Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Availability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Status and Trends in the U.S. Voluntary Green Power Market (2021 Data)

This data book provides certain data behind figures and tables found in the NREL presentation "Status and Trends in the Voluntary Market (2021 Data)." These data reflect estimates based on the best available data. Excluded Data This data book excludes data for certain figures using confidential survey data or purchased data for which NREL does not own the rights. In particular, renewable energy certificate (REC) price data are not included in this data book Rounding: Some estimates may be slightly inconsistent across tabs due to estimate rounding Citation for the data: E. O'Shaughnessy and J. Heeter. 2022. Status and Trends in the Voluntary Market. Golden, CO: NREL. For more information: contact Jenny Heeter (jenny.heeter@nrel.gov). For more information on voluntary green power markets see NREL's resources at https://www.nrel.gov/analysis/green-power.html. Acronyms CCA Community choice aggregation MWh Megawatt hour PPA Power purchase agreement RECs Renewable energy certificate

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

An investigation into the potential for wind turbines to cause barotrauma in bats

The high rates of bat mortality caused by operating wind turbines is a concern for wind energy and wildlife stakeholders. One theory that explains the mortality is that bats are not only killed by impact trauma, but also by barotrauma that results from exposure to the pressure variations caused by rotating turbine blades. To date, no published research has calculated the pressure changes that bats may be exposed to when flying near wind turbines and then used these data to estimate the likelihood that turbines cause barotrauma in bats. To address this shortcoming, we performed computational fluid dynamics simulations of a wind turbine and analytical calculations of blade-tip vortices to estimate the characteristics of the sudden pressure changes bats may experience when flying near a utility-scale wind turbine. Because there are no data available that characterize the pressure changes that cause barotrauma in bats, we compared our results to changes in pressure levels that cause barotrauma and mortality in other mammals of similar size. This comparison shows that the magnitude of the low-pressures bats experience when flying near wind turbines is approximately 8 times smaller than the pressure that causes mortality in rats, the smallest mammal for which data are available. The magnitude of the high-pressures that bats may experience are approximately 80 times smaller than the exposure level that causes 50% mortality in mice, which have a body mass similar to several bat species that are killed by wind turbines. Further, our results show that for a bat to experience the largest possible magnitude of low- and high-pressures, they must take very specific and improbable flight paths that skim the surface of the blades. Even a small change in the flight path results in the bat being hit by the blade or experiencing a much smaller pressure change. Accordingly, if bats have a physiological response to rapid low- and high-pressure exposure that is similar to other mammals, we conclude that it is unlikely that barotrauma is responsible for a significant number of turbine-related bat fatalities, and that impact trauma is the likely cause of the majority of wind-turbine-related bat fatalities.

17 WIND ENERGY↗
DOE OSTI2023

Ab initio calculation of muon capture on 24 Mg

In this work we study ordinary muon capture (OMC) on 24 Mg from a first-principles perspective. Starting from a particular two- and three-nucleon interaction derived from chiral effective field theory, we use the valence-space in-medium similarity renormalization group (VS-IMSRG) framework to construct effective Hamiltonians and muon-capture operators, which nonperturbatively account for many-body physics outside the valence space. Here, the obtained nuclear matrix elements are compared against those from the phenomenological shell model. The impact of including the correlations from the nuclear shell model (NSM) as well as including the induced twobody part is studied in detail. Furthermore, the effects of realistic bound-muon wave function on the operators is studied. Finally, predictions for capture rates to the lowest excited states in 24 Na are given and compared with available data. It is found that the spectroscopic properties of 24 Mg and its OMC daughter 24 Na are fairly well described by both the NSM and VS-IMSRG, and that the effect of the hadronic two-body currents significantly reduces the OMC rates. Both models have some difficulties in matching the measured OMC rates, especially for the 2 + final states. This calls for further studies in other light nuclei with available OMC data.

20 ≤ A ≤ 38↗
DOE OSTI2026

DOE EV Data Collection - Charging Data

Charging data are collected from one of three sources, each with varying levels of additional information. These sources, in approximate order from most to least additional information, are: • The electric vehicle supply equipment (charger) • Onboard the vehicle itself • From a utility submeter. Many chargers provide software that allows for the collection and reporting of charging session data. If unavailable, data may be recorded by the charging vehicle’s onboard systems. If neither of these options is available, data can be acquired from utility submeters that simply track the energy flowing to one or more chargers. Data collected directly from the electric vehicle supply equipment (EVSE) are typically the most accurate and highest frequency. However, it is not always possible to discern which exact vehicle is being charged during any one session. EVSE-side data can be identified where a single charger ID but a range of vehicle IDs are present (e.g., CH001, EV001-EV005). Data collected from the vehicle’s onboard systems usually does not provide information on which exact charger is being used. Vehicle-side data can be identified where a single Vehicle ID but a range of Charger IDs are present (e.g., EV001, CH001-CH005). Data collected from utility submeters provide no information on which specific vehicle is charging or which specific charger is in use. Submeter data can be identified where multiple Vehicle IDs and multiple Charger IDs are present, but only a single Fleet ID is present (e.g., EV001-EV005, CH001-CH005, Fleet01). The **Charge Data Daily/Session Dictionaries** contains definitions for each available parameter collected as part of an individual charging session, aggregated at either a daily or session level. The parameters available will vary between vehicles and chargers. The **Charger Attributes** table contains specific charger characteristics, coded to at least one anonymous Charger ID and linked to either a single or a range of Vehicle IDs. Vehicle ID can be used as a key between charging data and vehicle attribute tables. The **Charger Attributes Data Dictionary** contains definitions for each available parameter collected on the physical and operational characteristics of the charging hardware itself. The **Vehicle Attributes Data Dictionary** contains definitions for each available parameter associated with a vehicle’s physical and functional attributes and fleet context. The **Vehicle Attributes** table contains specific vehicle characteristics, coded to an anonymous Vehicle ID. This Vehicle ID can be used as a key between vehicle data and vehicle attribute tables, and in cases where charging data are supplied, links a vehicle with the charger(s) that supplied it power. The **Charging Data** tables contain the data from each charger’s operations, coded to at least one anonymous Charger ID and linked to either a single or a range of Vehicle IDs. Vehicle ID can be used as a key between charging data and vehicle attribute tables. Data is being uploaded quarterly through 2023 and subject to change until the conclusion of the project.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Recommendations for Dose Selection for Adolescent Patients in Relevant Adult Oncology Clinical Trials

Our research supported the dose selection recommendations for adolescents in the US Food and Drug Administration (FDA) Guidance on Inclusion of Adolescent Patients in Adult Oncology Clinical Trials. The FDA Guidance states that for drugs administered as a flat dose in adults and data showing no clinically meaningful effect of body size on drug exposure and toxicity in adults, a minimum body weight threshold may need to be defined to prevent adolescents who have a lower body weight from exceeding adult exposures. Our review of adult population pharmacokinetic analyses of new molecular entities approved for oncology between January 2015 and March 2021 suggested that 40 kg (the approximate median body weight of a 12-year-old) is generally the lower end of the body weight range that has no clinically relevant effect on drug pharmacokinetics or safety. In conclusion, the minimum body weight threshold and selection of an appropriate dose for adolescents in relevant adult oncology clinical trials should ultimately be determined based on available data on pharmacokinetics or pharmacodynamics of the investigational drug with consideration of body size effect on drug exposure, toxicity, and efficacy data (if available), the therapeutic index of the drug, and dose- and exposure-response relationships in adults.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Specifications of Cladding Diameter Measurements Conducted at AGHCF

Fuel element diameter data was collected on-site at the Alpha-Gamma Hot Cell Facility (AGHCF) before and after out-of-pile furnace transient tests of fuel elements. Available data records have been collected and preserved in the Out-of-Pile Transient Database (OPTD). This data is used to determine the transient-induced changes in fuel element diameter, or cladding strain, for the Whole Pin Furnace (WPF) tests. Fuel element diameter was measured by contact profilometry along the length of the fuel pin at specified rotational orientations and/or by a manually operated micrometer at several discrete axial locations along the pin. The Alpha-Gamma Hot Cell Facility Operations Manual details the way the facility operated, organizational and oversight responsibilities, and procedures for examination of samples. The working version of the manual at the time of the whole pin furnace tests and the test pin examinations is Doc. No. IPS-2-00-00, dated June 1989. This specification was developed using the operations manual and recovered measurement records in consultation with subject matter experts (SMEs). The measurement methods, format of the available post-test examination (PTE) data, and recommended methods for use and interpretation of that data are summarized. Section 2 describes the available diameter measurement data for the WPF tests with guidance for interpretation and usage, and Section 3 describes the instrument measurement procedures and calibration methods.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Could on-site fuel storage economically reduce power plant-gas grid dependence in pipeline constrained areas like New England?

In the Northeastern United States, natural gas supply constraints have led to periods when gas shortages have caused up to a quarter of all unscheduled power plant outages. Dual fuel oil/gas generators or local gas storage might mitigate gas supply shortages. We use historical power plant operational and availability data to develop a supply curve of the costs required for generators to mitigate fuel shortage failures in New England. Based on 2012–2018 data, we find that the historical fuel shortages at approximately 2 GW worth of gas-fired capacity could be mitigated using on-site fuel storage. For comparison, New England’s average reserve margin was 1.7–2.8 GW over our sample period. Oil dual fuel plants would recoup their investment if compensated with a reliability adder of $\$ 3-7$/MWh during their normal operations, while $\$ 7-16$/MWh would incentivize using onsite, compressed natural gas storage. We estimate that the capital expenses associated with the fuel storage options would be less expensive than installing battery backup for resource adequacy at current battery prices.

03 NATURAL GAS↗
DOE OSTI2023

Mapping Inquiry Tool (MapIT) Database

The Mapping Inquiry Tool (MapIT) database consists of a geodatabase and data catalog of geologic, geophysical, structural, hydrologic, and contextual data, based on the data types to support geologic carbon storage activities and other subsurface energy systems resource assessments. The database was aggregated from publicly available data across the USA from state and federal entities. The database is structured by categories including rock unit geology, boundaries, national CS datasets, geophysical data, faults and structural data, infrastructure, surface hydrology, groundwater, and more. The data described in the data catalog is also available in the Mapping Inquiry Tool (https://edx.netl.doe.gov/dataset/mapping-inquiry-tool). Version 3 of the geodatabase and data catalog have been updated as of 5/17/2024. The database was published with a limited number of layers. The Catalog V3 contains many more resources than the geodatabase, documenting all layers that will be included in MapIT, and includes links to the original sources of the data. Within the catalog, in the final column, there is information about if the file is included in the geodatabase or not. Use the links provided in the catalog to download data directly from the original source if not included in the geodatabase. Four resources are included in this submission: 1. Geodatabase 2. ReadMe file 3. Catalog of data layers and additional data resources 4. Web link to a resource describing the motivation and reviewing the content of the geodatabase - DOE NETL Carbon Storage Site Mapping Inquiry Tool Database

carbon storage↗
DOE OSTI2020

Nuclear Data Sheets for A=98

Experimental spectroscopic data on nuclear structure and decay are evaluated for known nuclides of mass 98 (Br, Kr, Rb, Sr, Y, Zr, Nb, Mo, Tc, Ru, Rh, Pd, Ag, Cd, In). Detailed evaluation results of individual reactions and decays are presented together with the Adopted values that are recommended for level properties, γ and β radiations, and other spectroscopic information. 98 Mo remains as the most extensively studied nuclide via various reactions and decays. Level schemes of Sr, Y, Zr, Tc, and Pd nuclides in this mass chain are also well established to date; while Kr, Rb, Nb, Ag and Cd are amongst the least-studied ones for excited states, with only limited data available for each. On the neutron-rich side, 98 Br has been identified in the 9 Be(238U,F) reaction, but no spectroscopic data are yet available, while for 98 In on the proton-rich side, only the ground state and an isomer are known with half-lives measured but their spin-parities and the absolute level energy of the isomer yet to be determined. While 98 Ru and 98 Rh have also been extensively studied, large discrepancies exist between the high-spin sections of the proposed level schemes in different measurements, and these need to be clarified and resolved with further experimental investigations to improve the currently-adopted ones, which have been selected from the measurements with higher statistics, considering no other criteria of preference. Furthermore, this work supersedes all the earlier evaluations of A=98 (2003Si07, 1998Si18, 1992Si21, 1983Mu21, 1974Me34).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Examining the Impact of Data Layout on Tape on Data Recall Performance for ATLAS

Increases in data volumes are forcing high-energy and nuclear physics experiments to store more frequently accessed data on tape. Extracting the maximum performance from tape drives is critical to make this viable from a data availability and system cost standpoint. The nature of data ingest and retrieval in an experimental physics environment make achieving high access performance difficult given the inherent limitations of magnetic tape. Tailoring the layout of data on tape is one key to improving read performance. This paper highlights the work in progress to characterize ATLAS data ingested in the tape system, understand how data layout, i.e. file co-location on tape and file distribution over tapes, affect read performance and how optimal data layout might be achieved in a production environment.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2020

GradeIT (Road Grade Inference Tool)

The National Renewable Energy Laboratory (NREL) has developed the Road Grade Inference Tool, "GradeIT". This tool is a modular Python package the leverages the United States Geological Survey’s (USGS) 1/3 arc-second Digital Elevation Model (DEM), an open and free public dataset. Roadway gradient (slope) has a strong influence on vehicle energy consumption behavior and longitudinal dynamics. Therefore, any tools, models, or analyses that consider vehicle energy consumption or driving profiles is incomplete without accurate elevation and grade information. Despite the acute need for this data, it is rarely collected alongside GPS (latitude and longitude) data, and tools to post-process GPS data to append elevation and grade are difficult to come by. GradeIT satisfies this significant need in the research community. Utilization of the USGS DEM makes the underlying data available to any potential user and ensures continuous data anywhere in the continental United States. The USGS DEM is a great resource; however, in order to be useful for automotive and traffic engineering applications, significant interpolation and filtering is required to achieve an accurate representation of gradient on the roadway. GradeIT employs a two-dimensional interpolation to approximate elevation at a point on the road from the nearest nodes in the DEM. Then, GradeIT applies multiple filtering techniques to smooth the elevation profile to a realistic road topology. Finally, road grade is derived from the elevation profile and returned as the primary output.

Holden, Jacob↗
DOE OSTI2020

Calibration and modification of the constitutive model for the mechanical response of P91

The objective of this first milestone was to calibrate and if necessary, modify a constitutive model predicting the primary and secondary creep response of P91. The overall path to be followed consists of first calibrating this constitutive model against experimental data available from the literature (this milestone). In parallel, data acquired by indentation tests will be used to calibrate the model (this involves transforming the indentation data into equivalent uniaxial tests). An overall comparison of model parameters will allow assessing to what extent these rapid tests can be used to calibrate models predicting the overall mechanical response of the bulk. Given that COVID naturally hindered the gathering of new experimental data, the choice was made to ensure that LANL would have sufficient funds in year two to perform the bulk of the new calibration work. The following report details (i) how and which of the bulk experimental data was selected, (ii) constitutive model formulation, (iii) predictions of the constitutive model: effects of imposed stress, temperature and precipitate content, (iv) future work.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Nuclear data resources and initiatives for nuclear astrophysics

Research into the cosmic synthesis of the elements, the evolution and explosion of stars, the nature of the early Universe, and other important topics in nuclear astrophysics are at the forefront of nuclear science. These studies are motivating laboratory measurements and theoretical calculations that, after significant investments, are pushing the boundaries of what is possible. The latest nuclear results, however, must be specially prepared before they can be used to advance our knowledge of the cosmos. This processing requires a set of resources unique to nuclear astrophysics, and an impressive collection of nuclear reaction and nuclear structure datasets, processing codes, thermonuclear reaction rate libraries, and simulation codes and services have been developed for the field. There are, however, some serious challenges to these efforts that will only worsen in the future, making it important to develop strategies and act now to ensure a sustainable future for this work. After detailing the specific data types needed for nuclear astrophysics and the available data resources, the major challenges in this work and their implications are discussed. A set of initiatives are proposed to meet those challenges along with suggested implementations and possible ways that they may advance our understanding of the Universe and strengthen the field of nuclear astrophysics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

RTe3_data

The purpose of this dataset is to provide data availability for a research paper. It contains experimental data used to analyze and present the results discussed in the research paper.

Physics↗
DOE OSTI2021

State-of-the-Art Techniques for Large-Scale Stochastic Unit Commitment

Recent advances in deterministic unit commitment, both formulaic and algorithmic, along with modern algorithmic approaches for stochastic programming, have enabled the solution of stochastic unit commitment problems with hundreds of scenarios on large-scale transmission networks. In this presentation, we will give an overview of these methods, including lazy transmission constraint generation, lower-bounding techniques, and heuristics, all of which can be executed in concert with customized decomposition approaches for optimization under uncertainty. We demonstrate the effectiveness of these techniques on the TAMU Texas7K synthetic transmission network, leveraging realistic high-resolution forecasts based on NREL renewable resource availability data. The software leveraged for these demonstrations is available via the open-source software packages EGRET (for electrical grid optimization) and mpi-sppy (for optimization under uncertainty).

27 ARPA - Advanced Research Projects Agency-Energy↗
DOE OSTI2023

Baseline Characterization Database Verification Report - PCEA Billet 02S8-5

The purpose of this engineering calculations and analysis report (ECAR) is to present data collected in the Baseline Graphite Characterization Program, which is directly tasked with supporting the Idaho National Laboratory's (INL's) research and development efforts on the Advanced Reactor Technologies (ART) Program. This program populates a comprehensive database that reflects the baseline properties of nuclear-grade graphite regarding individual grade, billet, and position within individual billets. The physical- and mechanical-property information being collected will be transferred to the Nuclear Data Management and Analysis System (NDMAS), and that database will help populate the handbook of property data available to member nations of the Generation-IV International Forum. Transfer of these data from the applicable technical lead to the dissemination databases available to other end users requires a full review of the test procedures and data-collection efforts through an analysis of the multiple summary spreadsheets and values being collected. This report represents the analysis for PCEA Billet 02S8-5 and facilitates release of associated data to the NDMAS custodians.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗