Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Defect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

First principles calculations of point defect diffusion in CdS buffer layers: Implications for Cu(In,Ga)(Se,S){sub 2} and Cu{sub 2}ZnSn(Se,S){sub 4}-based thin-film photovoltaics

We investigate point defects in CdS buffer layers that may arise from intermixing with Cu(In,Ga)Se{sub 2} (CIGSe) or Cu{sub 2}ZnSn(S,Se){sub 4} (CZTSSe) absorber layers in thin-film photovoltaics (PV). Using hybrid functional calculations, we characterize the migration barriers of Cu, In, Ga, Se, Sn, Zn, Na, and K impurities and assess the activation energies necessary for their diffusion into the bulk of the buffer. We find that Cu, In, and Ga are the most mobile defects in CIGS-derived impurities, with diffusion expected to proceed into the buffer via interstitial-hopping and cadmium vacancy-assisted mechanisms at temperatures ∼400 °C. Cu is predicted to strongly favor migration paths within the basal plane of the wurtzite CdS lattice, which may facilitate defect clustering and ultimately the formation of Cu-rich interfacial phases as observed by energy dispersive x-ray spectroscopic elemental maps in real PV devices. Se, Zn, and Sn defects are found to exhibit much larger activation energies and are not expected to diffuse within the CdS bulk at temperatures compatible with typical PV processing temperatures. Lastly, we find that Na interstitials are expected to exhibit slightly lower activation energies than K interstitials despite having a larger migration barrier. Still, we find both alkali species are expected to diffuse via an interstitially mediated mechanism at slightly higher temperatures than enable In, Ga, and Cu diffusion in the bulk. Our results indicate that processing temperatures in excess of ∼400 °C will lead to more interfacial intermixing with CdS buffer layers in CIGSe devices, and less so for CZTSSe absorbers where only Cu is expected to significantly diffuse into the buffer.

36 MATERIALS SCIENCE↗

Radiation defect dynamics in SiC with pre-existing defects

The influence of pre-existing lattice disorder on radiation defect dynamics in SiC remains unexplored. Here, we use a pulsed ion beam method to study dynamic annealing in Ar-ion-bombarded 3C-SiC at 200°C with different levels of pre-existing lattice disorder. Results reveal a nonmonotonic dependence of the defect relaxation time constant on the level of pre-existing disorder, exhibiting a maximum of ~4 ms at a level of relative initial disorder of ~0.4, while crystals without pre-existing damage are characterized by a time constant of ~1.4 ms. These observations demonstrate that radiation defect dynamics in SiC can be controlled by defect engineering.

36 MATERIALS SCIENCE↗

Dark matter with topological defects in the Inert Doublet Model

We examine the production of dark matter by decaying topological defects in the high mass region m{sub DM}≫m{sub W} of the Inert Doublet Model, extended with an extra U(1) gauge symmetry. The density of dark matter states (the neutral Higgs states of the inert doublet) is determined by the interplay of the freeze-out mechanism and the additional production of dark matter states from the decays of topological defects, in this case cosmic strings. These decays increase the predicted relic abundance compared to the standard freeze-out only case, and as a consequence the viable parameter space of the Inert Doublet Model can be widened substantially. In particular, for a given dark matter annihilation rate lower dark matter masses become viable. We investigate the allowed mass range taking into account constraints on the energy injection rate from the diffuse γ-ray background and Big Bang Nucleosynthesis, together with constraints on the dark matter properties coming from direct and indirect detection limits. For the Inert Doublet Model high-mass region, an inert Higgs mass as low as ∼200 GeV is permitted. There is also an upper limit on string mass per unit length, and hence the symmetry breaking scale, from the relic abundance in this scenario. Depending on assumptions made about the string decays, the limits are in the range 10{sup 12} GeV to 10{sup 13} GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Generic equilibration dynamics of planar defects in trapped atomic superfluids

Here, we investigate equilibration processes shortly after sudden perturbations are applied to ultracold trapped superfluids. We show the similarity of phase imprinting and localized density depletion perturbations, both of which initially are found to produce “phase walls”. These planar defects are associated with a sharp gradient in the phase. Importantly they relax following a quite general sequence. Our studies, based on simulations of the complex time-dependent Ginzburg-Landau equation, address the challenge posed by these experiments: how a superfluid eventually eliminatesa spatially extended planar defect. The processes involved are necessarily more complex than equilibration involving simpler line vortices. An essential mechanism form relaxation involves repeated formation and loss of vortex rings near the trap edge.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlative Characterization of Dislocation Defects and Defect Clusters in GaAs and CdTe Solar Cells by Spatially Resolved Optical Techniques and High-Resolution TEM

An array of correlative and spatially-resolved techniques, including electroluminescence, photoluminescence, Raman, I-V curve, and high-resolution TEM, have been performed on both GaAs and CdTe solar cells, to study the impact of individual dislocation defects and defect clusters on device performance, the dependence of the impact on the device operation conditions, and the microscopic structures of the defects. This approach offers quantitative and definitive correlation between the atomistic structure of a defect and its effects in a real device.

14 SOLAR ENERGY↗

On Space Charge and Spatial Distribution of Defects in Yttria-Stabilized Zirconia

Space charge in 8YSZ is examined theoretically. The Poisson-Boltzmann equation is solved by free energy minimization. The Helmholtz free energy of a crystal containing various defects is minimized subject to two constraints: The total dopant concentration is fixed and the maximum amount of surface charge is limited by site density. Large dopant concentration leads to defect concentrations which deviate from Boltzmann distribution. When free energy isminimized assuming all defects attain their equilibrium distributions, the corresponding electrochemical potentials are equilibrated through the crystal. These calculations correspond to long annealing times. Calculations are also conducted for a case in which only oxygen vacancies are allowed to equilibrate at lower temperature after a high temperature anneal. At lower temperatures, cations are frozen corresponding to high temperature anneal. In this case, only the electrochemical potential of oxygen vacancies equilibrates. In all cases Y segregates to grain boundaries/free surfaces lowering the corresponding oxygen vacancy concentration, consistent with reported effect of space charge on grain boundary conductivity. The results show a significant concentration of oxygen vacancies form defect complexes with Y dopant. Thus, free oxygen vacancy concentration is considerably lower than the usually assumed electroneutrality condition based on total dopant concentration.

36 MATERIALS SCIENCE↗

Lattice defects in semiconducting Hg/1-x/Cd/x/Te alloys. III - Defect structure of undoped Hg0.6Cd0.4Te

Hall effect measurements were carried out on undoped Hg0.6Cd0.4Te crystals quenched to room temperature subsequent to equilibration at temperatures varying from 450 to 720 C under various partial pressures of Hg. The variation of the hole concentration as a function of the partial pressure of Hg indicates that the native acceptor defects are doubly ionized. Native donor defects are found to be negligible in concentration and the p-type to n-type conversion is shown to be due to residual donors and not due to native donor defects. Thermodynamic constant for the incorporation of the doubly ionized native acceptor defect has been established.

Vydyanath, H. R.↗

Grown-in defects and defects produced by 1-Me electron irradiated in Al0.3Ga0.7As P-N junction solar cells

Studies of grown-in defects and defects produced by the one-MeV electron irradiation in Al sub 0.3 Ga sub 0.7As p-n junction solar cells fabricated by liquid phase epitaxial (LPE) technique were made for the unirradiated and one-MeV electron irradiated samples, using DLTS and C-V methods. Defect and recombination parameters such as energy level, defect density, carrier capture cross sections and lifetimes were determined for various growth, annealing, and irradiation conditions.

Li, S. S.↗

Atomically Abrupt Liquid-Oxide Interface Stabilized by Self-Regulated Interfacial Defects: The Case of Al/Al2O3 Interfaces

The atomic and electronic structures of the liquid Al/(0001) {alpha}-Al{sub 2}O{sub 3} interfaces are investigated by first-principles molecular dynamics simulations. Surprisingly, the formed liquid-solid interface is always atomically abrupt and is characterized by a transitional Al layer that contains a fixed concentration of Al vacancies ({approx}10 at.%). We find that the self-regulation of the defect density in the metal layer is due to the fact that the formation energy of the Al vacancies is readjusted in a way that opposes changes in the defect density. The negative-feedback effect stabilizes the defected transitional layer and maintains the atomic abruptness at the interface. The proposed mechanism is generally applicable to other liquid-metal/metal-oxide systems, and thus of significant importance in understanding the interface structures at high temperature.

36 MATERIALS SCIENCE↗

Exciton photoluminescence and benign defect complex formation in zinc tin nitride

Emerging photovoltaic materials need to prove their viability by demonstrating excellent electronic properties. In ternary and multinary semiconductors, disorder and off-stoichiometry often cause defects that limit the potential for high-efficiency solar cells. We report on Zn-rich ZnSnN 2 (Zn/(Zn + Sn) = 0.67) photoluminescence, high-resolution X-ray diffraction, and electronic structure calculations based on Monte-Carlo structural models. The mutual compensation of Zn excess and O incorporation affords a desirable reduction of the otherwise degenerate n-type doping, but also leads to a strongly off-stoichiometric and disordered atomic structure. It is therefore remarkable that we observe only near-edge photoluminescence from well-resolved excitons and shallow donors and acceptors. Based on first principles calculations, this result is explained by the mutual passivation of Zn Sn and O N defects that renders both electronically benign. The calculated bandgaps range between 1.4 and 1.8 eV, depending on the degree of non-equilibrium disorder. The experimentally determined value of 1.5 eV in post-deposition annealed samples falls within this interval, indicating that further bandgap engineering by disorder control should be feasible via appropriate annealing protocols.

36 MATERIALS SCIENCE↗

Defects in paramagnetic Co-doped ZnO films studied by transmission electron microscopy

We study planar defects in epitaxial Co:ZnO dilute magnetic semiconductor thin films deposited on c-plane sapphire (Al{sub 2}O{sub 3}), as well as the Co:ZnO/Al{sub 2}O{sub 3} interface, using aberration-corrected transmission electron microscopy and electron energy-loss spectroscopy. Co:ZnO samples that were deposited using pulsed laser deposition and reactive magnetron sputtering are both found to contain extrinsic stacking faults, incoherent interface structures, and compositional variations within the first 3–4 Co:ZnO layers next to the Al{sub 2}O{sub 3} substrate. The stacking fault density is in the range of 10{sup 17} cm{sup −3}. We also measure the local lattice distortions around the stacking faults. It is shown that despite the relatively high density of planar defects, lattice distortions, and small compositional variation, the Co:ZnO films retain paramagnetic properties.

36 MATERIALS SCIENCE↗

Defect mode properties of two-dimensional plasma-filled defective metallic photonic crystal

This paper studies the frequency and amplitude properties of a defect mode which is only in a plasma-filled metallic photonic crystal with defect layer. Results show that the frequency almost has no change and the amplitude declines gradually with the growth of the number of the layers. The frequency of the defect mode not only can be modulated by filling ratio but also can be tuned by plasma density without modifying the structure. The amplitude can be modified by plasma angular frequency as well. These characteristics provide a foundation to design tunable filters, high power millimeter devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonradiative coherent carrier captures and defect reaction at deep-level defects via phonon-kick mechanism

We simulated the time evolution of electron-lattice coupling mode, and a series of nonradiative carrier captures by a deep-level defect in a semiconductor. For lattice relaxation energy of the order of the band gap, a series of coherent (athermal) electron and hole captures by a defect is possible for high carrier densities, which results in an inflation in the induced lattice vibration, which in turn enhances a defect reaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Defects, stoichiometry, and electronic transport in SrTiO{sub 3-δ} epilayers: A high pressure oxygen sputter deposition study

SrTiO{sub 3} is not only of enduring interest due to its unique dielectric, structural, and lattice dynamical properties, but is also the archetypal perovskite oxide semiconductor and a foundational material in oxide heterostructures and electronics. This has naturally focused attention on growth, stoichiometry, and defects in SrTiO{sub 3}, one exciting recent development being such precisely stoichiometric defect-managed thin films that electron mobilities have finally exceeded bulk crystals. This has been achieved only by molecular beam epitaxy, however (and to a somewhat lesser extent pulsed laser deposition (PLD)), and numerous open questions remain. Here, we present a study of the stoichiometry, defects, and structure in SrTiO{sub 3} synthesized by a different method, high pressure oxygen sputtering, relating the results to electronic transport. We find that this form of sputter deposition is also capable of homoepitaxy of precisely stoichiometric SrTiO{sub 3}, but only provided that substrate and target preparation, temperature, pressure, and deposition rate are carefully controlled. Even under these conditions, oxygen-vacancy-doped heteroepitaxial SrTiO{sub 3} films are found to have carrier density, mobility, and conductivity significantly lower than bulk. While surface depletion plays a role, it is argued from particle-induced X-ray emission (PIXE) measurements of trace impurities in commercial sputtering targets that this is also due to deep acceptors such as Fe at 100's of parts-per-million levels. Comparisons of PIXE from SrTiO{sub 3} crystals and polycrystalline targets are shown to be of general interest, with clear implications for sputter and PLD deposition of this important material.

36 MATERIALS SCIENCE↗