Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DOSAGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Characterization of the Surface of Silver Ion-Implanted Silicon by Optical Reflectance

The optical reflection of the surface of silicon implanted with Ag{sup +} ions at low energy of 30 keV in a wide dosage range of 5.0·10{sup 14}–1.5·10{sup 17} ion/cm{sup 2} was studied in parallel with electron microscopy observation of the samples. It was found that with increasing ion dose of irradiation, the reflection intensity in the UV range of the Si spectrum decreases monotonically due to amorphization and macrostructuring of Si near-surface layer. In the long-wavelength region of the reflection spectra, a selective band with a maximum near 830 nm is recorded due to the plasmon resonance of ion-synthesized Ag nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Biodegradation of Poly(Aspartic Acid-Itaconic Acid) Copolymers by Miscellaneous Microbes from Natural Water

Poly(aspartic acid-itaconic acid) copolymers (PAI) is a new scale inhibitor for water treatment. Thus, it is necessary to investigate its biodegradability. The biodegradability of PAI was investigated through CO{sub 2} evolution tests under different conditions based on determination of carbon dioxide production. The investigation results showed that the degradation rate of PAI on day 10 and day 28 were respectively 38.7 and 79.5%, indicating that PAI was one kind of easily biodegradable scale inhibitors. With the increase in the content of itaconic acid in copolymerization process, the biodegradability of PAI was significantly reduced. In addition, the high biodegradability might be attributed to the existence of C–N bone-structure and more –COO–. Finally, Cu{sup 2+} could decrease the degradation percentage and the enzyme inhibition effect of Cu{sup 2+} was not the linear effect, but the “low-dosage effect”.

54 ENVIRONMENTAL SCIENCES↗

Adsorption Studies of Dimetridazole and Metronidazole onto Biochar Derived from Sugarcane Bagasse: Kinetic, Equilibrium, and Mechanisms

Biochar derived from sugarcane bagasse was prepared at different pyrolysis temperatures and holding times for adsorption of dimetridazole and metronidazole from aqueous solution. The optimal pyrolysis temperature and holding time were 500 °C and 120 min, respectively. The removal efficiencies of dimetridazole and metronidazole were 98.0% and 88.8%, respectively, at biochar dosage of 4.0 g L{sup −1} and solution temperature of 30 °C. Kinetics data were fitted by four kinetics models, and results indicated that adsorption was governed by pseudo-second-order kinetics. Adsorption is a multi-step process that involves film diffusion and pore filling. In addition, five isotherm models were employed to describe the adsorption equilibrium. Brunauer–Emmett–Teller model presented better fitting for the adsorption equilibrium, and the maximum adsorption capacities were 72.17 and 23.61 mg g{sup − 1} for dimetridazole and metronidazole, respectively. The calculated values of ΔG{sup 0} and ΔH{sup 0} indicated the non-spontaneous and exothermic nature of the adsorption process at the range of temperature studied. Thermodynamic studies also revealed that physical and chemical adsorptions were co-action. The adsorption mechanisms of dimetridazole and metronidazole onto biochar were mainly hydrogen bonding and π–π interaction. All the results revealed that sugarcane bagasse biochar can be used as alternative to costly adsorbents for the removal of dimetridazole and metronidazole from aqueous solution.

36 MATERIALS SCIENCE↗

Efficient Removal of Fluoride Using Polypyrrole-Modified Biochar Derived from Slow Pyrolysis of Pomelo Peel: Sorption Capacity and Mechanism

In this study, a novel adsorbent was developed by loading polypyrrole (PPy) onto biochar (BC) prepared by slow pyrolysis of pomelo peel. This PPy-grafted BC mainly exhibited anion-exchange behavior, which dramatically increased fluoride adsorption capacity. The effects of various factors (adsorbent dosage, pyrrole concentration, initial solution pH, co-existing anions and temperature) on the fluoride adsorption were investigated. The adsorbent was characterized by scanning electronic microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and automatic titration methods. Results showed that the optimized adsorbent (BP-0.1) performed excellently at pH 2.8–10.0, and possessed positive charge at pH < 8.6. The adsorption isotherm data were fitted well by the Langmuir model and the maximum adsorption capacity was 18.52 mg/g at 25 ± 2 °C. The adsorption kinetics followed the pseudo-second-order model and adsorption equilibrium was achieved at 24 h. Although both HCO{sub 3}{sup −} and CO{sub 3}{sup 2−} had great influence on F{sup −} adsorption, there was no significant impact in the presence of Cl{sup −}, NO{sub 3}{sup −} and SO{sub 4}{sup 2−}. Real groundwater study showed that 2.5 g/L of BP-0.1 could effectively reduce F{sup −} from 10.0 to 1.4 mg/L at pH 5.0. Thermodynamic parameters confirmed the spontaneous and endothermic nature of the adsorption process. Effect of pH, XPS analysis and the change of amount between Cl{sup −} and F{sup −} in the adsorption process revealed that ion exchange and electrostatic attraction were involved in the adsorption process and ion exchange was the main adsorption mechanism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A Novel Hyperbranched Polymeric Flocculant for Waste-Water Treatment

Cationic hyperbranched oligomer poly(N-acryloyl-1,2-diaminoethane hydrochloride) (HADE) was firstly synthesized by Michael addition reaction. And then, a series of cationic flocculants poly(acrylamide/N-acryloyl-1,2-diaminoethane hydrochlorides) (PAM-HADEs) with hyperbranched structure was prepared from HADE as macro-monomer and acrylamide (AM). The structures of PAM-HADEs were characterized by Fourier transform infrared spectrometry, {sup 1}H and {sup 13}C nuclear magnetic resonance spectroscopy, gel permeation chromatography (GPC) and matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF). And the properties were systematically evaluated by intrinsic viscosity, zeta potential and hydrodynamic radius. The mechanism of the cationic hyperbranched copolymer used in water treatment was extensively studied via a jar test in which the transmittance of the supernatant, settling time, and average floc size were used to evaluate the flocculability. Compared with the linear flocculant poly (acrylamide/liner-N-acryloyl-1,2-diaminoethane hydrochloride) (PAM-LADE), the novel hyperbranched polymeric flocculants exhibited outstanding flocculability which were reflected by shorter settlement time, high transmittance and large floc size. The primary cause that PAM-HADEs owned excellent flocculability is the more stretching configuration and less chains entanglement of PAM-HADEs in waste-water due to their hyperbranched structure compared with that of the linear PAM-LADE which exhibited curly coil configuration. On the other hand, abundant and exposed cationic terminal groups of PAM-HADEs originated from their hyperbranched structure also hint higher flocculation capacity. At optimum dosages of the polymer, the transmittance of the supernatant is less at low and high pH values, indicating that the natural pH (pH 7.29) of the suspension is the most appropriate pH for the flocculation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Novel Wastewater Treating Material: Cationic Poly Acrylamide/Diatomite Composite Flocculant

In this work, poly(methacrylatoethyl trimethyl ammonium chloride -co-acrylamide)/diatomite composite flocculant was synthesized via in situ polymerization in aqueous solution and applied in waste water treatment. The structure of composite flocculants was characterized by FT-IR, {sup 1}HNMR and XRD, TGA and viscometer. Herein, the apparent viscosity of composite flocculants was employed as comparison standard of their performance to evaluate the influence of the reaction parameters, such as monomer feeding ratio, diatomite mass fraction and polymerization temperature, etc. on their flocculation performance. And based on the above investigations, the optimum synthesis condition could be found. By comparing flocculation properties of composite flocculants with that of the conventional cationic flocculant, the dosage of composite flocculant that could make the transmittance of treated waste water exceed 95 % was only 7.5 ppm which was far lower than that of conventional flocculant (60–90 ppm). Meanwhile, the settling time was lower than 5 s which was similarly to that of conventional flocculant. Finally, the conclusion was that the composite flocculant owned higher absorption capacity and larger chain extending space than those of conventional linear flocculant due to the introduction of diatomite as backbone, which could make linear polymer chains free from entanglement and improve the flocculation capacity notably.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Application of Vitamin B{sub 1}-Coated Carbon Nanotubes for the Production of Starch Nanocomposites with Enhanced Structural, Optical, Thermal and Cd(II) Adsorption Properties

The objective of this investigation was to meliorate the physicochemical properties of corn starch-based polymeric nanocomposites (PNCs) by accommodating different levels of thiamine chloride assigned as vitamin B{sub 1} (VB)-treated carbon nanotubes (CNTs). The PNCs were acquired by solution casting method as a green method. The effect of CNTs@VB amounts on different properties of the PNCs including; hydrophilicity, structural properties, Cd(II) removal as well as optical traits was surveyed. Transmission electron microscope and field-emission scanning electron microscope images exposed that the CNTs@VB were fine distributed in the starch matrix. X-ray diffraction spectra of the PNCs displayed characteristic peak of the nanotube and also a decline in polymer crystallization after CNTs@VB incorporation. Compared with the intact starch, the PNCs indicated an improvement in thermal stability. The removal percentages of Cd(II) were amplified with raising adsorbent dosages to 0.08 g.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Preparation and Characterization of PVC Matrix Composites with Biochemical Sludge

Biochemical sludge (BS), generated in the waste water treatment of paper mills, was pretreated by enzyme hydrolysis. The effect and action mechanism of the enzymatic treatment on the properties of polyvinyl chloride (PVC) matrix composites with BS were discussed. Results showed that when the filler content was 30 wt%, the tensile strength of the PVC composites filled with BS and its modified products which were pretreated by laccase, cellulase and hemicellulase can be increased by 38.64, 67.4, 63.5 and 66.3% than the PVC composite filled with calcium carbonate. When the dosage of filler was 40 wt%, the elastic modulus of PVC composites filled with BS and its above three modified products decreased by 53.3, 52.3, 50.0 and 46.3%, respectively. Meanwhile, the thermal stability of PVC composites can also be improved at the temperature of over 340 °C. It can be concluded that the enzyme pretreatment can improve the application performance of BS usage in PVC matrix composites.

54 ENVIRONMENTAL SCIENCES↗

The Removal of Acid Violet 90 from Aqueous Solutions Using PANI and PANI/Clinoptilolite Composites: Isotherm and Kinetics

Polyaniline (PANI) and polyaniline/Gördes-clinoptilolite (PANI/GC) composite materials were synthesized by the chemical oxidative polymerization technique and used in the adsorption of Acid Violet 90 metal-complex dye (AV 90). The samples were characterized by X-ray diffractions, nitrogen adsorption–desorption isotherms, scanning electron microscopes and Fourier transform infrared. The effect of initial pH (2–8), sorbent dosage (0.5–4.0 g/L) and initial dye concentrations (50–400 mg/L) on adsorption onto PANI and PANI/GC were examined in a batch system. Langmuir, Freundlich and Temkin isotherm models were used to investigate the adsorption mechanism of AV 90 on PANI and PANI/GC. Langmuir isotherm model for PANI/GC and Freundlich isotherm model for PANI were fitted well with the experimental data. The highest dye uptake capacities were obtained with Langmuir isotherm model as 153.85 mg/g and 72.46 mg/g for PANI and PANI/GC, respectively. In order to determine the adsorption kinetics, pseudo first-order and second-order kinetic models were studied. As a result, the adsorption of AV 90 dye on PANI and PANI/GC was better identified with Pseudo second-order kinetic model than the first one.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Preparation and Dewatering Property of Two Sludge Conditioners Chitosan/AM/AA and Chitosan/AM/AA/DMDAAC

Two new chitosan-grafting copolymers (chitosan-g-PAM-AA and C-chitosan-g-PAM-AA) as sludge conditioners (flocculation and aggregation) have been prepared by employing ceric sulfate as a free radical initiator under nitrogen atmosphere in aqueous solution. The optimum condition for synthesizing chitosan-grafting copolymer was determined by orthogonal experiments. The structure, morphology and property of the obtained graft polymers were characterized by FT-IR, XRD, SEM, TGA and contact angle. Further, the municipal activated sludge dewatering performance of the synthesized copolymers was evaluated by the filter cake moisture content. Herein, the effects of pH value and dewatering temperatures of activated sludge, loading dosage or cationic degree of C-chitosan-g-PAM-AA on the filter cake moisture content were investigated. The synthesized amphoteric flocculant C-chitosan-g-PAM-AA showed a highly effective flocculation capability for activated sludge compared with chitosan-g-PAM-AA, chitosan, polyacrylamide (PAM). Also, the lowest filter cake moisture content was up to 61.41%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An Eco-friendly Porous Poly(imide-ether)s for the Efficient Removal of Methylene Blue: Adsorption Kinetics, Isotherm, Thermodynamics and Reuse Performances

Poly(imide-ether)s (PIEs), which is porous in nature, was synthesized using aromatic diamines and dianhydrides via the solution polycondenzation reaction. In the process, PIEs was used as an adsorbent for the removal of basic dye [Methylene blue (MB)] from the aqueous solution. The structure and the thermal stability of PIEs were characterized by FT-IR, {sup 1}H-NMR, XRD and TG analysis, and the adsorption behaviour of the PIEs was confirmed using UV/Visible, FT-IR and SEM with EDX analysis. Batch adsorption experiments were carried out and their parameters (pH 6.95), initial MB concentration (200 mg/L), adsorbent dosage (50 mg), contact time (120 min) and temperature (28 °C) were optimized. The batch adsorption experimental data of the effect of contact time, initial MB concentration and temperature were evaluated using the adsorption kinetics (Pseudo-first order, Pseudo-second order, Elovich and Intra-particle diffusion kinetic), isotherm (Langmuir, Freundlich, Redlich–Peterson and Sips isotherms) and thermodynamic models respectively. In the study, adsorption of MB onto PIEs followed Pseudo-second kinetics and found to be the best fitting model based on the obtained experimental data. The homogeneity and heterogeneity surface nature of PIEs were elucidated with two and three isotherm parameters respectively. The adsorption thermodynamic study indicates that the adsorption of MB onto PIEs was endothermic and spontaneous in nature. The adsorbed PIEs solid waste was utilized to prepare the polymer composite, and its property was characterized. Graphical Abstract: .

54 ENVIRONMENTAL SCIENCES↗

Equilibrium, Kinetic and Thermodynamic Studies on Methylene Blue Adsorption by Konjac Glucomannan/Activated Carbon Aerogel

Activated carbon (AC) is a common adsorbent used for the purification of aqueous solutions, yet its poor aqueous dispersion may negatively affects its practicability significantly. In the present study, the fabrication of an AC aerogel immobilized with konjac glucomannan (KGM/AC) for environmental protection was reported, and the parameters (e.g. AC content in aerogel, solution pH, adsorption duration, adsorption temperature and adsorbent dosage) were analyzed systematically using methylene blue (MB) as a model adsorbate. Further, to explore the adsorption equilibrium isotherm at equilibrium, the adsorption data were respectively fitted to Langmuir and Freundlich models, while kinetics study was conducted to explain the adsorption mechanism and predict the adsorption efficiency. Besides, the effect of temperature on the adsorption behavior was assessed using Van’t Hoff equation. According to the experimental and calculative results, the adsorption data at equilibrium could be well geared into the Langmuir model, and the adsorption kinetics behavior was better consistent with the pseudo-second-order expression as well as the intra-particle diffusion model. The Brunauer, Emmett and Teller surface area of KGM/AC aerogel was 352.44 m{sup 2}/g. KGM/AC aerogel exhibited the maximal capacity of adsorption of 416.67 mg/g at 323 K, and its adsorption behavior toward MB was endothermic and spontaneous in nature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Amino-Acid-Modified-Cashew Gum Flocculant: Synthesis, Characterization, and Application

Amphoteric poly(O-methacryloyl-L-serine)-grafted cashew gum (CG-g-P(SerMA)) flocculant was obtained with highly efficient in separation and sequential recovery of kaolin particles from aqueous suspension. The highest flocculation efficiency was achieved with a flocculant synthesized using an O-methacryloyl-L-serine:cashew gum molar ratio of 3:1. The CG-g-P(SerMA) at a dosage of 3.0 mg L{sup −1} resulted in a flocculation efficiency of more than 90% within 20 min for kaolin suspension. The efficiency, in standard experiments, the flocculant CG-g-P(SerMA) was superior to cashew gum and polyacrylamide-based commercial flocculants. The flocculation mechanism involves electrostatic interactions between the negatively charged surface of the kaolin and the protonated amino groups of the flocculant under acidic conditions. These results provide new opportunities and challenges for understanding and improving the removal of impurities present in water and wastewater.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Removal of Nitrate from Water by Alginate-Derived Carbon Aerogel Modified by Protonated Cross-Linked Chitosan

In this study, a carbonaceous aerogel with superior structural properties was synthesized from sodium alginate with a specific surface area and density of about 470 m{sup 2} g{sup −1} and 0.05 g cm{sup −3}, respectively. In order to adsorb nitrate from water, the surface of the aerogel was modified by protonated cross-linked chitosan. To investigate the morphology, elemental composition, crystalline phases and surface functional groups of the adsorbent, various techniques such as field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction analysis, Fourier transform infrared spectroscopy were employed. To study the performance of this green adsorbent in nitrate removal process, the effect of nitrate initial concentration, adsorbent dosage, pH of solutions were investigated in batch mode. It was revealed that the Langmuir isotherm model could properly describe the experimental equilibrium data and the maximum adsorption capacity was evaluated to be about 18 mg g{sup −1} at neutral pH and room temperature. Besides, the kinetic data perfectly followed the pseudo-second order model. Thermodynamic analysis showed that the adsorption reaction was spontaneous, exothermic with decreased randomness at the solid–liquid interface. The macroscopic size of the adsorbent allowed its facile separation from the solution.

36 MATERIALS SCIENCE↗

Cu(II) Sorption Performance of Novel Chitosan/Ter-(vinyl pivalate-maleic anhydride-N-tert-butylacrylamide) Microcapsules

In this study, first, the ter-polymerization reaction between vinyl pivalate (VP), maleic anhydride (MA), and N-tert-butylacrylamide (NTBA) was done in inert atmosphere (N{sub 2}). FT-IR and {sup 1}HNMR spectroscopy was applied to study the chemical composition of the obtained ter-polymers. MA content of the ter-polymers was determined by following the chemical titration method. Second, novel chitosan/ter-(vinyl-pivalate-maleic-anhydride-N-tert-butylacrylamide) microcapsules were synthesized. In microcapsule production, chitosan polymer served as a matrix for acrylamide ter-polymers with four different molar ratios. The microcapsules were characterized by FT-IR and SEM analyses. Cu(II) sorption efficiency of the microcapsules were tested at different pH levels, temperature, sorbent dosage, and metal ion concentration. Comparison with blank chitosan microbeads revealed that incorporation of acrylamide ter-polymers into the cross-linked chitosan matrix increased the metal sorption. Sorption capacities of the sorbents were recorded; blank chitosan microbeads: 67.03 mg g{sup −1}, and chitosan/acrylamide ter-polymer microcapsules: in range of 75.39–98.64 mg g{sup −1}. The findings demonstrated chitosan/acrylamide ter-polymer microcapsules can be utilized in sorption of Cu(II) ions in water treatment.

36 MATERIALS SCIENCE↗

Trends in Light and Temperature Sensitivity Recommendations among Licensed Biotechnology Drug Products

Inherent structural and functional properties of biotechnology-derived therapeutic biologics make them susceptible to light- and temperature-induced degradation and consequently can influence their quality. Photosensitivity of therapeutic proteins continues to be examined, but the commonalities and trends of storage conditions and information about light and temperature sensitivity among currently licensed therapeutic proteins has not been previously surveyed. Using a comprehensive and relational database approach, we conducted a scientific survey of all licensed biotechnology-derived drug products with the goal of providing evidence-based information about recommended storage conditions of formulations sorted by light- and temperature-related attributes as described for each product at licensure. We report the prevalence of indications for light and temperature sensitivity in formulations categorized by their presentation type, number of doses, container type, dosage form and active molecule type. We also report the storage temperature range across formulations and diluents for reconstitution and dilution. Formulations with excipients that potentially facilitate light-induced and thermal degradation were also noted. The result of our analysis indicates that light and temperature sensitivity are prevalent across therapeutic protein formulations. However, when a formulation is reconstituted or diluted, both light and temperature sensitivity are less clear. In addition, light and temperature sensitivity are more well defined in liquid formulations than lyophilized powder formulations, and more well defined in products manufactured in autoinjectors, prefilled-syringes, and pens than products in vials. Overall, our report provides a data-driven summary of storage conditions among therapeutic protein formulations to support the development of future biologic drug products.

60 APPLIED LIFE SCIENCES↗

Sulfur Removal by Adding Iron During the Digestion Process of High-sulfur Bauxite

This paper proposes a novel approach to sulfur removal by adding iron during the digestion process. Iron can react with high-valence sulfur (S{sub 2}O{sub 3}{sup 2−}, SO{sub 3}{sup 2−}, SO{sub 4}{sup 2−}) to generate S{sup 2−} at digestion temperature, and then S{sup 2−} enter red mud in the form of Na{sub 3}FeS{sub 3} to be removed. As iron dosage increases, high-valence sulfur concentration decreases, but the concentration of S{sup 2−} increases; sulfur digestion rate decreases while sulfur content in red mud markedly increases; the alumina digestion rate, conversely, remains fairly stable. So sulfur can be removed completely by adding iron in digestion process, which provide a theoretical basis for the effective removal of sulfur in alumina production process.

36 MATERIALS SCIENCE↗

Sulfidation and Sulfur Fixation of Jarosite Residues During Reduction Roasting

This study investigated the sulfidation and sulfur fixation of jarosite residues during reduction roasting in the presence of carbon. The effects of roasting temperature and carbon dosage were investigated based on thermodynamic calculation. The results indicated that more than 98 pct of zinc contained in the residue was converted into zinc sulfides, and more than 91 pct of sulfur was fixed in the roasted residue. Carbon addition promoted not only the sulfidation of zinc but also the fixation of sulfur, thereby eliminating SO{sub 2} emission. The growth of sulfide particles was strongly influenced by roasting temperature. The size of sulfide particles significantly increased when the temperature was above 1173 K (900 °C) because of the formation of a liquid phase during the roasting process. However, high temperature could increase the consumption of carbon powder.

36 MATERIALS SCIENCE↗