Results for “Dynamic stiffness” — Page 11

DOE OSTI2024

Amplifying Nanoparticle Reinforcement through Low Volume Topologically Controlled Chemical Coupling

Here, we present a streamlined method to covalently bond hydroxylated carbon nanotubes (CNOH) within a polyphenol matrix, all achieved through a direct, solvent-free process. Employing an extremely small concentration of CNOH (0.01% w/w) along with topologically contrasting linkers led to a maximum of 5-fold increase in modulus and a 25% enhancement in tensile strength compared to the unaltered matrix, an order of magnitude greater reinforcement (w/w) compared to state-of-the-art melt-processed nanocomposites. Through dynamic mechanical analysis, low field solid-state nuclear magnetic resonance spectroscopy, and molecular dynamics simulations, we uncovered the profound influence of linker’s conformational degrees of freedom on the segmental dynamics and therefore the material’s properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1972

Fatigue of composites

The failure mechanisms in the fatigue of composite materials are analyzed in terms of the requirements for designing fatigue-critical composite structures. Fiber reinforced polymers, fiber reinforced metals, fatigue of composite structures, and composite design considerations are discussed. It is concluded that composite materials offer the engineer the opportunity for tailoring stiffness in different directions for designing dynamic components.

Salkind, M. J.↗

NASA NTRS1983

Evaluation of outer race tilt and lubrication on ball wear and SSME bearing life reductions

Several aspects of the SSME bearing operation were evaluated. The possibility of elastohydrodynamics (EHD) lubrication with a cryogenic fluid was analyzed. Films as thick as .61 microns were predicted with one theory which may be thick enough to provide hydrodynamic support. The film formation, however, is heavily dependent on good surface finish and a low bulk bearing temperature. Bearing dynamics to determine if the radial stiffness of a bearing which are dependent on bearing misalignment were analyzed. Four ball tests were conducted at several environmental conditions from an LN2 bath to 426 C in air. Surface coatings and ball materials are evaluated. Severe wear and high friction are measured for all ball materials except when the balls have surface lubricant coatings.

Kannel, J. W.↗

NASA NTRS1985

An Overview of Latest Model Reduction and Control Methods of Large Flexible Space Structures

The latest trends and theoretical developments involved with the modeling and control of Large Flexible Space Structures (LFSS) are described. The paper addresses first the basic problems, characteristics, and difficulties inherent in modeling and control of LFSS. Major sources of difficulties and errors are the stiffness and damping operators of the dynamic model. Extensions of Linear Quadratic Gaussian (LQG) theory as applied to LFSS are presented, including frequency-shaped cost functionals and perturbation methods. The minimum data/maximum entropy approach which uses a stochastic design model to overcome difficulties found in the LQG-based methods is described. Latest trends in system theory including balanced realization and singular-value analysis are used to determine reduced order controllers and models. Ad hoc methods such as component cost analysis and modal cost analysis are discussed in context with the closed-loop reduction problem of controller order versus performance. The minimum data/maximum entropy approach also addresses controller order versus performance. Those areas of control science and large scale systems that appear to have an important role in understanding and solving LFSS modeling and control are also identified.

Santiago, J. M.↗

NASA NTRS1990

Vibration transmission through rolling element bearings. I - Bearing stiffness formulation. II - System studies

How vibratory motion can be transmitted from the rotating shaft to the casing and other connecting structures in rotating mechanical equipment is addressed here by developing a new mathematical model of precision rolling element bearings. A new grating stiffness matrix is proposed in order to demonstrate a coupling between the shaft bending motion and the flexural motion of the casing plate. It is shown that the translational bearing stiffness coefficients currently used in rotor dynamic models are a small subset of the proposed matrix. The theory is validated by examples, and the proposed bearing formulation is then extended to demonstrate its superiority over existing models in vibration transmission analyses. It is shown that the model can easily be incorporated into analytical or numerical models typically used for dynamic analyses.

Lim, T. C.↗

NASA NTRS1992

An unsymmetric Lanczos algorithm for damped structural dynamics systems

A one-sided, unsymmetric block Lanczos algorithm is proposed for the model reduction of structural dynamics systems with unsymmetric damping and/or stiffness matrices. The algorithm is a three-term iteration scheme, which transforms the system matrix into an almost skew-symmetric, block-tridiagonal form. The Lanczos reduced-order model is guaranteed to be stable if the full-order system is stable. For unstable systems, a shifting method is available. Also, the algorithm offers flexibility in the choice of starting vectors and thus can yield more accurate reduced-order models. A linear system example and a plane truss structure example are used to show the efficacy of the proposed method.

Su, Tzu-Jeng↗

NASA NTRS1995

Merger of a Neutron Star with a Newtonian Black Hole

Newtonian smooth particle hydro simulations are presented of the merger of a 1.4 solar mass neutron star with a black hole of equal mass. The initial state of the system is modeled with a stiff polytrope orbiting a point mass. Dynamical instability sets in when the orbital separation is equal to about three stellar radii. The ensuing mass transfer occurs on the dynamical timescale. No accretion torus is formed. At the end of the computation a corona of large extent shrouds an apparently stable binary system of a 0.25 solar mass star orbiting a 2.3 solar mass black hole.

Lee, William H.↗

NASA NTRS2005

Users' Manual for Computer Code SPIRALI Incompressible, Turbulent Spiral Grooved Cylindrical and Face Seals

The SPIRALI code predicts the performance characteristics of incompressible cylindrical and face seals with or without the inclusion of spiral grooves. Performance characteristics include load capacity (for face seals), leakage flow, power requirements and dynamic characteristics in the form of stiffness, damping and apparent mass coefficients in 4 degrees of freedom for cylindrical seals and 3 degrees of freedom for face seals. These performance characteristics are computed as functions of seal and groove geometry, load or film thickness, running and disturbance speeds, fluid viscosity, and boundary pressures. A derivation of the equations governing the performance of turbulent, incompressible, spiral groove cylindrical and face seals along with a description of their solution is given. The computer codes are described, including an input description, sample cases, and comparisons with results of other codes.

Walowit, Jed A.↗

NASA NTRS2005

Source Listings for Computer Code SPIRALI Incompressible, Turbulent Spiral Grooved Cylindrical and Face Seals

This is the source listing of the computer code SPIRALI which predicts the performance characteristics of incompressible cylindrical and face seals with or without the inclusion of spiral grooves. Performance characteristics include load capacity (for face seals), leakage flow, power requirements and dynamic characteristics in the form of stiffness, damping and apparent mass coefficients in 4 degrees of freedom for cylindrical seals and 3 degrees of freedom for face seals. These performance characteristics are computed as functions of seal and groove geometry, load or film thickness, running and disturbance speeds, fluid viscosity, and boundary pressures.

Walowit, Jed A.↗

NASA NTRS2008

Identifying Bearing Rotordynamic Coefficients using an Extended Kalman Filter

An Extended Kalman Filter is developed to estimate the linearized direct and indirect stiffness and damping force coefficients for bearings in rotor-dynamic applications from noisy measurements of the shaft displacement in response to imbalance and impact excitation. The bearing properties are modeled as stochastic random variables using a Gauss-Markov model. Noise terms are introduced into the system model to account for all of the estimation error, including modeling errors and uncertainties and the propagation of measurement errors into the parameter estimates. The system model contains two user-defined parameters that can be tuned to improve the filter s performance; these parameters correspond to the covariance of the system and measurement noise variables. The filter is also strongly influenced by the initial values of the states and the error covariance matrix. The filter is demonstrated using numerically simulated data for a rotor-bearing system with two identical bearings, which reduces the number of unknown linear dynamic coefficients to eight. The filter estimates for the direct damping coefficients and all four stiffness coefficients correlated well with actual values, whereas the estimates for the cross-coupled damping coefficients were the least accurate.

Miller, Bard A.↗

NASA NTRS2008

Identifying Bearing Rotordynamic Coefficients using an Extended Kalman Filter

An Extended Kalman Filter is developed to estimate the linearized direct and indirect stiffness and damping force coefficients for bearings in rotor-dynamic applications from noisy measurements of the shaft displacement in response to imbalance and impact excitation. The bearing properties are modeled as stochastic random variables using a Gauss-Markov model. Noise terms are introduced into the system model to account for all of the estimation error, including modeling errors and uncertainties and the propagation of measurement errors into the parameter estimates. The system model contains two user-defined parameters that can be tuned to improve the filter s performance; these parameters correspond to the covariance of the system and measurement noise variables. The filter is also strongly influenced by the initial values of the states and the error covariance matrix. The filter is demonstrated using numerically simulated data for a rotor-bearing system with two identical bearings, which reduces the number of unknown linear dynamic coefficients to eight. The filter estimates for the direct damping coefficients and all four stiffness coefficients correlated well with actual values, whereas the estimates for the cross-coupled damping coefficients were the least accurate.

Miller, Brad A.↗

NASA NTRS1956

The Dynamic Response of a Large Airplane to Continuous Random Atmospheric Disturbances

The statistical approach to the gust-loads problem, which consists in considering flight th1ough turbulent air to be a stationary random process, is extended by including the effect of lateral variations of the instantaneous gust intensity on the aerodynamic forces and on the resultant motions and stresses of rigid and flexible airplanes. By means of some calculations of normal and rolling accelerations, as well as of the root bending moment, it is shown that these effects may be significant for large airplanes.

Aeroplane↗

NASA NTRS2018

Solution of Ordinary Differential Equations in Gradient-Based Multidisciplinary Design Optimization

A gradient-based approach to multidisciplinary design optimization enables efficient scalability to large numbers of design variables. However, the need for derivatives causes difficulties when integrating ordinary differential equations (ODEs) in models. To simplify this, we propose the use of the general linear methods framework, which unifies all Runge-Kutta and linear multistep methods. This approach enables rapid implementation of integration methods without the need to differentiate each one, even in a gradient-based optimization context. We also develop a new parallel time integration algorithm that enables vectorization across time steps. We present a set of benchmarking results using a stiff ODE, a non-stiff nonlinear ODE, and an orbital dynamics ODE, and compare integration methods. In a modular gradient-based multidisciplinary design optimization context, we find that the new parallel time integration algorithm with high-order implicit methods, especially Gauss-Legendre collocation, is the best choice for a broad range of problems.

Hwang, John T.↗

NASA NTRS1984

Dynamics of early planetary gear trains

A method to analyze the static and dynamic loads in a planetary gear train was developed. A variable-variable mesh stiffness (VVMS) model was used to simulate the external and internal spur gear mesh behavior, and an equivalent conventional gear train concept was adapted for the dynamic studies. The analysis can be applied either involute or noninvolute spur gearing. By utilizing the equivalent gear train concept, the developed method may be extended for use for all types of epicyclic gearing. The method is incorporated into a computer program so that the static and dynamic behavior of individual components can be examined. Items considered in the analysis are: (1) static and dynamic load sharing among the planets; (2) floating or fixed Sun gear; (3) actual tooth geometry, including errors and modifications; (4) positioning errors of the planet gears; (5) torque variations due to noninvolute gear action. A mathematical model comprised of power source, load, and planetary transmission is used to determine the instantaneous loads to which the components are subjected. It considers fluctuating output torque, elastic behavior in the system, and loss of contact between gear teeth. The dynamic model has nine degrees of freedom resulting in a set of simultaneous second order differential equations with time varying coefficients, which are solved numerically. The computer program was used to determine the effect of manufacturing errors, damping and component stiffness, and transmitted load on dynamic behavior. It is indicated that this methodology offers the designer/analyst a comprehensive tool with which planetary drives may be quickly and effectively evaluated.

August, R.↗

NASA NTRS1984

Numerical formulation for a higher order plane finite dynamic element

The paper describes the development of an eight-node plane rectangular finite dynamic element and presents detailed descriptions of the associated numerical formulation involving the higher order dynamic correction terms pertaining to the related stiffness and inertia matrices. Numerical test results of free vibration analyses are presented in detail for the newly developed eight-node element and also the corresponding four-node element in order to make a clear comparison of the relative efficiencies of the corresponding finite element and dynamic element procedures. Such results indicate a superior pattern of solution convergence of the presently developed dynamic element.

Gupta, K. K.↗

NASA NTRS1993

Dynamic analysis of spur gears using computer program DANST

DANST is a computer program for static and dynamic analysis of spur gear systems. The program can be used for parametric studies to predict the effect on dynamic load and tooth bending stress of spur gears due to operating speed, torque, stiffness, damping, inertia, and tooth profile. DANST performs geometric modeling and dynamic analysis for low- or high-contact-ratio spur gears. DANST can simulate gear systems with contact ratio ranging from one to three. It was designed to be easy to use, and it is extensively documented by comments in the source code. This report describes the installation and use of DANST. It covers input data requirements and presents examples. The report also compares DANST predictions for gear tooth loads and bending stress to experimental and finite element results.

Oswald, Fred B.↗

NASA NTRS1993

Dynamic analysis of spur gears using computer program DANST

DANST is a computer program for static and dynamic analysis of spur gear systems. The program can be used for parametric studies to predict the effect on dynamic load and tooth bending stress of spur gears due to operating speed, torque, stiffness, damping, inertia, and tooth profile. DANST performs geometric modeling and dynamic analysis for low- or high-contact-ratio spur gears. DANST can simulate gear systems with contact ratio ranging from one to three. It was designed to be easy to use, and it is extensively documented by comments in the source code. This report describes the installation and use of DANST. It covers input data requirements and presents examples. The report also compares DANST predictions for gear tooth loads and bending stress to experimental and finite element results.

Oswald, Fred B.↗

NASA NTRS1985

A Structural Dynamics Approach to the Simulation of Spacecraft Control/Structure Interaction

A relatively simple approach to the analysis of linear spacecraft control/structure interaction problems is presented. The approach uses a commercially available structural system dynamic analysis package for both controller and plant dynamics, thus obviating the need to transfer data between separate programs. The unilateral coupling between components in the control system block diagram is simulated using sparse matrix stiffness and damping elements available in the structural dynamic code. The approach is illustrated with a series of simple tutorial examples of a rigid spacecraft core with flexible appendages.

Young, J. W.↗