Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffractive production”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Solution combustion synthesis of iron-based alumina catalysts for dehydrogenation of fossil fuels

Microwave-assisted thermocatalytic dehydrogenation of fossil fuels has been proposed as a method for hydrogen production with no CO2 emissions. The byproduct is carbon, which has a commercial value. Iron-based alumina nanocomposites are promising catalysts for this process as they both absorb microwave radiation and catalyze the dehydrogenation. In addition, they may have magnetic properties, which could be used for their separation from the carbon byproduct. Solution combustion synthesis (SCS) is an attractive technique for the fabrication of iron-based alumina nanocomposites because it can produce high specific surface area oxides in a facile manner. However, the effects of the heating mode, the fuel, and the iron/aluminum ratio on the combustion synthesis behavior and the product properties have not been studied yet. In the present work, the iron-based alumina nanocomposites were obtained by SCS using a hotplate, a muffle furnace, and a microwave oven. The initial mixtures were aqueous solutions of iron nitrate, aluminum nitrate, and an organic fuel. The concentrations of the two nitrates were varied in proportion to Fe:Al molar ratios of 1:2, 1:1, and 2:1. Two fuels were tested: citric acid and glycine. The combustion was less vigorous when citric acid was used as the fuel, which is explained by the lower exothermicity of the reaction. X-ray diffraction analysis of the products confirmed the formation of complex oxides of Fe and Al, specifically it detected hercynite and magnetite phases. Brunauer-Emmett-Teller surface area analysis has shown that the powders obtained using citric acid have specific surface areas as high as 276 m2/g, significantly higher than those obtained using glycine. Muffle furnace and hotplate heating led to comparable specific surface areas, while microwave heating resulted in significantly lower specific surface areas. The magnetic properties of the products increase with increasing the Fe/Al molar ratio from 1:2 (no response to a magnetic field) to 1:1 (weak response) and 2:1 (strong response).

solution combustion synthesis, nanoscale oxides, f↗

Characterization of morphology and hydration products of high-volume fly ash paste by monochromatic scanning x-ray micro-diffraction (μ-SXRD)

The present study focuses on identification and micro-structural characterization of the hydration products formed in high-volume fly ash (HVFA)/portland cement (PC) systems using monochromatic scanning x-ray micro-diffraction (μ-SXRD) and SEM-EDS. Pastes with up to 80% fly ash replacement were studied. Phase maps for HVFA samples using μ-SXRD patterns prove that μ-SXRD is an effective method to identify and visualize the distribution of phases in the matrix. μ-SXRD and SEM-EDS analysis shows that the C-S-H formed in HVFA system containing 50% or more of fly ash has a similar structure as C-S-H(I) with comparatively lower Ca/Si ratio than the one produced in PC system. Moreover, coexistence of C-S-H(I) and strätlingite is observed in the system containing 80% of fly ash, confirming that the amount of alumina and silicate phases provided by the fly ash is a major factor for the formation of C-S-H(I) and strätlingite in HVFA system. - Highlights: • High-volume fly ash (HVFA) paste was studied by scanning x-ray micro-diffraction. • Coexistence of C-S-H(I) and strätlingite in the HVFA system is clearly shown. • The distribution of minor phases in the HVFA system is shown. • Differences between inner and outer products of fly ash are observed by SEM-EDS.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis of magnetite crystals: From sheet to pseudo-octahedron

In this paper, we developed a hydrothermal method to fabricate sheet-like and pseudo-octahedral magnetite crystals. X-ray diffraction (XRD) confirmed the products were pure spinel-structured magnetite. Scanning electron microscopy (SEM) was used to investigate the morphology of the obtained crystals. By carefully regulating the initial NaOH concentrations, the morphology of the products could be changed from sheet-like crystals to pseudo-octahedral crystals. Transmission electron microscopy (TEM) analysis indicated the sheet-like crystals were the oriented aggregation of nanoparticles. Pseudo-octahedral magnetite crystals were single crystalline, and were obtained by dissolution-recrystallization of the sheet-like crystals. Vibrating sample magnetometer (VSM)) suggested the magnetic properties of the products were strongly related to the morphology. The coercivity of the sheet-like magnetite crystals was 100 Oe, larger than 30 Oe of the pseudo-octahedral crystals, but the saturation magnetization of the sheet-like magnetite crystals was 40 emu/g, smaller than 85 emu/g of the pseudo-octahedral crystals.

36 MATERIALS SCIENCE↗

Electrodeposition of Zn based nanostructure thin films for photovoltaic applications

We present here a systematic study on the synthesis thin films of various ZnO, CdO, Zn{sub x}Cd{sub 1-x} (O) and ZnTe nanostructures by electrodeposition technique with ZnCl{sub 2,} CdCl{sub 2} and ZnSO{sub 4} solution as starting reactant. Several reaction parameters were examined to develop an optimal procedure for controlling the size, shape, and surface morphology of the nanostructure. The results showed that the morphology of the products can be carefully controlled through adjusting the concentration of the electrolyte. The products present well shaped Nanorods arrays at specific concentration and temperature. UV-VIS spectroscopy and X-ray diffraction results show that the product presents good crystallinity. A possible formation process has been proposed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

SLUDGE BATCH 7B GLASS VARIABILITY STUDY

The Defense Waste Processing Facility (DWPF) is preparing to initiate processing Sludge Batch 7b (SB7b). In support of the upcoming processing, the Savannah River National Laboratory (SRNL) provided a recommendation to utilize Frits 418 with a 6% Na{sub 2}O addition (26 wt% Na{sub 2}O in sludge) and 702 with a 4% Na{sub 2}O addition (24 wt% Na{sub 2}O in sludge) to process SB7b. This recommendation was based on assessments of the compositional projections for SB7b available at the time from the Savannah River Remediation (SRR). To support qualification of SB7b, SRNL executed a variability study to assess the applicability of the current durability models for SB7b. The durability models were assessed over the expected composition range of SB7b, including potential caustic additions, combined with Frits 702 and 418 over a 32-40% waste loading (WL) range. Thirty four glasses were selected based on Frits 418 and 702 coupled with the sludge projections with an additional 4-6% Na{sub 2}O to reflect the potential caustic addition. Six of these glasses, based on average nominal sludge compositions including the appropriate caustic addition, were developed for both Frit 418 and Frit 702 at 32, 36 and 40% WL to provide coverage in the center of the anticipated SB7b glass region. All glasses were fabricated and characterized using chemical composition analysis, X-ray diffraction (XRD) and the Product Consistency Test (PCT). To comply with the DWPF Glass Product Control Program, a total of thirty four glasses were fabricated to assess the applicability of the current DWPF PCCS durability models. Based on the measured PCT response, all of the glasses were acceptable with respect to the Environmental Assessment (EA) benchmark glass regardless of thermal history. The NL[B] values of the SB7b variability study glasses were less than 1.99 g/L as compared to 16.695 g/L for EA. A small number of the D-optimally selected 'outer layer' extreme vertices (EV) glasses were not predictable using the current Product Composition Control System (PCCS) models for durability, but were acceptable compared to the EA glass when tested. These glasses fell outside of the lower 95% confidence band, which demonstrates conservatism in the model. A few of the glasses fell outside of the upper 95% confidence band; however, these particular glasses have normalized release values that were much lower than the values of EA and should be of no practical concern. Per the requirements of the DWPF Glass Product Control Program, the PCCS durability models have been shown to be applicable to the SB7b sludge system with a range of Na{sub 2}O concentrations blended with Frits 418 or 702. PCT results from the glasses fabricated as part of the variability study were shown to be predictable by the current DWPF PCCS models and/or acceptable with respect to the EA benchmark glass regardless of thermal history or compositional view.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Synthesis of zeolite from Italian coal fly ash: Differences in crystallization temperature using seawater instead of distilled water

In this study Italian coal fly ash was converted into several types of zeolite in laboratory experiments with temperatures of crystallization ranging from 35 up to 90 deg. C. Distilled and seawater were used during the hydrothermal synthesis process in separate experiments, after a pre-treatment fusion with NaOH. The results indicate that zeolites could be formed from different kind of Italian coal fly ash at low temperature of crystallization using both distilled and seawater. SEM data and the powder patterns of X-ray diffraction analysis show that faujasite, zeolite ZK-5 and sodalite were synthesized when using both distilled and seawater; zeolite A crystallized only using distilled water. In particular the experiments indicate that the synthesis of zeolite X and zeolite ZK-5 takes place at lower temperatures when using seawater (35 and 45 deg. C, respectively). The formation of sodalite is always competitive with zeolite X which shows a metastable behaviour at higher temperatures (70-90 deg. C). The chemical composition of the fly ash source could be responsible of the differences on the starting time of synthesized zeolite with distilled water, in any case our data show that the formation of specific zeolites takes place always at lower temperatures when using seawater.

36 MATERIALS SCIENCE↗

MgO:Dy{sup 3+} nanophosphor: Self ignition route, characterization and its photoluminescence properties

For the first time series of MgO phosphors doped with different concentrations of Dy{sup 3+} (1–9 mol%) were prepared by solution combustion method using glycine as a fuel. The final products were well characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy and transmission electron microscopy. The powder X-ray diffraction patterns of the as-formed product show single cubic phase. The crystallite size estimated using Scherrer's method was found to be in the range 5–15 nm and the same was confirmed by transmission electron microscopy result. Photoluminescence properties of Dy{sup 3+} (1–9 mol%) doped MgO for near ultra violet excitation (325 nm) was studied in order to investigate the possibility of its use in white light emitting diode applications. The emission spectra consists of intra 4f transitions of Dy{sup 3+}, namely {sup 4}F{sub 9/2} → {sup 6}H{sub 15/2} (483 nm), and {sup 4}F{sub 9/2} → {sup 6}H{sub 13/2} (573 nm). Further, the emission at 573 nm shows strong yellow emission and can be applied to the yellow emission of phosphor for the application for near ultraviolet excitation. The intensity of yellow emission was attributed to intrinsic defects, especially oxygen-vacancies, which could assist the energy transfer from the MgO host to the Dy{sup 3+} ions. The Commission International De I-Eclairage chromaticity co-ordinates were calculated from emission spectra, the values (x,y) were very close to the National Television System Committee standard value of white emission. Therefore, the present phosphor was highly useful for display applications. - Graphical Abstract: PL emission spectra and CIE diagram of MgO:Dy{sup 3+} nanophosphor. - Highlights: • MgO:Dy{sup 3+} prepared by simple and low cost LCS method at low temperature (400 °C). • Characteristic emission peaks of Dy{sup 3+} ion at ∼ 483 and 573 nm are recorded. • CIE co-ordinate values located in the white region. • Present phosphor was quite useful for display applications.

36 MATERIALS SCIENCE↗

Leaching behaviour of bottom ash from RDF high-temperature gasification plants

This study investigated the physical properties, the chemical composition and the leaching behaviour of two bottom ash (BA) samples from two different refuse derived fuel high-temperature gasification plants, as a function of particle size. The X-ray diffraction patterns showed that the materials contained large amounts of glass. This aspect was also confirmed by the results of availability and ANC leaching tests. Chemical composition indicated that Fe, Mn, Cu and Cr were the most abundant metals, with a slight enrichment in the finest fractions. Suitability of samples for inert waste landfilling and reuse was evaluated through the leaching test EN 12457-2. In one sample the concentration of all metals was below the limit set by law, while limits were exceeded for Cu, Cr and Ni in the other sample, where the finest fraction showed to give the main contribution to leaching of Cu and Ni. Preliminary results of physical and geotechnical characterisation indicated the suitability of vitrified BA for reuse in the field of civil engineering. The possible application of a size separation pre-treatment in order to improve the chemical characteristics of the materials was also discussed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

RE/ZrO{sub 2} (RE = Sm, Eu) composite oxide nano-materials: Synthesis and applications in photocatalysis

Graphical abstract: - Highlights: • RE/ZrO{sub 2} (RE = Sm, Eu) nano-materials have been successfully synthesized. • Defect and electron structures determine the absorption properties on visible light. • Nano-sized Zr{sub 0.8}Sm{sub 0.2}O{sub 2−δ} has good visible-light-responsive photocatalytic activities. • In the future, it can be used in wastewater treatment and environmental protection. - Abstract: Zirconia modified by Samarium/Europium, RE/ZrO{sub 2} (RE = Sm, Eu), composite oxide nano-materials have been successfully synthesized by improved sol–gel method. Characterization results show that X-ray diffraction (XRD) peaks of products gradually shift to the lower angle with the increase of rare earth which implies that the lattice distances of RE/ZrO{sub 2} nano-materials are gradually enlarged. Moreover, the molar ratios between zirconium and rare earth are consistent with the chemical formula and both of them are uniformly distributed in samples. Optical properties indicate that defect structures and electron configurations of RE/ZrO{sub 2} (RE = Sm, Eu) with single phase determine their absorption properties on visible light. Photocatalytic experiments indicate Zr{sub 0.8}Sm{sub 0.2}O{sub 2−δ} nano-crystals have excellent visible-light-responsive photocatalytic activities on Methylene blue and Rhodamine B which results from the special defect structure, suitable electronic configuration, and larger specific surface area. It follows that Zr{sub 0.8}Sm{sub 0.2}O{sub 2−δ} nano-crystals are new visible-light-responsive photocatalysts which can be applied in dye wastewater treatment and environmental protection in the future.

36 MATERIALS SCIENCE↗

High Energy X-ray Applications for the Characterization of Metallic Uranium Alloys

Uranium-based metallic alloys are both candidates for fuels in high performance research and test reactors, as well as in fast spectrum reactors as nuclear transmutation fuels that can be utilized to burn long-lived minor actinides and fission products. Uranium-molybdenum (UMo) alloys are under development for the use in research and test reactors. Whereas, uranium-zirconium (U-Zr) alloys represent one of the types of fuels that are under consideration for use within the fast spectrum reactors. Both of these types of metallic fuels have been studied for over five decades in various types of reactors. Many of the previous studies had focused on performance-based aspects. However, recent advances in characterization tools and techniques, as well as short-term (low fluence) neutron irradiation facilities have contributed to a more in-depth understanding of nuclear fuel and material behavior following irradiation. This knowledge is crucial to the enhancement of current modeling and simulation techniques, particularly with respect to parameterization and validation. This paper focuses on the use of high energy x-rays to characterize metallic nuclear fuel. The specimens were composed of depleted uranium (DU) alloyed with either Zr or Mo, where DU-xZr (x = 10, 15, or 20 wt.%) and DU-yMo (y = 7 or 10 wt.%). The geometries of the specimens were 3 mm TEM disks that were ∼200 μm in thickness. The fuel alloys were initially prepared via an arc melting process. The samples were irradiated at the Advanced Test Reactor at Idaho National Laboratory (INL) using the hydraulic rabbit system. The hydraulic rabbit system allows for well-controlled, short term irradiations (less than one cycle), hence resulting in low fluences. The U-based alloys were irradiated to doses of 0.01 and 0.1 dpa. The irradiation temperature of the specimens ranged from 150 deg. C to 800 deg. C. Synchrotron characterization techniques can be used to provide insight into material microstructure ranging a multitude of spatial scales, from the atomic scale to the macroscale. High-energy x-rays at the National Synchrotron Light Source II (NSLS II) and the Advanced Photon Source (APS) have been utilized to understand the microstructural changes in these metallic alloys, specifically with respect to phase identification, phase fractions, chemical bonding, strain, and dislocation density through the use of diffraction and X-ray Absorption Spectroscopy (XAS). These experiments utilized a robot for specimen exchange during the diffraction measurements, allowing for remote handling of radioactive materials. This is an example of another recent advancement in characterization techniques that enables research with nuclear materials. Detailed results of the analyses of the microstructural changes are pending.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Saturation curve of SiO{sub 2} component in rutile-type GeO{sub 2}: A recoverable high-temperature pressure standard from 3 GPa to 10 GPa

The accuracy and precision of pressure measurements and the pursuit of reliable and readily available pressure scales at simultaneous high temperatures and pressures are still topics in development in high pressure research despite many years of work. In situ pressure scales based on x-ray diffraction are widely used but require x-ray access, which is lacking outside of x-ray beam lines. Other methods such as fixed points require several experiments to bracket a pressure calibration point. In this study, a recoverable high-temperature pressure gauge for pressures ranging from 3 GPa to 10 GPa is presented. The gauge is based on the pressure-dependent solubility of an SiO{sub 2} component in the rutile-structured phase of GeO{sub 2} (argutite), and is valid when the argutite solid solution coexists with coesite. The solid solution varies strongly in composition, mainly in pressure but also somewhat in temperature, and the compositional variations are easily detected by x-ray diffraction of the recovered products because of significant changes in the lattice parameters. The solid solution is measured here on two isotherms, one at 1200 °C and the other at 1500 °C, and is developed as a pressure gauge by calibrating it against three fixed points for each temperature and against the lattice parameter of MgO measured in situ at a total of three additional points. A somewhat detailed thermodynamic analysis is then presented that allows the pressure gauge to be used at other temperatures. This provides a way to accurately and reproducibly evaluate the pressure in high pressure experiments and applications in this pressure-temperature range, and could potentially be used as a benchmark to compare various other pressure scales under high temperature conditions. - Graphical abstract: The saturation curve of SiO{sub 2} in TiO{sub 2} shows a strong pressure dependence and a strong dependence of unit cell volume on composition. This provides an opportunity to use this saturation curve as a measurement of pressure during a high-pressure experiment. The curve is a sensitive measure of pressure from 3 GPa to 10 GPa at high temperatures. The pressure is derived from lattice parameter measurements on the recovered solid solution, meaning that in-situ measurements are not necessary to evaluate the pressure of the experiment. - Highlights: • The unit cell of a saturated GeO{sub 2}–SiO{sub 2} solid solution is used as a pressure sensor. • We measure nine bracketed pressure points on the GeO{sub 2}–SiO{sub 2} saturation surface. • We provide a pressure calibrant from 3 GPa to 10 GPa at two temperatures. • Four points are measured at 1200 °C and five points at 1500 °C. • A thermodynamic model is developed for use of the calibrant at other temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preliminary Compendium of the Initial Conditions and Evolution of the Fundamental Interactions of SiC with Ag and Pd

Tri-structural isotropic (TRISO) particles are the fuel of choice for very-high temperature reactors. At the core, these spherical particles consist of an inner fuel kernel of UO{sub 2}, UC{sub 2} or a combination of both, which is coated radially outward by successive layers of low density pyrolytic graphite, an inner high density pyrolytic graphite layer, silicon carbide (SiC) and an outer high density pyrolytic graphite layer. SiC is the main diffusion barrier against the release of fission products due to its hardness and high melting point. Irradiation testing of TRISO particles indicates that trace amounts of metallic fission products can damage or potentially escape through the barrier layer. Surrogate experimental studies have previously been performed by various methods seeking to shed light on and explain the diffusion behavior of Ag and Pd. Although some of these experiments have yielded realistic diffusion coefficients the discrepancy of results between different groups is such that the essential details of the diffusive behavior are still to be fully understood. This work aims to understand the fundamental physical and chemical interactions that take place at the interface of SiC and Ag/Pd, and which give rise to the observed diffusion behavior of these metallic species in TRISO particles. Theoretical simulations of the diffusion of Ag through SiC have been exhaustive but typically yield bulk diffusion coefficients that due to the nature of bulk diffusion phenomena (i.e. slow diffusion) the diffusion coefficients are calculated to be orders of magnitude lower than what experimental observations suggest. This in part is due to the difficulty in simulating realistic models that include various polymorphs of SiC, and the dynamical structural transformations that SiC undergoes in the TRISO environment (which are also to be explained). The result is a particularly challenging problem to solve given that the initial conditions of the interactions of Ag and Pd with SiC are difficult to address, both in theoretical models and surrogate experiments. In order to improve these models the approach taken here is to consider fundamental interactions between Ag and SiC that take place in short time scales by varying the initial environmental conditions, i.e. annealing temperature and time, initial amounts of the metallic species (M) Ag, Pd in SiC/M/SiC multilayers. This work aims to understand the fundamental physical and chemical interactions that take place at the interface of SiC and Ag/Pd, and which give rise to the observed diffusion behavior of these metallic species in TRISO particles. In order to do so we have synthesized SiC/Ag/SiC and SiC/Pd/SiC multilayers of various thicknesses by PLD and characterized them using SEM/EDS. Initial results show that upon annealing Ag agglomerates and ruptures the SiC layer to be released. In the case of Pd a strong chemical interaction is deduced from the slow interlayer diffusion and limited release. Further studies using photoelectron spectroscopy and RHEED will be carried out in order obtain detailed information on the chemical and physical transitions that undergo upon annealing of these systems. (authors)

36 MATERIALS SCIENCE↗

Promoting crystallisation of the Salmonella enteritidis fimbriae 14 pilin SefD using deuterium oxide

Highlights: Black-Right-Pointing-Pointer The benefits of D{sub 2}O in screening for crystallisation was explored. Black-Right-Pointing-Pointer The crystal structures of the SefD pilin in both H{sub 2}O and D{sub 2}O reveal differences. Black-Right-Pointing-Pointer Crystallisation improvements are explained by altered interactions in D{sub 2}O crystals. Black-Right-Pointing-Pointer D{sub 2}O is useful additive in sparse-matrix screening for crystallisation. -- Abstract: The use of heavy water (D{sub 2}O) as a solvent is commonplace in many spectroscopic techniques for the study of biological macromolecules. A significant deuterium isotope effect exists where hydrogen-bonding is important, such as in protein stability, dynamics and assembly. Here we illustrate the use of D{sub 2}O in additive screening for the production of reproducible diffraction-quality crystals for the Salmonella enteritidis fimbriae 14 (SEF14) putative tip adhesin, SefD.

60 APPLIED LIFE SCIENCES↗

PbO networks composed of single crystalline nanosheets synthesized by a facile chemical precipitation method

Graphical abstract: - Highlights: • Synthesis of PbO networks through a simple chemical precipitation route. • The synthesis method is rapid and low-cost. • Each network is composed of single crystalline PbO nanosheets. • A possible growth mechanism is proposed for synthesized PbO networks. - Abstract: For the field of energy storage, nanostructured lead oxide (PbO) shows immense potential for increased specific energy and deep discharge for lead acid battery technologies. In this work, PbO networks composed of single crystalline nanosheets were synthesized utilizing a simple, low cost and rapid chemical precipitation method. The PbO networks were prepared in a single reaction vessel from starting reagents of lead acetate dehydrate, ammonium hydroxide and deionized water. Lead acetate dehydrate was chosen as a reagent, as opposed to lead nitrate, to eliminate the possibility of nitrate contamination of the final product. X-ray diffraction (XRD) analysis, high resolution scanning electron microscopy (HRSEM) and high resolution transmission electron microscopy (HRTEM) analysis were used to characterize the synthesized PbO networks. The reproducible method described herein synthesized pure β-PbO (massicot) powders, with no byproducts. A possible formation mechanism for these PbO networks is proposed. The growth is found to proceed predominately in the 〈1 1 1〉 and 〈2 0 0〉 directions while being limited in the 〈0 1 1〉 direction.

36 MATERIALS SCIENCE↗

Quantifying the reaction mechanisms of a high-capacity CuP 2 /C composite anode for potassium ion batteries

Introducing metals into phosphorus to form metal phosphide materials as anodes for potassium ion batteries (PIBs) is an effective strategy to improve the electronic conductivity and alleviate the volume change during cycling, although with a compromise of capacity. Here in this paper, we explore a CuP 2 /C composite as a novel anode for PIBs, which delivers a high reversible capacity of >450 mA h g -1 . Unexpectedly, our results reveal that the POx components existing in the prepared composite are reversible, through a quantitative analysis via high-resolution solid-state 31 P NMR and synchrotron X-ray diffraction tests. Their potassiation products K 3 PO 4 and K 4 P 2 O 7 can react with K–P alloys and turn back to PO x during depotassiation, which probably accounts for the high capacity of the prepared material. The results also illustrate a crystallization–amorphization evolution process during cycling involving nanocrystalline α-K 4 P 6 , K 4 P 3 and KP, and amorphous K 4 P 6 , KP and K 3 P phases, among which, the amorphous phases are identified for the first time.

25 ENERGY STORAGE↗

Central Rapidity Gaps at CDF II

We present results from a study of central rapidity gap production in soft and hard diffractive events collected by CDF II.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Diffraction news from CDF

We report updated results by the CDF II collaboration on diffractive W and Z production and preliminary results from a study of rapidity gaps between very forward jets.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Techniques and tactics used in determining the structure of the trimeric ebolavirus glycoprotein

Here, the techniques, tactics and strategies used to overcome a series of technical roadblocks in crystallization and phasing of the trimeric ebolavirus glycoprotein are described. The trimeric membrane-anchored ebolavirus envelope glycoprotein (GP) is responsible for viral attachment, fusion and entry. Knowledge of its structure is important both for understanding ebolavirus entry and for the development of medical interventions. Crystal structures of viral glycoproteins, especially those in their metastable prefusion oligomeric states, can be difficult to achieve given the challenges in production, purification, crystallization and diffraction that are inherent in the heavily glycosylated flexible nature of these types of proteins. The crystal structure of ebolavirus GP in its trimeric prefusion conformation in complex with a human antibody derived from a survivor of the 1995 Kikwit outbreak has now been determined [Lee et al. (2008 ▶), Nature (London), 454, 177–182]. Here, the techniques, tactics and strategies used to overcome a series of technical roadblocks in crystallization and phasing are described. Glycoproteins were produced in human embryonic kidney 293T cells, which allowed rapid screening of constructs and expression of protein in milligram quantities. Complexes of GP with an antibody fragment (Fab) promoted crystallization and a series of deglycosylation strategies, including sugar mutants, enzymatic deglycosylation, insect-cell expression and glycan anabolic pathway inhibitors, were attempted to improve the weakly diffracting glycoprotein crystals. The signal-to-noise ratio of the search model for molecular replacement was improved by determining the structure of the uncomplexed Fab. Phase combination with Fab model phases and a selenium anomalous signal, followed by NCS-averaged density modification, resulted in a clear interpretable electron-density map. Model building was assisted by the use of B-value-sharpened electron-density maps and the proper sequence register was confirmed by building alternate sequences using N-linked glycan sites as anchors and secondary-structural predictions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗