Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diodes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Efficiency droop contributors in InGaN green light emitting diodes

Here, efficiency droop contributors (i.e., inherent Auger–Meitner recombination, polarization-induced effects, thermal effects, and light extraction) in InGaN green light emitting diodes (LEDs) are decoupled and quantified. First, a modified ABC model is developed, and external quantum efficiency measurements are taken under constant and pulsed currents (⁠ EQE Constant and EQE Pulsed ⁠, respectively). The LED internal quantum efficiency with and without thermal effects (⁠ IQE$^{ABC}_{Constant}$ and IQE$^{ABC}_{Pulsed}$⁠, respectively) is extracted using the modified model. Then, using Raman spectroscopy, the LED junction temperature is extracted. Finally, using the optical-electrical model (OEM), the polarization- and temperature-independent LED internal quantum efficiency (⁠ IQE OEM ) is calculated from the modified ABC model and the extracted junction temperature. By comparing external (⁠ EQE Constant ⁠) and the three internal quantum efficiencies (⁠ IQE$^{ABC}_{Constant}$, IQE$^{ABC}_{Pulsed}$⁠, and IQE OEM ), the impacts of inherent Auger–Meitner recombination, polarization-induced effects, thermal effects, and light extraction on the efficiency droop are decoupled and quantified. It is found that inherent Auger–Meitner recombination-induced droop is approximately 49% of the total efficiency droop in commercial green LEDs, while polarization-induced effects contribute about 35%, and thermal droop accounts for nearly 16%. Lastly, these findings suggest, to quash the green gap, it is critical to search for materials and device designs with low inherent Auger–Meitner coefficients and polarization fields, respectively.

42 ENGINEERING↗
DOE OSTI2021

Design and Demonstration of AlxIn1-xP Multiple Quantum Well Light-Emitting Diodes

Direct bandgap AlxIn1-xP alloys offer an advantage for red and amber light-emitting diode (LED) operation over conventional (AlxGa1-x)0.5In0.5P alloys due to their higher direct bandgap energies. However, the coupled variation of its bandgap energy and lattice constant present challenges for fabricating quantum well-based LED devices on GaAs substrates. Here, we present the design and demonstration of AlxIn1-xP red and amber LEDs incorporating multiple quantum well structures. Strain balancing the quantum well layers and manipulating the AlxIn1-xP conduction band energy through control of spontaneous atomic ordering produce structures with higher electron confinement barriers than comparable (AlxGa1-x)0.5In0.5P LEDs. We also discuss future improvements that must be made to realize high efficiency red and amber LEDs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Roadmap on perovskite light-emitting diodes

Abstract In recent years, the field of metal-halide perovskite emitters has rapidly emerged as a new community in solid-state lighting. Their exceptional optoelectronic properties have contributed to the rapid rise in external quantum efficiencies (EQEs) in perovskite light-emitting diodes (PeLEDs) from <1% (in 2014) to over 30% (in 2023) across a wide range of wavelengths. However, several challenges still hinder their commercialization, including the relatively low EQEs of blue/white devices, limited EQEs in large-area devices, poor device stability, as well as the toxicity of the easily accessible lead components and the solvents used in the synthesis and processing of PeLEDs. This roadmap addresses the current and future challenges in PeLEDs across fundamental and applied research areas, by sharing the community’s perspectives. This work will provide the field with practical guidelines to advance PeLED development and facilitate more rapid commercialization.

14 SOLAR ENERGY↗
DOE OSTI2021

Magnetic skyrmion diode: Unidirectional skyrmion motion via symmetry breaking of potential energy barriers

In this work, we realize a magnetic skyrmion diode operated by a unidirectional skyrmion transport that flows in only one direction, which is highly significant for information processing in spintronic and nanoelectronic devices. We easily control the skyrmion transport by engineering asymmetric shapes of geometric structures. Here, we present a simple method to describe the underlying mechanism behind the unidirectional skyrmion transport by characterizing the topography of potential energy surfaces from a purely geometric perspective. Our approach enables a deeper physical insight into skyrmion transport manipulation and efficient design of skyrmion-based devices in geometric structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Switching Characteristics of a 1.2 kV, 50 mΩ SiC Monolithic Bidirectional Field Effect Transistor (BiDFET) with Integrated JBS Diodes

—The switching performance of large area (1cm x 1cm) monolithic 1.2 kV 50 mΩ 4H-SiC bidirectional field effect transistor (BiDFET) with integrated JBS diodes is reported for the first time. The devices were fabricated in a 6-inch commercial foundry and then packaged in a custom-designed four-terminal module. The switching performance of the BiDFET has been observed to be 1.4x better than that of its internal JBSFETs. Dynamic characterization was performed at 800 V with different gate resistances, current levels and case temperatures. An increase in switching losses was observed for the BiDFET with increasing gate resistance and current level as observed for SiC power MOSFETs. The BiDFET showed a 9% reduction in total switching loss from 25 °C to 150 °C with a current of 10 A.

Silicon Carbide, Monolithic, Bidirectional, FourQu↗
DOE OSTI2023

High-Resolution Thermal Profiling of a High-Power Diode Laser Facet During Aging

Here, we study the facet temperature distribution of a high-power diode laser over its lifetime using a noncontact, high spatial resolution CCD-based thermoreflectance technique. Based on the known correlation between non-radiative defects and heating, thermal maps can provide valuable information regarding the formation and evolution of small point defects that are at or near the facet during aging. In the laser under study in this work we measure the appearance of local hot spots on the facet, including concentrated hot spots that appear just before or just after COD and are correlated with loss of local light emission. The locations of these hot spots do not exhibit morphology changes in high-resolution SEM imaging of the facet, indicating that the related defects are too small to be observable in SEM or are located at some depth under the facet. Prior to COD, we measure a gradual facet temperature increase accompanied by a gradual optical power decrease and gradual facet optical absorption increase, indicating gradual degradation of the laser.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Experimental Demonstration of Charge-Balanced GaN Super-Heterojunction Schottky Barrier Diode Capable of 2.8 kV Switching

This letter reports an experimental demonstration of charge-balanced GaN super-heterojunction Schottky barrier diodes (SHJ-SBDs). Charge balance between the n-type delta-doping and the p-type doping was achieved by adjusting the thickness of the pGaN. Furthermore, this device structure enabled scaling of breakdown voltage to over 3 kV, and dynamic switching up to 2.8 kV without using any field-plate.

42 ENGINEERING↗
DOE OSTI2021

12.5 kV GaN Super-Heterojunction Schottky Barrier Diodes

In this work, we report GaN super-heterojunction Schottky barrier diodes (SHJ-SBDs) with substantially improved performance. Metal-2DEG sidewall n-ohmic contacts were deployed to achieve low contact resistance of 0.75 Ω · mm, avoiding the risk of abnormally high contact resistance caused by inaccurate etch depth control. A pGaN notch formed near the cathode successfully eliminated excessive hole conduction caused by the sidewall n-ohmic contact. Isolation was improved by a high-energy Al implantation step. The resulting SHJ-SBD exhibited a breakdown voltage (BV) of 12.5 kV and a specific ON-resistance of 100.8 mΩ · cm 2 .

42 ENGINEERING↗
DOE OSTI2021

Comparison of Single-Event Transients in an Epitaxial Silicon Diode Resulting from Heavy Ion-, Focused X-Ray-, and Pulsed Laser-Induced Charge Generation

Heavy ion, focused x-ray, and pulsed laser single event transient experiments are performed on a silicon epitaxial diode. Collected charge, transient rise times, and transient fall times are calculated and compared between the different sources. It is observed that these transient shape characteristics depend on the source (ion, x-ray, or laser), even when similar amounts of charge are generated. Finally, the observed differences are examined and explained in terms of basic charge collection mechanisms.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

A study on the impact of mid-gap defects on vertical GaN diodes

GaN is a favorable martial for future efficient high voltage power switches. GaN has not dominated the power electronics market due to immature substrate, homoepitaxial growth, and immature processing technology. Understanding the impact of the substrate and homoepitaxial growth on the device performance is crucial for boosting the performance of GaN. Here, we studied vertical GaN PiN diodes that were fabricated on non-homogenous Hydride Vapor Phase Epitaxy (HVPE) substrates from two different vendors. We show that defects which stemmed from growth techniques manifest themselves as leakage hubs. Different non-homogenous substrates showed different distribution of those defects spatially with the lesser quality substrates clustering those defects in clusters that causes pre-mature breakdown. Energetically these defects are mostly mid-gap around 1.8Ev with light emission spans from 450nm to 700nm. Photon emission spectrometry and hyperspectral electroluminescence were used to locate these defects spatially and energetically.

42 ENGINEERING↗
DOE OSTI2023

Design of InGaN-ZnSnGa 2 N 4 quantum wells for high-efficiency amber light emitting diodes

A novel type-II InGaN-ZnSnGa 2 N 4 quantum well (QW) structure is proposed based on recent experimental achievements for the successful epitaxy of ZnSnN 2 -GaN alloys and the determination of their band offsets with GaN. The simulation results indicate that this structure is promising as the active region for high-efficiency InGaN-based amber (λ ~ 590 nm) light-emitting diodes (LEDs). The hole wavefunction in the valence band is better confined with the insertion of a monolayer scale of ZnSnGa 2 N 4 into the InGaN QW while the electron wavefunction in the conduction band is better confined with the incorporation of an AlGaN layer in the GaN quantum barrier. The band structure of the InGaN-ZnSnGa 2 N 4 QW is numerically simulated based on the experimentally measured band offsets between ZnSnGa 2 N 4 and GaN. With the InGaN-ZnSnGa 2 N 4 QW design, a low In content (20%) is required in the InGaN layer to reach a peak emission wavelength of ~590 nm, yet an In composition of 25% is needed to reach the same emission wavelength for a conventional InGaN QW with the same layer thicknesses. Moreover, the electron-hole wavefunction overlap (Гe1-hh1) for the InGaN-ZnSnGa 2 N 4 QW design reaches 18% for an emission wavelength at ~590 nm. This result is much improved over the conventional InGaN QW overlap of 5% emitting at the same wavelength. The increase in electron-hole wavefunction overlap results in an approximately 14 times enhancement in the predicted spontaneous emission radiative recombination rate of the InGaN-ZnSnGa 2 N 4 QW as compared to that of the conventional InGaN QW. This InGaN-ZnSnGa 2 N 4 QW structure design can be promising to pave a new way to achieve high efficiency amber LEDs.

42 ENGINEERING↗
DOE OSTI2023

Light-sheet autofluorescence lifetime imaging with a single-photon avalanche diode array

Significance: Fluorescence lifetime imaging microscopy (FLIM) of the metabolic co-enzyme nicotinamide adenine dinucleotide (phosphate) [NAD(P)H] is a popular method to monitor single-cell metabolism within unperturbed, living 3D systems. However, FLIM of NAD(P)H has not been performed in a light-sheet geometry, which is advantageous for rapid imaging of cells within live 3D samples. Aim: We aim to design, validate, and demonstrate a proof-of-concept light-sheet system for NAD(P)H FLIM. Approach: A single-photon avalanche diode camera was integrated into a light sheet microscope to achieve optical sectioning and limit out-of-focus contributions for NAD(P)H FLIM of single cells. Results: An NAD(P)H light-sheet FLIM system was built and validated with fluores cence lifetime standards and with time-course imaging of metabolic perturbations in pancreas cancer cells with 10 s integration times. NAD(P)H light-sheet FLIM in vivo was demonstrated with live neutrophil imaging in a larval zebrafish tail wound also with 10 s integration times. Finally, the theoretical and practical imaging speeds for NAD(P)H FLIM were compared across laser scanning and light-sheet geometries, indicating a 30× to 6× acquisition speed advantage for the light sheet compared to the laser scanning geometry. Conclusions: FLIM of NAD(P)H is feasible in a light-sheet geometry and is attrac tive for 3D live cell imaging applications, such as monitoring immune cell metabolism and migration within an organism.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Operating Lifetime Study of Ultraviolet (UV) Light-Emitting Diode (LED) Products

Light-emitting diodes (LEDs) can emit radiation that spans the range from near infrared (IR) to all three bands of ultraviolet (UV) radiation: UV-A, UV-B, and UV-C. This report focuses on LEDs that emit in one of the three UV bands because they have the potential to displace lowpressure mercury vapor (LPMV) lamps in a variety of industrial processes, including ink and adhesive curing, medical procedures, and germicidal disinfection. However, before emerging UV LED technologies can displace LPMV lamps, the efficiency and reliability of these sources must meet the user’s expectations in each application. An earlier report focused on the construction and initial performance of commercial UV LED products in radiometric and current-voltage (IV) tests [1]. This report focuses on the long-term performance and reliability of the same set of commercial products. The intent of this report is to provide to the lighting industry a benchmark of the state of UV LEDs as of mid-2021 when these products were purchased. Understanding the failure modes and failure rates of UV LEDs is important in improving UV product reliability at the LED, lamp, and luminaire level and is critical to developing products with higher efficiency, lower carbon footprint, and significantly reduced environmental impact than LPMV lamps.

42 ENGINEERING↗
DOE OSTI2022

Ross Filter Diode Array Analysis for Red Sage

A Ross Filter Diode Array (RFDA) diagnostic was fielded on the Cygnus x-ray source during the final stages of the Red Sage campaign. This report briefly describes the motivation for the diagnostic, its construction and operating principles, and the raw data that it produces followed by an in-depth look at the procedures used to analyze this data. RFDA signals from eight Cygnus shots conducted after the conclusion of Nightshade C are analyzed and those results are discussed. Finally, recommendations are made to improve the diagnostic for future experiments.

42 ENGINEERING↗
DOE OSTI2022

Low Forward Voltage III-Nitride Red Micro-Light-Emitting Diodes on a Strain Relaxed Template with an InGaN Decomposition Layer

In this study, III-nitride red micro-light-emitting diodes (µLEDs) with ultralow forward voltage are demonstrated on a strain relaxed template. The forward voltage ranges between 2.00 V and 2.05 V at 20 A/cm 2 for device dimensions from 5 x 5 to 100 x 100 µm 2 . The µLEDs emit at 692 nm at 5 A/cm 2 and 637 nm at 100 A/cm 2 , corresponding to a blueshift of 55 nm due to the screening of the internal electric field in the quantum wells. The maximum external quantum efficiency and wall-plug efficiency of µLEDs are 0.31% and 0.21%, respectively. This suggests that efficient III-nitride red µLEDs can be realized with further material optimizations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Volumetric carrier injection in InGaN quantum well light emitting diodes

InGaN/GaN quantum well (QW) light emitting diodes (LEDs) are essential components of solid-state lighting and displays. However, the efficiency of long wavelength (green to red) devices is inferior to that of blue LEDs. To a large degree, this occurs because the equilibration of injected holes between multiple QWs of the active region is hindered by GaN quantum confinement and polarization barriers. This drawback could be overcome by volumetric hole injection into all QWs through semipolar QWs present on the facets of V-defects that form at threading dislocations in polar GaN-based structures. In this work, we have tested the viability of this injection mechanism and studied its properties by time-resolved and near-field spectroscopy techniques. Here, we have found that indeed the hole injection via the V-defects does take place, the mechanism is fast, and the hole spread from the V-defect is substantial, making this type of injection feasible for efficient long wavelength GaN LEDs.

InGaN/GaN quantum wells↗
DOE OSTI2021

Band Edge Control of Quasi–2D Metal Halide Perovskites for Blue Light–Emitting Diodes with Enhanced Performance

Perovskite light–emitting diodes (PeLEDs) have received great attention for their potential as next–generation display technology. While remarkable progress has been achieved in green, red, and near–infrared PeLEDs with external quantum efficiencies (EQEs) exceeding 20%, obtaining high performance blue PeLEDs remains a challenge. Poor charge balance due to large charge injection barriers in blue PeLEDs has been identified as one of the major roadblocks to achieve high efficiency. Here band edge control of perovskite emitting layers for blue PeLEDs with enhanced charge balance and device performance is reported. By using organic spacer cations with different dipole moments, that is, phenethyl ammonium (PEA), methoxy phenethyl ammonium (MePEA), and 4–fluoro phenethyl ammonium (4FPEA), the band edges of quasi–2D perovskites are tuned without affecting their band gaps. Furthermore, detailed characterization and computational studies have confirmed the effect of dipole moment modification to be mostly electrostatic, resulting in changes in the ionization energies of ≈0.45 eV for MePEA and ≈ –0.65 eV for 4FPEA based thin films relative to PEA–based thin films. With improved charge balance, blue PeLEDs based on MePEA quasi–2D perovskites show twofold increase of the EQE as compared to the control PEA based devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Highly Efficient Pure‐Blue Light‐Emitting Diodes Based on Rubidium and Chlorine Alloyed Metal Halide Perovskite

Abstract Perovskite light‐emitting diodes (PeLEDs) are promising candidates for display and solid‐state lighting, due to their tunable colors, high conversion efficiencies, and low cost. However, the performance of blue PeLEDs is far inferior to that of the near‐infrared, red, and green counterparts. Here, the fabrication of pure‐blue PeLEDs with an emission peak at 475 nm, a peak external quantum efficiency of 10.1%, and a maximum luminance of 14 000 cd m −2 is demonstrated by tailoring the compositions of perovskites. The pure‐blue electroluminescence is achieved by simultaneous addition of rubidium and chlorine ions into CsPbBr 3 and incorporation of phenylethylammonium chloride forms quasi‐2D hybrid perovskites. The combination of these composition engineering results in blueshifted emissions without reducing the quantum yield. The judicious alloying is shown to be critical to result in the better morphology with suppressed current leakage and enhanced light outcoupling.

Yang, Yang↗