Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dehydrogenation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Fabrication and Characterization of Iron-Based Catalysts for the Dehydrogenation of Fossil Fuels

For a prosperous and sustainable future, hydrogen is an encouraging solution due to its simple transition for industrial decarbonization and synergy for economic development. Paradoxically, current hydrogen production pathways release substantial amount of greenhouse gases into the atmosphere contributing to climate change. To keep up with increasing demand, hydrogen could be produced through microwave-assisted thermocatalytic dehydrogenation of fossil fuels without emitting carbon dioxide. This requires specified catalysts to meet the requirements of hydrogen yield and selectivity. The objective of the present research is to fabricate, characterize, and compare iron-based alumina (FeAlxOy) catalysts produced via solution combustion synthesis and iron-based catalysts on silicon carbide support (Fe/SiC) produced via incipient wetness impregnation. Heat mode, fuel type, and oxidizer mole ratio were varied for FeAlxOy catalysts, and metal loading was varied for Fe/SiC catalysts. Each resultant product was characterized by X-ray diffraction analysis, scanning electron microscopy, laser diffraction particle size analysis, and Brunauer-Emmett-Teller (BET) surface area analysis. Characterization suggests that fabrication of iron-based alumina nanocomposites through solution combustion synthesis in a muffle furnace using citric acid as the fuel yields the most promising catalyst.

Reyes, Victoria Isabel↗
DOE OSTI2023

Elucidation of puzzling questions regarding the CrO x /Al 2 O 3 catalyst I. X-ray absorption spectroscopy aided identification of the nature of the chromium oxide species in the CrO x /Al 2 O 3 dehydrogenation catalyst system

The CATOFIN© process produces propylene from propane using a CrO x /Al 2 O 3 catalyst. Despite its use, there are still uncertainties surrounding the nature of Cr species formed during synthesis, regeneration, and aging. It has been observed that ppm levels of Cr 2 O 3 can be oxidized to Cr(VI) in air; however, when Cr 2 O 3 is in direct contact with Al 2 O 3 , Cr(VI) formation increased more than 100-fold. Here, to confirm physical contact between Cr 2 O 3 and Al 2 O 3 results in increased Cr(VI) formation, Cr 2 O 3 and Cr 2 O 3 /Al 2 O 3 samples were synthesized, calcined, and characterized. Catalytic activity measurements confirm propylene selectivity inversely tracks with Cr(VI). Wet chemical titration and X-ray absorption spectroscopy (XAS) quantified and determined the structure of the Cr(VI) species. FEFF X-ray absorption near edge structure simulations determined the potential sensitivity of the XAS to the presence of Al 3+ /Cr 3+ neighboring atoms. XAS correlated to FEFF simulations suggested that Al 3+ x Cr 3+ 2–x Cr 6+ 3 O 12 comprises a significant fraction of the Cr(VI) species formed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

X-ray absorption spectroscopic study of the alumina supported Fe and FeMo catalysts for methane dehydrogenation

Nanoscale Fe (5%Fe/Al 2 O 3 ) and FeMo (4.5%Fe-0.5%Mo/Al 2 O 3 ) catalysts are prepared by precipitating metal components onto alumina and then reducing in hydrogen at 700 °C for 2 hrs. Here, the catalysts are characterized before and after their exposures to methane at 700 °C, employing ex-situ X-ray absorption spectroscopy (XAS) and X-ray diffraction techniques. XAS data of the as-prepared catalysts shows that, iron precipitates onto alumina as 6L-ferrihydrite, and Mo is present as molybdate (Mo(VI)O 4 2- ). The molybdate, which binds the alumina in the as-prepared FeMo catalyst, is partially reduced to MoO 2 . The reduction of iron to metallic state is incomplete because the ferrous iron binds the alumina, forming hercynite. After several hrs of methane exposure to both the catalysts at 700 °C, a major Fe 3 C and a graphite phase are observed only in the FeMo catalyst. The observation confirms that the Mo promotes more iron to an active Fe metal, a part of that metal converts to Fe 3 C and austenite (Fe x C). Concurrently, the MoO 2 converts to Mo-oxycarbide (MoO x C y ), the latter then carburize to Mo 2 C in the FeMo catalyst. The Fe metal, Mo-oxycarbide and metal carbides are mainly responsible for the conversion of methane to H 2 and carbon. At reaction temperature > 900 °C, the Mo carbide particles agglomerate, and the excess carbon deposits on this agglomerate leading to catalyst deactivation. The deactivated catalyst is regenerated with CO 2 treatment at 1000 °C to restore its initial oxide structure.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Surface anchoring requirements for vanadia clusters on titanium oxide surfaces and their impact on activity for oxidative dehydrogenation of ethanol

Titanium oxide site requirements for the anchoring of catalytically active forms of dispersed vanadia species are investigated. Using a series of oxygen-modified titanium nitride materials, we systematically modify the available vanadia-anchoring moieties on the titanium-bearing support surface. This strategy in turn results in a very narrow size distribution of well-dispersed vanadia clusters anchored on the support. This synthesis technique ensures that only highly dispersed vanadia is present on the catalyst surface even at nominal monolayer coverages. A deeper insight into the catalytic behavior for ethanol partial oxidation of the active vanadia species is obtained by comparing intrinsic kinetic and thermodynamic parameters of kinetically relevant reaction steps (heat of ethanol adsorption, hydrogen abstraction activation energy, and the energetics of catalyst reoxidation). In conclusion, it is found that these parameters are dependent on the relative amount of oxygen in the titanium-bearing support and the resulting distribution of vanadia species, which validates the premise of a potential participation of lattice oxygen atoms of the titania support into the catalytic activity of active vanadia species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Can CO 2 -assisted alkane dehydrogenation lead to negative CO 2 emissions?

The utilization of light alkanes to generate value-added chemicals has gained significant attention due to the U.S. shale gas boom in recent decades. For example, after methane, ethane (3-16 vol.%) and propane (up to 5 vol.%) are the most abundant hydrocarbon species in shale gas deposits. Further, these inexpensive, widely available, but often underutilized, light alkanes can be used as a feedstock to produce olefins, which are among the most important petrochemical building blocks in chemical industry. Ethylene and propylene are used in the production of polymers (e.g., polyethylene, polypropylene) and epoxides (e.g., ethylene oxide, propylene oxide), as well as intermediates in the manufacture of numerous other chemicals (e.g., ethylene glycol, ethylbenzene, acetone, isopropanol, acrylonitrile).

03 NATURAL GAS↗
DOE OSTI2023

Non-Oxidative Ethane Dehydrogenation in a Packed-Bed DBD Plasma Reactor

Abstract Plasma-assisted conversion of ethane (C 2 H 6 ) can produce value-added chemical building blocks using green electricity. Here we employ a simple packed-bed coaxial dielectric barrier discharge (DBD) reactor to convert C 2 H 6 at mild operating conditions unattainable by conventional thermocatalysis. Ethylene (C 2 H 4 ), acetylene (C 2 H 2 ), and methane (CH 4 ) are the main products along with small fractions of C 3 and C 4 hydrocarbons. Interestingly, the C 2 H 4 selectivity is primarily correlated to C 2 H 6 conversion, dominated by electron dissociation and recombination reactions irrespective of the dielectric properties of the packed bed material (SiO 2 , Al 2 O 3 , ZrO 2 , TiO 2 , and BaTiO 3 ), packing material size, supplied power, and C 2 H 6 concentration. While a distortion of the electric field and discharge propagation results in varying dissipated power as materials change, the C 2 H 4 energy yield remains constant. The particle size appears to affect conversion mainly due to pressure alterations. Pd/SiO 2 catalyst can change the selectivity, favoring saturated species by expending hydrogen.

Engineering↗