Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Connected vehicles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

AeroMACS System Characterization and Demonstrations

The Aeronautical Mobile Airport Communications System (AeroMACS) is being developed to provide a new broadband wireless communications capability for safety critical communications in the airport surface domain, providing connectivity to aircraft and other ground vehicles as well as connections between other critical airport fixed assets. AeroMACS development has progressed from requirements definition through technology definition, prototype deployment and testing, and now into national and international standards development. The first prototype AeroMACS system has been deployed at the Cleveland Hopkins International Airport (CLE) and the adjacent NASA Glenn Research Center (GRC). During the past three years, extensive technical testing has taken place to characterize the performance of the AeroMACS prototype and provide technical support for the standards development process. The testing has characterized AeroMACS link and network performance over a variety of conditions for both fixed and mobile data transmission and has included basic system performance testing and fixed and mobile applications testing. This paper provides a summary of the AeroMACS performance testing and the status of standardization activities that the testing supports.

Kerczewski, Robert J.↗
DOE OSTI2021

Resilience-based Recovery Scheduling of Transportation Network in Mixed Traffic Environment: A Deep-Ensemble-Assisted Active Learning Approach

Devising effective post-hazard recovery strategies is critical in enhancing the resilience of transportation networks (TNs). However, existing work does not consider the multiclass users’ travel behavior in network functionality quantification and the metaheuristic solution procedures often suffer from extensive computational burden due to the exploration need in large solution space and the expensive functionality quantification. Here, this study develops a bilevel decision-making framework for the resilience-based recovery scheduling of the TN in a mixed traffic environment with connected and autonomous vehicles (CAVs) and human-driven vehicles (HDVs). The lower level quantifies the TN's functionality over time considering different travel behavior of CAV and HDV users arisen from their different levels of information perception. The upper level presents a novel deep-ensemble-assisted active learning approach to balance optimization performance and computational cost. This framework can help decision makers better quantify the TN's functionality to support effective recovery scheduling of TN with different mixed traffic scenarios ranging from HDV-only to future CAV-dominant traffic. The optimization approach bears the potential to be extended to solving general large-scale network recovery scheduling problems effectively and efficiently. The proposed methodology is demonstrated using a real-world traffic network in Southern California under earthquake considering deterministic and stochastic repair durations.

42 ENGINEERING↗
NASA NTRS1976

Postflight analysis for Delta Program Mission no. 113: COS-B Mission

On 8 August 1975, the COS-B spacecraft was launched successfully from the Western Test Range (Delta Program Mission No. 113). The launch vehicle was a three stage Extended Long Tank Delta DSV-3P-11B vehicle. Postflight analyses performed in connection with flight are presented. Vehicle trajectory, stage performance, vehicle reliability and the propulsion, guidance, flight control, electronics, mechanical and structural systems are evaluated.

Source record↗
NASA NTRS1977

Baseline tests of the EVA contractor electric passenger vehicle

The EVA Contactor four door sedan, an electric passenger vehicle, was tested to characterize the state-of-the-art of electric vehicles. It is a four passenger sedan that was converted to an electric vehicle. It is powered by 16 series connected 6 volt electric vehicle batteries through a four step contactor controller actuated by a foot accelerator pedal. The controller changes the voltage applied to the separately excited DC motor. The braking system is a vacuum assisted hydraulic braking system. Regenerative braking was also provided.

Bozek, J. M.↗
DOE OSTI2020

Corroborative Evaluation of the Real-World Energy Saving Potentials of InfoRich Eco-Autonomous Driving (iREAD) System

There has been an increasing interest in exploring the potential to reduce energy consumption of future connected and automated vehicles. People have extensively studied various eco-driving implementations that leverage preview information provided by on-board sensors and connectivity, as well as the control authority enabled by automation. Quantitative real-world evaluation of eco-driving benefits is a challenging task. The standard regulatory driving cycles used for measuring exhaust emissions and fuel economy are not truly representative of real-world driving, nor for capturing how connectivity and automation might influence driving trajectories. To adequately consider real-world driving behavior and potential “off-cycle” impacts, this paper presents four collaborative evaluation methods: large-scale simulation, in-depth simulation, vehicle-in-the-loop testing, and vehicle road testing. These four approaches, spanning simulation and testing aspects, evaluate real-world fuel economy benefits with different ranges and resolutions. The large-scale simulations leverage an extensive real-world driving database to assess overall eco-driving benefits across a range of road network and driving scenarios. The real-world driving data are further leveraged to generate representative driving routes for deeper evaluation. Based on the representative routes, in-depth simulation relying on high-fidelity models investigates how different traffic scenarios can impact the eco-driving performance. The vehicle-in-the-loop setup reinforces the in-depth simulations by conducting tests with an actual vehicle operated on a chassis dynamometer; the measured energy savings were indeed found to agree with the in-depth simulation savings estimates. Finally, limited but representative road testing with the fully integrated vehicle will be conducted to demonstrate the eco-driving capability and conclude the overall evaluation regimen.

ARPA-E↗
NASA NTRSDate not supplied

Aerial Vehicle Routing and Scheduling for UAS Traffic Management: A Monte Carlo Tree Search Approach

Numerous unmanned aircraft systems operating at low altitudes to deliver goods and services may one day become ubiquitous in our cities. In the Unmanned Aircraft Systems (UAS) Traffic Management (UTM) framework, such a concept is envisioned, where aerial vehicles operate beyond visual line of sight (BVLOS) within specifically reserved and time stamped “corridors” in the airspace. For example, these corridors or operational intent volumes can connect an aerial vehicle’s origin site to its destination site for package delivery operations. There may also be more than one corridor available for an aerial vehicle to choose from and often different corridors may intersect with one another. Thus, it is imperative to ensure flight trajectories belonging to different aerial vehicles are not in conflict. Per the UTM CONOPs, we assume that a vehicle almost always stays inside its corridor or operational volume. This work provides a framework for strategic deconfliction of UTM or package delivery drones, where we schedule the departure time of all vehicles subject to various temporal constraints (including the corridor deconfliction at the intersections). We present the “multi-route weighted package delivery problem” which serves as an exemplifying model for strategic deconfliction in UTM. In the multi-route weighted package delivery problem, a graph network is given which consists of a set of depots (source) and drop-off (destination) nodes, with multiple routes (defined as a sequence of waypoints) connecting the depots to drop-off nodes. In addition, routes are weighted by the associated ground risk and total travel distance for package delivery. The goal is for a known set of aerial vehicles to depart from the depots, choose a route and take off time, while avoiding conflicts with other aerial vehicles, and minimizing both risk and distance traveled. We provide a mixed integer linear programming (MILP) formulation of the problem, as well as a heuristic solution based on Monte Carlo Tree Search (MCTS) – a method used in game theory and artificial intelligence – to overcome limitations inherent to optimal solvers. Computational results show the advantages of using MCTS over the MILP formulation; the former can provide a sub-optimal solution quickly, and may sometimes even reach an optimal solution, whereas the latter may not even produce a solution in reasonable time. Furthermore, results from both the MILP formulation and MCTS methods were validated using a preliminary agent-based simulator implementing the UTM concept of operations. Thus, the MCTS method can be seen as a scalable solution to the complex multi-route weighted package delivery problem and may possibly be extended to similar complex optimization problems.

Kenny Chour↗
DOE OSTI2021

Formation and reconfiguration of tight multi-lane platoons

Advances in vehicular communication technologies are expected to facilitate cooperative driving in the future. Connected and Automated Vehicles (CAVs) are able to collaboratively plan and execute driving maneuvers by sharing their perceptual knowledge and future plans. In this paper, an architecture for autonomous navigation of tight multi-lane platoons traveling on public roads is presented. Using the proposed approach, CAVs are able to form single or multi-lane platoons of various geometrical configurations. They are able to reshape and adjust their configurations according to changes in the environment. The proposed architecture consists of two main components: an offline motion planner system and an online hierarchical control system. The motion planner uses an optimization-based approach for cooperative formation and reconfiguration in tight spaces. A constrained optimization scheme is used to plan smooth, dynamically feasible and collision-free trajectories for all the vehicles within the platoon. The paper addresses online computation limitations by employing a family of maneuvers precomputed offline and stored on a look-up table on the vehicles. The online hierarchical control system is composed of three levels: a traffic operation system (TOS), a decision-maker, and a path-follower. The TOS determines the desired platoon reconfiguration. The decision-maker checks the feasibility of the reconfiguration plan based on real-time information about the surrounding traffic. The reconfiguration maneuver is executed by a low-level path-following feedback controller in real-time. The effectiveness of the approach is demonstrated through simulations of three case studies: (1) formation reconfiguration (2) obstacle avoidance, and (3) benchmarking against behavior-based planning in which the desired formation is achieved using a sequence of motion primitives.

42 ENGINEERING↗
DOE OSTI2021

Decision Tree Regression to Identify Representative Road Sections for Evaluating Performance of Connected and Automated Class 8 Tractors

Currently, connected and autonomous vehicle (CAV) technology is being developed for Class 8 tractor trucks aimed at improved safety and fuel economy and reduced CO2 emissions. Despite extensive efforts conducted across the world, the reported efficiency gains were varied from different research groups, raising concerns about the fidelity of models, the performance of control, and the effectiveness of the experimental validation. One root cause for this variation stems from the fact that the efficiency gain obtained from the CAV is sensitive to real-world conditions, including surrounding traffic and road grade. This study presents an approach aimed at identifying representative public road sections and facilitating CAV research from this perspective. By employing the decision tree regression (DTR) method to the Fleet DNA database, the most representative road sections can be identified. High-level metrics and detailed information of the derived road sections are also illustrated and discussed, which demonstrate their representativeness and the effectiveness of the approach. Meanwhile, the capability of this approach can be easily extended by integrating specific constraints into the DTR algorithm. As an example, a specific representative road section with an aggressive road grade profile was also provided via this approach.

27 ARPA - Advanced Research Projects Agency-Energy↗
NASA NTRS1981

Position surveillance using one active ranging satellite and time-of-arrival of a signal from an independent satellite

A satellite-aided mobile communication service was tested for position surveillance, with an automatic responder circuit connected between the vehicle receiver and transmitter, and a receiver coded for signals from another satellite. Using the ATS-6 and GOES satellites, a tone-code ranging transponder was connected between the receiver and transmitter, and a 468 MHz receiver was connected to the responder unit for passive reception of the 100 bit per second timing and data signal. Results showed lines of position derived from the active ranging through ATS-6 to be accurate to approximately 0.1 nautical mile, while the NOAA-GOES signals were accurate to about 1.6 miles. The active ranging bandwidth was 2.44 kHz, and the integration time was 0.1 second, while the limitation on accuracy was the 100 Hz bandwidth. This technique of position surveillance was concluded to be feasible and simple to operate, providing needed, good quality communications to the inland waterways industry.

Anderson, R. E.↗
DOE OSTI2020

SMART Mobility. Modeling Workflow Development, Implementation, and Results Capstone Report

The U.S. Department of Energy’s Systems and Modeling for Accelerated Research in Transportation (SMART) Mobility Consortium is a multiyear, multi-laboratory collaborative, managed by the Energy Efficient Mobility Systems Program of the Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Office, dedicated to further understanding the energy implications and opportunities of advanced mobility technologies and services. The first three-year research phase of SMART Mobility occurred from 2017 through 2019, and included five research pillars: Connected and Automated Vehicles, Mobility Decision Science, Multi-Modal Freight, Urban Science, and Advanced Fueling Infrastructure. A sixth research thrust integrated aspects of all five pillars to develop a SMART Mobility Modeling Workflow to evaluate new transportation technologies and services at scale. This report summarizes the work of the SMART Mobility Modeling Workflow effort. The SMART Mobility Modeling Workflow was developed to evaluate new transportation technologies such as connectivity, automation, sharing, and electrification through multi-level systems analysis that captures the dynamic interactions between technologies. By integrating multiple models across different levels of fidelity and scale, the Workflow yields insights about the influence of new mobility and vehicle technologies at the system level. For information about the other Pillars, please refer to the relevant pillar’s Capstone Report.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS1985

Hybrid and Electric Advanced Vehicle Systems Simulation

Predefined components connected to represent wide variety of propulsion systems. Hybrid and Electric Advanced Vehicle System (HEAVY) computer program is flexible tool for evaluating performance and cost of electric and hybrid vehicle propulsion systems. Allows designer to quickly, conveniently, and economically predict performance of proposed drive train.

Beach, R. F.↗
DOE OSTI2025

Cooperative On-Ramp Merging with Time-Varying Vehicle-to-Vehicle Communication Delay Compensation via a Model-Free Approach

Cooperative merging strategies enabled by vehicle-to-vehicle (V2V) communication have shown promise in addressing congestion, fuel inefficiency, and collision risks. However, their performance can be severely degraded by time-varying and uncertain communication delays-an issue often overlooked in existing research, which primarily focuses on merging sequence determination and trajectory planning. Furthermore, practical considerations such as heterogeneous vehicle dynamics, varying road conditions, and real-time implementation complexities are frequently neglected. This paper presents a model-free, online planning framework for cooperative on-ramp merging of connected and automated vehicles (CAVs), explicitly accounting for time-varying V2V communication delays. Without relying on detailed vehicle dynamics, the proposed method introduces a data-driven delay compensation scheme. A co-simulation platform integrating high-fidelity vehicle dynamics, traffic simulation (SUMO), and V2V communication within MATLAB/Simulink is developed to evaluate the proposed method. Simulation results demonstrate that unaddressed V2V communication delays significantly impair merging performance. In contrast, the proposed framework enhances intervehicle distance tracking and maintains low CO2 emissions and fuel consumption, under communication delay across different communication frequencies. In conclusion, its lightweight design also facilitates real-time implementation, making it well-suited for deployment in practical CAV systems.

Accounting↗
DOE OSTI2021

Space vehicle system and payload interposer (PIP) board

A payload interposer (PIP) board provides an interface for hosting payloads on a space vehicle platform. Payload development may be performed via the PIP board in a manner that “abstracts” the hardware of the space vehicle from the payload developer. The PIP board may include a host side payload interface connector that connects to a space vehicle and a payload side payload interface connector that connects to a payload. Power, CDH, and other space vehicle functionality may thus be provided to the payload from the space vehicle via the PIP board.

Proicou, Michael↗
DOE OSTI2020

Traffic Prediction for Merging Coordination Control in Mixed Traffic Scenarios

Connected and autonomous vehicles (CAVs) have the potential to bring in safety, mobility, and energy benefits to transportation. The control decisions of CAVs are usually determined for a look-ahead horizon based on previewed traffic information. This requires an effective prediction of future traffic conditions and its integration with the CAV control framework. However, the short-term traffic prediction using information from connectivity is a challenging research topic, especially for mixed traffic scenarios. This work focuses on the development of a traffic prediction framework for a merging coordination controller. The previously developed merging controller coordinates the merging sequence and travel speed of CAVs to maximize the energy efficiency and overall mobility. In mixed traffic scenarios, the controller receives information regarding the position of all the vehicles traveling inside a control zone and controls the desired speed of all CAVs. The controller has no control on the human-driven vehicles. The merging controller does not have direct information or an explicit prediction on the behaviors of human-driven vehicles. Aiming to improve the performance of the merging controller in various mixed traffic conditions, a traffic prediction algorithm is developed and evaluated in this work. The performance of this traffic prediction algorithm is investigated for various penetration rates of connectivity for a single-lane secondary road merging to a single-lane primary road. The results show that compared to a constant speed assumption of human-driven vehicles, the proposed traffic prediction algorithm is able to reduce the prediction error of the arrival time of human-driven vehicles at the merging zone by more than 50%.

Shao, Yunli↗
DOE OSTI2021

Real-World Driving Features for Identifying Intelligent Driver Model Parameters

Driver behavior models play a significant role in representing different driving styles and the associated relationships with traffic patterns and vehicle energy consumption in simulation studies. The models often serve as a proxy for baseline human driving when assessing energy-saving strategies that alter vehicle velocity. Such models are especially important in connectivity-enabled energy-saving strategy research because they can easily adapt to changing driving conditions like posted speed limits or change in traffic light state. While numerous driver models exist, parametric driver models provide the flexibility required to represent variability in real-world driving through different combinations of model parameters. These model parameters must be informed by a representative set of parameter values for the driver model to adequately represent a real-world driver. It stands to reason that determining the parameter values from real-world driving data would serve the purpose of representing a real-world driver. Although the published literature is replete with techniques and consequences of using real-world driving data to determine parameter values for parametric driver models, none have explored them in the context of using shorter driving features where the parameter values may change over the course of a single trip for the same driver. In this study we consider the “intelligent driver model” (IDM) as our driver behavior model and use real-world driving data from the Transportation Secure Data Center (TSDC) maintained at the National Renewable Energy Laboratory (NREL). The TSDC includes real-world travel data from across the United States, from which NREL has created a wide range of driving routes consisting of road features such as speed limits, stop locations, and turn locations. The real-world driving data are categorized into different driving regimes and extracted into driving features. The driving features are then used to calibrate the parameter values for the IDM. The distribution of the parameters and the relationships among them are reported. The insights obtained from this study enable judicious usage of IDM or similar parametric driver models to represent baseline human driver behavior in simulations.

27 ARPA - Advanced Research Projects Agency-Energy↗
DOE OSTI2021

Real-World Driving Features for Identifying Intelligent Driver Model Parameters: Preprint

Driver behavior models play a significant role in representing different driving styles and the associated relationships with traffic patterns and vehicle energy consumption in simulation studies. The models often serve as a proxy for baseline human driving when assessing energy-saving strategies that alter vehicle velocity. Such models are especially important in connectivity-enabled energy-saving strategy research because they can easily adapt to changing driving conditions like posted speed limits or change in traffic light state. While numerous driver models exist, parametric driver models provide the flexibility required to represent variability in real-world driving through different combinations of model parameters. These model parameters must be informed by a representative set of parameter values for the driver model to adequately represent a real-world driver. It stands to reason that determining the parameter values from real-world driving data would serve the purpose of representing a real-world driver. While the published literature is replete with techniques and consequences of using real-world driving data to determine parameter values for parametric driver models, none have explored them in the context of using shorter driving features where the parameter values may change over the course of a single trip for the same driver. In this study we consider the “Intelligent Driver Model” (IDM) as the driver behavior model to explore and real-world driving data from the Transportation Secure Data Center (TSDC) maintained at the National Renewable Energy Laboratory (NREL). The TSDC includes real-world travel data from across the United States, from which NREL has created a wide range of driving routes consisting of road features such as speed limits, stop locations and turn locations. The real-world driving data are categorized into different driving regimes and extracted into driving features. The driving features are then used to calibrate the parameter values for the IDM. The distribution of the parameters and the relationships among them are reported. The insights obtained from this study enable judicious usage of IDM or similar parametric driver models to represent baseline human driver behavior in simulations.

27 ARPA - Advanced Research Projects Agency-Energy↗
DOE OSTI2020

SMART Mobility. Advanced Fueling Infrastructure Capstone Report

The U.S. Department of Energy’s Systems and Modeling for Accelerated Research in Transportation (SMART) Mobility Consortium is a multiyear, multi-laboratory collaborative, managed by the Energy Efficient Mobility Systems Program of the Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Office, dedicated to further understanding the energy implications and opportunities of advanced mobility technologies and services. The first three-year research phase of SMART Mobility occurred from 2017 through 2019 and included five research pillars: Connected and Automated Vehicles, Mobility Decision Science, Multi-Modal Freight, Urban Science, and Advanced Fueling Infrastructure. A sixth research thrust integrated aspects of all five pillars to develop a SMART Mobility Modeling Workflow to evaluate new transportation technologies and services at scale. This report summarizes the work of the Advanced Fueling Infrastructure Pillar. This Pillar investigated the charging infrastructure needs of electric ride-hailing and car-sharing vehicles, automated shuttle buses, and freight-delivery truck fleets. For information about the other Pillars and about the SMART Mobility Modeling Workflow, please refer to the relevant Pillar’s Capstone Report.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗