Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CuO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Magnetism and superconductivity of some Tl-Cu oxides

Many copper oxide based Thallium compounds have now been discovered. In comparison to the Bi-compounds, the Tl-system shows a richer diversity; viz., High Temperature Superconductors (HTSC) can be obtained with either one or two Tl-0 layers (m = 1,2); also, the triple-digit phases are easier to synthesize. The value of d, oxygen stoichiometry, is critical to achieving superconductivity. The Tl system is robust to oxygen loss; Tl may be lost or incorporated by diffusion. A diffusion coefficient equal to 10 ms at 900 C was determined. Both ortho-rhombic and tetragonal structures are evidenced, but HTSC behavior is indifferent to the crystal symmetry. This system has the highest T(sub c) confirmed. T(sub c) generally increases with p, the number of CuO layers, but tends to saturate at p = 3. Zero resistance as high as 125K has been observed. Most of these HTSC's are hole type, but the Ce-doped specimens may be electronic. The magnetic aspects were studied; because in addition to defining the perfectly diamagnetic ground state as in the conventional superconductors, magnetism of the copper oxides show a surprising variety. This is true of both the normal and the superconducting states. Also, due to the large phonon contribution to the specific heat at the high T(sub c) accurate thermal measurement of important parameters such as the sp. heat jump, electronic density of states, D(Ef) and coherence length are uncertain, and thus, are estimated from the magnetic results. Results from the Tl-system CuO, LaBaCuO, 120 and the Bi-CuO compounds are discussed. The emphasis is on the role of magnetism in the TlCuO HTSC, but technological aspects are also pointed out.

Datta, Timir↗
NASA NTRS1991

Ternary and quaternary oxides of Bi, Sr and Cu

Before the discovery of superconductivity in an oxide of Bi, Sr, and Cu, the system Bi-Sr-Cu-O had not been studied, although several solid phases had been identified in the two-component regions of the ternary system Bi2O3-Si-O-CuO. The oxides Sr2CuO3, SrCu2O2, SrCuO2, and Bi2CuO4 were then well known and characterized, and the phase diagram of the binary system Bi2O3-SrO had been established in the temperature range 620 to 1000 C. Besides nine solutions of compositions Bi(2-2x) Sr(x) O(3-2x) and different symmetries, this diagram includes three definite compounds of stoichiometries Bi(2)BrO4. Bi2Sr2O5, and Bi2Sr3O6 (x - 0.50, 0.67 and 0.75 respectively), only the second of which with known unit-cell of orthorhombic symmetry, dimensions (A) a = 14.293(2), b = 7.651(2), c = 6.172(1), and z = 4. The first superconducting oxide in the system Bi-Sr-Cu-O was initially formulated as Bi2Sr2Cu2O(7+x), with an orthorhombic unit-cell of parameters (A) a = 5.32, b = 26.6, c = 48.8. In a preliminary study the same oxide was formulated with half the copper content, Bi(2)Sr(2)CuO(6+x), and index its reflections assuming an orthorhombic unit-cell of dimensions (A) a = 5.390(2), b = 26.973(8), c = 24.69(4). Subsequent studies by diffraction techniques have confirmed the composition 2:2:1. A new family of oxygen-deficient perovskites, was characterized, after identifying by x ray diffraction the phases present in the products of thermal treatments of about 150 mixtures of analytical grade Bi2O3, Sr(OH)2-8H2O and CuO at different molar ratios. X ray diffraction data are presented for some other oxides of Bi and Sr, as well as for various quaternary oxides, among them an oxide of Bi, Sr, and Cu.

Casais, M. T.↗
NASA NTRS1999

A Hydrazine Leak Sensor Based on Chemically Reactive Thermistors

Leaks in the hydrazine supply system of the Shuttle APU can result in hydrazine ignition and fire in the aft compartment of the Shuttle. Indication of the location of a leak could provide valuable information required for operational decisions. WSTF has developed a small, single use sensor for detection of hydrazine leaks. The sensor is composed of a thermistor bead coated with copper(II) oxide (CuO) dispersed in a clay or alumina binder. The CuO-coated thermistor is one of a pair of closely located thermistors, the other being a reference. On exposure to hydrazine the CuO reacts exothermically with the hydrazine and increases the temperature of the coated-thermistor by several degrees. The temperature rise is sensed by a resistive bridge circuit and an alarm registered by data acquisition software. Responses of this sensor to humidity changes, hydrazine concentration, binder characteristics, distance from a liquid leak, and ambient pressure levels as well as application of this sensor concept to other fluids are presented.

Davis, Dennis D.↗
NASA NTRS2008

Novel Carbon Dioxide Microsensor Based on Tin Oxide Nanomaterial Doped With Copper Oxide

Carbon dioxide (CO2) is one of the major indicators of fire and therefore its measurement is very important for low-false-alarm fire detection and emissions monitoring. However, only a limited number of CO2 sensing materials exist due to the high chemical stability of CO2. In this work, a novel CO2 microsensor based on nanocrystalline tin oxide (SnO2) doped with copper oxide (CuO) has been successfully demonstrated. The CuO-SnO2 based CO2 microsensors are fabricated by means of microelectromechanical systems (MEMS) technology and sol-gel nanomaterial-synthesis processes. At a doping level of CuO: SnO2 = 1:8 (molar ratio), the resistance of the sensor has a linear response to CO2 concentrations for the range of 1 to 4 percent CO2 in air at 450 C. This approach has demonstrated the use of SnO2, typically used for the detection of reducing gases, in the detection of an oxidizing gas.

Xu, Jennifer C.↗
DOE OSTI2020

Orbital Hybridization and Magnetic Coupling at Cuprate–Manganite Interfaces Driven by Manganite Doping

Fundamental understanding of interface mechanisms that generate unexpected physical properties in the cuprate/manganite heterostructures is essential for possible applications as spintronic devices. In this study, CaCuO 2 /La 1–x Sr x MnO 3 (CCO/LSMO) superlattices are investigated, where the infinite-layer cuprate CCO does not have apical oxygen for Cu in the Ca-plane so that the Mn–O–Cu superexchange coupling can be only present at the MnO 2 –(La,Sr)O–CuO 2 interface. Two different doping states for the manganites are studied, namely x = 0.1 and x = 0.3, corresponding to the ferromagnetic insulating and ferromagnetic metallic states, respectively, in the manganite phase diagram. Linear and circular dichroism in X-ray absorption by synchrotron radiation at Cu and Mn L-edges clearly demonstrate that in the absence of apical oxygen in the cuprate block, the magnetic coupling between the LSMO and CCO is weakly ferromagnetic when LSMO is metallic, while it is antiferromagnetic when LSMO is insulating, along with an increased Cu 3d(3z 2 –r 2 ) and Mn 3d(3z 2 –r 2 ) orbital occupation. It is proposed that the Mn 3d valence band upward shift driven by the enhancement of Mn 3+ content in the underdoped sample enhances the orbital hybridization. The stronger hybridization at the interface MnO 2 –(La,Sr)O–CuO 2 gives rise to the antiferromagnetic coupling between cuprate and underdoped manganite.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Atomic Dynamics of Multi‐Interfacial Migration and Transformations

Redox-induced interconversions of metal oxidation states typically result in multiple phase boundaries that separate chemically and structurally distinct oxides and suboxides. Directly probing such multi-interfacial reactions is challenging because of the difficulty in simultaneously resolving the multiple reaction fronts at the atomic scale. Using the example of CuO reduction in H 2 gas, a reaction pathway of CuO → monoclinic m-Cu 4 O 3 → Cu 2 O is demonstrated and identifies interfacial reaction fronts at the atomic scale, where the Cu 2 O/m-Cu 4 O 3 interface shows a diffuse-type interfacial transformation; while the lateral flow of interfacial ledges appears to control the m-Cu 4 O 3 /CuO transformation. Together with atomistic modeling, it is shown that such a multi-interface transformation results from the surface-reaction-induced formation of oxygen vacancies that diffuse into deeper atomic layers, thereby resulting in the formation of the lower oxides of Cu 2 O and m-Cu 4 O 3 , and activate the interfacial transformations. In conclusion, these results demonstrate the lively dynamics at the reaction fronts of the multiple interfaces and have substantial implications for controlling the microstructure and interphase boundaries by coupling the interplay between the surface reaction dynamics and the resulting mass transport and phase evolution in the subsurface and bulk.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Copper Tantalate by a Sodium-Driven Flux-Mediated Synthesis for Photoelectrochemical CO 2 Reduction

Copper-tantalate, Cu 2 Ta 4 O 11 (CTO), shows significant promise as an efficient photocathode for multi-carbon compounds (C 2+ ) production through photoelectrochemical (PEC) CO 2 reduction, owing to its suitable energy bands and catalytic surface. However, synthesizing CTO poses a significant challenge due to its metastable nature and thermal instability. In this study, this challenge is addressed by employing a flux-mediated synthesis technique using a sodium-based flux to create sodium-doped CTO (Na-CTO) thin films, providing enhanced nucleation and stabilization for the CTO phase. To evaluate the PEC performance and catalytic properties of the films, copper(II) oxide (CuO) at the Na-CTO surface is selectively etched. The etched Na-CTO shows a lower dark current, with decreased contribution from photocorrosion, unlike the non-etched Na-CTO which has remaining CuO on the surface. Furthermore, Na-CTO exhibits 7.3-fold ethylene selectivity over hydrogen, thus highlighting its promising potential as a photocathode for C 2+ production through PEC CO 2 reduction.

copper tantalate↗
DOE OSTI2025

Quasiparticle description of angle-resolved photoemission spectroscopy for SrCuO 2

SrCuO 2 has long been considered a near-archetypal realization of a quasi-one-dimensional (1D) system of interacting electrons with short-range interactions. Within this framework, experimental observations - interpreted through the lens of the 1D Hubbard model - suggest that electron and hole excitations decay into two types of (unphysical) collective bosonic modes: "spinons", which carry the spin degree of freedom, and "holons", which carry the charge degree of freedom. This model, known as spin-charge separation, is most directly evidenced by angle-resolved photoemission spectroscopy (ARPES), where a photo-induced hole decays into a continuum of these excitations. Here we present an alternative perspective grounded in first-principles, self-consistent, and parameter-free many-body perturbation theory. In this revised quasiparticle framework, ARPES can be understood as a one-body effect arising from mild disorder in a long-range antiferromagnetic ground state. the emergence of the so-called spinon branch arises naturally from spin disorder, the anomalous linewidths are accurately captured, and we provide a compelling explanation for the spectral weight observed at the non-magnetic zone boundary. This reinterpretation provides a unified explanation for key experimental signatures previously attributed to spin-charge separation, including features observed in optical conductivity. Additionally, we show that SrCuO 2 exhibits a nontrivial interchain coupling that significantly influences both its one-particle and two-particle spectral functions. By comparing the spectral features of SrCuO 2 with those of La 2 CuO 4 , we argue that SrCuO 2 shares notable similarities with the two-dimensional cuprates-both being rooted in a common CuO 4 plaquette-based molecular orbital framework.

1D cuprates↗
DOE OSTI2023

ZnO/CuO nanostructures anchored over Ni/Cu tubular films via pulse electrodeposition for photocatalytic and antibacterial applications

In this work, we report the fabrication of Ni and Cu tubular substrates and the synthesis of ZnO/CuO nanocomposite on them through the process of pulse electrodeposition. The systematic variation in CuO incorporation in the ZnO matrix and the processing technique were noticed to affect the structural, optical, photocatalytic, and anti-bacterial properties, which are well in accordance with the Field Emission-Scanning Electron Microscope, X-ray Diffraction, Fourier transform Infrared Spectroscopy and UV-Differential reflectance spectroscopy results. The remediation capabilities of the photocatalytic substrates were assessed through the degradation of methylene blue (MB) dye under solar irradiation. Optimized CuO incorporation within the ZnO nanorods resulted in the degradation of a 20 ppm of MB dye solution within 40 min and a higher concentration of 50 ppm within 95 min. The Ni and Cu electroformed tubes as substrates provided not only a reusable supporting frame but also a large surface-area for the growth of ZnO/CuO nanocomposite. The current study also dealt with the anti-bacterial efficacy of the above-mentioned substrates against E.coli. Hence, the Ni and Cu tubular thin film substrates with nanorods of ZnO/CuO composite were explored for the removal of organic as well as biological contaminants from waste water.

36 MATERIALS SCIENCE↗
DOE OSTI2020

H 2 Pc and pentacene on Cu(110)-(2×1)O: A combined STM and nc-AFM study

Scanning tunneling microscopy (STM) and non-contact atomic force microscopy (nc-AFM) with a CuO tip is used to investigate adsorption of metal-free phthalocyanine (H 2 Pc) and pentacene on the Cu(110)-(2×1)O striped-phase reconstructed surface. We show that the combination of STM and nc-AFM is necessary to reveal the detailed adsorption geometry, necessary for interpreting the observed STM contrast. Comparison of the nc-AFM images with simulations shows that some of the H 2 Pc molecules are deformed out-of-plane on this surface, while pentacene retains its molecular geometry regardless of adsorption site. Our research highlights how the stiffness of CuO tips makes it possible to probe the structure of organic semiconductor / metal interfaces.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Hydroxyls on CeO 2 Support Promoting CuO/CeO 2 Catalyst for Efficient CO Oxidation and NO Reduction by CO

Transition metal catalysts, such as copper oxide, are more attractive alternatives to noble metal catalysts for emission control due to their higher abundance, lower cost, and excellent catalytic activity. Here, in this study, we report the preparation and application of a novel CuO/CeO 2 catalyst using a hydroxyl-rich Ce(OH) x support for CO oxidation and NO reduction by CO. Compared to the catalyst prepared from a regular CeO 2 support, the new CuO/CeO 2 catalyst prepared from the OH-rich Ce(OH) x (CuO/CeO 2 –OH) showed significantly higher catalytic activity under different testing conditions. The effect of OH species in the CeO 2 support on the catalytic performance and physicochemical properties of the CuO/CeO 2 catalyst was characterized in detail. It is demonstrated that the abundant OH species enhanced the CuO x dispersion on CeO 2 , increased the CuO x –CeO 2 interfaces and surface defects, promoted the oxygen activation and mobility, and boosted the NO adsorption and dissociation on CuO/CeO 2 –OH, thus contributing to its superior catalytic activity for both CO oxidation and NO reduction by CO. These results suggest that the OH-rich Ce(OH) x is a superior support for the preparation of highly efficient metal catalysts for different applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Reduction-Controlled Atomic Migration for Single Atom Alloy Library

Here, picturing the atomic migration pathways of catalysts in a reactive atmosphere is of central significance for uncovering the underlying catalytic mechanisms and directing the design of high-performance catalysts. Here, we describe a reduction-controlled atomic migration pathway that converts nanoparticles to single atom alloys (SAAs), which has remained synthetically challenging in prior attempts due to the elusive mechanism. We achieved this by thermally treating the noble-metal nanoparticles M (M = Ru, Rh, Pd, Ag, Ir, Pt, and Au) on metal oxide (CuO) supports with H2/Ar. Atomic-level characterization revealed such conversion as the synergistic consequence of noble metal-promoted H2 dissociation and concomitant CuO reduction. The observed atomic migration pathway offers an understanding of the dynamic mechanisms study of nanomaterials formation and catalyst design.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Structural and Chemical Evolution of an Inverse CeO x /Cu Catalyst under CO 2 Hydrogenation: Tunning Oxide Morphology to Improve Activity and Selectivity

Small nanoparticles of ceria deposited on a powder of CuO display a very high selectivity for the production of methanol via CO 2 hydrogenation. CeO 2 /CuO catalysts with ceria loadings of 5%, 20%, and 50% were investigated. Among these, the system with 5% CeO x showed the best catalytic performance at temperatures between 200 and 350 °C. The evolution of this system under reaction conditions was studied using a combination of environmental transmission electron microscopy (E-TEM), in situ X-ray absorption spectroscopy (XAS), and time-resolved X-ray diffraction (TR-XRD). For 5% CeO x /Cu, the in situ studies pointed to a full conversion of CuO into metallic copper, with a complete transformation of Ce 4+ into Ce 3+ . Images from E-TEM showed drastic changes in the morphology of the catalyst when it was exposed to H 2 , CO 2 , and CO 2 /H 2 mixtures. Under a CO 2 /H 2 feed, there was a redispersion of the ceria particles that was detected by E-TEM and in situ TR-XRD. Finally, these morphological changes were made possible by the inverse oxide/metal configuration and facilitate the binding and selective conversion of CO 2 to methanol.

03 NATURAL GAS↗
DOE OSTI2020

Applying Configurational Complexity to the 2D Ruddlesden–Popper Crystal Structure

The layered Ruddlesden–Popper crystal structure can host a broad range of functionally important behaviors. In this work, we establish extraordinary configurational disorder in a layered Ruddlesden–Popper (RP) structure using entropy stabilization assisted synthesis. A protype A 2 CuO 4 RP cuprate oxide with five cations on the A-site sublattice is designed and fabricated into epitaxial single crystal films using pulsed laser deposition. When grown on a near lattice matched substrate, the (La 0.2 Pr 0.2 Nd 0.2 Sm 0.2 Eu 0.2 ) 2 CuO 4 film features a T'-type RP structure with uniform A-site cation mixing and square-planar CuO4 units. These observations are made with a range of combined characterizations using X-ray diffraction, atomic-resolution scanning transmission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray absorption spectroscopy measurements. It is further found that heteroepitaxial strain plays an important role in crystal phase formation during synthesis. Compressive strain over ~1.5% results in the formation of a non-RP cubic phase consistent with a Cu X 2O 4 spinel structure. The ability to manipulate configurational complexity and move between 2D layered RP and 3D cubic crystal structures in cuprate and related materials promises to enable flexible design strategies for a range of functionalities, such as magnetoresistance, unconventional superconductivity, ferroelectricity, catalysis, and ion transport.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Crystalline 1D Coordination Polymer Inhibitor Layer Leads to Vertical Sidewalls in Selectively Deposited ZnO on Nanoscale Patterns

Area-selective atomic layer deposition (AS-ALD) is a promising technique for the fabrication of next-generation nanoelectronics. There are two main challenges in AS-ALD: (1) achieving high selectivity of deposition on the growth regions, and (2) preventing mushrooming of the growth material onto the nongrowth regions and achieving well-defined interfaces. In this work, we use benzenethiol (BT) as an inhibitor in the selective deposition of ZnO on SiO 2 in the presence of copper with and without a native oxide (Cu/CuO x ). We observe that BT forms a monolayer on the Cu surface and a Cu-thiolate multilayer structure on CuO x . Using grazing incidence X-ray diffraction combined with simulations, we find that the multilayer structure is crystalline and composed of 1D coordination polymers of Cu-thiolate. Here, using ellipsometry and X-ray photoelectron spectroscopy, we show that the BT consumes the entirety of the CuO x during multilayer formation, allowing the multilayer thickness to be tuned by the thickness of the original oxide. Both the monolayer BT and the multilayer BT prove to be effective inhibitors of ZnO ALD, blocking nearly 500 ALD cycles, which is more than twice that achieved with other thiol inhibitors. Finally, we demonstrate that the multilayer structure can prevent mushrooming of the ALD material onto the nongrowth surface of nanoscale patterns, creating vertical sidewalls with well-defined material interfaces and providing excellent pattern transfer, even for a relatively thick deposited film. As such, these results demonstrate that BT is not only an effective inhibitor but also that its ability to form tunable multilayers makes it well-suited for highly precise nanopatterning applications.

Layers↗
DOE OSTI2020

Machine-Learning-Assisted Synthesis of Polar Racemates

Racemates have recently received attention as nonlinear optical and piezoelectric materials. We report a machine-learning-assisted composition space approach was applied to synthesize the missing M = Ti, Zr members of the Δ,Λ-[Cu(bpy) 2 (H 2 O)] 2 [MF 6 ] 2·3 H 2 O (M = Ti, Zr, Hf; bpy = 2,2'-bipyridine) family (space group: Pna2 1 ). In each (CuO, MO 2 )/bpy/HF(aq) (M = Ti, Zr, Hf) system, the polar noncentrosymmetric racemate (M-NCS) forms in competition with a centrosymmetric one-dimensional chain compound (M-CS) based on alternating Cu(bpy)(H 2 O) 2 2+ and MF 6 2– basic building units (space groups: Ti-CS (Pnma), Zr-CS (P1̅), Hf-CS (P2/n)). Machine learning models were trained on reaction parameters to gain unbiased insight into the underlying statistical trends in each composition space. A human-interpretable decision tree shows that phase selection is driven primarily by the bpy:CuO molar ratio for reactions containing Zr or Hf, and predicts that formation of the Ti-NCS compound requires that the amount of HF present be decreased to raise the pH, which we verified experimentally. Predictive leave-one-metal-out (LOO) models further confirm that behavior in the Ti system is distinct from that of the Zr and Hf systems. The chemical origin of this distinction was probed via fluorine K-edge X-ray absorption spectroscopy. Pre-edge features in the F1s X-ray absorption spectra reveal the strong ligand-to-metal π bonding between Ti(3d – t 2g ) and F(2p) states that distinguishes the TiF 6 2– anion from the ZrF 6 2– and HfF 6 2– anions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Single-photon detection using high-temperature cuprate superconductors

The detection of individual quanta of light is important for quantum computation, fluorescence lifetime imaging, single-molecule detection, remote sensing, correlation spectroscopy, and more. Thanks to their broadband operation, high detection efficiency, exceptional signal-to-noise ratio, and fast recovery times, superconducting nanowire single-photon detectors (SNSPDs) have become a critical component in these applications. The operation of SNSPDs based on conventional superconductors, which have a low critical temperature (T c ), requires costly and bulky cryocoolers. This motivated exploration of other superconducting materials with higher T c that would enable single-photon detection at elevated temperatures, yet this task has proven exceedingly difficult. Here we show that with proper processing, high-T c cuprate superconductors can meet this challenge. We fabricated superconducting nanowires (SNWs) out of thin flakes of Bi 2 Sr 2 CaCu2O 8+δ and La 1.55 Sr 0.45 CuO 4 /La 2 CuO 4 (LSCO-LCO) bilayer films and demonstrated their single-photon response up to 25 and 8 K, respectively. The single-photon operation is revealed through the linear scaling of the photon count rate (PCR) on the radiation power. Both of our cuprate-based SNSPDs exhibited single-photon sensitivity at the technologically-important 1.5 μm telecommunications wavelength. Our work expands the family of superconducting materials for SNSPD technology, opens the prospects of raising the temperature ceiling, and raises important questions about the underlying mechanisms of single-photon detection by unconventional superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗