation of selected analytes (reserpine and amodiaquine) was observed in positive ion mode ESI using a bare metal (gold) emitter electrode, the oxidation was suppressed for these same analytes when using the PPy-coated electrode. A semi-quantitative relationship between the rate of oxidation observed and the interfacial potential of the emitter electrode was shown. The redox buffer capacity, and therefore the lifetime of the redox buffering effect, correlated with the oxidation potential of the analyte and with the magnitude of the film charge capacity. Online reduction of the PPy polymer layer using negative ion mode ESI between analyte injections was shown to successfully restore the redox buffering capacity of the polymer film to its initial state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of organic electroactive crystallites in a dielectric matrix on the electrical properties of a polymer dielectric

In this work, the effects of inserting chargeable α-quaterthiophene (α4T) crystallites in polystyrene (PS) multilayers used as a transistor gate and capacitor dielectric were investigated. X-ray diffraction (XRD), scanning electron microscopy with energy dispersive x-ray spectroscopy (SEM/EDS), and confocal microscopy indicated the formation of α4T crystallites in the PS matrix. A modified saturation-regime current voltage relationship was used to estimate organic field-effect transistor (OFET) threshold voltage V TH shifting, and in turn the quantities of stored charge that were observed as a result of dielectric charging. The crystallites increased the maximum charge storage capacity as well as the charge retention capability of the dielectrics. Kelvin probe force microscopy (KPFM) showed that charges were localized near the α4T crystallites upon charging. Trilayer experiments validated the charge retention improvement of α4T crystallite-embedded PS dielectrics. The crystallites also improved breakdown characteristics in PS used as a capacitor dielectric, suggesting their application to storage capacitors in addition to OFET logic.

25 ENERGY STORAGE↗

Vibrational properties of ferroelectric {beta}-vinylidene fluoride polymers and oligomers.

We utilize a plane-wave density-functional theory approach to investigate the vibrational properties of the all-trans ferroelectric phase of poly(vinylidene fluoride) ({beta}-PVDF) showing that its stable state corresponds to the Ama2 structure with ordered dihedral tilting of the VDF monomers along the polymer chains. We then combine our theoretical analysis with IR spectroscopy to examine vibrations in oligomer crystals that are structurally related to the {beta}-PVDF phase. We demonstrate that these materials - which can be grown in a highly crystalline form - exhibit IR activity similar to that of {beta}-PVDF, making them an attractive choice for the studies of electroactive phenomena and phase transitions in polymer ferroelectrics.

36 MATERIALS SCIENCE↗

Ionic Liquid Conditioning ofPoly(vinylferrocene) for the Doping/Undoping of Glycylglycylglycine Tripeptide

Potentiodynamic electrochemical measurements of the redox-driven entry and exit of ionized glycylglycylglycine peptide (GGG-) during polymer oxidation and reduction, respectively, are presented and interpreted for electroactive poly(vinylferrocene) (PVF)-modified electrodes. Frequently, electrochemically controlled redox cycling results in the dramatic alteration in polymer film properties, typically accompanied by loss of redox activity, exemplified in this case by negligible currents associated with repeated exposure to GGG. Notably, we have discovered that preconditioning of PVF films with suitable ionic liquids (ILs) such as the N-alkyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imides allows the electroactive film to relax to a state compatible with reversible GGG- doping/undoping. Our studies substantiate that both the cation and the anion of the IL must be considered as both play important roles in appropriately conditioning the PVF polymer films. Indeed, ILs with structures and properties highly divergent from the target GGG- failed to properly condition PVF to a compatible state.

Tang, Yijum↗