Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Chemical Bonds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Sustainable Shape Memory Elastomers with Reduced Melt Viscosity and Enhanced Stiffness

Melt reactive processing of lignin with nitrile rubber is a promising approach to synthesizing shape memory materials. The strong intramolecular interactions in lignin macromolecular structures, caused by π–π stacking in aromatic rings and hydrogen bonding, often result in large phase separation or low miscibility with rubbers. In this study, we investigated the chemical and molecular characteristics, as well as the stiffness and complex viscosity, of modified kraft lignin melt-reacted with an acrylonitrile/butadiene copolymer containing 41% acrylonitrile (NBR41). To enhance the macromolecular compatibility of kraft lignin with NBR41, kraft lignin was cross-linked with poly(propylene glycol) diglycidyl ether (PPDE) and trimethylolpropane triglycidyl ether (TTE), both rich in epoxy reactive groups capable of forming chemical bonds with hydroxyl and carboxyl groups. Here, our findings demonstrate that the modification of kraft lignin with PPDE and TTE resulted in significantly increased stiffness of the composites. The elastic modulus of NBR41-Kraft lignin-PPDE and NBR41-Kraft lignin-TTE increased by 82 and 162%, respectively. Both the yield strength and Young’s modulus of these two samples showed dramatic improvements. Specifically, the yield strength and Young’s modulus of NBR41-Kraft lignin-TTE increased nearly 4 and 3-fold, respectively, compared to the control sample. Interestingly, despite significant improvements in mechanical properties, the viscosity of NBR41-Kraft lignin-PPDE was substantially lower than that of the control sample. At 210 °C and an angular frequency of 1 rad/s, the complex viscosity of NBR41-Kraft lignin was approximately 100.25 ± 4.77 kPa·s, while that of NBR41-Kraft lignin-PPDE was significantly lower at 56 ± 0.93 kPa·s. These findings were validated through Fourier transform infrared spectroscopy, scanning electron microscopy, dynamic mechanical analysis, thermal characterization, rheological tests, and quasi-elastic neutron scattering techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Orientation Sensitive SEIRA Sensors Based on Single-Walled Carbon Nanotube Near Fields

Molecular vibrations that bear information about intrinsic properties of chemical compounds are challenging to detect at submonolayer densities. Surface-enhanced infrared absorption (SEIRA) spectroscopy has been proven to be a viable approach to enhance and detect weak vibration signals. Here, in this study, we report a SEIRA sensor based on mid-infrared surface plasmon resonances supported by single-walled carbon nanotubes (SWCNTs). Due to the 1D nature of SWCNTs, their plasmon modes are highly polarized with the electromagnetic fields spatially confined to nanometer scales. Leveraging these characteristics of SWCNTs, we observe a polarization selective coupling between their surface plasmons and vibrational modes of chemical bonds introduced onto their surfaces. A maximum modulation of similar to 15% to the plasmon resonance peak is obtained for a submonolayer chemical group coverage. These findings suggest that SWCNTs may potentially serve as a highly sensitive SEIRA platform for revealing intricate information about molecular compositions and bond orientations.

36 MATERIALS SCIENCE↗
NASA NTRS2000

Polyimide-Silica Hybrids Containing Novel Phenylethynyl Imide Silanes as Coupling Agents for Surface-Treated Titanium Alloy

Polyimide-silica hybrids composed of an organic precursor containing a novel phenylethynyl imide silane and an inorganic precursor were evaluated as an adhesion-promoting interphase between surface-treated titanium alloy and a phenylethynyl-containing imide adhesive. The phenylethynyl groups present in the organic precursor, either as a pendent or end group, can bond chemically with a phenylethynyl-containing imide adhesive during processing, while the silane groups of the organic precursor would react chemically with the inorganic precursor. In addition, the inorganic precursor is able to react with the titanium alloy to form a stable bond with the metal oxide. Bond strength and durability were evaluated by single lap shear tests at various conditions. Lap shear specimens exhibited predominantly cohesive failure after a 3-d water boil with 92% retention of the initial room temperature strength. Morphology and chemical composition of the hybrid interphase were investigated with scanning electron microscopy, X-ray photoelectron spectroscopy, and Auger electron spectroscopy, which revealed development of a silicon-gradient, hybrid structure between the metal substrate and the adhesive.

Park, C.↗
DOE OSTI2021

CyProduct: A software tool for accurately predicting the byproducts of human cytochrome P450 metabolism

In silico metabolism prediction is a cheminformatic task of autonomously predicting the set of metabolic byproducts produced from a specified molecule and a set of enzymes or reactions. Here we describe a novel machine-learned in silico cytochrome P450 (CYP450) metabolism prediction suite, called CyProduct, that accurately predicts metabolic byproducts for a specified molecule and a human CYP450 isoform. It includes three modules: (1) CypReact, a tool that predicts if the query compound reacts with a given CYP450 enzyme; (2) CypBoM, a tool that accurately predicts the “bond site” of the reaction (i.e., which specific bonds within the query molecule react with the CYP isoform); and (3) MetaboGen, a tool that generates the metabolic byproducts based on CypBoM’s bond-site prediction. CyProduct predicts metabolic biotransformation products for each of the nine most important human CYP450 enzymes. CypBoM uses an important new concept called “Bond of Metabolism” (BoM), which extends the traditional “Site of Metabolism" (SoM) by specifying the information about the set of chemical bonds that is modified or formed in a metabolic reaction (rather than the specific atom). We created a BoM database for 3487 CYP450-mediated Phase I reactions, then used this to train the CypBoM Predictor to predict the reactive bond locations on substrate molecules. CypBoM Predictor’s cross-validated Jaccard score for reactive bond prediction ranged from 0.380 to 0.452 over the nine CYP450 enzymes. Over variants of a test set of 72 known CYP450 substrates and 30 non-reactants, CyProduct outperformed the other packages -- including ADMET Predictor, BioTransformer and GLORY -- by an average of 200% (wrt Jaccard score) in terms of predicting metabolites. The CyProduct suite and the datasets are freely available at https://bitbucket.org/wishartlab/cyproduct/src/master/.

Machine learning, Cytochrome P450, Metabolism pred↗
DOE OSTI2026

Electron–Ion Covariance Reveals Geometry-Resolved Inner-Shell Spectra in CS 2 Photodissociation

The chemical shifts of inner-shell atomic orbitals are highly sensitive to chemical bonding and molecular structure. In evolving systems, however, the spectra of distinct molecular species and geometries overlap, obscuring the underlying chemical dynamics. Here we demonstrate the use of electron–ion covariance analysis to combine the structural sensitivity of Coulomb explosion imaging with inner-shell spectroscopy, yielding geometry-specific spectra of transient and product species. We apply this approach to the excited state dynamics of CS 2 probed by ionization above the S 2p edge. Electron–ion covariance with time- and momentum-selected S + and S 2+ ions isolates distinct S 2p photoelectron spectra for ground-state CS 2 , bent photoexcited CS 2 , the CS photoproduct, and bare atomic sulfur ─ species whose spectra overlap strongly in the channel-averaged measurement. Clear chemical shifts are observed in the covariance photoelectron spectrum for each of these species, all of which are consistent with high-level calculations. Here, by extracting the atomic S contribution to the photoelectron spectrum in a finely time-resolved manner we can disentangle this contribution to the overall time-resolved photoelectron spectrum as the photodissociation proceeds. These results demonstrate the promise of electron–ion covariance as a general approach to geometry-resolved inner-shell spectroscopy, opening a route to tracking structural evolution through chemical shifts in complex photoexcited molecules.

Ionization↗
DOE OSTI2025

Towards exact finite temperature electronic structure in solids and molecules (Final Technical Report)

This report describes the University of Iowa portion of a project that is now continuing at Michigan State University. We are developing novel methods, algorithms, and software to enable simulations of molecules and materials at high temperature. This is a key challenge in chemistry and materials science. By refining an approach called Density Matrix Quantum Monte Carlo (DMQMC), we developed faster and more accurate ways to conduct these simulations. These advances will help us understand how temperature affects the behavior of electrons, chemical bonds, and phase transitions in solids and molecules. These breakthroughs are especially important for applications where light and heat drive chemical reactions, superconductivity, and materials used in energy and sensing. In addition, this project involved the development of the open-source HANDE-QMC software package, supporting the broader community in benchmarking and developing finite-temperature electronic structure methods.

36 MATERIALS SCIENCE↗
NASA NTRS1991

Evaluation of Surlyn 8920 as PHE Visor Material and Evaluations of New Adhesives for Improving Bonding Between Teflon and Stainless Steel at Cryogenic Temperature

Two studies are presented, and in the first study, Surlyn 8920 (an ionic and amorphous low density polyethylene made by Dupont) was evaluated as a possible replacement of Plexyglass G as PHE visor material. Four formulations of the polymer were made by adding different amounts of UV stabilizer, energy quencher, and antioxident in a Brabender Plasticorder. The formulated polymers were molded in the form of sheets in a compression molder. Cut samples from the molded sheets were exposed in a weatherometer and tested on Instron Tensile Tester for strength and elongation. Specially molded samples of the formulated polymers were subjected to Charpy Impact Tests. In the second study, preliminary evaluations of adhesives for improvement of bonding between Teflon and stainless steel (SS) were performed. Kapton, a high temperature polyimide made by Dupont, and a rubber based adhesive made by Potter Paint Co., were evaluated against industrial quality epoxy, the current material used to bond Teflon and SS. The degreased surfaces of the SS discs were etched mechanically, with a few of these etched chemically. The surfaces of the SS discs were etched mechanically, with a few of these etched chemically. Bonding strengths were evaluated using lap shear tests on the Instron Tensile Tester for the samples bonded by Kapton and industrial quality epoxy. Bond strengths were also evaluated using a pull test on the Instron for the samples bonded by Potter adhesive (CWL-152) and industrial quality epoxy. Based on limited lap shear data, Kapton gave bond strength favorable compared to that of industrial epoxy. Based on limited pull test data, Kapton bonded and CWL-152 bonded samples showed poor strength compared to epoxy bonded sample.

Ray, Asit K.↗
DOE OSTI2024

Influence of pump laser fluence on ultrafast myoglobin structural dynamics

High-intensity femtosecond pulses from an X-ray free-electron laser enable pump–probe experiments for the investigation of electronic and nuclear changes during light-induced reactions. On timescales ranging from femtoseconds to milliseconds and for a variety of biological systems, time-resolved serial femtosecond crystallography (TR-SFX) has provided detailed structural data for light-induced isomerization, breakage or formation of chemical bonds and electron transfer. However, all ultrafast TR-SFX studies to date have employed such high pump laser energies that nominally several photons were absorbed per chromophore. As multiphoton absorption may force the protein response into non-physiological pathways, it is of great concern whether this experimental approach allows valid conclusions to be drawn vis-à-vis biologically relevant single-photon-induced reactions. Here we describe ultrafast pump–probe SFX experiments on the photodissociation of carboxymyoglobin, showing that different pump laser fluences yield markedly different results. In particular, the dynamics of structural changes and observed indicators of the mechanistically important coherent oscillations of the Fe–CO bond distance (predicted by recent quantum wavepacket dynamics) are seen to depend strongly on pump laser energy, in line with quantum chemical analysis. Our results confirm both the feasibility and necessity of performing ultrafast TR-SFX pump–probe experiments in the linear photoexcitation regime. We consider this to be a starting point for reassessing both the design and the interpretation of ultrafast TR-SFX pump–probe experiments such that mechanistically relevant insight emerges.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

The Origin of Anomalous Density Behavior of Silica Glass

The anomalous density–temperature relationship of vitreous silica with low hydroxyl content is explained by the formation of medium-range ordering structure in the glass transition process. The ordered medium-range structure has the shape of a “nanoflake” and consists of two layers of SiO 4 tetrahedra, bonded by O atoms located in the middle of the structure. The nanoflakes interact with their surrounding structures through both covalent chemical bonds and van der Waals bonds. In the formation of the van der Waals bonds, the orientation of SiO 4 tetrahedra can change, which results in an increase in distance between the nanoflakes and their surrounding structures. Thus, there is a slight volume enlargement associated with the formation of nanoflakes. Since the nanoflakes’ formation starts at a temperature near 1480 °C, and the population of the nanoflakes grows continuously as temperature decreases until about 950 °C, the bulk volume of silica glass increases in the temperature range from about 1480 °C to 950 °C. Therefore, the density anomaly of silica glass can be explained as a byproduct of forming of medium-range ordering structure in the silica glass transition.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Ligand Noninnocence in β-Diketiminate and β-Diketimine Copper Complexes

Metal–ligand cooperative systems have a long precedent in catalysis, with the classification depending on the site of substrate bond cleavage and formation and on redox state changes. Recently, our group reported the participation of a β-diketiminate ligand in chemical bonding to heterocumulenes such as CO 2 and CS 2 by tricopper complexes, leading to cooperative catalysis. Herein, we report the reactivity of these copper clusters, [Cu 3 EL] – (E = S, Se; L = tris(β-diketiminate) cyclophane ligand), toward other electrophiles, viz. alkyl halides and Brønsted acids. We identified a family of ligand-functionalized complexes, Cu 3 EL (R) (R = primary alkyls), and a series of disubstituted products, Cu 3 EL (R) 2 , through single-crystal X-ray diffraction, mass spectrometry, and infrared and UV–visible spectroscopy. Furthermore, as part of mechanistic studies on these alkylation reactions, we evaluated the acid–base reactivity of these complexes and the influence of the backbone substitution on the reduction potential. Implications of these findings for ligand noninnocence and the relevance of the metal core as a cofactor for the ligand’s reactivity are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Releasing chemical energy in spatiallyprogrammed ferroelectrics

Chemical energy ferroelectrics are generally solid macromolecules showing spontaneous polarization and chemical bonding energy. These materials still suffer drawbacks, including the limited control of energy release rate, and thermal decomposition energy well below total chemical energy. To overcome these drawbacks, we report the integrated molecular ferroelectric and energetic material from machine learning-directed additive manufacturing coupled with the ice-templating assembly. The resultant aligned porous architecture shows a low density of 0.35 g cm -3 , polarization-controlled energy release, and an anisotropic thermal conductivity ratio of 15. Thermal analysis suggests that the chlorine radicals react with macromolecules enabling a large exothermic enthalpy of reaction (6180 kJ kg -1 ). In addition, the estimated detonation velocity of molecular ferroelectrics can be tuned from 6.69 ± 0.21 to 7.79 ± 0.25 km s -1 by switching the polarization state. These results provide a pathway toward spatially programmed energetic ferroelectrics for controlled energy release rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1990

On the bonding of La(+) and La(2+) to C2H2, C2H4, and C3H6

The interaction of La(+) and La(2+) with C2H2, C2H4, and C3H6 is studied using electronic structure calculations that include correlation. The calculations show that the bonding in the dication is electrostatic in origin, and the computed binding energies are in good agreement with experiment. The La(+) forms two chemical bonds with the hydrocarbons. Since the pi bond is weaker for C2H2 than C2H4, the La(+)-C2H2 binding energy is larger than for La(+)-C2H4, LaC3H6(+) rearranges to yield a stronger bond than in LaC2H4(+) even though both hydrocarbons have a double bond.

Rosi, Marzio↗
NASA NTRS1999

High Temperature Thermosets

A thermoset or network polymer is an organic material where the molecules are tied together through chemical bonds (crosslinks) and therefore they cannot move past one another. As a result, these materials exhibit a certain degree of dimensional stability. The chemical composition and the degree of crosslink density of the thermoset have a pronounced effect upon the properties. High temperature thermosets offer a favorable combination of properties that makes them attractive for many applications. Their most important features are the excellent processability particularly of the low molecular weight precusor forms, the chemical and solvent resistance and the dimensional stability. The market for high temperature thermosets will increase as new uses for them are uncovered and new thermosets with better combinations of properties are developed.

Hergenrother, Paul M.↗
DOE OSTI2020

Electron Transfer Reactions at the Nexus of Water, Minerals, and Contaminant Metals

The chemistry of natural aquatic systems is fundamentally based on electron transfer reactions. This includes inorganic, organic, and biologic processes, which in the natural environment couple together in complex ways to set the prevailing chemical characteristics of the system. At the molecular scale, electron transfer entails a redistribution of charge between reactants during mutual encounter, a redistri - bution that often breaks or makes new chemical bonds and imparts new properties to the products. These new properties can come in the form of dramatic changes, such as transforming a chemical species from toxic to benign, or from mostly watersoluble to insoluble, leading to nearly instantaneous precipitation of solids.

Rosso, Kevin M.↗
DOE OSTI2025

Investigating the mechanism of copper–carbon interactions in ultraconductor materials via in situ thermal X-ray and Raman spectroscopy

Improving energy transfer efficiency is critical to advancing technologies for a more sustainable future. Nanoscale materials, specifically metal–carbon composites such as ultraconductors, have shown promise in this field due to their enhanced electrical and thermal conductivities. However, the origin of the enhancement has yet to be determined. Prior research has primarily explored these materials at room temperature in an attempt to explain this phenomenon, but these materials have not yet been examined under enhanced thermal conditions. This study probes ultraconductor materials during the heating process to uncover the origins of their enhanced thermal conductivity. Understanding the mechanism underpinning the enhanced properties of the material could lead to increased property enhancement and therefore improved performance in energy transfer technologies. In this work we employ in situ thermal X-ray absorption near edge spectroscopy (XANES) and Raman spectroscopy to characterize copper-based covetic materials, revealing how thermal conditions influence the bonding environment and interaction between the copper and infused carbon. Our findings suggest that heating the materials does not result in the formation of chemical bonds between the carbon and copper framework of the material but rather points to a primarily physical interaction within the sample. Furthermore, we hypothesize possible mechanisms underlying the nature of the physical interaction leading to enhanced properties. These insights contribute to a deeper understanding of the material's behavior under relevant thermal conditions and highlight its potential for integration into next-generation energy systems.

36 MATERIALS SCIENCE↗