Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Catalytic effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Supported molybdenum oxides for the aldol condensation reaction of acetaldehyde

The (retro-)aldol condensation reaction is an important chemical transformation in the upgrading of biomass-derived compounds into fuels and valuable specialty chemicals. In this study, we found that supported molybdenum oxide (MoO x ) catalysts were active and selective for the aldol condensation of acetaldehyde to crotonaldehyde under steady-state reactor conditions. Through a combination of transmission electron microscopy (TEM), ultraviolet–visible (UV–VIS) diffuse reflectance spectroscopy, Fourier transform infrared (FTIR) spectroscopy of adsorbed pyridine, and steady-state reactor testing, we determined that highly dispersed MoO x has a strong interaction with a γ-Al 2 O 3 support resulting in optimal catalyst performance at low weight loadings. In contrast, MoO x particles supported on SiO 2 have a weaker interaction with the support, resulting in a monotonic relationship between Mo loading and aldol condensation activity. The Lewis acid site density and strength are important parameters for predicting aldol condensation activity across all samples. The concentration of weak acid sites had a poor correlation with aldol condensation activity, most likely because these sites are too weak to activate acetaldehyde for the reaction. Medium and strong acid sites both had good correlations to aldol condensation activity. Results from X-ray absorption near edge structure (XANES) and acetaldehyde temperature programmed desorption (TPD) indicated that partially reduced MoO x was more active for aldol condensation, but pretreatment in reducing or oxidizing environments had no significant effect on steady-state catalytic activity. Finally, characterization of spent catalyst samples through temperature programmed oxidation (TPO) and thermogravimetric analysis (TGA) revealed that catalysts with high densities of strong acid sites tended to form more carbonaceous deposits on the surface over the course of the reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Six-coordinate ruthenium water oxidation catalysts bearing equatorial polypyridinedicarboxylato and axial phosphine ligands

Ruthenium catalysts for water oxidation combining multidentate ligands [2,2':6',2"-terpyridine]-6,6"-dicarboxylato (tda) and 2,2'-bipyridine-6,6'-dicarboxylato (bda) with apical phosphine ligands have been prepared. Here, these new complexes were fully characterized by standard spectroscopic and single-crystal X-ray crystallography analyses, and their redox properties were evaluated by electrochemistry. Specifically, [Ru II (tda)(tris(2-furyl)phosphine) 2 ] displayed two reversible redox waves that were assigned to the Ru II/III and Ru III/IV transitions, respectively. The number of turnovers in Ce IV -driven water oxidation reached 258 for the bda analog, and for the tda analog, early reaction rates were first order in initial catalyst concentration. The effects of adding fractional equivalents of Ce IV were studied using UV–vis spectroscopy. Steric and electronic changes in the axial phosphine ligand can exert their effects on the properties and catalytic activity of the resulting complexes, which may be useful when exploring other chemistry of these complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Microkinetic Modeling: A Tool for Rational Catalyst Design

The design of heterogeneous catalysts relies on understanding the fundamental surface kinetics that controls catalyst performance, and microkinetic modeling is a tool that can help the researcher in streamlining the process of catalyst design. Microkinetic modeling is used to identify critical reaction intermediates and rate-determining elementary reactions, thereby providing vital information for designing an improved catalyst. In this review, we summarize general procedures for developing microkinetic models using reaction kinetics parameters obtained from experimental data, theoretical correlations, and quantum chemical calculations. We examine the methods required to ensure the thermodynamic consistency of the microkinetic model. We describe procedures required for parameter adjustments to account for the heterogeneity of the catalyst and the inherent errors in parameter estimation. We discuss the analysis of microkinetic models to determine the rate determining reactions using the degree of rate control and reversibility of each elementary reaction. We introduce incorporation of Brønsted–Evans–Polanyi relations and scaling relations in microkinetic models and the effects of these relations on catalytic performance and formation of volcano curves. We review the analysis of reaction schemes in terms of the maximum rate of elementary reactions, and we outline a procedure to identify kinetically significant transition states and adsorbed intermediates. Here, we explore the application of generalized rate expressions for the prediction of optimal binding energies of important surface intermediates and to estimate the extent of potential rate improvement. We also explore the application of microkinetic modeling in homogeneous catalysis, electro-catalysis, and transient reaction kinetics. We conclude by highlighting the challenges and opportunities in the application of microkinetic modeling for catalyst design.

42 ENGINEERING↗
DOE OSTI2020

High-Entropy Perovskite Fluorides: A New Platform for Oxygen Evolution Catalysis

High-entropy perovskite fluorides (HEPFs) have great potential in electrocatalysis that has not been realized because of the limitation of a high-temperature synthetic route and the limited understanding of high-entropy materials. The use of HEPFs in effective oxygen evolution catalysis and a feasible synthesis route for HEPFs in a boiled solution by combining a hydrothermal method with mechanochemistry are first reported here. These HEPFs consisting of cost-effective elements dramatically gave excellent catalytic activity for the oxygen evolution reaction in an alkaline media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Crystal structure of active CDK4-cyclin D and mechanistic basis for abemaciclib efficacy

Despite the biological and therapeutic relevance of CDK4/6 for the treatment of HR+, HER2- advanced breast cancer, the detailed mode of action of CDK4/6 inhibitors is not completely understood. Of particular interest, phosphorylation of CDK4 at T172 (pT172) is critical for generating the active conformation, yet no such crystal structure has been reported to date. We describe here the x-ray structure of active CDK4-cyclin D3 bound to the CDK4/6 inhibitor abemaciclib and discuss the key aspects of the catalytically-competent complex. Furthermore, the effect of CDK4/6 inhibitors on CDK4 T172 phosphorylation has not been explored, despite its role as a potential biomarker of CDK4/6 inhibitor response. We show mechanistically that CDK4/6i stabilize primed (pT172) CDK4-cyclin D complex and selectively displace p21 in responsive tumor cells. Stabilization of active CDK4-cyclin D1 complex can lead to pathway reactivation following alternate dosing regimen. Consequently, sustained binding of abemaciclib to CDK4 leads to potent cell cycle inhibition in breast cancer cell lines and prevents rebound activation of downstream signaling. Overall, our study provides key insights demonstrating that prolonged treatment with CDK4/6 inhibitors and composition of the CDK4/6-cyclin D complex are both critical determinants of abemaciclib efficacy, with implications for this class of anticancer therapy.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Atomically dispersed Ag on δ-MnO 2 via cation vacancy trapping for toluene catalytic oxidation

The regulation of metal–support interaction (MSI) and the improvement of noble metal utilization are the frontiers of volatile organic compound (VOC) catalytic oxidation. Here, we report a H 2 O 2 -assisted synthesis process for trapping Ag + onto the engineered Mn vacancies of δ-MnO 2 for the catalytic oxidation of toluene. Due to the strong MSI between Ag and δ-MnO 2 , the monoatomic Ag + anchored on cation vacancies forms longer and weakened Ag–O bonds compared with Ag 2 O, which can extra promote the formation of oxygen vacancies and the activation of adjacent lattice oxygen in Ag–O–Mn units compared with regular nanoparticle counterparts. It is beneficial to the steps of methyl dehydrogenation, demethylation, and benzene ring cleavage. The catalyst yields excellent toluene oxidation activity, enhanced turnover frequency in terms of Ag, and good stability. Finally, we propose in this study a facile design strategy for fabricating stably atomically dispersed metal sites, as well as clarify the structure–activity relationships during toluene catalytic oxidation, especially the important effect of single-atom Ag on the adjacent local structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Enhanced and stabilized hydrogen production from methanol by ultrasmall Ni nanoclusters immobilized on defect-rich h-BN nanosheets

Employing liquid organic hydrogen carriers (LOHCs) to transport hydrogen to where it can be utilized relies on methods of efficient chemical dehydrogenation to access this fuel. Therefore, developing effective strategies to optimize the catalytic performance of cheap transition metal-based catalysts in terms of activity and stability for dehydrogenation of LOHCs is a critical challenge. Here, we report the design and synthesis of ultrasmall nickel nanoclusters (∼1.5 nm) deposited on defect-rich boron nitride (BN) nanosheet (Ni/BN) catalysts with higher methanol dehydrogenation activity and selectivity, and greater stability than that of some other transition-metal based catalysts. The interface of the two-dimensional (2D) BN with the metal nanoparticles plays a strong role both in guiding the nucleation and growth of the catalytically active ultrasmall Ni nanoclusters, and further in stabilizing these nanoscale Ni catalysts against poisoning by interactions with the BN substrate. We provide detailed spectroscopy characterizations and density functional theory (DFT) calculations to reveal the origin of the high productivity, high selectivity, and high durability exhibited with the Ni/BN nanocatalyst and elucidate its correlation with nanocluster size and support–nanocluster interactions. This study provides insight into the role that the support material can have both regarding the size control of nanoclusters through immobilization during the nanocluster formation and also during the active catalytic process; this twofold set of insights is significant in advancing the understanding the bottom-up design of high-performance, durable catalytic systems for various catalysis needs.

08 HYDROGEN↗
DOE OSTI2024

Deactivation of Cu/ZSM-5 Catalysts during the Conversion of 2,3-Butanediol to Butenes

This work determines the deactivation mechanisms of Cu/ZSM-5 catalysts used for the conversion of 2,3-butanediol to butene as part of an alcohol-to-jet route. The deactivation of the catalyst, reflected by a drop in the rate of the limiting hydrogenation step by over 90% in 24 h at a weight hourly space velocity of 5.92 h−1, proceeds via both the agglomeration of copper particles and the obstruction of copper surfaces due to carbonaceous deposits, although the former has less impact on the decrease in the hydrogenation rate. To reduce the detrimental effect of carbonaceous deposits on catalytic activity, ZMS-5 is modified through desilication of the HZSM-5 support with NaOH and CsOH solutions to generate a hierarchical structure with mesopores. The catalyst with the CsOH-treated support generates the highest overall yield of desired olefin products and experiences the slowest deactivation. This is a result of the lower Brønsted acidity and larger mesopores found in the CsOH-treated catalyst, leading to the slower formation of carbonaceous deposits and the faster diffusion of their precursors out of the pores.

Chemistry↗
DOE OSTI2025

Workflow for evaluating enzyme immobilization and performance for continuous flow manufacturing

Enzymes have shown promise in various industries due to their functional specificity, catalytic efficiency, and environmental sustainability. These biological catalysts can be a pivotal component of manufacturing pipelines like continuous flow chemistry. For this, there exists a need to robustly immobilize enzymes on solid supports and assess the effects of the solid supports on catalytic performance and stability. Here, we use an industrially relevant model enzyme, C. ensiformis (Jack bean) urease, to demonstrate immobilization and assess performance in the context of continuous flow manufacturing. Various immobilization strategies were screened focusing on immobilization efficiency, protocol simplicity, and urease biocatalyst kinetics. Based on this, CDI-agarose and NHS-agarose resins were identified as the best-performing immobilization strategies for urease. CDI-agarose-urease and NHS-agarose-urease were then scaled up and applied to a large-scale continuous flow reactor to evaluate product yields, operational stability, and long-term stability. These experiments identified differences in stability and performance depending on the immobilization method tested. This highlights the importance of screening immobilization methods and subsequent enzyme performance for each candidate biocatalyst used in manufacturing to promote optimal performance and stability. As such, this work provides a framework for evaluating enzyme biocatalyst immobilization approaches to improve performance and enable transition into industrial processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Silica modulated palladium catalyst with superior activity for the selective catalytic reduction of nitrogen oxides with hydrogen

A significant promotion effect of colloidal SiO 2 on Pd/TiO 2 catalyst for improving the activity and N 2 selectivity in the selective catalytic reduction of NO with H 2 (H 2 -SCR) was reported, both before and after hydrothermal aging. The SiO 2 addition not only benefited the formation of more oxygen vacancies but also increased Pd dispersion and created rich Pd-SiO 2 interfaces on Pd-SiO 2 /TiO 2 catalyst. The H 2 -SCR of NO on both Pd/TiO 2 and Pd-SiO 2 /TiO 2 followed a Langmuir-Hinshelwood mechanism, in which the adsorbed bridging bidentate nitrates on TiO 2 could react with dissociated H 2 species on Pd sites at Pd-TiO 2 interface. Particularly, on the promoted Pd-SiO 2 /TiO 2 , the Pd-TiO 2 interface could facilitate NO adsorption and activation, and the created Pd-SiO 2 interface could benefit H 2 adsorption and dissociation, thus contributing to its significantly improved H 2 -SCR activity. Additionally, the active Pd species (which should be Pd0 under reaction condition with higher surface concentration) within Pd-SiO 2 /TiO 2 could be well stabilized during long-term hydrothermal aging process through the formation of rich Pd-SiO 2 interfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2020

CO 2 Hydrogenation and Formic Acid Dehydrogenation Using Ir Catalysts with Amide-Based Ligands

In this work, a series of Ir catalysts bearing amide-based ligands generated by a deprotonated amide moiety was prepared with the hypotheses that the strong electron-donating ability of the coordinated anionic nitrogen atom and the proton-responsive OH group near the metal center will improve the catalytic activity for CO 2 hydrogenation and formic acid (FA) dehydrogenation. The effects of the modifications of the ligand architecture on the catalytic activity were investigated for CO 2 hydrogenation at ambient conditions (25 °C with 0.1 MPa H 2 /CO 2 (v/v = 1/1)) and under slightly harsher conditions (50 °C with 1.0 MPa H 2 /CO 2 ) in basic aqueous solutions together with deuterium kinetic isotope effects (KIEs) with selected catalysts. Cp*Ir( L12 )(H 2 O)HSO 4 ( L12 = 6-hydroxy- N -phenylpicolinamidate) that has an anionic coordinating N atom and an OH group in the second coordination sphere, exhibits a turnover frequency (TOF) of 198 h –1 based on the initial 1 h of reaction. This TOF which, to the best of our knowledge, is the highest value ever reported under ambient conditions in basic aqueous solutions. However, Cp*Ir( L10 )(H 2 O)HSO 4 ( L10 = (4-hydroxy- N -methylpicolinamidate) performs better in long-term CO 2 hydrogenation (up to a TON of 14 700 with [Ir] = 10 μM after 348 h and the final formate concentration of 0.643 M with [Ir] = 250 μM) at ambient conditions. Further, the catalytic activity for FA dehydrogenation was examined under three different conditions (pH 1.6, 2.3, and 3.5). The Cp*Ir( L12 )(H 2 O)HSO 4 complex in any of these conditions is less active compared to the picolinamidate catalysts without ortho -OH, owing to its instability. The complex without OH group, Cp*Ir( L8 )(H 2 O)HSO 4 ( L8 = N -phenyl-picolinamidate), exhibits a high TOF (up to 118 000 h -1 ) at 60 °C. Theoretical calculations were performed to examine the catalytic mechanism, and a step-by-step mechanism has been proposed for both CO 2 hydrogenation and FA dehydrogenation reactions. Density functional theory calculations of [Cp*Ir( L3 )(H 2 O)]HSO 4 ( L3 = picolinamidate) and the X-ray structure of the [Cp*Ir( L7 )(H)]·H 2 O ( L7 = N -methylpicolinamidate) complex imply a pH-dependent conformational change from N , N coordination to N , O coordination upon lowering the pH of the aqueous solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Targeted sulfur(VI) fluoride exchange-mediated covalent modification of a tyrosine residue in the catalytic pocket of tyrosyl-DNA phosphodiesterase 1

Abstract Developing effective inhibitors of the DNA repair enzyme tyrosyl-DNA phosphodiesterase 1 (TDP1) has been challenging because of the enzyme shallow catalytic pocket and non-specific substrate binding interactions. Recently, we discovered a quinolone-binding hot spot in TDP1’s active site proximal to the evolutionary conserved Y204 and F259 residues that position DNA. Sulfur (VI) fluoride exchange (SuFEx) is a biocompatible click chemistry reaction that enables acylation of protein residues, including tyrosine. Selective protein modifications can provide insights into the biological roles of proteins and inform ligand design. As we report herein, we used SuFEx chemistries to prepare covalent TDP1-bound binders showing site-specific covalent bonds with Y204. Our work presents the first application of SuFEx chemistries to TDP1 ligands. It validates the ability to covalently modify specific TDP1 residues by designed targeting and adds to the chemical biology resource toolbox for studying TDP1.

Chemistry↗
DOE OSTI2020

Understanding solvent effects on adsorption and protonation in porous catalysts

Abstract Solvent selection is a pressing challenge in developing efficient and selective liquid phase catalytic processes, as predictive understanding of the solvent effect remains lacking. In this work, an attenuated total reflection infrared spectroscopy technique is developed to quantitatively measure adsorption isotherms on porous materials in solvent and decouple the thermodynamic contributions of van der Waals interactions within zeolite pore walls from those of pore-phase proton transfer. While both the pore diameter and the solvent identity dramatically impact the confinement (adsorption) step, the solvent identity plays a dominant role in proton-transfer. Combined computational and experimental investigations show increasingly favorable pore-phase proton transfer to pyridine in the order: water < acetonitrile < 1,4 – dioxane. Equilibrium methods unaffected by mass transfer limitations are outlined for quantitatively estimating fundamental thermodynamic values using statistical thermodynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Identifying Support Effects in Au-Catalyzed CO Oxidation

Some catalytic oxide supports are more equal than others, with numerous variable properties ranging from crystal symmetry to surface chemistry and electronic structure. As a consequence, it is often very difficult to determine which of these act as the driver of performance changes observed in catalysis. In this work, we hold many of these variable properties constant with structurally similar LnScO 3 (Ln = La, Sm, and Nd) nanoparticle supports with cuboidal shapes and a common Sc-rich surface termination. Using CO oxidation over supported Au nanoparticles as a probe reaction, we observe higher activation energy and a slower rate using NdScO 3 as the support material. This change is found to correlate to the strength of CO 2 binding to the support surface, identified by temperature-programmed desorption measurements. Furthermore, the change is due to differences in the 4f electrons of the lanthanide cations, the cations’ Lewis acidity, and the inductive effect they impose.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Decoupling of catalysis and transition state analog binding from mutations throughout a phosphatase revealed by high-throughput enzymology

Using high-throughput microfluidic enzyme kinetics (HT-MEK), we measured over 9,000 inhibition curves detailing impacts of 1,004 single-site mutations throughout the alkaline phosphatase PafA on binding affinity for two transition state analogs (TSAs), vanadate and tungstate. As predicted by catalytic models invoking transition state complementary, mutations to active site and active-site-contacting residues had highly similar impacts on catalysis and TSA binding. Unexpectedly, most mutations to more distal residues that reduced catalysis had little or no impact on TSA binding and many even increased tungstate affinity. These disparate effects can be accounted for by a model in which distal mutations alter the enzyme’s conformational landscape, increasing the occupancy of microstates that are catalytically less effective but better able to accommodate larger transition state analogs. In support of this ensemble model, glycine substitutions (rather than valine) were more likely to increase tungstate affinity (but not more likely to impact catalysis), presumably due to increased conformational flexibility that allows previously disfavored microstates to increase in occupancy. These results indicate that residues throughout an enzyme provide specificity for the transition state and discriminate against analogs that are larger only by tenths of an Ångström. Thus, engineering enzymes that rival the most powerful natural enzymes will likely require consideration of distal residues that shape the enzyme’s conformational landscape and fine-tune active-site residues. Biologically, the evolution of extensive communication between the active site and remote residues to aid catalysis may have provided the foundation for allostery to make it a highly evolvable trait.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Adsorbate-Induced Adatom Formation on Lithium, Iron, Cobalt, Ruthenium, and Rhenium Surfaces

Recent experimental and theoretical studies have demonstrated the reaction-driven metal–metal bond breaking in metal catalytic surfaces even under relatively mild conditions. Here, we construct a density functional theory (DFT) database for the adsorbate-induced adatom formation energy on the close-packed facets of three hexagonal close-packed metals (Co, Ru, and Re) and two body-centered cubic metals (Li and Fe), where the source of the ejected metal atom is either a step edge or a close-packed surface. For Co and Ru, we also considered their metastable face-centered cubic structures. We studied 18 different adsorbates relevant to catalytic processes and predicted noticeably easier adatom formation on Li and Fe compared to the other three metals. The NH 3 - and CO-induced adatom formation on Fe(110) is possible at room temperature, a result relevant to NH 3 synthesis and Fischer-Tropsch synthesis, respectively. There also exist other systems with favorable adsorbate effects for adatom formation relevant to catalytic processes at elevated temperatures (500–700 K). Our results offer insight into the reaction-driven formation of metal clusters, which could play the role of active sites in reactions catalyzed by Li, Fe, Co, Ru, and Re catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Spin State Modulation via Magnetic Fields in Fe Single Atom Catalysts for High-Performance Aqueous Zinc–Sulfur Batteries

Aqueous zinc–sulfur battery has garnered significant attention as a high-energy, low-cost, and safe energy storage system. However, the multielectron transfer kinetics of sulfur cathodes are relatively slow, presenting challenges such as limited sulfur utilization and lower discharge voltage, which significantly hinder their practical applications. Here, in this study, we explored a comprehensive design approach for high-performance, long-cycle aqueous zinc–sulfur batteries. The simultaneous introduction of ZnI 2 and Fe single atoms (Fe-SAs) as catalytically active agents decouples the redox reactions, effectively facilitating ZnS oxidation and S reduction separately. The application of an external magnetic field regulates the spin state of Fe-SAs, further enhancing their catalytic activity and electron transfer capability. Electrochemical tests demonstrate that the S@Fe-NC HS/ZnI 2 cathode assembled under a magnetic field exhibits excellent rate performance, achieving an impressive specific capacity of 1399 mAh g –1 at a high current density of 5 A g –1 and good cycling stability over 300 cycles, representing the highest reported high-current discharge capacity to date. This study provides a comprehensive design framework for optimizing zinc–sulfur (Zn–S) battery performance and elucidates the influence of magnetic field-induced spin state modulation on catalytic behavior.

36 MATERIALS SCIENCE↗