SEARCH · Engineering Papers

Results for “Data Races”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Lower viral evolutionary pressure under stable versus fluctuating conditions in subzero Arctic brines

Climate change threatens Earth’s ice-based ecosystems which currently offer archives and eco-evolutionary experiments in the extreme. Arctic cryopeg brine (marine-derived, within permafrost) and sea ice brine, similar in subzero temperature and high salinity but different in temporal stability, are inhabited by microbes adapted to these extreme conditions. However, little is known about their viruses (community composition, diversity, interaction with hosts, or evolution) or how they might respond to geologically stable cryopeg versus fluctuating sea ice conditions. We used long- and short-read viromics and metatranscriptomics to study viruses in Arctic cryopeg brine, sea ice brine, and underlying seawater, recovering 11,088 vOTUs (~species-level taxonomic unit), a 4.4-fold increase of known viruses in these brines. More specifically, the long-read-powered viromes doubled the number of longer (≥25 kb) vOTUs generated and recovered more hypervariable regions by >5-fold compared to short-read viromes. Distribution assessment, by comparing to known viruses in public databases, supported that cryopeg brine viruses were of marine origin yet distinct from either sea ice brine or seawater viruses, while 94% of sea ice brine viruses were also present in seawater. A virus-encoded, ecologically important exopolysaccharide biosynthesis gene was identified, and many viruses (~half of metatranscriptome-inferred “active” vOTUs) were predicted as actively infecting the dominant microbial genera Marinobacter and Polaribacter in cryopeg and sea ice brines, respectively. Evolutionarily, microdiversity (intra-species genetic variations) analyses suggested that viruses within the stable cryopeg brine were under significantly lower evolutionary pressures than those in the fluctuating sea ice environment, while many sea ice brine virus-tail genes were under positive selection, indicating virus-host co-evolutionary arms races. Our results confirmed the benefits of long-read-powered viromics in understanding the environmental virosphere through significantly improved genomic recovery, expanding viral discovery and the potential for biological inference. Evidence of viruses actively infecting the dominant microbes in subzero brines and modulating host metabolism underscored the potential impact of viruses on these remote and underexplored extreme ecosystems. Microdiversity results shed light on different strategies viruses use to evolve and adapt when extreme conditions are stable versus fluctuating. Together, these findings verify the value of long-read-powered viromics and provide foundational data on viral evolution and virus-microbe interactions in Earth’s destabilized and rapidly disappearing cryosphere.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2020

A template of information needs for decision-making about delaying remediation on contaminated lands to protect human health

The contamination legacy of industrialization, militarization, and nuclear arms race poses current or future risks to populations and the environment. Responsible parties and regulators make decisions regarding which sites to clean up, how, how much, and when. This study aimed to provide an information needs template to evaluate and reduce risks to human health when considering whether to initiate or delay remediation. This investigation focused on four aspects of timing and prioritization: 1) management, planning and implementation, 2) source terms, pathways, and exposures, 3) risks and receptors, and 4) external drivers. Within each type, issues were identified and described. Management class included personnel, health and safety data, funding, equipment, and structural integrity. Source term included contaminant sources, pathways, initiating events, and barriers to exposure. Risk included types and exposures to workers and general public. External drivers included regulatory framework, stakeholders, Congressional mandates, and economic and social contexts. Risk may increase over time as contamination spreads, enters aquifers, and reaches receptors, and may decline as radionuclides decay, and plumes dissipate. The overall objective was to provide a template of information that is useful to managers and regulators, and might be used by the public to understand the risks and benefits of re-prioritization cleanup.

Environmental Sciences & Ecology↗

NASA NTRS2013

US Rocket Propulsion Industrial Base Health Metrics

The number of active liquid rocket engine and solid rocket motor development programs has severely declined since the "space race" of the 1950s and 1960s center dot This downward trend has been exacerbated by the retirement of the Space Shuttle, transition from the Constellation Program to the Space launch System (SLS) and similar activity in DoD programs center dot In addition with consolidation in the industry, the rocket propulsion industrial base is under stress. To Improve the "health" of the RPIB, we need to understand - The current condition of the RPIB - How this compares to past history - The trend of RPIB health center dot This drives the need for a concise set of "metrics" - Analogous to the basic data a physician uses to determine the state of health of his patients - Easy to measure and collect - The trend is often more useful than the actual data point - Can be used to focus on problem areas and develop preventative measures The nation's capability to conceive, design, develop, manufacture, test, and support missions using liquid rocket engines and solid rocket motors that are critical to its national security, economic health and growth, and future scientific needs. center dot The RPIB encompasses US government, academic, and commercial (including industry primes and their supplier base) research, development, test, evaluation, and manufacturing capabilities and facilities. center dot The RPIB includes the skilled workforce, related intellectual property, engineering and support services, and supply chain operations and management. This definition touches the five main segments of the U.S. RPIB as categorized by the USG: defense, intelligence community, civil government, academia, and commercial sector. The nation's capability to conceive, design, develop, manufacture, test, and support missions using liquid rocket engines and solid rocket motors that are critical to its national security, economic health and growth, and future scientific needs. center dot The RPIB encompasses US government, academic, and commercial (including industry primes and their supplier base) research, development, test, evaluation, and manufacturing capabilities and facilities. center dot The RPIB includes the skilled workforce, related intellectual property, engineering and support services, and supply chain operations and management. This definition touches the five main segments of the U.S. RPIB as categorized by the USG: defense, intelligence community, civil government, academia, and commercial sector.

Doreswamy, Rajiv↗

NASA NTRS2014

Observations of Spacecraft Bearing Lubricant Redistribution Based on Thermal Conductance Measurements

The performance and life of precision ball bearings are critically dependent on maintaining a quantity of oil at the ball/race interface that is sufficient to support a robust protective film. In space applications, where parched conditions are intentionally the norm, harsh operating conditions can displace the small reserves of oil, resulting in reduced film thickness and premature wear. In the past, these effects have proven difficult to model or to measure experimentally. This paper describes a study addressing this challenge, where bearing thermal conductance measurements are employed to infer changes in lubricant quantity at the critical rolling interfaces. In the first part of the paper, we explain how the lubricant's presence and its quantity impacts bearing thermal conductance measurements. For a stationary bearing, we show that conductance is directly related to the lubricant quantity in the ball/race contacts. Hence, aspects of bearing performance related to oil quantity can be understood and insights improved with thermal conductance data. For a moving bearing, a different mechanism of heat transfer dominates and is dependent on lubricant film thickness on the ball. In the second part of the report, we discuss lubricant quantity observations based on bearing thermal conductance measurements. Lubricant quantity, and thus bearing thermal conductance, depends on various initial and operating conditions and is impacted further by the run-in process. A significant effect of maximum run-in speed was also observed, with less oil remaining after obtaining higher speeds. Finally, we show that some of the lubricant that is displaced between the ball and race during run-in operation can be recovered during rest, and we measure the rate of recovery for one example.

Takeuchi, Yoshimi R.↗

DOE OSTI2018

Tissue-specific variation in 5-terminal exons of mouse Anoctamin 1 transcript induces N-terminal variation of its protein via alternative translational start sites

Anoctamin 1 (encoded by the Ano1 gene) is a Ca{sup 2+}-activated Cl{sup −} channel critical to many physiological functions. It has been speculated that Ano1 expression is regulated in a tissue-dependent manner via alternative promoters. However, variation in the 5-end sequence of mouse Ano1 (mAno1) and its tissue-dependent regulation are poorly understood. We identified a novel 5-terminal exon (designated exon 1a) of mAno1 instead of the known 5-terminal exon (exon 0) using 5-rapid amplification of cDNA ends (RACE) analysis. Unexpectedly, the novel 5-end variant mAno1{sub Ex1a} was abundantly expressed in many tissues including the salivary and mammary glands, rectum, lung, trachea and prostate. In contrast, the known variant mAno1{sub Ex0} predominated only in male reproductive tissues such as the epididymis and testis. In a heterologous expression system, mAno1{sub Ex0} encoded a longer protein than mAno1{sub Ex1a}, and this long isoform was abolished by a mutation in the exon 0 start codon. Moreover, the mAno1{sub Ex0}-specific N-terminal sequence was immunohistochemically detected in epididymis but not in salivary gland. Our data suggest that mAno1 expression is regulated via alternative promoters, and its transcriptional variation results in variation of the N-terminal sequence of the Ano1 protein due to the alternative translation initiation sites. These tissue-specific variations might contribute to the regulation of mAno1 expression and activity according to the physiological function of each tissue.

60 APPLIED LIFE SCIENCES↗

NASA NTRS1978

Graphite-fiber-reinforced polyimide liners of various compositions in plain spherical bearings

A plain spherical bearing design with a ball diameter of 28.6 mm, a race length of 12.7 mm, and a 1.7-mm-thick, molded composite liner was evaluated. The liner material is a self-lubricating composite of graphite-fiber-reinforced polyimide resin (GFRPI). The liner is prepared by transfer molding a mixture of one part chopped graphite fiber and one part partially polymerized resin into the space between the bearing ball and the outer race and then completing the polymerization under heat and pressure. Several liner compositions were evaluated: two types of polyimide, condensation and addition; two types of graphite fiber, low and high modulus; and four powder additives - cadmium oxide, cadmium iodide, graphite fluoride, and molybdenum disulfide. The bearings were oscillated + or - 15 deg at 1 Hz for 20 kilocycles under a radial unit load of 29 MN sq m (4200 psi) in dry air at 25, 200, or 315 C. Both types of fiber and polyimide gave low friction and wear. A simple equation was developed to fit the wear-time data and adequately predicted wear to 100 kilocycles.

Sliney, H. E.↗

NASA NTRS2010

Interference-Fit Life Factors for Ball Bearings

The effect of hoop stresses on the rolling-element fatigue life of angular-contact and deep-groove ball bearings was determined for common inner-ring interference fits at the ABEC-5 tolerance level. The analysis was applied to over 1150 bearing configurations and load cases. Hoop stresses were superimposed on the Hertzian principal stresses created by the applied bearing load to calculate the inner-race maximum shearing stress. The resulting fatigue life of the bearing was recalculated through a series of equations. The reduction in the fatigue life is presented as life factors that are applied to the unfactored bearing life. The life factors found in this study ranged from 1.00 (no life reduction)--where there was no net interface pressure--to a worst case of 0.38 (a 62-percent life reduction). For a given interference fit, the reduction in life is different for angular-contact and deep-groove ball bearings. Interference fits also affect the maximum Hertz stress-life relation. Experimental data of Czyzewski, showing the effect of interference fit on rolling-element fatigue life, were reanalyzed to determine the shear stress-life exponent. The Czyzewski data shear stress-life exponent c equals 8.77, compared with the assumed value of 9. Results are presented as tables and charts of life factors for angular-contact and deep-groove ball bearings with light, normal, and heavy loads and interference fits ranging from extremely light to extremely heavy.

Oswald, Fred B.↗

DOE OSTI2015

3D face analysis for demographic biometrics

Despite being increasingly easy to acquire, 3D data is rarely used for face-based biometrics applications beyond identification. Recent work in image-based demographic biometrics has enjoyed much success, but these approaches suffer from the well-known limitations of 2D representations, particularly variations in illumination, texture, and pose, as well as a fundamental inability to describe 3D shape. This paper shows that simple 3D shape features in a face-based coordinate system are capable of representing many biometric attributes without problem-specific models or specialized domain knowledge. The same feature vector achieves impressive results for problems as diverse as age estimation, gender classification, and race classification.

Tokola, Ryan A↗

DOE OSTI2020

Protein intake is more stable than carbohydrate or fat intake across various US demographic groups and international populations

The optimal macronutrient composition of the diet is controversial and many adults attempt to regulate the intake of specific macronutrients for various health-related reasons. The objective was to compare stability and ranges of intakes of different macronutrients across diverse adult populations in the USA and globally. US dietary intake data from NHANES 2009–2014 were used to determine macronutrient intake as a percentage of total energy intake. Variability in macronutrient intake was estimated by calculating the difference between 75th and 25th percentile (Q3–Q1) IQRs of macronutrient intake distributions. In addition, intake data from 13 other countries with per capita gross domestic product (GDP) over $10,000 US dollars (USD) were used to assess variability of intake internationally since there are large differences in types of foods consumed in different countries. Protein, carbohydrate, and fat intake (NHANES 2009–2014) was 15.7 ± 0.1, 48.1 ± 0.1, and 32.9 ± 0.1% kcal, respectively, in US adults. The IQR of protein intake distribution (3.73 ± 0.11% kcal) was 41% of carbohydrate intake distribution (9.18 ± 0.20% kcal) and 58% of fat intake distribution (6.40 ± 0.14% kcal). The IQRs of carbohydrate and fat intake distributions were significantly (P <0.01) influenced by age and race; however, the IQR of protein intake was not associated with demographic and lifestyle factors including sex, race, income, physical activity, and body weight. International mean protein intake was 16.3 ± 0.2% kcal, similar to US intake, and there was less variation in protein than carbohydrate or fat intake. Protein intake of the US population and multiple international populations, regardless of demographic and lifestyle factors, was consistently ~16% of total energy, suggesting biological control mechanism(s) tightly regulate protein intake and, consequently, influence intake of other macronutrients and food constituents. Substantial differences in intake of the other macronutrients observed in US and international populations had little influence on protein intake. This trial was registered at the ISRCTN registry as ISRCTN46157745

dietary preferences↗

NASA NTRS1989

Comparison of predicted and measured temperatures of UH-60A helicopter transmission

The 2109-kW (2828-hp) UH-60A Black Hawk helicopter transmission was one of the transmissions used to obtain an experimental data base. Component improvements or new transmission concepts can thus be evaluated by comparison with the established data. Results of efficiency and vibration tests of the UH-60A have been reported previously. In this investigation the transmission was instrumented internally and tested over a range of operating conditions. The speed was varied from 50 to 100 percent of the full rated value, and the torque was varied from 10 to 100 percent of the full rated value. Temperatures of internal bearings and gears were measured. The computer program Planetsys was used to simulate the thermal performance of this transmission. The calculated temperatures were then compared with the corresponding measured values. The highest measured temperature was 405 K (270 F) on the outer race of the high-speed input shaft roller bearing, at the 100-percent power condition. In general, the predicted temperatures compared very well with the measured values, most of them being within 5 kelvin (9 F). Specifically, the temperatures predicted for the single-row spherical roller planetary bearing averaged only about 4 kelvin (8 F) lower than the highest measured value.

Coe, Harold H.↗

DOE OSTI2023

Predicting Postoperative Injury and Military Discharge Status After Knee Surgery in the US Army

Background: Researchers have assessed postoperative injury or disability predictors in the military setting but typically focused on 1 type of surgical procedure at a time, used relatively small sample sizes, or investigated mixed cohorts with civilian populations. Purpose: To identify the relationship between baseline variables and injury incidence or military discharge status in US Army soldiers after knee surgery. Study Design: Case-control study; Level of evidence, 3. Methods: Data were obtained from a repository containing personnel, performance, and medical records for all active-duty US Army soldiers. Multivariate logistic regressions were used to estimate the effects of numerous variables on postoperative injury or on medical discharge. Variable selection and model validation were conducted using the k-fold method. Results: A total of 7567 soldiers underwent knee surgery between 2017 and 2019. Meniscal procedures were the most common type of surgery (39%), and approximately 71% of the cohort had a postoperative injury. Significant predictors for sustaining a postoperative injury included having a previous nonknee injury (odds ratio [OR], 1.5), female sex (OR, 1.3), and Black race (OR, 1.2). Within 4 years after surgery, 17% of soldiers were discharged from the military because of knee-related disability. Significant predictors for discharge from duty included enlisted rank (OR, 2.3), recent fitness test failure (OR, 1.9), number of previous knee surgeries (OR, 1.7), and having a previous nonknee injury (OR, 1.6). Conclusion: After knee surgery, nearly three-fourths of the soldiers in this cohort sustained a postoperative injury and almost one-fifth of soldiers were medically discharged from the military within 4 years. This study identified variables that indicate statistically increased risk for these postoperative outcomes and highlighted potentially modifiable factors.

Orthopedics↗

DOE OSTI2024

Organochlorine pesticides and risk of papillary thyroid cancer in U.S. military personnel: a nested case-control study

Background: The effects of organochlorine pesticide (OCP) exposure on the development of human papillary thyroid cancer (PTC) are not well understood. A nested case-control study was conducted with data from the U.S. Department of Defense Serum Repository (DoDSR) cohort between 2000 and 2013 to assess associations of individual OCPs serum concentrations with PTC risk. Methods: This study included 742 histologically confirmed PTC cases (341 females, 401 males) and 742 individually-matched controls with pre-diagnostic serum samples selected from the DoDSR. Associations between categories of lipid-corrected serum concentrations of seven OCPs and PTC risk were evaluated for classical PTC and follicular PTC using conditional logistic regression, adjusted for body mass index category and military branch to compute odds ratios (OR) and 95% confidence intervals (CIs). Effect modification by sex, birth cohort, and race was examined. Results: There was no evidence of associations between most of the OCPs and PTC, overall or stratified by histological subtype. Overall, there was no evidence of an association between hexachlorobenzene (HCB) and PTC, but stratified by histological subtype HCB was associated with significantly increased risk of classical PTC (third tertile above the limit of detection (LOD) vs. <LOD, OR = 1.61, 95% CI, 1.09, 2.38; p for trend = 0.05) and significantly decreased risk of follicular variant PTC (third tertile above the limit of detection (LOD) vs. <LOD, OR = 0.38, 95% CI, 0.16, 0.91; p for trend = 0.04). Further stratified by sex, risk of classical PTC was higher for females (third tertile above LOD vs. <LOD, OR = 2.23, 95% CI: 1.23, 4.06; p-trend = 0.02) than for males (OR = 1.22, 95%CI: 0.72–2.08; p-trend = 0.56), though the test for interaction by sex was not statistically significant (p-interaction = 0.30). Similarly, β-hexachlorocyclohexane (β-HCCH) was associated with a higher risk for classical PTC for women with concentrations ≥LOD versus <LOD (OR = 1.76, 95% CI: 1.07, 2.89), while the effects were null for men. There were no consistent trends when stratified by race or birth year. Conclusions: The U.S. Environmental Protection Agency has classified HCB and other OCPs we studied here as probable human carcinogens. Our findings of increased risks for classical PTC associated with increased concentrations of HCB and β-HCCH, which were stronger among females, should be replicated in future studies of other populations.

60 APPLIED LIFE SCIENCES↗

NASA NTRS2009

Virtual Diagnostic Interface: Aerospace Experimentation in the Synthetic Environment

The Virtual Diagnostics Interface (ViDI) methodology combines two-dimensional image processing and three-dimensional computer modeling to provide comprehensive in-situ visualizations commonly utilized for in-depth planning of wind tunnel and flight testing, real time data visualization of experimental data, and unique merging of experimental and computational data sets in both real-time and post-test analysis. The preparation of such visualizations encompasses the realm of interactive three-dimensional environments, traditional and state of the art image processing techniques, database management and development of toolsets with user friendly graphical user interfaces. ViDI has been under development at the NASA Langley Research Center for over 15 years, and has a long track record of providing unique and insightful solutions to a wide variety of experimental testing techniques and validation of computational simulations. This report will address the various aspects of ViDI and how it has been applied to test programs as varied as NASCAR race car testing in NASA wind tunnels to real-time operations concerning Space Shuttle aerodynamic flight testing. In addition, future trends and applications will be outlined in the paper.

Schwartz, Richard J.↗

NASA NTRS2010

Virtual Diagnostic Interface: Aerospace Experimentation in the Synthetic Environment

Schwartz, Richard J.↗

NASA NTRS2013

SequenceL: Automated Parallel Algorithms Derived from CSP-NT Computational Laws

With the introduction of new parallel architectures like the cell and multicore chips from IBM, Intel, AMD, and ARM, as well as the petascale processing available for highend computing, a larger number of programmers will need to write parallel codes. Adding the parallel control structure to the sequence, selection, and iterative control constructs increases the complexity of code development, which often results in increased development costs and decreased reliability. SequenceL is a high-level programming language that is, a programming language that is closer to a human s way of thinking than to a machine s. Historically, high-level languages have resulted in decreased development costs and increased reliability, at the expense of performance. In recent applications at JSC and in industry, SequenceL has demonstrated the usual advantages of high-level programming in terms of low cost and high reliability. SequenceL programs, however, have run at speeds typically comparable with, and in many cases faster than, their counterparts written in C and C++ when run on single-core processors. Moreover, SequenceL is able to generate parallel executables automatically for multicore hardware, gaining parallel speedups without any extra effort from the programmer beyond what is required to write the sequen tial/singlecore code. A SequenceL-to-C++ translator has been developed that automatically renders readable multithreaded C++ from a combination of a SequenceL program and sample data input. The SequenceL language is based on two fundamental computational laws, Consume-Simplify- Produce (CSP) and Normalize-Trans - pose (NT), which enable it to automate the creation of parallel algorithms from high-level code that has no annotations of parallelism whatsoever. In our anecdotal experience, SequenceL development has been in every case less costly than development of the same algorithm in sequential (that is, single-core, single process) C or C++, and an order of magnitude less costly than development of comparable parallel code. Moreover, SequenceL not only automatically parallelizes the code, but since it is based on CSP-NT, it is provably race free, thus eliminating the largest quality challenge the parallelized software developer faces.

Cooke, Daniel↗

DOE OSTI2018

Sociomarkers and biomarkers: predictive modeling in identifying pediatric asthma patients at risk of hospital revisits

The importance of social components of health has been emphasized both in epidemiology and public health. This paper highlights the significant impact of social components on health outcomes in a novel way. Introducing the concept of sociomarkers, which are measurable indicators of social conditions in which a patient is embedded, we employed a machine learning approach that uses both biomarkers and sociomarkers to identify asthma patients at risk of a hospital revisit after an initial visit with an accuracy of 66%. The analysis has been performed over an integrated dataset consisting of individual-level patient information such as gender, race, insurance type, and age, along with ZIP code-level sociomarkers such as poverty level, blight prevalence, and housing quality. Using this uniquely integrated database, we then compare the traditional biomarker-based risk model and the sociomarker-based risk model. A biomarker-based predictive model yields an accuracy of 65% and the sociomarkerbased model predicts with an accuracy of 61%. Without knowing specific symptom-related features, the sociomarker-based model can correctly predict two out of three patients at risk. We systematically show that sociomarkers play an important role in predicting health outcomes at the individual level in pediatric asthma cases. Additionally, by merging multiple data sources with detailed neighborhood-level data, we directly measure the importance of residential conditions for predicting individual health outcomes.

Shin, Eun Kyong↗

DOE OSTI2018

Associations between environmental quality and adult asthma prevalence in medical claims data

Highlights: • Asthma is a complex condition affecting 7.4% of U.S. adults. • Asthma may be driven by multiple exposures operating in tandem. • The Environmental Quality Index measures 5 environmental domains simultaneously. • Worsening overall environmental quality is associated with increasing asthma. • Patterns vary by domain (air, water, land, built, sociodemograhic) and rurality. As of 2014, approximately 7.4% of U.S. adults had current asthma. The etiology of asthma is complex, involving genetics, behavior, and environmental factors. To explore the association between cumulative environmental quality and asthma prevalence in U.S. adults, we linked the U.S. Environmental Protection Agency's Environmental Quality Index (EQI) to the MarketScan{sup ®} Commercial Claims and Encounters Database. The EQI is a summary measure of five environmental domains (air, water, land, built, sociodemographic). We defined asthma as having at least 2 claims during the study period, 2003–2013. We used a Bayesian approach with non-informative priors, implementing mixed-effects regression modeling with a Poisson link function. Fixed effects variables were EQI, sex, race, and age. Random effects were counties. We modeled quintiles of the EQI comparing higher quintiles (worse quality) to lowest quintile (best quality) to estimate prevalence ratios (PR) and credible intervals (CIs). We estimated associations using the cumulative EQI and domain-specific EQIs; we assessed U.S. overall (non-stratified) as well as stratified by rural-urban continuum codes (RUCC) to assess rural/urban heterogeneity. Among the 71,577,118 U.S. adults with medical claims who could be geocoded to county of residence, 1,147,564 (1.6%) met the asthma definition. Worse environmental quality was associated with increased asthma prevalence using the non-RUCC-stratified cumulative EQI, comparing the worst to best EQI quintile (PR:1.27; 95% CI: 1.21, 1.34). Patterns varied among different EQI domains, as well as by rural/urban status. Poor environmental quality may increase asthma prevalence, but domain-specific drivers may operate differently depending on rural/urban status.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Engaging a Diverse Workforce in the Building Sciences Through the JUMP Into STEM Program: Impact Study; Preprint

Ensuring inclusivity in building science professions requires engaging people from underrepresented demographics; unfortunately, many races, ethnicities, and genders continue to be underrepresented. The JUMP into STEM program works to rectify this, encouraging creative ideation and highlighting the unique perspectives of a diverse array of students. The top students are awarded internships that provide opportunities to work in building science research with close supervision from mentors in the field. In the research presented here, we investigate the impact of participation in JUMP into STEM on students' careers, including the impact on students from diverse backgrounds. Furthermore, we research students' awareness of career opportunities in building science, students' perception of their ability to meaningfully contribute to this field, and the career building opportunities that JUMP into STEM provides for students. Through participant interviews and data analysis, we measure program diversity, inclusion, and effectiveness at achieving goals. We find that among the hundreds of students who have participated in this program, more than 25 different majors and/or educational degree programs are represented and more than 45% of students attend minority serving institutions or historically black colleges and universities. The JUMP into STEM experience had a significant effect on career choices or career development for more than 80% of participants. Our results also indicate that the JUMP into STEM program is effective at promoting diversity in the building sciences and is successfully contributing to the larger effort within the building science industry to promote and ensure equity in technological progress and innovation.

building energy science↗