Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cloud radiative forcing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Remote-sensing detectability of airborne Arctic dust

Remote-sensing (RS)-based estimates of Arctic dust are oftentimes overestimated due to a failure in separating out the dust contribution from that of spatially homogeneous clouds or low-altitude cloud-like plumes. A variety of illustrations are given with a particular emphasis on questionable claims of using brightness temperature differences (BTDs) as a signature indicator of Arctic dust transported from mid-latitude deserts or generated by local Arctic sources. While there is little dispute about the presence of both Asian and local dust across the Arctic, the direct RS detectability of airborne dust, as ascribed to satellite (MODIS and AVHRR) measurements of significantly negative brightness temperature differences at 11 and 12 µm (BTD 11–12 ), has been misrepresented in certain cases. While it is difficult to account for all examples of strongly negative BTD 11–12 values in the Arctic, it is unlikely that airborne dust plays a significant role. One much more likely contributor would be water clouds in the Arctic inversion layer. The RS detectability of the impact of Arctic dust (notably due to Arctic dust from local sources) can, however, be of significance. Sustained dust deposition can substantially decrease (visible to shortwave IR) snow and ice reflectance albedo (pan-chromatic reflectance) and the signal measured by satellite sensors. Significantly negative BTD 11–12 values would, however, only represent a limited area near the drainage basin sources according to our event-level case studies. The enhanced ice-nucleating particle (INP) role of local Arctic dust can, for example, induce significant changes in the properties of low-level mixed-phase clouds (cloud optical depth changes <~ 1) that can readily be detected by active and passive RS instruments. It is critical that the distinction between the RS detectability of airborne Arctic dust versus the RS detectability of the impacts of that dust be understood if we are to appropriately parameterize, for example, the radiative forcing influence of dust in this climate-sensitive region.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

The Influence of Anomalous Biomass Emissions on ENSO in CESM2

Abstract The influence of biomass burning (BB) aerosols arising from wildfires and agricultural fires on the transient coupled evolution of El Niño–Southern Oscillation (ENSO) is explored in Community Earth System Model, version 2 (CESM2). For both El Niño and La Niña, two 20-member ensembles are generated from initial states that are predisposed to evolve into ENSO events. For each ENSO phase, one ensemble is forced with the observed BB emissions during satellite-era ENSO events while the other is forced with a climatological annual cycle, with the responses to anomalous BB emissions estimated from interensemble differences. It is found that the regional responses to anomalous BB emissions occur mainly during boreal fall, which is also the time of the climatological seasonal maximum in emissions. Transient responses are identified in precipitation, clouds, and radiation in both the tropics and extratropics. At the onset of El Niño, these include increased precipitation in the northern branch of the intertropical convergence zone (ITCZ) and an enhancement of cloud albedo and amount across the Maritime Continent and eastern subtropical Pacific Ocean. Additional responses are identified through the course of El Niño and successive La Niña events, the net effect of which is to strengthen sea surface temperature (SST) anomalies in the eastern Pacific Ocean during El Niño and warm the tropical Pacific Ocean during La Niña. These responses improve the simulation of ENSO power, diversity, and asymmetry in CESM2. Significance Statement Biomass burning emissions from both wildfires and agricultural fires during ENSO act as a climate feedback, as they are both driven by fire weather anomalies tied to ENSO and influence clouds, radiation, and precipitation on a global scale. While the largest biomass burning (BB) emissions emanate mainly from Indonesia, other regions also exhibit systematic responses. When simulated in CESM2, the emissions collectively impact the flows of energy across the tropical Pacific Ocean in a spatially and temporally complex fashion, with the net effect of improving CESM2’s simulation of ENSO events.

Fasullo, John T. [National Center for Atmospheric ↗
DOE OSTI2023

TRACER-Uncrewed Aircraft System (TRACER-UAS) Field Campaign Report

Convective processes drive the development of clouds across a variety of scales, thereby playing a central role in governing weather and climate globally. These processes help to set the stage for circulations that redistribute heat and moisture throughout the lower atmosphere, and simultaneously develop storms that supply precipitation to regions that depend on such rain events for supporting a variety of societal needs. At the same time, extreme precipitation events can result in localized flooding of low-lying areas, posing hazards to transportation and regional inhabitants, and potentially damaging structures and infrastructure. As a result, there is an inherent need to better understand the drivers and modulators of clouds and precipitation and leverage such understanding to make projections of how these important systems may evolve with a changing climate. With nearly three billion of Earth’s human inhabitants living within 200 km of a shoreline, development of such understanding is particularly important in coastal regimes. Central drivers of convective cloud development and life cycle in coastal environments include synoptic forcing, local meso- and microscale circulation regimes, microphysical evolution, and aerosol properties. Atmospheric boundary layer (ABL) development and its evolution can help drive the formation and organization of convective clouds, which then impart their own controls through dynamic processes related to latent heating and cooling (including cold-pool formation and propagation), three-dimensional radiative effects, and background environmental conditions (Fan et al. 2016). Such clouds have been contributing to record precipitation events in southeast Texas in recent years, relative to the last several decades of data from regional precipitation gauges (Fagnant et al. 2020). The greater Houston urban area has experienced particularly large increases in the frequency of extreme rainfall events, with enhanced intensity of extreme events (stretching of distribution tails) having potentially significant implications for watershed floodplain planning and mapping in greater Houston and Harris County. While the most extreme precipitation events were associated with tropical cyclones (e.g., Tropical Storm Allison and Hurricane Harvey; Blood 2014, Kao et al. 2019), strong thunderstorms can also deliver large amounts of precipitation over the area over relatively short periods.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

A protocol for model intercomparison of impacts of marine cloud brightening climate intervention

A modeling protocol (defined by a series of climate model simulations with specified model output) is introduced. Studies using these simulations are designed to improve the understanding of climate impacts using a strategy for climate intervention (CI) known as marine cloud brightening (MCB) in specific regions; therefore, the protocol is called MCB-REG (where REG stands for region). The model simulations are not intended to assess consequences of a realistic MCB deployment intended to achieve specific climate targets but instead to expose responses to interventions in six regions with pervasive cloud systems that are often considered candidates for such a deployment. A calibration step involving simulations with fixed sea surface temperatures (SSTs) is first used to identify a common forcing, and then coupled simulations with forcing in individual regions and combinations of regions are used to examine climate impacts. Synthetic estimates constructed by superposing responses from simulations with forcing in individual regions are considered a means of approximating the climate impacts produced when MCB interventions are introduced in multiple regions. A few results comparing simulations from three modern climate models (CESM2, E3SMv2, and UKESM1) are used to illustrate the similarities and differences between model behavior and the utility of estimates of MCB climate responses that were synthesized by summing responses introduced in individual regions. Cloud responses to aerosol injections differ substantially between models (CESM2 clouds appear much more susceptible to aerosol emissions than the other models), but patterns in precipitation and surface temperature responses were similar when forcing is imposed with similar amplitudes in the same regions. A previously identified La Niña-like response to forcing introduced in the Southeast Pacific is evident in this study, but the amplitude of the response was shown to markedly differ across the three models. Other common response patterns were also found and are discussed. Forcing in the Southeast Atlantic consistently (across all three models) produces weaker global cooling than that in other regions, and the Southeast Pacific and South Pacific show the strongest cooling. This indicates that the efficiency of a given intervention depends on not only the susceptibility of the clouds to aerosol perturbations, but also the strength of the underlying radiative feedbacks and ocean responses operating within each region. These responses were generally robust across models, but more studies and an examination of responses with ensembles would be beneficial.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Global variability in atmospheric new particle formation mechanisms

A key challenge in aerosol pollution studies and climate change assessment is to understand how atmospheric aerosol particles are initially formed. Although new particle formation (NPF) mechanisms have been described at specific sites, in most regions, such mechanisms remain uncertain to a large extent because of the limited ability of atmospheric models to simulate critical NPF processes. Here we synthesize molecular-level experiments to develop comprehensive representations of 11 NPF mechanisms and the complex chemical transformation of precursor gases in a fully coupled global climate model. Combined simulations and observations show that the dominant NPF mechanisms are distinct worldwide and vary with region and altitude. Previously neglected or underrepresented mechanisms involving organics, amines, iodine oxoacids and HNO 3 probably dominate NPF in most regions with high concentrations of aerosols or large aerosol radiative forcing; such regions include oceanic and human-polluted continental boundary layers, as well as the upper troposphere over rainforests and Asian monsoon regions. These underrepresented mechanisms also play notable roles in other areas, such as the upper troposphere of the Pacific and Atlantic oceans. Accordingly, NPF accounts for different fractions (10–80%) of the nuclei on which cloud forms at 0.5% supersaturation over various regions in the lower troposphere. The comprehensive simulation of global NPF mechanisms can help improve estimation and source attribution of the climate effects of aerosols.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Assessing Global and Local Radiative Feedbacks Based on AGCM Simulations for 1980–2014/2017

In order to avoid contamination of unobservable and uncertain effective radiative forcing (ERF) on the diagnosis of radiative feedbacks based on short-term climate variability, we verify the Kernel-Gregory feedback calculation method using atmospheric model experiments with prescribed ERF. We show that both clear-sky radiative fluxes and all-sky radiative feedbacks have a closure between model simulations and kernel derivations. A near-zero global mean net cloud feedback is found in the simulation with prescribed ERF, which results in a more negative global net climate feedback, -2 W m -2 K -1 . Consistent with AMIP6 ensemble mean results, the lapse rate feedback is the largest contributor among all feedbacks to temperature amplification over the three poles (Arctic, Antarctic and Tibetan Plateau), followed by surface albedo feedback and Planck feedback deviation from its global mean. Except for the higher surface albedo feedback in the Antarctic, other feedbacks are almost same between the Arctic and Antarctic.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

CERESMIP: a climate modeling protocol to investigate recent trends in the Earth's Energy Imbalance

The Clouds and the Earth's Radiant Energy System (CERES) project has now produced over two decades of observed data on the Earth's Energy Imbalance (EEI) and has revealed substantive trends in both the reflected shortwave and outgoing longwave top-of-atmosphere radiation components. Available climate model simulations suggest that these trends are incompatible with purely internal variability, but that the full magnitude and breakdown of the trends are outside of the model ranges. Unfortunately, the Coupled Model Intercomparison Project (Phase 6) (CMIP6) protocol only uses observed forcings to 2014 (and Shared Socioeconomic Pathways (SSP) projections thereafter), and furthermore, many of the ‘observed' drivers have been updated substantially since the CMIP6 inputs were defined. Most notably, the sea surface temperature (SST) estimates have been revised and now show up to 50% greater trends since 1979, particularly in the southern hemisphere. Additionally, estimates of short-lived aerosol and gas-phase emissions have been substantially updated. These revisions will likely have material impacts on the model-simulated EEI. We therefore propose a new, relatively low-cost, model intercomparison, CERESMIP, that would target the CERES period (2000-present), with updated forcings to at least the end of 2021. The focus will be on atmosphere-only simulations, using updated SST, forcings and emissions from 1990 to 2021. The key metrics of interest will be the EEI and atmospheric feedbacks, and so the analysis will benefit from output from satellite cloud observation simulators. The Tier 1 request would consist only of an ensemble of AMIP-style simulations, while the Tier 2 request would encompass uncertainties in the applied forcing, atmospheric composition, single and all-but-one forcing responses. We present some preliminary results and invite participation from a wide group of models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Cloud condensation nuclei concentrations derived from the CAMS reanalysis

Determining number concentrations of cloud condensation nuclei (CCN) is one of the first steps in the chain in analysis of cloud droplet formation, the direct microphysical link between aerosols and cloud droplets, and a process key for aerosol–cloud interactions (ACI). However, due to sparse coverage of in situ measurements and difficulties associated with retrievals from satellites, a global exploration of their magnitude, source as well as temporal and spatial distribution cannot be easily obtained. Thus, a better representation of CCN numbers is one of the goals for quantifying ACI processes and achieving uncertainty-reduced estimates of their associated radiative forcing. Here, we introduce a new CCN dataset which is derived based on aerosol mass mixing ratios from the latest Copernicus Atmosphere Monitoring Service reanalysis (CAMSRA) in a diagnostic model that uses CAMSRA aerosol properties and a simplified kappa-Köhler framework suitable for global models. The emitted aerosols in CAMSRA are not only based on input from emission inventories using aerosol observations, they also have a strong tie to satellite-retrieved aerosol optical depth (AOD) as this is assimilated as a constraining factor in the reanalysis. Furthermore, the reanalysis interpolates for cases of poor or missing retrievals and thus allows for a full spatiotemporal quantification of CCN numbers. The derived CCN dataset captures the general trend and spatial and temporal distribution of total CCN number concentrations and CCN from different aerosol species. A brief evaluation with ground-based in situ measurements demonstrates the improvement of the modelled CCN over the sole use of AOD as a proxy for CCN as the overall correlation coefficient improved from 0.37 to 0.71. However, we find the modelled CCN from CAMSRA to be generally high biased and find a particular erroneous overestimation at one heavily polluted site which emphasises the need for further validation. The CCN dataset (https://doi.org/10.26050/WDCC/QUAERERE_CCNCAMS_v1, Block, 2023), which is now freely available to users, features 3-D CCN number concentrations of global coverage for various supersaturations and aerosol species covering the years 2003–2021 with daily frequency. This dataset is one of its kind as it offers lots of opportunities to be used for evaluation in models and in ACI studies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Biomass burning aerosol radiative effects in the Southeast Atlantic depend strongly on meteorological forcing method

Biomass burning aerosols (BBAs) from African fires may strongly impact Earth’s radiation budget in the southeast Atlantic (SEA), but the sign and magnitude of the overall radiative effect (RE) remain uncertain. Aerosol–climate models are needed to separately quantify direct, indirect, and semi-direct REs. Here, we evaluate improved simulations with the UK Met Office's Unified Model and explore REs resulting from various methods used to match observed meteorology (nudging or running forecasts reinitialized at different frequencies). REs are calculated as differences in radiative fluxes between simulations with and without smoke emissions and with and without aerosol absorption. All model setups agree on net warming for the SEA dominated by the direct effect. Simulated smoke, clouds, and the direct effect agree better with observations than previous studies using the same model, though biases in aerosol extinction and liquid water path remain. Changes in cloud droplet number concentration due to BBA self-lofting influence how cleanly we can separate cloud effects into semi-direct and indirect effects. Total RE, which remains unaffected, ranges from +3.0 to +7.9 W m −2 . The 4.9 W m −2 spread arises mainly from simulated semi-direct effects. Forecasts three days long or less probably do not allow time for plausible differences in boundary layer properties due to semi-direct effects to accumulate. Free running simulations with and without smoke accumulate differences in meteorology that are likely spurious “butterfly effects”. We recommend future research quantifying BBA REs over weeks to months to use meteorological forcing techniques that allow aerosol absorption to affect the boundary layer.

Giuffrida, Eric [Carnegie Mellon University, Pitts↗
DOE OSTI2025

Impact of host climate model on contrail cirrus effective radiative forcing estimates

Estimates of aviation effective radiative forcing (ERF) indicate that contrail cirrus is currently its largest contributor, although with a substantial associated uncertainty of ∼ 70 %. Here, we implement the contrail parameterisation developed for the Community Atmosphere Model (CAM) in the UK Met Office Unified Model (UM), allowing us to compare, for the first time, the impact of key features of the host climate model on contrail cirrus ERF. We find that differences in background humidity between the models result in the UM-simulated contrail fractions being 2 to 3 times larger than in CAM. Additionally, the models show contrasting responses in overall global cloud fraction, with contrails increasing the total cloud fraction in the UM and decreasing it in CAM. Differences in the complexity of the cloud microphysics schemes lead to significant differences in simulated changes to cloud ice water content due to aviation. After compensating for the unrealistically low contrail optical depth in the UM, we estimate the 2018 contrail cirrus ERF to be 40.8 mW m−2 in the UM, compared to 60.1 mW m−2 in CAM. These values highlight the substantial uncertainty in contrail cirrus ERF due to differences in microphysics and radiation schemes between the two models. We also find a factor-of-8 uncertainty in contrail cirrus ERF due to existing uncertainty in contrail cirrus optical depth. Future research should focus on better representing microphysical and radiative contrail characteristics in climate models and on improved observational constraints.

Zhang, Weiyu [University of Leeds (United Kingdom)↗
DOE OSTI2024

Broadband and filter radiometers at Ross Island, Antarctica: detection of cloud ice phase versus liquid water influences on shortwave and longwave radiation

Abstract. Surface radiometer data from Ross Island, Antarctica, collected during the austral summer 2015–2016 by the US Department of Energy Atmospheric Radiation Measurement (ARM) program West Antarctic Radiation Experiment (AWARE), are used to evaluate how shortwave and longwave irradiance respond to changing cloud properties as governed by contrasting meteorological regimes. Shortwave atmospheric transmittance is derived from pyranometer measurements, and cloud conservative-scattering optical depth is derived from filter radiometer measurements at 870 nm. With onshore flow associated with marine air masses, clouds contain mostly liquid water. With southerly flow over the Transantarctic Mountains, orographic forcing induces substantial cloud ice water content. These ice and mixed-phase clouds attenuate more surface shortwave irradiance than the maritime-influenced clouds and also emit less longwave irradiance due to colder cloud base temperature. These detected irradiance changes are in a range that can mean onset or inhibition of surface melt over ice shelves. This study demonstrates how basic and relatively low-cost broadband and filter radiometers can be used to detect subtle climatological influences of contrasting cloud microphysical properties at very remote locations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Description of the Three-Dimensional Large-Scale Forcing Data from the 3D Constrained Variational Analysis (VARANAL3D)

This technical report introduces a Three-Dimensional Constrained Variational Analysis (3DCVA) (Tang and Zhang 2015) and its product of three-dimensional large-scale forcing data to drive single-column models (SCM), cloud-resolving models (CRM), and large-eddy simulation (LES) models, and to evaluate model results. The 3DCVA algorithm is an extension of the original 1D constrained variational analysis (1DCVA) (Zhang and Lin 1997, Zhang et al. 2001). The three-dimensional structure of the forcing data allows studies of spatial variation of the large-scale forcing fields and tests of physical parameterizations across scales. In the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility, the 3D forcing data are assigned the datastream name varanal3d. In this technical report, 3DCVA will be used to refer to the algorithm, while VARANAL3D will be used to refer to the data product.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Effective radiative forcing of anthropogenic aerosols in E3SMv1: historical changes, causality, decomposition, and parameterization sensitivities

The effective radiative forcing of anthropogenic aerosols (ERF aer ) is an important measure of the anthropogenic aerosol effects simulated by a global climate model. Here we analyze ERF aer simulated by the E3SMv1 atmosphere model using both century-long free-running atmosphere-land simulations and short nudged simulations. We relate the simulated ERF aer to characteristics of the aerosol composition and optical properties, and evaluate the relationships between key aerosol and cloud properties. In terms of historical changes from the year 1870 to 2014, our results show that the global mean anthropogenic aerosol burden and optical depth increase during the simulation period as expected, but the regional averages show large differences in the temporal evolution. The largest regional differences are found in the emission-induced evolution of the burden and optical depth of the sulfate aerosol: a strong decreasing trend is seen in the Northern Hemisphere high-latitude region after around 1970, while a continued increase is simulated in the tropics. Consequently, although the global mean anthropogenic aerosol burden and optical depth increase from 1870 to 2014, the ERF aer magnitude does not increase after around year 1970. The relationships between key aerosol and cloud properties (relative changes between preindustrial and present-day conditions) also show evident changes after 1970, diverging from the linear relationships exhibited for the period from 1870 to 2014. The ERF aer in E3SMv1 is relatively large compared to the recently published multi-model estimates; the primary reason is the large indirect aerosol effect (i.e., through aerosol-cloud interactions). Compared to other models, E3SMv1 features a stronger sensitivity of the cloud droplet effective radius to changes in the cloud droplet number concentration. Large sensitivity is also seen in the liquid cloud optical depth, which is determined by changes in both the effective radius and liquid water path. Aerosol-induced changes in liquid and ice cloud properties in E3SMv1 are found to have a strong correlation, as the evolution of anthropogenic sulfate aerosols affects both the liquid cloud formation and the homogeneous ice nucleation in cirrus clouds. The ERF aer estimates in E3SMv1 for the shortwave and longwave components are sensitive to the parameterization changes in both liquid and ice cloud processes. When the parameterization of ice cloud processes is modified, the top-of-atmosphere forcing changes in the shortwave and longwave components largely offset each other, so the net effect is negligible. This suggests that, to reduce the magnitude of the net ERF aer , it would be more effective to reduce the anthropogenic aerosol effect through liquid or mixed-phase clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Effective radiative forcing of anthropogenic aerosols in E3SM version 1: historical changes, causality, decomposition, and parameterization sensitivities

Abstract. The effective radiative forcing of anthropogenic aerosols (ERFaer) is an important measure of the anthropogenic aerosol effects simulated by a global climate model. Here we analyze ERFaer simulated by the E3SM version 1 (E3SMv1) atmospheric model using both century-long free-running atmosphere–land simulations and short nudged simulations. We relate the simulated ERFaer to characteristics of the aerosol composition and optical properties, and we evaluate the relationships between key aerosol and cloud properties. In terms of historical changes from the year 1870 to 2014, our results show that the global mean anthropogenic aerosol burden and optical depth increase during the simulation period as expected, but the regional averages show large differences in the temporal evolution. The largest regional differences are found in the emission-induced evolution of the burden and optical depth of the sulfate aerosol: a strong decreasing trend is seen in the Northern Hemisphere high-latitude region after around 1970, while a continued increase is simulated in the tropics. The relationships between key aerosol and cloud properties (relative changes between pre-industrial and present-day conditions) also show evident changes after 1970, diverging from the linear relationships exhibited for the period of 1870–1969. In addition to the regional differences in the simulated relationships, a reduced sensitivity in cloud droplet number and other cloud properties to aerosol perturbations is seen when the aerosol perturbation is large. Consequently, the global annual mean ERFaer magnitude does not increase after around 1970. The ERFaer in E3SMv1 is relatively large compared to the recently published multi-model estimates; the primary reason is the large indirect aerosol effect (i.e., through aerosol–cloud interactions). Compared to other models, E3SMv1 features large relative changes in the cloud droplet effective radius in response to aerosol perturbations. Large sensitivity is also seen in the liquid cloud optical depth, which is determined by changes in both the effective radius and liquid water path. Aerosol-induced changes in liquid and ice cloud properties in E3SMv1 are found to have a strong correlation, as the evolution of anthropogenic sulfate aerosols affects both the liquid cloud formation and the homogeneous ice nucleation in cirrus clouds (that causes a large effect on longwave ERFaer). As suggested by a previous study, the large ERFaer appears to be one of the reasons why the model cannot reproduce the observed global mean temperature evolution in the second half of the 20th century. Sensitivity simulations are performed to understand which parameterization and/or parameter changes have a large impact on the simulated ERFaer. The ERFaer estimates in E3SMv1 for the shortwave and longwave components are sensitive to the parameterization changes in both liquid and ice cloud processes. When the parameterization of ice cloud processes is modified, the top-of-model forcing changes in the shortwave and longwave components largely offset each other, so the net effect is negligible. This suggests that, to reduce the magnitude of the net ERFaer, it would be more effective to reduce the anthropogenic aerosol effect through liquid or mixed-phase clouds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Size and Time-Resolved Automated Aerosol Sampling Field Campaign Report

To improve the understanding of the impacts of the vertical distribution of aerosol chemical composition on radiative forcing of aerosol, we performed a detailed physicochemical characterization of aerosol particles sampled during ARM deployment of the tethered balloon system at two ARM sites. We used multi-modal microscopy/spectroscopy techniques and advanced mass spectrometry platforms for the analysis of particles. We found variations in size-resolved aerosol composition at different altitudes. We also observed changes in aerosol composition during different seasons. Some of our observations at ARM’s Oliktok Point, Alaska site suggest cloud processing of aerosol while sampling in clouds, below clouds, and above clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Optimizing DOE Opportunities to Research Land–Atmosphere Interactions in the U.S. Southeast (Workshop Report)

The southeastern United States (Southeast), with its complex and varied environments, is an area of tremendous economic, ecological, and societal importance to the country. The region is characterized by heterogeneous landscapes (i.e., geology and soil type) and a long history of human land use coupled with a warm temperature regime and high precipitation. As a result, soil erosion and deposition are pronounced, vegetation recovery is rapid, and human modification is extensive across the region. To better understand land–atmosphere interactions in this important and complex region, research communities supported by the U.S. Department of Energy’s Biological and Environmental Research (BER) program identified the Southeast as a priority region of interest. In fall 2024, the third Atmospheric Radiation Measurement Mobile Facility (AMF3), one of three mobile monitoring facilities designed to collect atmospheric and climate data from undersampled regions around the world, will begin operations in northwestern Alabama’s Bankhead National Forest (BNF). The AMF3-BNF 5-year deployment, from 2024–2029, will monitor the effects of feedbacks among aerosols, clouds, and precipitation on plant physiology and canopy-scale fluxes. It will also focus on scale aggregation to resolve the role of local forcing on larger-scale processes. To enable broader AMF3 involvement by the science community, the BER Environmental System Science (ESS) program organized the Southeast Land– Atmosphere Research Opportunities (SELARO) workshop in August 2023. The purpose was to identify gaps in scientific understanding of terrestrial processes in the Southeast (defined as states bounded by the Gulf of Mexico to the south, the Atlantic Ocean to east, the Mississippi River to the west, and extending through Tennessee and North Carolina to the north) and explore opportunities to use the AMF3-BNF deployment to coordinate and leverage research efforts across the region. Many parts of the Southeast have experienced repeated anthropogenic forcings. Farming, hunting, burning, and settlement of the region by Indigenous Peoples first shaped the distribution of plant communities, which in turn influenced European colonization patterns. Timber harvesting was common during the expansion of European settlements, and production forestry continues today. Agricultural production was extensive and then waned through the 20th century, creating a period of afforestation following agricultural abandonment. Today, many formerly agricultural landscapes are undergoing rapid urbanization and suburbanization. Overlying these patterns of anthropogenic land use are frequent disturbances from hurricanes, tornadoes, wildfires, drought, flooding, ice storms, and the occasional blizzard. An additional characteristic of the Southeast is its overall landscape complexity. Unlike the western United States, where broad expanses may share similar characteristics, Southeast topography, drainage patterns, vegetation, and development patterns vary widely across relatively small spatial scales (<1 km). This is due to the region’s underlying geology and soil development, species biodiversity patterns, and land ownership and use coupled with strong forces of erosion, weathering, and rapid plant growth in the warm, wet climate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Towards a Unified Setup to Simulate Mid‐Latitude and Tropical Mesoscale Convective Systems at Kilometer‐Scales

Abstract Mesoscale convective systems (MCSs) are the main source of precipitation in the tropics and parts of the mid‐latitudes and are responsible for high‐impact weather worldwide. Studies showed that deficiencies in simulating mid‐latitude MCSs in state‐of‐the‐art climate models can be alleviated by kilometer‐scale models. However, whether these models can also improve tropical MCSs and whether we can find model settings that perform well in both regions is understudied. We take advantage of high‐quality MCS observations collected over the Atmospheric Radiation Measurement (ARM) facilities in the US Southern Great Plains (SGP) and the Amazon basin near Manaus (MAO) to evaluate a perturbed physics ensemble of simulated MCSs with 4 km horizontal grid spacing. A new model evaluation method is developed that enables to distinguish biases stemming from spatiotemporal displacements of MCSs from biases in their reflectivity and cloud shield. Amazon MCSs are similarly well simulated across these evaluation metrics than SGP MCSs despite the challenges anticipated from weaker large‐scale forcing in the tropics. Generally, SGP MCSs are more sensitive to the choice of model microphysics, while Amazon cases are more sensitive to the planetary boundary layer (PBL) scheme. Although our tested model physics combinations had strengths and weaknesses, combinations that performed well for SGP simulations result in worse results in the Amazon basin and vice versa. However, we identified model settings that perform well at both locations, which include the Thompson and Morrison microphysics coupled with the Yonsei University (YSU) PBL scheme and the Thompson scheme coupled with the Mellor‐Yamada‐Janjic PBL scheme.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

The Shortwave Cloud-SST Feedback Amplifies Multi-Decadal Pacific Sea Surface Temperature Trends: Implications for Observed Cooling

Climate models struggle to produce sea surface temperature (SST) gradient trends in the tropical Pacific comparable to those seen recently in nature. Here, we find that the magnitude of the cloud-SST feedback in the subtropical Southeast Pacific is correlated across models with the magnitude of Eastern Pacific multi-decadal SST variability. A heat-budget analysis reveals coupling between cloud-radiative effects, circulation, and SST gradients in driving multi-decadal variability in the Eastern Pacific. Using this relationship and observed feedback estimates, we find that internal Eastern Pacific SST variability is underestimated in most models. Adjusting for model bias increases the likelihood of generating a cooling trend at least as large as observations in preindustrial control simulations by ~56% on average. If models underestimate climate “noise,” as our results suggest, this bias should be accounted for when attributing the relative importance of forced versus unforced changes in the climate.

58 GEOSCIENCES↗