Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Department of State”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Satellite Emission Range Inferred Earth Survey (SERIES) project

The Global Positioning System (GPS) was developed by the Department of Defense primarily for navigation use by the United States Armed Forces. The system will consist of a constellation of 18 operational Navigation Satellite Timing and Ranging (NAVSTAR) satellites by the late 1980's. During the last four years, the Satellite Emission Range Inferred Earth Surveying (SERIES) team at the Jet Propulsion Laboratory (JPL) has developed a novel receiver which is the heart of the SERIES geodetic system designed to use signals broadcast from the GPS. This receiver does not require knowledge of the exact code sequence being transmitted. In addition, when two SERIES receivers are used differentially to determine a baseline, few cm accuracies can be obtained. The initial engineering test phase has been completed for the SERIES Project. Baseline lengths, ranging from 150 meters to 171 kilometers, have been measured with 0.3 cm to 7 cm accuracies. This technology, which is sponsored by the NASA Geodynamics Program, has been developed at JPL to meet the challenge for high precision, cost-effective geodesy, and to complement the mobile Very Long Baseline Interferometry (VLBI) system for Earth surveying.

Buennagel, L. A.↗
NASA NTRS1991

Small satellite debris catalog maintenance issues

The United States Space Command (USSPACECOM) is a unified command of the Department of Defense, and one of its tasks is to detect, track, identify, and maintain a catalog of all man-made objects in Earth orbit. This task is called space surveillance, and the most important tool for space surveillance is the satellite catalog. The command's reasons for performing satellite catalog maintenance is presented. A satellite catalog is described, and small satellite-debris catalog-maintenance issues are identified. The underlying rationale is to describe the catalog maintenance services so that the members of the community can use them with assurance.

Jackson, Phoebe A.↗
NASA NTRS2001

Human Dimensions of Deforestation and Regrowth in the Brazilian Amazon: Integrating Data from Satellites, Demographic Censuses, and Field Surveys

This report summarizes research activities and products from a collaborative project on the "Human Dimensions of Deforestation and Regrowth in the Brazilian Amazon," awarded to Charles H. Wood (PI; Department of Sociology, University of Texas at Austin, now in the Center for Latin American Studies, University of Florida), Steven E. Sanderson (Co-PI; Department of Political Science, University of Florida, now Dean of Emory College, Emory University) and David L. Skole (Co-PI; Institute for Earth, Oceans and Space, University of New Hampshire, now in the Department of Geography and Basic Science Remote Sensing Initiative, Michigan State University).

Wood, Charles H.↗
NASA NTRS2005

Process Developed for Generating Ceramic Interconnects With Low Sintering Temperatures for Solid Oxide Fuel Cells

Solid oxide fuel cells (SOFCs) have been considered as premium future power generation devices because they have demonstrated high energy-conversion efficiency, high power density, and extremely low pollution, and have the flexibility of using hydrocarbon fuel. The Solid-State Energy Conversion Alliance (SECA) initiative, supported by the U.S. Department of Energy and private industries, is leading the development and commercialization of SOFCs for low-cost stationary and automotive markets. The targeted power density for the initiative is rather low, so that the SECA SOFC can be operated at a relatively low temperature (approx. 700 C) and inexpensive metallic interconnects can be utilized in the SOFC stack. As only NASA can, the agency is investigating SOFCs for aerospace applications. Considerable high power density is required for the applications. As a result, the NASA SOFC will be operated at a high temperature (approx. 900 C) and ceramic interconnects will be employed. Lanthanum chromite-based materials have emerged as a leading candidate for the ceramic interconnects. The interconnects are expected to co-sinter with zirconia electrolyte to mitigate the interface electric resistance and to simplify the processing procedure. Lanthanum chromites made by the traditional method are sintered at 1500 C or above. They react with zirconia electrolytes (which typically sinter between 1300 and 1400 C) at the sintering temperature of lanthanum chromites. It has been envisioned that lanthanum chromites with lower sintering temperatures can be co-fired with zirconia electrolyte. Nonstoichiometric lanthanum chromites can be sintered at lower temperatures, but they are unstable and react with zirconia electrolyte during co-sintering. NASA Glenn Research Center s Ceramics Branch investigated a glycine nitrate process to generate fine powder of the lanthanum-chromite-based materials. By simultaneously doping calcium on the lanthanum site, and cobalt and aluminum on the chromium site, we could sinter the materials below 1400 C. The doping concentrations were adjusted so that the thermal expansion coefficient matched that of the zirconia electrolyte. Also, the investigation was focused on stoichiometric compositions so that the materials would have better stability. Co-sintering and chemical compatibility with zirconia electrolyte were examined by X-ray diffraction, scanning electron microscopy, and energy dispersive spectroscopy (line scanning and dot map). The results showed that the materials bond well, but do not react, with zirconia electrolyte. The electric conductivity of the materials measured at 900 C in air was about 20 S/cm.

Zhong, Zhi-Min↗
NASA NTRS2009

Ikhana: Unmanned Aircraft System Western States Fire Missions. Monographs in Aerospace History, Number 44

In 2006, NASA Dryden Flight Research Center, Edwards, Calif., obtained a civil version of the General Atomics MQ-9 unmanned aircraft system and modified it for research purposes. Proposed missions included support of Earth science research, development of advanced aeronautical technology, and improving the utility of unmanned aerial systems in general. The project team named the aircraft Ikhana a Native American Choctaw word meaning intelligent, conscious, or aware in order to best represent NASA research goals. Building on experience with these and other unmanned aircraft, NASA scientists developed plans to use the Ikhana for a series of missions to map wildfires in the western United States and supply the resulting data to firefighters in near-real time. A team at NASA Ames Research Center, Mountain View, Calif., developed a multispectral scanner that was key to the success of what became known as the Western States Fire Missions. Carried out by team members from NASA, the U.S. Department of Agriculture Forest Service, National Interagency Fire Center, National Oceanic and Atmospheric Administration, Federal Aviation Administration, and General Atomics Aeronautical Systems Inc., these flights represented an historic achievement in the field of unmanned aircraft technology.

Western States fire missions↗
NASA NTRS2004

Solid oxidized fuel cells seals leakage setup and testing

As the world s reserves of fossil fuels are depleted, the U.S. Government, as well as other countries and private industries, is researching solutions for obtaining power, answers that would be more efficient and environmentally friendly. For a long time engineers have been trying to obtain the benefits of clean electric power without heavy batteries or pollution-producing engines. While some of the inventions proved to be effective (i.e. solar panels or windmills) their applications are limited due to dependency on the energy source (i.e. sun or wind). Currently, as energy concerns increase, research is being carried out on the development of a Solid Oxide Fuel Cell (SOFC). The United States government is taking a proactive role in expanding the technology through the Solid State Energy Conversion Alliance (SECA) Program, which is coordinated by the Department of Energy. into an electrical energy. This occurs by the means of natural tendency of oxygen and hydrogen to chemically react. While controlling the process, it is possible to harvest the energy given off by the reaction. SOFCs use currently available fossil fuels and convert a variety of those fuels with very high efficiency (about 40% more efficient than modem thermal power plants). At the same time they are almost entirely nonpolluting and due to their size they can be placed in remote areas. The main fields where the application of the fuel cells appears to be the most useful for are stationary energy sources, transportation, and military applications. structure and materials must be resolved. All the components must be operational in harsh environments including temperatures reaching 800 C and cyclic thermal- mechanical loading. Under these conditions, the main concern is the requirement for hermetic seals to: (1) prevent mixing of the fuel and oxidant within the stack, (2) prevent parasitic leakage of the fuel from the stack, (3) prevent contamination of the anode by air leaking into the stack, (4) electrically isolate the individual cells within the stack, and (5) mechanically bond the cell components. The sealing challenges are aggravated by the need to maintain hermetic boundaries between the different flow paths within the fuel cell throughout cycled operation. Within the timeframe of my tenure, the main objective is to assist in building a state-of-art test facility.

Bastrzyk, Marta B.↗
NASA NTRS2006

How Well do State-of-the-Art Techniques Measuring the Vertical Profile of Tropospheric Aerosol Extinction Compare?

The recent Department of Energy Atmospheric Radiation Measurement (ARM) Aerosol Intensive Operations Period (AIOP, May 2003) yielded one of the best measurement sets obtained to date to assess our ability to measure the vertical profile of ambient aerosol extinction sigma(ep)(lambda) in the lower troposphere. During one month, a heavily instrumented aircraft with well-characterized aerosol sampling ability carrying well-proven and new aerosol instrumentation devoted most of the 60 available flight hours to flying vertical profiles over the heavily instrumented ARM Southern Great Plains (SGP) Climate Research Facility (CRF). This allowed us to compare vertical extinction profiles obtained from six different instruments: airborne Sun photometer (AATS-14), airborne nephelometer/absorption photometer, airborne cavity ring-down system, groundbased Raman lidar, and two ground-based elastic backscatter lidars. We find the in situ measured sigma(ep)(lambda) to be lower than the AATS-14 derived values. Bias differences are 0.002-0.004 Km!1 equivalent to 13-17% in the visible, or 45% in the near-infrared. On the other hand, we find that with respect to AATS-14, the lidar sigma(ep)(lambda) are higher: Bias differences are 0.004 Km(-1) (13%) and 0.007 Km(-1) (24%) for the two elastic backscatter lidars (MPLNET and MPLARM, lambda = 523 nm) and 0.029 Km(-1) (54%) for the Raman lidar (lambda = 355 nm). An unnoticed loss of sensitivity of the Raman lidar had occurred leading up to AIOP, and we expect better agreement from the recently restored system. Looking at the collective results from six field campaigns conducted since 1996, airborne in situ measurements of sigma(ep)(lambda) tend to be biased slightly low (17% at visible wavelengths) when compared to airborne Sun photometer sigma(ep)(lambda). On the other hand, sigma(ep)(lambda) values derived from lidars tend to have no or positive biases. From the bias differences we conclude that the typical systematic error associated with measuring the tropospheric vertical profile of the ambient aerosol extinction with current state-of-the-art instrumentation is 15-20% at visible wavelengths and potentially larger in the UV and near-infrared.

Schmid, B.↗
NASA NTRS1989

The AMSC mobile satellite system: Design summary and comparative analysis

Mobile satellite communications will be provided in the United States by the American Mobile Satellite Consortium (AMSC). Telesat Mobile, Inc. (TMI) and AMSC are jointly developing MSAT, the first regional Mobile Satellite Service (MSS) system. MSAT will provide diverse mobile communications services - including voice, data and position location - to mobiles on land, water, and in the air throughout North America. Described here are the institutional relationships between AMSC, TMI and other organizations participating in MSAT, including the Canadian Department of Communications and NASA. The regulatory status of MSAT in the United States and international allocations to MSS are reviewed. The baseline design is described.

Noreen, Gary K.↗
NASA NTRS1972

ERISTAR: Earth Resources Information Storage, Transformation, Analysis, and Retrieval

The National Aeronautics and Space Administration (NASA) and the American Society for Engineering Education (ASEE) have sponsored faculty fellowship programs in systems engineering design for the past several years. During the summer of 1972 four such programs were conducted by NASA, with Auburn University cooperating with Marshall Space Flight Center (MSFC). The subject for the Auburn-MSFC design group was ERISTAR, an acronym for Earth Resources Information Storage, Transformation, Analysis and Retrieval, which represents an earth resources information management network of state information centers administered by the respective states and linked to federally administered regional centers and a national center. The considerations for serving the users and the considerations that must be given to processing data from a variety of sources are described. The combination of these elements into a national network is discussed and an implementation plan is proposed for a prototype state information center. The compatibility of the proposed plan with the Department of Interior plan, RALI, is indicated.

Source record↗
NASA NTRS1974

LTA in the USA - Here's where it stands today

Lighter than air (LTA) vehicles were the first aircraft to fly and, until the disasters of the 1930s, were thought by many to be the primary mode of air transport. The history of LTA in the United States is briefly traced and the reasons for the current revival in interest are discussed. The focal point for this revival was the LTA Workshop hosted by M.I.T. under the joint sponsorship of the United States National Aeronautics and Space Administration, Navy, Federal Aviation Administration and Department of Transportation. The Workshop and its results are discussed in detail.

Vittek, J. F., Jr.↗
NASA NTRS1981

Implementing automatic geographic referencing in Utah

Efforts to use a fully integrated approach to remote sensing in Utah include a realization that data and information are also resources to be managed. A possibility that information acquired for a specific use such as geological application may be of use to others, for instance, to the highway department. Utah is trying to establish a core operation within the state to make some upfront investment in hardware, software, and technical expertise, sufficient to make the operational people in the field aware of what can be done. The key to the operation is to facilitate, coordinate, and educate, so agencies can act for themselves based on their needs, desires, capabilities, and budget.

Plott, B. L.↗
NASA NTRS1982

A Landsat-based inventory procedure for agriculture in California

Agriculture, which occupies a vital position in the economy of the State of California, depends crucially on the available water. The California Department of Water Resources (DWR) is, therefore, greatly concerned with the total water requirements for agricultural applications. In view of the limitations of an area-limited, single-date survey system, the DWR has been cooperating with NASA and the University of California in a study of the applicability of Landsat imagery and digital data as an aid in making decisions concerning the management of water resources. Attention is given to a statewide inventory of irrigated land, computer-assisted estimation and mapping of irrigated land, and a crop type analysis using Landsat digital data.

Wall, S. L.↗
NASA NTRS1921

Data on the Design of Plywood for Aircraft

This report makes available data which will aid the designer in determining the plywood that is best adapted to various aircraft parts. It gives the results of investigations made by the Forest Products Laboratory of the United States Forest Service at Madison, Wisconsin, for the Army and Navy Departments, and is one of a series of reports on the use of wood in aircraft prepared by the Forest Products Laboratory for publication by the National Advisory Committee for Aeronautics. The object of the study was to determine, through comprehensive tests, the mechanical and physical properties of plywood and how these properties vary with density, number, thickness, arrangement of the plies and direction of grain of the plies.

Elmendorf, Armin↗
NASA NTRS1982

Turbine Blade Research

Under contract with the New York State Energy Research and Development Authority, GE's Energy Systems Programs Department used a COSMIC program in assessing the problem of blade erosion in a PFB (pressurized fluid bed) environment. Data provided by this program and an associated program enabled the company engineers to determine gas velocities and the velocities of the particles striking the blades, calculations necessary for predicting blade erosion and potential damage. The assessment resulted in a new estimate for the allowable dust load for a modern heavy duty gas turbine.

Source record↗
NASA NTRS1966

Summary of NACA/NASA Variable-Sweep Research and Development Leading to the F-111 (TFX)

On November 24, 1962, the United States ushered in a new era of aircraft development when the Department of Defense placed an initial development contract for the world's first supersonic variable-sweep aircraft - the F-111 or so-called TFX (tactical fighter-experimental). The multimission performance potential of this concept is made possible by virtue of the variable-sweep wing - a research development of the NASA and its predecessor, the NACA. With the wing swept forward into the maximum span position, the aircraft configuration is ideal for efficient subsonic flight. This provides long-range combat and ferry mission capability, short-field landing and take-off characteristics, and compatibility with naval aircraft carrier operation. With the wing swept back to about 650 of sweep, the aircraft has optimum supersonic performance to accomplish high-altitude supersonic bombing or interceptor missions. With the wing folded still further back, the aircraft provides low drag and low gust loads during supersonic flight "on the deck" (altitudes under 1000 feet). The concept of wing variable sweep, of course, is not new. Initial studies were conducted at Langley as early as 1945, and two subsonic variable-sweep prototypes (Bell X-5 and Grumman XF-IOF) were flown as early as 1951/52. These were subsonic aircraft, however, and the great advantage of variable sweep in improving supersonic flight efficiency could not be realized. Further~ the structures of these early aircraft were complicated by the necessity for translating the ~ing fore and aft to achieve satisfactory longitUdinal stability as the wing sweep was varied. Late in 1958 a research breakthrough at Langley provided the technology for designing a variable-sweep wing having satisfactory stability through a wide sweep angle range without the necessity for fore and aft translation of the wing. In this same period there evolved within the military services an urgent requirement for a versatile fighter-bomber that could fly efficiently at subsonic and supersonic speeds at high altitude and "on the deck". The application of variable sweep to this mission requirement then became obvious.

Source record↗
NASA NTRS2022

Shoshone River Water Resources: Assessing Sediment Inputs into the Shoshone River in Wyoming to Determine Areas for Protection and Restoration Practices

In 2016, a routine repair operation at the Willwood Dam released tons of built-up sediment into the Shoshone River, polluting the river and negatively impacting the ecosystem. This release greatly affected the communities that rely on the river for farming, recreation, and tourism. In partnership with the Wyoming Department of Environmental Quality (WYDEQ), Shoshone River Partners, and the United States Geological Survey (USGS) Wyoming–Montana Water Science Center, this project utilized satellite imagery and precipitation data to examine turbidity patterns in the Shoshone River between the Buffalo Bill Dam and the Willwood Dam. We used PlanetScope satellite images to assess changes in surface reflectance of the river in response to precipitation events and Global Precipitation Measurement (GPM) Integrated Multi-Spectral Retrieval (IMERG) precipitation data to estimate the lag time between rainfall events and increased turbidity. The National Land Cover Dataset (2019) was used to identify the main land cover types within each sub-basin. The end products included a turbidity analysis, land cover analysis, and precipitation analysis that provided the partners with a better understanding of sediment dynamics in the river. The results demonstrated the feasibility of using PlanetScope data to examine turbidity spatially along small rivers. Sediment plumes from tributaries were visually identified for multiple high turbidity events, and we calibrated an equation that translated reflectance to turbidity, accurately representing plume extent. Inconsistent spectral quality of PlanetScope data, however, limited our ability to assess the relative sediment contribution of the tributaries.

tributaries↗
NASA NTRSDate not supplied

Assessing Sediment Inputs into the Shoshone River in Wyoming to Determine Areas for Protection and Restoration Practices

In 2016, a routine repair operation at the Willwood Dam released tons of built-up sediment into the Shoshone River, polluting the river and killing thousands of fish. This release greatly concerned the communities that rely on the river for farming, recreation, and tourism. In partnership with the Wyoming Department of Environmental Quality (WDEQ), Shoshone River Partners, and the United States Geological Survey (USGS) Wyoming-Montana Water Science Center, this multipart project illustrated the application of high-resolution satellite imagery and hydrological modeling techniques to identify major tributaries contributing to sediment influxes into the Shoshone River between the Buffalo Bill Dam and the Willwood Dam. The team used PlanetScope and Sentinel-2 Multi-Spectral Instrument (MSI) satellite images to assess changes in the surface reflectance of the river in response to precipitation events. To determine these storm events, the team selected dates of interest using Global Precipitation Measurement (GPM) Integrated Multi-Spectral Retrieval (IMERG) and gauge precipitation data from the Global Historical Climatology Network Daily (GHCNd). The continuation of this research further quantified sediment influx in the Shoshone River following snowfall and melt events using the Soil & Water Assessment Tool (SWAT). The precipitation analysis and sediment contribution maps helped the partner organizations prioritize their current decision making and best management practices to specific sites along the river. The results demonstrated the feasibility of using PlanetScope data for categorizing sediment in the Shoshone River.

Caroline Williams↗
NASA NTRS1993

Oceanic transform earthquakes with unusual mechanisms or locations - Relation to fault geometry and state of stress in the adjacent lithosphere

Results are presented of a search for transform earthquakes departing from the pattern whereby they occur on the principal transform displacement zone (PTDZ) and have strike-slip mechanisms consistent with transform-parallel motion. The search was conducted on the basis of source mechanisms and locations taken from the Harvard centroid moment tensor catalog and the bulletin of the International Seismological Center. The source mechanisms and centroid depths of 10 such earthquakes on the St. Paul's, Marathon, Owen, Heezen, Tharp, Menard, and Rivera transforms are determined from inversions of long-period body waveforms. Much of the anomalous earthquake activity on oceanic transforms is associated with complexities in the geometry of the PTDZ or the presence of large structural features that may influence slip on the fault.

Wolfe, Cecily J.↗