Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffusion rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Laser-stimulated migration of adsorbed atoms on solid surfaces

This paper presents a unified theory of the coherent, multiple-photon excitation and laser-stimulated migration of atoms adsorbed on solid surfaces. We show that under steady-state excitation the migration of the adsorbed atom on the surface is diffusional, with diffusion constant dependent upon field intensity, surface temperature, relaxation constants, dipole moment strength, laser frequency, and the vibrational frequency of the adsorbed atom. In particular, it is shown that the rate of diffusion is proportional to the field intensity. Finally, we discuss the utility of laser-stimulated migration in the enhancement of surface chemical reactions, as well as in the analysis of surface relaxational processes.

Slutsky, M. S.↗

The Oxidation Kinetics of Continuous Carbon Fibers in a Cracked Ceramic Matrix Composite

Experimental observations and results suggest two primary regimes as a function of temperature, i.e., diffusion and reaction controlled kinetics. Thermogravimetric analysis of carbon fiber in flowing oxygen gave an activation energy of 64.1 kJ/mol in the temperature range of 500 to 600 C and an apparent activation energy of 7.6 kJ/mol for temperatures from 600 to 1400 C. When C/SiC composite material was unstressed, matrix effects at temperatures from 900 to 1400 C protected the internal fibers. When under stress, self-protection was not observed. Increasing the stress from 10 to 25 ksi caused a 67 to 82 percent reduction in times to failure at temperatures from 750 to 1500 C. Based on experimental results, observation, and theory, a finite difference model was developed, which simulates the diffusion of oxygen into a matrix crack that is bridged by carbon fibers. The model allows the influence of important variables on oxidation kinetics to be studied systematically, i.e., temperature, reaction rate constant, diffusion coefficient, environment, and sample geometry.

Halbig, Michael C.↗

Low pressure radon diffusion - A laboratory study and its implications for lunar venting

Results of a study of radon migration through columns of fine particulate materials, at total pressures of 0.02-0.2 torr, are reported. Materials studied were: NBS Glass Spheres (SRM 1003), Emerson & Cuming Eccospheres (IG-101), activated coconut charcoal, Lipaci obsidian, and W-1 Standard Diabase. Rates of diffusion were used to derive heats of adsorption for radon on the materials tested. The most reliable values found clustered around 8-9 kcal/mole. These high heats of adsorption, if typical for most materials, combined with low percentages of radon emanation by lunar soils found by other researchers, imply that random walk diffusion will not be an important mechanism for redistributing the radon and the radon daughters produced in the lunar regolith. In particular, since random walk migration is not a sufficient mechanism to account for localized high concentrations of radon-222 and its daughter polonium-210 observed by the Apollo 15 and 16 command modules, an alternative mechanism is proposed, in which radon would be swept to the surface by other gases during intermittent venting events.

Friesen, L. J.↗

Limits on ion radial diffusion coefficients in Saturn's inner magnetosphere

The development of upper and lower limits for the rate of radial diffusion of energetic ions in Saturn's inner magnetosphere is discussed. Improved calculations of the satellite-sweeping rate and phase space density profiles for a wide range of ion invariants are utilized to determine the limits. The lower limit for the radial diffusion coefficient is established by requiring the rate of inward diffusion to be large enough to balance satellite sweeping losses; the upper limit is obtained by requiring the rate of inward diffusion to be less than the observable ultraviolet aurora on plasma torus L shell. It is concluded that the radial diffusion coefficient for ions in Saturn's inner magnetosphere is calculated to about two orders of magnitude.

Paonessa, M.↗

Collision cross sections and diffusion parameters for H and D in atomic oxygen

Modeling the behavior of H and D in planetary exospheres requires detailed knowledge of the differential scattering cross sections for all of the important neutral-neutral and ion-neutral collision processes affecting these species over their entire ranges of interaction energies. In the upper atmospheres of Earth, Venus, and other planets as well, the interactions of H and D with atomic oxygen determine the rates of diffusion of escaping hydrogen isotopes through the thermosphere, the velocity distributions of exospheric atoms that encounter the upper thermosphere, the lifetimes of exospheric orbiters with periapsides near the exobase, and the transfer of momentum in collisions with hot O. The nature of H-O and D-O collisions and the derivation of a data base consisting of phase shifts and the differential, total, and momentum transfer cross sections for these interactions in the energy range 0.001 - 10 eV are discussed. Coefficients of mutual diffusion and thermal diffusion factors are calculated for temperatures of planetary interest.

Hodges, R. R., Jr.↗

Trace elements in migrating high-temperature fluids: Effects of diffusive exchange with the adjoining solid

Trace element concentrations and isotopic ratios are frequently used to study the behavior of high-temperature fluids in both metamorphic and igneous systems. Many theoretical formulations of the effects of fluid migration on trace elements have assumed instantaneous reequilibration between the migrating fluid and the solid material through which it is passing. This paper investigates the additional effects which arise when equilibration is not instantaneous due to a limited rate of diffusion in the solid, using an analytical steady state solution to a set of partial differential equations describing the exchange of trace elements between the fluid and the solid during the migration of the fluid.

Kenyon, Patricia M.↗

Radiant extinction of gaseous diffusion flames

The absence of buoyancy-induced flows in microgravity significantly alters the fundamentals of many combustion processes. Substantial differences between normal-gravity and microgravity flames have been reported during droplet combustion, flame spread over solids, candle flames, and others. These differences are more basic than just in the visible flame shape. Longer residence time and higher concentration of combustion products create a thermochemical environment which changes the flame chemistry. Processes such as flame radiation, that are often ignored under normal gravity, become very important and sometimes even controlling. This is particularly true for conditions at extinction of a microgravity diffusion flame. Under normal-gravity, the buoyant flow, which may be characterized by the strain rate, assists the diffusion process to transport the fuel and oxidizer to the combustion zone and remove the hot combustion products from it. These are essential functions for the survival of the flame which needs fuel and oxidizer. Thus, as the strain rate is increased, the diffusion flame which is 'weak' (reduced burning rate per unit flame area) at low strain rates is initially 'strengthened' and eventually it may be 'blown-out'. Most of the previous research on diffusion flame extinction has been conducted at the high strain rate 'blow-off' limit. The literature substantially lacks information on low strain rate, radiation-induced, extinction of diffusion flames. At the low strain rates encountered in microgravity, flame radiation is enhanced due to: (1) build-up of combustion products in the flame zone which increases the gas radiation, and (2) low strain rates provide sufficient residence time for substantial amounts of soot to form which further increases the flame radiation. It is expected that this radiative heat loss will extinguish the already 'weak' diffusion flame under certain conditions. Identifying these conditions (ambient atmosphere, fuel flow rate, fuel type, etc.) is important for spacecraft fire safety. Thus, the objective is to experimentally and theoretically investigate the radiation-induced extinction of diffusion flames in microgravity and determine the effect of flame radiation on the 'weak' microgravity diffusion flame.

Atreya, Arvind↗

Silicon oxide films grown in microwave discharge

Silicon oxide films thicker than 1000 angstrom are produced in the dense plasma of a microwave discharge. The oxide growth is characterized by a rate limiting diffusion process modified by sputtering effects produced by the discharge. Silicon is rapidly oxidized at temperatures estimated to be 500 degrees C or lower.

Kraitchman, J.↗

Anomalous FIM images of tungsten.

Observation of unusual field-ion images consisting of bright bands of variable width parallel to the 111 (in carets) zones in tungsten at 78 K. Typical conditions for the effect are: pulse width from 1 to 50 microsec and pulse height adjusted so that five to ten pulses are required to remove one (110) plane. The influence of a number of accessible variables was studied and the results lead to a two-mechanism model for field evaporation involving (1) a slow process requiring helium promotion and (2) unpromoted evaporation when the local helium supply is depleted at high rates. The model implies that helium diffusion is rate-limiting in the promotion mechanism and leads to a migration energy of about 0.15 eV during field evaporation. There is a measurable difference in end form in the limits of high- and low-field evaporation rates. High rates are nearly isotropic and yield a more hemispherical end form.

Hren, J. J.↗

The mechanism of grain growth in ceramics

The theory of grain boundary migration as a thermally activated process is reviewed, the basic mechanisms in ceramics being the same as in metals. However, porosity and non-stochiometry in ceramic materials give an added dimension to the theory and make quantitative treatment of real systems rather complex. Grain growth is a result of several simultaneous (and sometimes interacting) processes; these are most easily discussed separately, but the overall rate depends on their interaction. Sufficient insight into the nature of rate controlling diffusion mechanisms is necessary before a qualitative understanding of boundary mobility can be developed.

Kapadia, C. M.↗

Preliminary numerical analysis of improved gas chromatograph model

A mathematical model for the gas chromatograph was developed which incorporates the heretofore neglected transport mechanisms of intraparticle diffusion and rates of adsorption. Because a closed-form analytical solution to the model does not appear realizable, techniques for the numerical solution of the model equations are being investigated. Criteria were developed for using a finite terminal boundary condition in place of an infinite boundary condition used in analytical solution techniques. The class of weighted residual methods known as orthogonal collocation is presently being investigated and appears promising.

Woodrow, P. T.↗

Artificially created holes in the ionosphere

The artificial creation of ionospheric holes by the release of highly reactive molecules into the F region is investigated. Through ion-atom interchange or charge transfer reactions, H2 or H2O reacts with O(+) to form OH(+) or H2O(+), respectively, which subsequently dissociatively recombines with electrons at a very rapid rate. The diffusion of H2 is also modified by chemical loss to the ambient atomic oxygen atmosphere. The limited spatial and temporal extent of the hole-making process allows several approximations to be made which permit three-dimensional analytic solutions of the continuity equations for the released particles, the O(+) and e(-) densities, and the intermediary molecular ions. A versatile formalism is developed whereby the hole-making capability of virtually any spatial-temporal configuration of released particles can be determined by convolving a set of destruction operators which can be viewed as Green's functions for the problem. As a specific application of the techniques developed, the modification of a winter nighttime ionosphere is described by simulating the release of 1000 kg of water vapor near a height of 300 km.

Mendillo, M.↗

Thermal and nonthermal escape mechanisms for terrestrial bodies

A survey is given of the classical thermal escape (Jeans or blowoff) and some eight nonthermal processes involving ions. Diffusional, energetic, and other limitations on the escape flux are discussed. Isotopic fractionation, due to differences in thermal escape rates or diffusive separation, is considered. The dominant processes acting at the five terrestrial planets and six major satellites are summarized. In general, nonthermal processes dominate over the classic thermal ones.

Hunten, D. M.↗

Evolution of an impact-generated dust cloud and its effects on the atmosphere

A simulation is carried out of the evolution of an optically thick dust cloud in the earth's atmosphere, and calculations are made of the effects that such a dust cloud would have on the amount of visible light reaching the surface and the temperature at the earth's surface. It is found that large quantities of dust remain in the atmosphere for periods of only three to six months. This duration is fixed by the physical processes of coagulation; these cause the rapid formation of micron-sized particles and sedimentation that quickly removes the particles from the atmosphere. The duration of the event is found to be nearly independent of the initial altitude, initial particle size, initial mass, atmospheric vertical diffusive mixing rate, and rainout rate. It depends to a slight extent on the particle density and the probability that colliding particles stick together to form a larger particle. In addition, the duration is limited by the rate at which the debris spreads from the initial impact site. A doubling code is used to calculate the visible radiative transfer in the dust clouds. It is found that light levels are too low for vision for one to six months and too low for photosynthesis for two months to one year.

Toon, O. B.↗

Escape of sulfur and oxygen from Io

Charged particle sputtering is reexamined as a mechanism for escape of sulfur and oxygen from Io. Corotating ions and energetic ions are considered, using the best available determinations of ion fluxes and sputtering yields. It is unclear whether molecular SO2 is the dominant escaping neutral from Io or whether atomic O and S are dominant, but the Voyager detection of SO2(+) in the cold torus implies the presence of molecular SO2 there. Thin atmosphere models encounter serious difficulty in achieving adequate sulfur and oxygen escape rates, but they are not yet ruled out. Ionization and dissociation of SO2 in a sputter corona can dominate direct escape. In thick atmosphere models the neutral escape rates can be much higher, but the oxygen escape rate tends to be too high relative to the sulfur escape rate unless diffusive separation in the atmosphere is limited, perhaps by rapid mixing.

Cheng, A. F.↗

A Circum-terrestrial Compositional Filter

A major question about the moon is its under abundance of iron. It is the purpose of this research to understand whether a metal-silicate fractionation of heliocentrically orbiting bodies can be achieved through collisional interactions with a circum-terrestrial swarm. Rates of diffusion are investigated and the mutual collisional destruction within the population is examined. The interactions of these differentiated planetesimals and their collisional products (both silicate mantle fragments and iron cores) with a swarm of Earth orbiting lunesimals (perhaps ejecta from the Earth) of km scale, totaling a mass of order 0.1 lunar mass, extending out 10 or 20 Earth radii are considered. It is found that such a small near Earth population of lunesimals can filter out silicate rich material, while passing iron cores, and form a moon composed partly of terrestrial material, but more substantially of the captured silicate rich portions of the planetesimals.

Chapman, C. R.↗

Polymer/riblet combination for hydrodynamic skin friction reduction

A process is disclosed for reducing skin friction and inhibiting the effects of liquid turbulence in a system involving the flow of a liquid along the surface of a body, e.g., a marine vehicle. This process includes injecting a drag reducing polymer into the valleys of adjacent, evenly spaced, longitudinal grooves extending along the length of the surface of the body, so that the rate of diffusion of the polymer from individual grooves into the liquid flow is predictably controlled by the groove dimensions. When the polymer has diffused over the tips of the grooves into the near wall region of the boundary layer, the polymer effectively reduces the turbulent skin friction. A substantial drag reducing effect is achieved with less polymer than must be used to lower skin friction when the surface of the body is smooth.

Bushnell, Dennis M.↗

Electric currents in F-like planetary ionospheres

In this paper, electrical transport coefficients are found for charged particles in such lightly ionized gases as exist in planetary and stellar atmospheres, like the F-region of the earth's ionosphere. Electric fields and gradients of pressure in the ions and the electrons are taken as the drivers of electric current. Collisions of electrons with ions, and of ions and electrons with neutral particles, are taken into account, and new expressions are generated for electrical conductivity, heating rates, and diffusion of magnetic field. The paper extends and complements the results of an earlier paper by Cole (1990) which dealt with 'E-like' ionospheric regions. A comparison of the results with those of kinetic theory is made.

Cole, K. D.↗