Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Density Laws”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

X-ray nebular models

Theoretical models are presented for the temperature and ionization structure of spherically symmetric, constant density, gaseous nebulae surrounding compact X-ray sources and for the optical, UV, and X-ray spectra emerging from the nebulae. The structure is determined by assuming a local balance between heating and cooling in the gas, and the radiation field is found by solving a simplified equation of transfer. The calculations include an accurate and comprehensive treatment of the atomic processes affecting the state of the gas and the radiation field. The destruction of line radiation during resonance scattering causes models to be significantly hotter and more highly ionized than previous models of the same type. Model results are presented for a wide variety of gas densities and X-ray source spectra, scaling laws which allow these results to be generalized to a wide variety of astrophysical solutions are discussed, and column densities of multiply charged species are tabulated.

Kallman, T. R.↗
NASA NTRS2014

Use of 2d-video Disdrometer to Derive Mean Density-size and Ze-SR Relations: Four Snow Cases from the Light Precipitation Validation Experiment

The application of the 2D-video disdrometer to measure fall speed and snow size distribution and to derive liquid equivalent snow rate, mean density-size and reflectivity-snow rate power law is described. Inversion of the methodology proposed by Böhm provides the pathway to use measured fall speed, area ratio and '3D' size measurement to estimate the mass of each particle. Four snow cases from the Light Precipitation Validation Experiment are analyzed with supporting data from other instruments such as Precipitation Occurrence Sensor System (POSS), Snow Video Imager (SVI), a network of seven snow gauges and three scanning C9 band radars. The radar-based snow accumulations using the 2DVD-derived Ze-SR relation are in good agreement with a network of seven snow gauges and outperform the accumulations derived from a climatological Ze-SR relation used by the Finnish Meteorological Institute (FMI). The normalized bias between radar-derived and gauge accumulation is reduced from 96% when using the fixed FMI relation to 28% when using the Ze-SR relations based on 2DVD data. The normalized standard error is also reduced significantly from 66% to 31%. For two of the days with widely different coefficients of the Ze-SR power law, the reflectivity structure showed significant differences in spatial variability. Liquid water path estimates from radiometric data also showed significant differences between the two cases. Examination of SVI particle images at the measurement site corroborated these differences in terms of unrimed versus rimed snow particles. The findings reported herein support the application of Böhm's methodology for deriving the mean density-size and Ze-SR power laws using data from 2D-video disdrometer.

radar↗
NASA NTRS1979

Millimetre and submillimetre measurements of the Crab Nebula

The flux from the central region of the Crab Nebula in three broad spectral passbounds with flux-weighted mean wavelengths of 300 microns, 400 microns and 1 mm has been measured. The inferred total flux densities for the entire nebula are consistent with an extrapolation of the power law spectrum found at longer wavelengths. Derivations of various flux densities are presented, and it is concluded that the luminosity of dust emission from the Crab Nebula varies between 1300 and 5000 suns as the temperature varies from 40 to 120 K, respectively.

Wright, E. L.↗
DOE OSTI2022

FSISPH: An SPH formulation for impacts between dissimilar materials

Here, we present an SPH formulation with several new features designed to better model the fully-compressible interaction of dissimilar materials. We developed the new method to simulate the atmospheric entry and break-up of small celestial bodies in planetary atmospheres. The formulation uses a unity-based, density-energy discretization of the hydrodynamic conservation laws with linear-corrected kernel gradients. To account for variations in compressibility, we use an HLLC approximate Riemann solver to adjust the velocity gradient at material interfaces. To handle large transverse velocity discontinuities, we introduce a simple slip interface model that limits the artificial viscosity at material interfaces. Diffusion is optionally applied through the velocity gradient and this allows the density and specific thermal energy to evolve in a manner more consistent with the first law of thermodynamics in comparison to other more direct diffusion schemes. We also introduce a material-local second-order artificial conduction scheme used to smooth the specific thermal energy field. Material damage fits neatly under this framework by treating the damage front as a material interface. The method has been implemented as a solver, FSISPH, within the code, Spheral++, and is publicly available on github. We test our new solver on a number of classic shock, mixing, and multi-material problem. The components we outline can significantly improve accuracy of SPH for problems with sharp contact discontinuities.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1979

Comparison of projected critical currents in PbMo6S8 and Nb3Ge

Critical current densities, Jc, of sputtered Chevrel phase PbMo6S8 films have been measured as a function of field to 19 T at several temperatures. The pinning forces were found to obey a scaling law. Assuming an effective upper critical field Bc2 = 45 T, an effective critical temperature Tc = 13 K, together with empirical estimates of numerical factors in the scaling law, the upper limits for critical current density Jc in PbMo6S8 are estimated. Comparisons are made with estimates of Jc for Nb3Ge at 4.2 K. A crossover of Jc vs. B is found for B of the order of 25 to 30 T. Below this point, Nb3Ge is projected to have a higher critical current density. Thus practical use of Chevrel materials in high field magnets only appears to be competitive with Nb3Ge for fields above 25 to 30 T.

Alterovitz, S. A.↗
NASA NTRS1991

Optical polarization of a complete sample of radio sources

The radio and optical properties of a complete 5 GHz sample of strong radio sources are studied. High polarization is strongly correlated with the fraction of the total 5 GHz flux density found in a milliarcsec core. The detection rate of radio galaxies containing optical cores with high polarization is consistent with the hypothesis that all radio sources contain optically polarized cores, with strength proportional to the core radio flux density. High optical polarization, optical power-law fraction, line-to-continuum ratio, emission lines of small equivalent widths, and large amplitude flux variability are all strongly correlated with the fraction of the 5 GHz radio flux density that is unresolved on VLBI scales. The distributions of these properties are well matched by a model where radio and optical radiation have the same beaming geometry and with Doppler boosting of a factor of 10-100 in the optical. A striking alignment of the position angle of the VLBI structure axis and the position angle of optical polarization in highly polarized sources is confirmed.

Impey, C. D.↗
NASA NTRS1989

The distribution of solar magnetic fluxes and the nonlinearity of stellar flux-flux relations

Synoptic maps for the 1975-1984 period are used to determine the time-dependent distribution function of magnetic flux densities in the solar atmosphere. The distribution function depends only on the global level of magnetic activity, and it is used to study how relations between magnetic flux densities and radiative flux densities from different temperature regimes in the outer atmosphere (derived from spatially resolved solar observations) transform into relations between surface-averaged flux densities. It is found that the transformation to surface-averaged fluxes preserves the power-law character of relations between radiative and magnetic flux densities for spatially resolved data.

Schrijver, C. J.↗
NASA NTRS1992

Microburst modelling and scaling

A microburst can be modeled by releasing a volume of fluid that is slightly heavier than the ambient fluid, allowing it to fall onto a horizontal surface. Vorticity develops on the sides of this parcel as it descends and causes it to roll up into a turbulent vortex ring which impinges on the ground. Such a model exhibits many of the features of naturally occurring microbursts which are a hazard to aviation. In this paper this model is achieved experimentally by releasing a volume of salt water into fresh water from a cylindrical dispenser. When care is taken with the release the spreading rate of the surface outflow is measurable and quite repeatable despite the fact that the flow is turbulent. An elementary numerical approximation to this model, based on inviscid vortex dynamics, has also been developed. A scaling law is proposed which allows experiments with different fluid densities to be compared with each other and with the numerical results. More importantly the scaling law makes it possible to compare the model results with real microbursts.

Lundgren, T. S.↗
NASA NTRS1994

Optical studies of interstellar material in low density regions of the Galaxy

We analyze high-resolution Na I and Ca II interstellar absorption line data obtained in an earlier spectroscopic survey of 57 stars along extended sight lines through the Galactic disk and halo. We find that the Na I lines trace a diffuse cloudy medium and the CA II lines trace both the cloudy medium and a more extended (intercloud) medium. High latitude and interarm sight lines that do not cross spiral arms have clouds that are more diffuse on average than those along sight lines that cross spiral arms. Spiral structure may play an important role in determinating the average absorption properties along extended sight lines and/or interesting physical differences may exist between sight lines that cross spiral arms and those that do not. These might include a harder radiation field and/or higher electron tempertures along the high latitude and 'clean' interarm sight lines. On average, 10% of the Ca II column density occurs at velocities forbidden by the Galactic rotation law by more than 10 km/s. In contrast, only a small precentage of the Na I column density occurs at these velocites. The Ca II to Na I ratio increases by a factor of 15 over forbidden velocities from 0 to 50 km/s and rises rapidly thereafter. A two component model of the Ca II column density per unit velocity over the range l = 325 deg to 360 deg indicates that two distinct distributions exists, one with sigma = 8 km/s and one with sigma = 21 km/s. As much as 60% of the Ca II column density at forbidden velocities may be associated with the faster distribution, which we attribute to warm intercloud material. We estimate expontential scale heights of 0.4-0.5 kpc for the neutral gas traced by the E(B-V), Na I, and H I distributions along the low density sight lines, and we find that Ca II has a larger scale height of 0.8 kpc.

Sembach, K. R.↗
NASA NTRS1993

The distribution of interstellar dust in the solar neighborhood

We surveyed the IRAS data base at the positions of the 1808 O6-B9.5 stars in The Bright Star Catalog for extended objects with excess emission at 60 microns, indicating the presence of interstellar dust at the location of the star. Within 400 pc the filling factor of the interstellar medium, for dust clouds with a density greater than 0.5/cu cm is 14.6 + or - 2.4%. Above a density of 1.0/cu cm, the density distribution function appears to follow a power law index - 1.25. When the dust clouds are mapped onto the galactic plane, the sun appears to be located in a low-density region of the interstellar medium of width about 60 pc extending at least 500 pc in the direction of longitudes 80 deg - 260 deg, a feature we call the 'local trough'.

Gaustad, John E.↗
NASA NTRS1976

The irregularity spectrum in interstellar space

Published data on the interstellar scintillations of three pulsars are analyzed using a theory based on the Markov approximation for strong scintillations. The data are found to be consistent with either a Gaussian or Kolmogorov-like power-law irregularity spectrum for the interstellar material. For two of the pulsars, application of the Kolmogorov power law suggests the presence of regions of larger than normal electron density between us and the pulsar. The parameters of the deduced power-law spectrum are considered with independent measures of the large-scale structures of the gas and indicate the possibility of a broadly turbulent interstellar medium with a Kolmogorov-like spectrum.

Lee, L. C.↗
NASA NTRS2009

Optimization of Layer Densities for Spacecraft Multilayered Insulation Systems

Numerous tests of various multilayer insulation systems have indicated that there are optimal densities for these systems. However, the only method of calculating this optimal density was by a complex physics based algorithm developed by McIntosh. In the 1970's much data were collected on the performance of these insulation systems with many different variables analyzed. All formulas generated included number of layers and layer density as geometric variables in solving for the heat flux, none of them was in a differentiable form for a single geometric variable. It was recently discovered that by converting the equations from heat flux to thermal conductivity using Fourier's Law, the equations became functions of layer density, temperatures, and material properties only. The thickness and number of layers of the blanket were merged into a layer density. These equations were then differentiated with respect to layer density. By setting the first derivative equal to zero, and solving for the layer density, the critical layer density was determined. Taking a second derivative showed that the critical layer density is a minimum in the function and thus the optimum density for minimal heat leak, this is confirmed by plotting the original function. This method was checked and validated using test data from the Multipurpose Hydrogen Testbed which was designed using McIntosh's algorithm.

Johnson, W. L.↗
DOE OSTI2025

Emergent Above-Gap Photoluminescence in Molecularly Engineered Hybrid Bilayer Crystals

Bilayer crystals, built by stacking two-dimensional (2D) covalent monolayers, give rise to coupled excitonic states whose properties are constrained by fixed lattice symmetry and orientation. Replacing one covalent monolayer with a 2D molecular crystal––held together by non-covalent forces––overcomes this limitation, as molecular functional groups afford tunable in-plane lattice geometry, intermolecular spacing, and interlayer coupling, providing a powerful knob for exciton engineering. Here, in this study, we report four-atom-thick hybrid bilayer crystals (HBCs) synthesized by directly growing single-crystalline PDI molecular crystal atop WS 2 monolayers, which exhibit a robust photoluminescence (PL) peak 120 meV above the WS 2 optical band gap alongside a belowgap emission. Both peaks display strong polarization anisotropy—nearing unity for the above-gap emission—and maintain a perfectly linear power-law dependence up to an excitation density of ~10 7 mW/cm 2 , indicative of coexisting localized and delocalized excitonic states. Substituting PDI with a PTCDA monolayer on WS 2 fully quenches PL, demonstrating molecular control over excitonic emission. Lattice scale ab initio GW and GW-BSE calculations reveal a significantly hybridized bilayer band structure in PDI/WS 2 that supports interlayer excitonic species both above and below the WS 2 gap with strong polarization anisotropy, in excellent agreement with experiment. Our work introduces a molecule-based bilayer platform for the bottom-up design and control of excitonic phenomena in atomically thin optoelectronic and quantum materials.

2D materials↗
DOE OSTI2026

Observation of Transition from Rate Law to Butler–Volmer Controlled Water Oxidation Kinetics on Hematite Photoanodes

Despite its central role in photoelectrochemical (PEC) water splitting, the mechanistic pathway of water oxidation on metal oxides remains unresolved, with population-based and Butler–Volmer (BV) models offering distinct views on how surface valence band holes drive the reaction. Here, we bring together these two perspectives by combining operando photoinduced absorption (PIA) spectroscopy with photocurrent analyses on α-Fe 2 O 3 (hematite) photoanodes as a function of light intensity. We find a crossover from population-controlled, rate law water oxidation at low hole densities to a BV-like, potential driven regime at high densities, triggered by band edge unpinning once surface M–OH species are fully oxidized, and excess holes accumulate without compensation. This mechanistic transition unifies competing models of interfacial charge transfer and reveals design principles for optimizing water oxidation in metal oxide photoelectrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Calculation of permanent magnet arrangements for stellarators: a linear least-squares method

A problem arising in several engineering areas is to design magnets outside a volume that produce a desired magnetic field inside it. One instance of this problem is stellarator design, where it has recently been shown that permanent magnets can provide the required shaping of the magnetic field. Here we demonstrate a robust and efficient algorithm REGCOIL_PM to calculate the spatial distribution of these permanent magnets. The procedure involves a small number of fixed-point iterations, with a linear least-squares problem solved at each step. Furthermore, the method exploits the Biot–Savart Law's exact linearity in magnetization density and approximate linearity in magnet size, for magnets far from the target region. No constraint is placed on the direction of magnetization, so Halbach solutions are found naturally, and the magnitude of the magnetization can be made uniformly equal to a target value.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Disorder recovers the Wiedemann-Franz law in the metallic phase of VO 2

At temperatures higher than 341 K, vanadium dioxide (VO 2 ) is a strongly correlated metal with resistivity exceeding the Mott-Ioffe-Regel limit. Its electronic thermal conductivity is lower than that predicted by the Wiedemann-Franz (WF) law, and can be explained by nonquasiparticle transport where heat and charge currents follow separate diffusive modes. In contradiction, the Wiedemann-Franz law is a direct consequence of quasiparticle transport where charge carriers are elastically scattered. In this work, we enhance elastic electron scattering in VO 2 by introducing atomic disorder with ion irradiation. Furthermore, a gradual and eventually full recovery of the WF law is observed at high defect densities. This observation provides an example that connects hydrodynamic quasiparticle transport to nonquasiparticle transport in metallic systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Hydrodynamic theory of scrambling in chaotic long-range interacting systems

The Fisher-Kolmogorov-Petrovsky-Piskunov (FKPP) equation provides a mean-field theory of out-of-time-ordered commutators in locally interacting quantum chaotic systems at high energy density. In systems with power-law interactions, the corresponding fractional-derivative FKPP equation provides an analogous mean-field theory. However, the fractional FKPP description is potentially subject to strong quantum fluctuation effects, so it is not clear a priori if it provides a suitable effective description for generic chaotic systems with power-law interactions. Here, in this work, we study this problem using a model of coupled quantum dots with interactions decaying as 1/r α , where each dot hosts N degrees of freedom. The large-N limit corresponds to the mean-field description, while quantum fluctuations contributing to the OTOC can be modeled by 1/N corrections consisting of a cutoff function and noise. Within this framework, we show that the parameters of the effective theory can be chosen to reproduce the butterfly light cone scalings previously found for N=1 and generic finite N. In order to reproduce these scalings, the fractional index μ in the FKPP equation needs to be shifted from the naïve value of μ=2⁢α–1 to a renormalized value μ=2⁢α–2. We provide supporting analytic evidence for the cutoff model and numerical confirmation for the full fractional FKPP equation with cutoff and noise.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗