Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dynamic parameter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

High harmonic generation in Haldane model quantum dots

We study theoretically the nonlinear electron dynamics of Haldane model quantum dots placed in the field of an ultrashort optical pulse. One of the tuning parameters of the Haldane model is the phase accumulated by an electron during its transfer between the next nearest neighbor sites. We study how this parameter affect the nonlinear electron dynamics and the generation of high optical harmonics. With increasing the phase from its zero value to 90°, the low-energy electron states in the conduction and valence bands become more localized near the edges of the quantum dot resulting in suppression of the band gap, enhancement of the dipole inter-band coupling, and strong suppression of the average low-energy electron density of the states. As a result, the nonlinear response of the electron system of a Haldane model quantum dot is the strongest at intermediate values of the phase, ≈ 30− 40°. At these values of the phase, the electron dynamics is irreversible and a few first high-order harmonics have the largest intensities. Here, when the phase approaches 90° value the generation of high harmonics is strongly suppressed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Design of Experiments for Dynamic Test Runs in Solvent-Based CO 2 Capture Pilot Plants

Test runs in the pilot plants consume significant resources, and therefore, the learning from test runs should be maximized. Test runs conducted in the pilot plants are often steady state. It takes several hours for reaching steady-state in the pilot plants, and thus, the duration of the test runs needs to be long even for collecting few steady-state data points. On the other hand, a large number of measurements can be collected through dynamic test runs in a short span of time. This paper presents a systematic design of dynamic experiments (DoDEs) for identifiability of model parameters, which is achieved by persistently exciting the inputs signals. A pseudorandom binary sequence (PRBS) is designed as the input signal for DoDE due to its efficiency in obtaining sufficient spectral content. However, due to the long sequence size of the PRBS signal, a Schroeder-phase input signal, which is a multisine signal, is also designed. Tests for both types of signals are run in the Pilot Solvent Test Unit (PSTU) at the National Carbon Capture Center in Wilsonville, Alabama. The transient data are used to solve dynamic data reconciliation and parameter estimation problem. The estimated parameters are found to be not only superior to those estimated from using data collected from hundreds of steady-state test runs in a nonreactive (air–water) system, but the parameters could be estimated by using the dynamic data collected for about 24 h from the pilot plant for the MEA-H 2 O–CO 2 system.

CO2 capture↗
DOE OSTI2020

Microengineering Pressure Sensor Active Layers for Improved Performance

Abstract Pressure sensors play an integral role in a wide range of applications, such as soft robotics and health monitoring. In order to meet this demand, many groups microengineer the active layer—the layer that deforms under pressure and dictates changes in the output signal—of capacitive, resistive/piezoresistive, piezoelectric, and triboelectric pressure sensors in order to improve sensor performance. Geometric microengineering of the active layer has been shown to improve performance parameters such as sensitivity, dynamic range, limit of detection, and response and relaxation times. There are a wide range of implemented designs, including microdomes, micropyramids, lines or microridges, papillae, microspheres, micropores, and microcylinders, each offering different advantages for a particular application. It is important to compare the techniques by which the microengineered active layers are designed and fabricated as they may provide additional insights on compatibility and sensing range limits. To evaluate each fabrication method, it is critical to take into account the active layer uniformity, ease of fabrication, shape and size versatility and tunability, and scalability of both the device and the fabrication process. By better understanding how microengineering techniques and design compares, pressure sensors can be targetedly designed and implemented.

Ruth, Sara Rachel Arussy↗
DOE OSTI2020

Defect-Enhanced Polarization Switching in the Improper Ferroelectric LuFeO 3

Results of switching behavior of the improper ferroelectric LuFeO 3 are presented. Here, using a model set of films prepared under controlled chemical and growth-rate conditions, it is shown that defects can reduce the quasi-static switching voltage by up to 40% in qualitative agreement with first-principles calculations. Switching studies show that the coercive field has a stronger frequency dispersion for the improper ferroelectrics compared to a proper ferroelectric such as PbTiO 3 . It is concluded that the primary structural order parameter controls the switching dynamics of such improper ferroelectrics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The Crystalline Behavior and Device Function of Nonfullerene Acceptors in Organic Solar Cells

The current research investigates the structure features and intermolecular interactions of nonfullerene acceptors (NFAs) in single crystal and thin films, as well as their solar cell applications. Guiding parameters and key intermolecular forces that lead to 2D brickwork or 3D web packing are identified. The atomic modification is shown as the key to induce hydrogen bonding or π–π stacking column, which results in different crystalline packing. The molecular assembly in thin film is initiated by hydrogen bonding and completed by π–π stacking reorganization. The packing energy is seen as a guiding parameter that dictates the NFA crystalline morphology in blended thin films. The crystalline packing motif is not directly related with device efficiency. However, the crystalline morphology is the key parameter to influence exciton/carrier dynamics and device performance. In conclusion, a broader picture on the scaling behavior of organic semiconductor crystals ranging from oligoacenes to NFAs is established.

14 SOLAR ENERGY↗
DOE OSTI2022

Sharing is caring: An extensive analysis of parameter-based transfer learning for the prediction of building thermal dynamics

In recent years deep neural networks have been proposed as a lightweight data-driven model to capture high-dimensional, nonlinear physical processes to predict building thermal responses. However, the need of a large amount of data for the training process of deep neural networks clashes with the potential limited data availability in most existing or new buildings. Transfer learning aims to enhance the performance of a target learner exploiting knowledge from related and similar environments. This study conducted a suite of experiments that leveraged 250 data-driven models based on a synthetic dataset of a building archetype to study the influence of data availability, energy efficiency level, occupancy and climate for the transfer process of thermal dynamics. The performance of the transfer learning process was compared against a classical machine learning approach. Here, the results suggest that building thermal dynamics can be effectively transferred under the same climatic conditions, increasing performance when dealing with different occupancy schedules, efficiency levels and low data availability. Furthermore, the paper compares the performance of both transfer learning and machine learning approaches in an online fashion, to support the implementation in real-world deployment.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Cooperative control of a DNA origami force sensor

Abstract Biomolecular systems are dependent on a complex interplay of forces. Modern force spectroscopy techniques provide means of interrogating these forces, but they are not optimized for studies in constrained environments as they require attachment to micron-scale probes such as beads or cantilevers. Nanomechanical devices are a promising alternative, but this requires versatile designs that can be tuned to respond to a wide range of forces. We investigate the properties of a nanoscale force sensitive DNA origami device which is highly customizable in geometry, functionalization, and mechanical properties. The device, referred to as the NanoDyn, has a binary (open or closed) response to an applied force by undergoing a reversible structural transition. The transition force is tuned with minor alterations of 1 to 3 DNA oligonucleotides and spans tens of picoNewtons (pN). The DNA oligonucleotide design parameters also strongly influence the efficiency of resetting the initial state, with higher stability devices (≳10 pN) resetting more reliably during repeated force-loading cycles. Finally, we show the opening force is tunable in real time by adding a single DNA oligonucleotide. These results establish the potential of the NanoDyn as a versatile force sensor and provide fundamental insights into how design parameters modulate mechanical and dynamic properties.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

CMS Full Simulation for Run 3

We report the status of the CMS full simulation for Run 3. During the long shutdown of the LHC a significant update has been introduced to the CMS code for simulation. The CMS geometry description is reviewed. Several important modifications were needed. CMS detector description software is migrated to the DD4Hep community developed tool. We will report on our experience obtained during the process of this migration. Geant4 10.7 is the CMS choice for Run 3 simulation productions. We will discuss arguments for this choice, the strategy of adaptation of a new Geant4 version, and will report on the physics performance of the CMS simulation. A special Geant4 Physics List configuration FTFP_BERT_EMM will be described, which provides a compromise between simulation accuracy and CPU performance. A significant fraction of time for simulation of CMS events is spent on tracking of charged particles in a magnetic field. In the CMS simulation a dynamic choice of Geant4 parameters for tracking in field is implemented. A new method is introduced into simulation of electromagnetic components of hadronic showers in the electromagnetic calorimeter of CMS. For low-energy electrons and positrons a parametrization of GFlash type is applied. Results of tests of this method will be discussed. In summary, we expect about 25% speedup of the CMS simulation production for Run 3 compared to the Run 2 simulations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Time evolution of ML-MCTDH wavefunctions. II. Application of the projector splitting integrator

The multi-layer multi-configuration time-dependent Hartree (ML-MCTDH) approach can suffer from numerical instabilities whenever the wavefunction is weakly entangled. These instabilities arise from singularities in the equations of motion (EOMs) and necessitate the use of regularization of the EOMs. The Projector Splitting Integrator (PSI) has previously been presented as an approach for evolving ML-MCTDH wavefunctions that is free of singularities. Here, we will discuss the implementation of the multi-layer PSI with a particular focus on how the steps required relate to those required to implement standard ML-MCTDH. We demonstrate the efficiency and stability of the PSI for large ML-MCTDH wavefunctions containing up to hundreds of thousands of nodes by considering a series of spin-boson models with up to 106 bath modes and find that for these problems, the PSI requires roughly 3–4 orders of magnitude fewer Hamiltonian evaluations and 2–3 orders of magnitude fewer Hamiltonian applications than standard ML-MCTDH and 2–3/1–2 orders of magnitude fewer evaluations/applications than approaches that use improved regularization schemes. Finally, we consider a series of significantly more challenging multi-spin-boson models that require much larger numbers of single-particle functions with wavefunctions containing up to ~1.3×10 9 parameters to obtain accurate dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Inviscid damping of an elliptical vortex subject to an external strain flow

Inviscid spatial Landau damping is studied experimentally for the case of oscillatory motion of a two-dimensional vortex about its elliptical equilibrium in the presence of an applied strain flow. Here, the experiments are performed using electron plasmas in a Penning–Malmberg trap. They exploit the isomorphism between the two-dimensional Euler equations for an ideal fluid and the drift-Poisson equations for the plasma, where plasma density is the analog of vorticity. Perturbed elliptical vortex states are created using E x B strain flows, which are generated by applying voltages to electrodes surrounding the plasma. Measurements of spatial Landau damping (also called critical-layer damping) are in agreement with previous studies in the absence of an applied strain, where the damping is due to a resonance between the local fluid motion and the vortex oscillations. Interestingly, the damping rate does not change significantly over a wide range of applied strain rates. This can be accurately predicted from the initial vorticity profile, even though the resonant frequency is reduced substantially due to the applied strain. For higher amplitude perturbations, nonlinear trapping oscillations also exhibit behavior similar to the strain-free case. In principle, higher-order effects of the applied strain, such as separatrix crossing of peripheral vorticity and interactions with harmonics of the fundamental resonance, are expected to change the damping rate. However, this occurs only for conditions that are not realized in the experiments described here. Vortex-in-cell simulations are used to investigate the possible roles of these effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

A transient site balance model for atomic layer etching

We present a transient site balance model of plasma-assisted atomic layer etching of silicon (Si) with alternating exposure to chlorine gas (Cl 2 ) and argon ions (Ar + ). Molecular dynamics (MD) simulation results are used to provide parameters for the model. The model couples the dynamics of a top monolayer surface region ('top layer') and a perfectly mixed subsurface region ('mixed layer'). The differential equations describing the rates of change of the Cl coverage in the two layers are transient mass balances. Model predictions include Cl coverages and rates of etching of various species from the surface as a function of Cl 2 or Ar + fluence. The simplified phenomenological model reproduces the MD simulation results well over a range of conditions. Comparing model predictions directly to experimental optical emission spectroscopy data, as reported in a previous paper, provides further evidence of the accuracy of the model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

On the parameter combinations that matter and on those that do not: data-driven studies of parameter (non)identifiability

Abstract We present a data-driven approach to characterizing nonidentifiability of a model’s parameters and illustrate it through dynamic as well as steady kinetic models. By employing Diffusion Maps and their extensions, we discover the minimal combinations of parameters required to characterize the output behavior of a chemical system: a set of effective parameters for the model. Furthermore, we introduce and use a Conformal Autoencoder Neural Network technique, as well as a kernel-based Jointly Smooth Function technique, to disentangle the redundant parameter combinations that do not affect the output behavior from the ones that do. We discuss the interpretability of our data-driven effective parameters, and demonstrate the utility of the approach both for behavior prediction and parameter estimation. In the latter task, it becomes important to describe level sets in parameter space that are consistent with a particular output behavior. We validate our approach on a model of multisite phosphorylation, where a reduced set of effective parameters (nonlinear combinations of the physical ones) has previously been established analytically.

Evangelou, Nikolaos↗
DOE OSTI2022

Phonon-induced rotation of the electronic nematic director in superconducting Bi 2 Se 3

The doped topological insulator A x Bi 2 Se 3 , with A = {Cu,Sr,Nb}, becomes a nematic superconductor below T c ≈ 3–4 K. The associated electronic nematic director is described by an angle α and is experimentally manifested in the elliptical shape of the in-plane critical magnetic field H c2 . Because of the threefold rotational symmetry of the lattice, α is expected to align with one of three high-symmetry directions corresponding to the in-plane nearest-neighbor bonds, consistent with a Z 3 -Potts nematic transition. Here, we show that the nematic coupling to the acoustic phonons, which makes the nematic correlation length tend to diverge along certain directions only, can fundamentally alter this phenomenology in trigonal lattices. Compared to hexagonal lattices, the former possesses a sixth independent elastic constant c14 due to the fact that the in-plane shear strain doublet (ε xx – ε yy , – 2ε xy ) and the out-of-plane shear strain doublet (2ε yz , – 2ε zx ) transform as the same irreducible representation. We find that, when c 14 overcomes a threshold value, which is expected to be the case in doped Bi 2 Se 3 , the nematic director α unlocks from the high-symmetry directions due to the competition between the quadratic phonon-mediated interaction and the cubic nematic anharmonicity. This implies the breaking of the residual in-plane twofold rotational symmetry (C 2x ), resulting in a triclinic phase. Furthermore, we discuss the implications of these findings for the structure of nematic domains, for the shape of the in-plane H c2 in A x Bi 2 Se 3 , and for the presence of nodes inside the superconducting state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Ultrafast X-Ray Scattering Reveals Composite Amplitude Collective Mode in the Weyl Charge Density Wave Material ( TaSe 4 ) 2 I

Here we report ultrafast x-ray scattering experiments of the quasi-1D charge density wave (CDW) material (TaSe 4 ) 2⁢ I following ultrafast infrared photoexcitation. From the time-dependent diffraction signal at the CDW sidebands we identify a 0.11 THz amplitude mode derived primarily from a transverse acoustic mode of the high-symmetry structure. From our measurements we determine that this mode interacts with the valence charge indirectly through another collective mode, and that the CDW system in (TaSe 4 ) 2 ⁢I has a composite nature supporting multiple dynamically active structural degrees of freedom.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Hybrid Symbolic-Numerical Modeling and Parametric Stability Analysis of DC–AC Power Systems

Hybrid DC-AC power systems integrating diverse inverter-based resources (IBRs) and multi-terminal high-voltage direct current (MTDC) networks represent a promising architecture for future power grids, while introducing challenges for modeling, stability analysis, and control design. This paper develops a hybrid symbolic-numerical modeling framework and tool to characterize the parametric small-signal stability of DC-AC coupled power systems. The proposed approach constructs parametric state-space models to enable efficient representation of system dynamics under varying control parameters and network configurations, with target parameters retained as symbolic variables and the remainder treated numerically. The stability analysis framework covers eigenvalue, sensitivity, and stability boundary and region characterization. Enhanced linear matrix inequality (LMI) techniques are proposed to directly certify small-signal stability over regions of parameter space while also reducing the conservativeness and computational burden. The resulting tools and frameworks enable rapid parametric model construction across diverse grid conditions, thereby facilitating stability-informed control and operation in complex DC–AC power systems.

DC–AC power systems↗
DOE OSTI2021

Decentralized Filtering Adaptive Neural Network Control for Uncertain Switched Interconnected Nonlinear Systems

This article presents a novel decentralized filtering adaptive neural network control framework for uncertain switched interconnected nonlinear systems. Each subsystem has its own decentralized controller based on the established decentralized state predictor. For each subsystem, the nonlinear uncertainties are approximated by a Gaussian radial basis function (GRBF) neural network incorporated with a piecewise constant adaptive law, where the adaptive law will update adaptive parameters from the error dynamics between the host system and the decentralized state predictor by discarding the unknowns, whereas a decentralized filtering control law is derived to cancel both local and mismatched uncertainties from other subsystems, as well as achieve the local objective tracking of the host system. The achievement of global objective depends on the achievement of local objective for each subsystem. The matched uncertainties are canceled directly by adopting their opposite in the control signal, whereas a dynamic inversion of the system is required to eliminate the effect of the mismatched uncertainties on the output. By exploiting the average dwell time principle, the error bounds between the real system and the virtual reference system, which defines the best performance that can be achieved by the closed-loop system, are derived. A numerical example is given to illustrate the effectiveness of the decentralized filtering adaptive neural network control architecture by comparing against the model reference adaptive control (MRAC).

Average dwell time, decentralized, filtering adapt↗
DOE OSTI2020

PredCom: A Predictive Approach to Collecting Approximated Communication Traces

Communication traces collected from MPI applications are an important source of information for performance optimization as they can help analysts determine communication patterns and identify inefficiencies. However, their collection, especially at scale, is time consuming, since it usually requires running the complete target application on a large number of nodes. In this work, we present PredCom, a tool-chain to generate a predictive communication proxy based on information gathered from a few small scale runs, which allows us to extract approximate communication traces with an accuracy high enough for most analysis goals. For this, we combine LLVM passes on the original source code (to capture static program structure) with parameter prediction (to capture dynamic and scaling behavior). This approach drastically reduces the time needed for collecting the communication traces, even for traces on large numbers of MPI processes. Here, we demonstrate that PredCom generates communication traces of various applications up to 1612x faster with an accuracy loss of 0.11 on average compared to the original large-scale traces, and we show that the generated traces can be used to optimize process placement.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

JANUS: Resilient and Adaptive Data Transmission for Enabling Timely and Efficient Cross-Facility Scientific Workflows

In modern science, the growing complexity of large-scale scientific projects has led to an increasing reliance on cross-facility scientific workflows, where resources and expertise from multiple institutions and geographic locations are leveraged to accelerate scientific discovery. These workflows often require transmitting huge amounts of scientific data through wide-area networks. Although high-speed networks like ESnet and transfer services such as Globus have improved data mobility, several challenges remain. The sheer volume of data can overwhelm network bandwidth, widely used transport protocols such as TCP suffer from inefficiencies due to retransmissions triggered by packet loss, and existing fault-tolerance mechanisms like erasure coding introduce substantial overhead. In this paper, we propose Janus, a resilient and adaptable data transmission approach designed for cross-facility scientific workflows. Unlike traditional TCP-based methods, Janus leverages UDP, integrates erasure coding for fault tolerance, and combines it with error-bounded lossy compression to reduce overhead. This novel design allows users to balance data transmission time and accuracy, optimizing transfer performance based on specific scientific requirements. Additionally, Janus dynamically adjusts erasure coding parameters in response to real-time network conditions, ensuring efficient data transfers even in fluctuating environments. We develop optimization models for determining ideal configurations and implement adaptive data transfer protocols to enhance reliability. Through extensive simulations and real-network experiments, we demonstrate that Janus significantly improves transfer efficiency while maintaining data fidelity.

Esaulov, Vladislav [Georgia State University, Atla↗