SEARCH · Engineering Papers

Results for “Data Association”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

DOE OSTI2021

National Renewable Energy Laboratory, South Table Mountain Campus, Golden, Colorado

The National Renewable Energy Laboratory (NREL) South Table Mountain campus, located in Golden, Colorado, has multiyear datasets from buildings with approximately 1,100,000 sq ft of floor area. These 16 buildings include a large office, nine laboratories, and other education or public assembly facilities such as an education center, a warehouse, quick service restaurants, two site entrance security buildings, and a parking garage—all constructed and improved from 1982 to 2014. These datasets are also available from the NREL data storage and management platform SkySparks. The datasets contain electricity meter data (poser, voltage, and current) with 1-minute resolution and building automation system (BAS) data with resolutions of 5 or 15 minutes. Some subsystems (e.g., lighting) or equipment electricity data have the same intervals as above. Some mechanical equipment state or condition data, such as flow and temperature, are captured with 5- to 15-minute intervals. The types of measurement points (i.e., electrical meter power and zone temperature) and associated data quality across the campus are typical, which helps reduce the unreliability of data quality.

STM, Systems and equipment operational, Energy use↗

NASA NTRS1987

Airborne Doppler lidar observations of convective phenomena in Oklahoma

On 30 June 1981, the wind fields around a variety of convective clouds, ranging from large thunderstorm complexes to isolated cumulus congestus, were observed in Oklahoma using an airborne Doppler lidar operated by NASA. By steering the pulsed infrared laser beam alternately along differing horizontal directions, a network of independent radial velocity measurements is obtained, which permits high-resolution synthesis of the full horizontal wind vector field in a swath adjacent to the aircraft flight track. The bright reflections of the laser signal by cloud surfaces permit direct identification of the locus of cloud edges, information which is prerequisite to detailed study of the relationships between the winds inside and outside clouds. The horizontal wind fields derived from the lidar data reveal waves and vortices along the gust front of a storm which eventually produced a gust-front tornado, and cloud-scale convergence patterns around an isolated cumulus congestus. Despite the presence of some questionable data associated with undersampling and delayed recording of certain aircraft motion parameters, most of the lidar results appear consistent with cloud photographs made during the experiment, with surface meteorological data, with aircraft flight-level wind data, and with previous observational and theoretical work.

Mccaul, Eugene W., Jr.↗

NASA NTRS2018

A Survey of Methods for Computing Best Estimates of Endoatmospheric and Exoatmospheric Trajectories

Beginning with the mathematical prediction of planetary orbits in the early seventeenth century up through the most recent developments in sensor fusion methods, many techniques have emerged that can be employed on the problem of endo and exoatmospheric trajectory estimation. Although early methods were ad hoc, the twentieth century saw the emergence of many systematic approaches to estimation theory that produced a wealth of useful techniques. The broad genesis of estimation theory has resulted in an equally broad array of mathematical principles, methods and vocabulary. Among the fundamental ideas and methods that are briefly touched on are batch and sequential processing, smoothing, estimation, and prediction, sensor fusion, sensor fusion architectures, data association, Bayesian and non Bayesian filtering, the family of Kalman filters, models of the dynamics of the phases of a rocket's flight, and asynchronous, delayed, and asequent data. Along the way, a few trajectory estimation issues are addressed and much of the vocabulary is defined.

Bernard, William P.↗

DOE OSTI2023

Baseline Characterization Database Verification Report - PCEA Billet 02S8-5

The purpose of this engineering calculations and analysis report (ECAR) is to present data collected in the Baseline Graphite Characterization Program, which is directly tasked with supporting the Idaho National Laboratory's (INL's) research and development efforts on the Advanced Reactor Technologies (ART) Program. This program populates a comprehensive database that reflects the baseline properties of nuclear-grade graphite regarding individual grade, billet, and position within individual billets. The physical- and mechanical-property information being collected will be transferred to the Nuclear Data Management and Analysis System (NDMAS), and that database will help populate the handbook of property data available to member nations of the Generation-IV International Forum. Transfer of these data from the applicable technical lead to the dissemination databases available to other end users requires a full review of the test procedures and data-collection efforts through an analysis of the multiple summary spreadsheets and values being collected. This report represents the analysis for PCEA Billet 02S8-5 and facilitates release of associated data to the NDMAS custodians.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2023

Baseline Characterization Database Verification Report - PCEA Billet 01S8-9

The purpose of this engineering calculations and analysis report (ECAR) is to present data collected in the Baseline Graphite Characterization Program, which is directly tasked with supporting the Idaho National Laboratory's (INL's) research and development efforts on the Advanced Reactor Technologies (ART) Program. This program populates a comprehensive database that reflects the baseline properties of nuclear-grade graphite with regard to individual grade, billet, and position within individual billets. The physical- and mechanical-property information being collected will be transferred to the Nuclear Data Management and Analysis System (NDMAS), and that database will help populate the handbook of property data available to member nations of the Generation-IV International Forum. Transfer of these data from the applicable technical lead to the dissemination databases available to other end users requires a full review of the test procedures and data-collection efforts through an analysis of the multiple summary spreadsheets and values being collected. This report represents the analysis for PCEA Billet 01S8-9 and facilitates release of associated data to the NDMAS custodians.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2024

Baseline Characterization Database Verification Report ? NBG-17 Billet V104

The purpose of this report is to present data collected in the Baseline Graphite Characterization Program, which is directly tasked with supporting the Idaho National Laboratory’s (INL’s) research and development efforts on the Advanced Reactor Technologies (ART) Program. This program populates a comprehensive database that reflects the baseline properties of nuclear-grade graphite regarding individual grade, billet, and position within individual billets. The physical- and mechanical-property information being collected will be transferred to the Nuclear Data Management and Analysis System (NDMAS), and that database will help populate the handbook of property data available to member nations of the Generation-IV International Forum. Transfer of these data from the applicable technical lead to the dissemination databases available to other end users requires a full review of the test procedures and data-collection efforts through an analysis of the multiple summary spreadsheets and values being collected. This report represents the analysis for NBG-17 Billet V104 and facilitates release of associated data to the NDMAS custodians. Millions of raw data points have been collected during testing and quantification analyses for these billets. The summary scalar property values and supplementary traceability data are collected into comprehensive spreadsheets. Data sets are composed of single billets of graphite for any given grade, organized by mechanical test-specimen type, and further subdivided into individual spreadsheet tabs according to the specific test or evaluation being performed. A direct analysis of properties was not conducted, and this report does not provide information on the validity or performance characteristics of the graphite itself. Rather, this report is intended as a verification of the completeness of actual data collected in accordance with PLN-3467, “Baseline Graphite Characterization Plan: Electromechanical Testing,” [1] and PLN-3348 “Graphite Mechanical Testing” [2] and their representation of the measurement and test results with sole regard to the graphite billets under evaluation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2026

ECAR: Baseline Characterization Database Verification Report – PCEA Billet 01D3-35

The purpose of this engineering calculations and analysis report (ECAR) is to present data collected in the Baseline Graphite Characterization Program, which is directly tasked with supporting the Idaho National Laboratory’s (INL’s) research and development efforts on the Advanced Reactor Technologies (ART) Program. This program populates a comprehensive database that reflects the baseline properties of nuclear-grade graphite with regard to individual grade, billet, and position within individual billets. The physical- and mechanical-property information collected will be transferred to the Nuclear Data Management and Analysis System (NDMAS), and that database will help populate the handbook of property data available to member nations of the Generation-IV International Forum. Transfer of these data from the applicable technical lead to the dissemination databases available to other end users requires a full review of the test procedures and data-collection efforts through an analysis of the multiple summary spreadsheets and values being collected. This report represents the analysis for PCEA Billet 01D3-35 and facilitates release of associated data to the NDMAS custodians.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NASA NTRS2004

Aviation Communications Emulation Testbed

Aviation related applications that rely upon datalink for information exchange are increasingly being developed and deployed. The increase in the quantity of applications and associated data communications will expose problems and issues to resolve. NASA Glenn Research Center has prepared to study the communications issues that will arise as datalink applications are employed within the National Airspace System (NAS) by developing a aviation communications emulation testbed. The Testbed is evolving and currently provides the hardware and software needed to study the communications impact of Air Traffic Control (ATC) and surveillance applications in a densely populated environment. The communications load associated with up to 160 aircraft transmitting and receiving ATC and surveillance data can be generated in real time in a sequence similar to what would occur in the NAS.

Sheehe, Charles↗

NASA NTRS2004

Aviation Communications Emulation Testbed

Aviation related applications that rely upon datalink for information exchange are increasingly being developed and deployed. The increase in the quantity of applications and associated data communications will expose problems and issues to resolve. NASA s Glenn Research Center has prepared to study the communications issues that will arise as datalink applications are employed within the National Airspace System (NAS) by developing an aviation communications emulation testbed. The Testbed is evolving and currently provides the hardware and software needed to study the communications impact of Air Traffic Control (ATC) and surveillance applications in a densely populated environment. The communications load associated with up to 160 aircraft transmitting and receiving ATC and surveillance data can be generated in realtime in a sequence similar to what would occur in the NAS. The ATC applications that can be studied are the Aeronautical Telecommunications Network s (ATN) Context Management (CM) and Controller Pilot Data Link Communications (CPDLC). The Surveillance applications are Automatic Dependent Surveillance - Broadcast (ADS-B) and Traffic Information Services - Broadcast (TIS-B).

Sheehe, Charles↗

DOE OSTI2024

Extraction of Vibration Data with Imaging

To date, the primary sensing technology used to measure the vibration response has been accelerometers and strain gages mounted directly to the structure and using either wired or, more recently, wireless telemetry. Cost issues with these sensors and the associated data acquisition systems typically limit the numbers that are deployed on in situ structures. Although there are a few structures with larger sensing counts that in some cases exceed over 1000 sensors, more typical numbers range from ten to one hundred sensors resulting in low spatial resolution when they are applied to physically large systems. When one considers that nuclear power plant structures usually have complex geometries, material properties, connectivity and boundary conditions, it is clear these current approaches to vibration measurements can only provide limited information about a system’s dynamics response characteristics. As an alternative, many non-contact measurement technologies have emerged, including point wise measurement methods such as Global Positioning System (GPS), microwave interferometry, and laser Doppler vibrometry (LDV), as well as simultaneous full-field measurement methods such as electronic speckle pattern interferometry, holography interferometry, and muon tomography, some of which can provide high spatial resolution measurements. Among these methods, digital video imaging techniques have emerged as a feasible solution for full-field vibration measurements that provide significantly more detailed dynamic response information because every pixel becomes a measurement point. Furthermore, recent advances in image processing and computer vision algorithms have been successfully used to process video data for experimental and operational modal analysis. Such full-field measurements have the potential to significantly improve many current structural assessment procedures including system identification (modal parameter estimation), structural health monitoring, load reconstruction, model validation, and model updating. Furthermore, more recent full-field imaging techniques can be accomplished with relatively low-cost, commercially-available off-the-shelf cameras. However, these measurement procedures have other limitations that must be considered such as the ability to only measure visibly accessible points on a structure and a more limited dynamic range and bandwidth than can be achieved with accelerometers or strain gages.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2022

CO2 pipeline data catalog

This "Data Catalog" is an excel spreadsheet of collected and catalogued spatial and non-spatial public datasets in relevance to and support of CO2 transport (pipelines) infrastructure development and risk modeling. Includes data associated with CO2 sources, sinks, and transportation.

CO2↗

NASA NTRS2018

SAPS-Associated Explosive Brightening on the Duskside: A New Type of Onset- Like Disturbance

Quasi-periodic energetic particle injections have been observed at geosynchronous orbit on the dusk-side during a steady magnetospheric convection event. We examine high-resolution auroral imager data and ground magnetometer data associated with the first of these injections and conclude that it was not associated with classical sub-storm signatures. It is proposed that these injections are caused by the explosive nonlinear growth of a shear flow-ballooning instability in the region where sub-auroral polarization streams (SAPS) also occur. It is suggested that interchange will occur preferentially in the low-conductivity SAPS region since the magnetic Richardson number is lowest there and the "line-tying" effect will also be least stabilizing there. We propose that the observed particle injection signatures and auroral morphology constitute a new type of SAPS-associated explosive "onset-like" disturbance that can occur during intervals of strong convection.

Henderson, M. G.↗

DOE OSTI2024

Data and Scripts Associated with the Manuscript “Water Column Respiration in the Yakima River Basin is Explained by Temperature, Nutrients and Suspended Solids”

This data package is associated with the publication “Water Column Respiration in the Yakima River Basin is Explained by Temperature, Nutrients and Suspended Solids” published in EGU Biogeochemistry (Laan et al. 2025). In this research, water column respiration (ERwc) data, surface water chemistry data, organic matter (OM) chemistry data, and publicly available geospatial data were used in analysis to evaluate the variability in ERwc at 47 sites across the Yakima River basin in Washington, USA. In addition to this readme, this data package also includes a file-level metadata (FLMD) file that describes each file and a data dictionary (DD) that describes all column/row headers and variable definitions. The data package includes the data inputs, and outputs, and R scripts to reproduce all the analyses performed in the manuscript and create manuscript figures. The data package is comprised of three main folders (Code, Data, and Figures). The Code folder is comprised of four scripts and three analysis-specific subfolders that contain the R scripts to perform the analyses described in the publication and create publication figures. The Data folder is comprised of two “.csv” files and four subfolders that contain data input and output files. The Published_Data folder contains a readme that directs the user to download the appropriate files and add to this folder when using scripts. The Figures folder includes figures from the manuscript in “.pdf” and “.png” formats and a folder with intermediate figure files. This data package is associated with a GitHub repository which can be found at https://github.com/river-corridors-sfa/rcsfa-RC2-SPS-ERwc. We acknowledge the Yakama Nation as owners and caretakers of the lands where we collected some of these data. We thank the Confederated Tribes and Bands of the Yakama Nation Tribal Council and Yakama Nation Fisheries for working with us to facilitate sample collection and optimization of data usage according to their values and worldview.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Development of Monitoring Techniques for Binderjet Additive Manufacturing of Silicon Carbide Structures

The Transformational Challenge Reactor (TCR) program is leveraging additive manufacturing (AM) technologies to fabricate nuclear components to be assembled into a fully functional microreactor core. Compared with traditional manufacturing technologies, AM technologies allow (1) observation of the manufacturing process at a much higher resolution in real-time using in situ monitoring technologies to capture the sensor signature that scientifically describes each event occurring over time and space and (2) validation of the manufacturing process quality using domain-informed data analytics techniques as a potential qualification and certification methodology for the final component. This report provides an update on the program work on binder jetting in situ process monitoring and associated data analytics results, as well as sample placement and tracking for the subsequent chemical vapor infiltration (CVI) process. Examples are provided to illustrate the progress. Elements of the Digital Thread and data management are discussed in the main document, and an extensive supplemental material section is provided detailing the Digital Platform, as well as its implementation and components. In conclusion the path forward for the next fiscal year is discussed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

NASA NTRS1984

Navigation system and method

In a global positioning system (GPS), such as the NAVSTAR/GPS system, wherein the position coordinates of user terminals are obtained by processing multiple signals transmitted by a constellation of orbiting satellites, an acquisition-aiding signal generated by an earth-based control station is relayed to user terminals via a geostationary satellite to simplify user equipment. The aiding signal is FSK modulated on a reference channel slightly offset from the standard GPS channel. The aiding signal identifies satellites in view having best geometry and includes Doppler prediction data as well as GPS satellite coordinates and identification data associated with user terminals within an area being served by the control station and relay satellite. The aiding signal significantly reduces user equipment by simplifying spread spectrum signal demodulation and reducing data processing functions previously carried out at the user terminals.

Taylor, R. E.↗

NASA NTRS1989

Optimum data weighting and error calibration for estimation of gravitational parameters

A new technique was developed for the weighting of data from satellite tracking systems in order to obtain an optimum least-squares solution and an error calibration for the solution parameters. Data sets from optical, electronic, and laser systems on 17 satellites in GEM-T1 Goddard Earth Model-T1 (GEM-T1) were employed toward application of this technique for gravity field parameters. Also GEM-T2 (31 satellites) was recently computed as a direct application of the method and is summarized. The method employs subset solutions of the data associated with the complete solution to agree with their error estimates. With the adjusted weights the process provides for an automatic calibration of the error estimates for the solution parameters. The data weights derived are generally much smaller than corresponding weights obtained from nominal values of observation accuracy or residuals. Independent tests show significant improvement for solutions with optimal weighting. The technique is general and may be applied to orbit parameters, station coordinates, or other parameters than the gravity model.

Lerch, Francis J.↗

NASA NTRSDate not supplied

Zero Trust and Identity Access Management in Support of Service-Based Urban Air Mobility Applications

Urban Air Mobility environments will contain of a collection of service-based services, which will be typically hosted within cloud infrastructures. The underlying data for these UAM services will need to be secured. One approach to securing these UAM services would be to leverage the Zero Trust framework, that focuses on securing services and associated data, instead of securing the network. An early step in moving towards a Zero Trust framework is to standardize identity access manage support for an ever-widening set of services, where users must explicitly be granted access to each service.

UAM↗

DOE OSTI2024

Subsampling of Parametric Models with Bifidelity Boosting

Least squares regression is a ubiquitous tool for building emulators (a.k.a. surrogate models) of problems across science and engineering for purposes such as design space exploration and uncertainty quantification. When the regression data are generated using an experimental design process (e.g., a quadrature grid) involving computationally expensive models, or when the data size is large, sketching techniques have shown promise at reducing the cost of the construction of the regression model while ensuring accuracy comparable to that of the full data. However, random sketching strategies, such as those based on leverage scores, lead to regression errors that are random and may exhibit large variability. To mitigate this issue, we present a novel boosting approach that leverages cheaper, lower-fidelity data of the problem at hand to identify the best sketch among a set of candidate sketches. This in turn specifies the sketch of the intended high-fidelity model and the associated data. We provide theoretical analyses of this bifidelity boosting (BFB) approach and discuss the conditions the low- and high-fidelity data must satisfy for a successful boosting. In doing so, we derive a bound on the residual norm of the BFB sketched solution relating it to its ideal, but computationally expensive, high-fidelity boosted counterpart. Finally, empirical results on both manufactured and PDE data corroborate the theoretical analyses and illustrate the efficacy of the BFB solution in reducing the regression error, as compared to the nonboosted solution.

97 MATHEMATICS AND COMPUTING↗