Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CRYSTAL MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

A viscoplastic model for single crystals

A viscoplastic constitutive model is described in which deformation behavior is postulated on representative slip systems and the behavior of the entire crystal is determined by summing the slip on the active slip systems. By building in the slip geometry known from the metallurgical literature, it is possible to predict the anisotropic deformation behavior and to model in a straightforward manner other phenomena which have been described by metallurgists in crystallographic terms. Elevated temperature tension-torsion tests were run and used to verify the model's predictive abilities. Ratchetting behavior under thermomechanical loading conditions is specifically addressed.

Jordan, E. H.↗

Classification of fragile topology enabled by matrix homotopy

Flat bands in twisted materials have attracted considerable attention due to the emergence of correlated phases that can be associated with the non-Wannier-representable nature of its single-particle states. Specifically, these bands can exhibit a class of topology that can be nullified by the addition of trivial bands, termed fragile topology, which has required an expansion of prior classification schemes. However, existing approaches for predicting fragile topology rely on momentum-space methods, e.g., Wilson loops, presenting a fundamental challenge for using fragile topology as a predictor of correlated phases in aperiodic systems, such as incommensurate twist angles in moiré materials. Here, we develop a ℤ 2 energy-resolved topological marker for classifying fragile phases using a system’s position-space description, enabling the direct classification of finite, disordered, and aperiodic materials. By translating the physical symmetries protecting the system’s fragile topological phase into matrix symmetries of the system’s Hamiltonian and position operators, we use matrix homotopy to construct our topological marker while simultaneously yielding a quantitative measure of topological robustness. We demonstrate our framework’s effectiveness in both a low-energy tight-binding model and a continuum photonic crystal model of 𝐶 2 ⁢𝒯-symmetric systems, and find that fragile topology can both persist under strong disorder and even exhibit disorder-induced reentrant phase transitions. Our photonic crystal results also demonstrate the robustness of fragile topology, and the applicability of our approach, to heterostructures lacking a bulk spectral gap. Overall, our framework serves as an efficient tool for elucidating fragile topology, offering guidance for the prediction and discovery of correlated phases in both crystalline and aperiodic materials.

Lee, Ki Young [Sandia National Laboratories (SNL-N↗

Fast and accurate implementation of Fourier spectral approximations of nonlocal diffusion operators and its applications

This work is concerned with the Fourier spectral approximation of various integral differential equations associated with some linear nonlocal diffusion and peridynamic operators under periodic boundary conditions. For radially symmetric kernels, the nonlocal operators under consideration are diagonalizable in the Fourier space so that the main computational challenge is on the accurate and fast evaluation of their eigenvalues or Fourier symbols consisting of possibly singular and highly oscillatory integrals. For a large class of fractional power-like kernels, we propose a new approach based on reformulating the Fourier symbols both as coefficients of a series expansion and solutions of some simple ODE models. We then propose a hybrid algorithm that utilizes both truncated series expansions and high order Runge–Kutta ODE solvers to provide fast evaluation of Fourier symbols in both one and higher dimensional spaces. It is shown that this hybrid algorithm is robust, efficient and accurate. As applications, we combine this hybrid spectral discretization in the spatial variables and the fourth-order exponential time differencing Runge–Kutta for temporal discretization to offer high order approximations of some nonlocal gradient dynamics including nonlocal Allen–Cahn equations, nonlocal Cahn–Hilliard equations, and nonlocal phase-field crystal models. Numerical results show the accuracy and effectiveness of the fully discrete scheme and illustrate some interesting phenomena associated with the nonlocal models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimizing Batch Crystallization with Model-based Design of Experiments

Adaptive and self-optimizing intelligent systems such as digital twins are increasingly important in science and engineering. Digital twins utilize mathematical models to provide added precision to decision-making. However, physics-informed models are challenging to build, calibrate, and validate with existing data science methods. Model-based design of experiments (MBDoE) is a popular framework for optimizing data collection to maximize parameter precision in mathematical models and digital twins. In this work, we apply MBDoE, facilitated by the open-source package Pyomo.DoE, to train and validate mathematical models for batch crystallization. We quantitatively examined the estimability of the model parameters for experiments with different cooling rates. This analysis provides a quantitative explanation for the heuristic of using multiple experiments at different cooling rates.

Lynch, Hailey↗

Thermal Modeling of Bridgman Crystal Growth

Heat Flow modeled for moving or stationary rod shaped sample inside directional-solidification furnace. Program effectively models one-dimensional heat flow in translating or motionless rod-shaped sample inside of directionalsolidification furnace in which adiabatic zone separates hot zone and cold zone. Applicable to systems for which Biot numbers in hot and cold zones are less than unity.

Cothran, E.↗

Follow up on the crystal growth experiments of the LDEF

The results of the 4 solution growth experiments on the LDEF have been published elsewhere. Both the crystals of CaCO3, which were large and well shaped, and the much smaller TTF-TCNQ crystals showed unusual morphological behavior. The follow up on these experiments was begun in 1981, when ESA initiated a 'Concept Definition Study' on a large, 150 kg, Solution Growth Facility (SGF) to be included in the payload of EURECA-1, the European Retrievable Carrier. This carrier was a continuation of the European Spacelab and at that time planned for launch in 1987. The long delay of the LDEF retrieval and of subsequent missions brought about reflections both on the concept of crystal growth in space and on the choice of crystallization materials that had been made for the LDEF. Already before the LDEF retrieval, research on TTF-TCNQ had been stopped, and a planned growth experiment with TTF-TCNQ on the SGF/EURECA had been cancelled. The target of the SGF investigation is now more fundamental in nature. None of the crystals to be grown here are, like TTF-TCNQ, in particular demand by science or industry, and the crystals only serve the purpose of model crystals. The real purpose of the investigation is to study the growth behavior. One of the experiments, the Soret Coefficient Measurement experiment is not growing crystals at all, but has it as its sole purpose to obtain accurate information on thermal diffusion, a process of importance in crystal growth from solution.

Nielsen, K. F.↗

Development of the Local (Site) Symmetry Method in the Supercell Model for a Crystal with an Impurity

Symmetry aspects of the periodic model of a crystal with a point defect (a supercell model or a extended unit cell (EUC) model) are considered; splitting of the Wyckoff positions in a primitive crystal cell with the introduction of supercell and the change of the one-electron states classification over k-vector (Brillouin zone folding) are discussed. When considering a point defect in a crystal in the supercell model, it is necessary to take into account the symmetry of the one-electron states of the original crystal at the top of the valence band and at the bottom of the conduction band. The selected supercell should reproduce these states. Each specific selection of a supercell corresponds to a specific splitting of the Wyckoff positions of the original crystal and, as a result, the possibility to place a defect in positions with different point symmetry and to perform a calculation without taking into account the point symmetry of the crystal with a defect at all (site symmetry method). By the results of the calculation of a crystal with a defect in the supercell model, taking into account site symmetry, it is possible to determine the real symmetry of the crystal with a defect, which is essential for the interpretation of experimental data. A copper impurity in a lithium node in a LiCl crystal retains the cubic symmetry of the atom being replaced; the impurity of an iron atom in a titanium site with cubic local symmetry in a SrTiO{sub 3} crystal lowers the symmetry to tetragonal; and the H site in the CsPbI{sub 3} crystal is characterized by the complete removal of point symmetry with the formation of an I{sub 2}{sup −} ion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multiparameter radar and microwave radiative transfer modeling of nonspherical atmospheric ice particles

Multiparameter radar and polarized microwave radiative transfer models for arbitrarily shaped particles are developed. The ice crystals modeled are horizontally oriented hexagonal plates, columns, and needles. The ice water content is fixed at 0.1 g/cu m, and a realistic size distribution is used. The radar modeling is done for S through K-band, and the passive microwave calculations are at 37, 85, and 157 GHz. The modeling results show that particle shape is important for both multiparameter radar and passive microwave radiometry. Radar reflectivity and upwelling microwave brightness temperatures depend strongly on the individual particle volume, which in turn depends on the ice crystal shape. Radar differential reflectivity is high for the plates and lower for needles and columns. Linear depolarization calculations indicate that oblate ice crystals such as plates can be distinguished from prolate crystals such as columns. At 85 and 157 GHz, significant polarization brightness temperature differences are calculated for plates and columns. The particle bulk density strongly affects the radar and radiometer observables. Recent measurements of ice crystals are discussed to show that the model results have practical applicability.

Evans, K. Franklin↗

A Proposed Model for Protein Crystal Nucleation and Growth

How does one take a molecule, strongly asymmetric in both shape and charge distribution, and assemble it into a crystal? We propose a model for the nucleation and crystal growth process for tetragonal lysozyme, based upon fluorescence, light, neutron, and X-ray scattering data, size exclusion chromatography experiments, dialysis kinetics, AFM, and modeling of growth rate data, from this and other laboratories. The first species formed is postulated to be a 'head to side' dimer. Through repeating associations involving the same intermolecular interactions this grows to a 4(sub 3) helix structure, that in turn serves as the basic unit for nucleation and subsequent crystal growth. High salt attenuates surface charges while promoting hydrophobic interactions. Symmetry facilitates subsequent helix-helix self-association. Assembly stability is enhanced when a four helix structure is obtained, with each bound to two neighbors. Only two unique interactions are required. The first are those for helix formation, where the dominant interaction is the intermolecular bridging anion. The second is the anti-parallel side-by-side helix-helix interaction, guided by alternating pairs of symmetry related salt bridges along each side. At this stage all eight unique positions of the P4(sub3)2(sub 1),2(sub 1) unit cell are filled. The process is one of a) attenuating the most strongly interacting groups, such that b) the molecules begin to self-associate in defined patterns, so that c) symmetry is obtained, which d) propagates as a growing crystal. Simple and conceptually obvious in hindsight, this tells much about what we are empirically doing when we crystallize macromolecules. By adjusting the growth parameters we are empirically balancing the intermolecular interactions, preferentially attenuating the dominant strong (for lysozyme the charged groups) while strengthening the lesser strong (hydrophobic) interactions. In the general case for proteins the lack of a singularly defined association pathway may lead to formation of multiple species, i.e., amorphous precipitation. Weak interactions, such as hydrogen bonds, are promiscuous, serving to strengthen rather than define specific interactions. Participation in an interaction sequesters that surface from subsequent interactions, and we expect the strongest bonds to form first. This model, its basis, how it fits into the currently understood osmotic second virial coefficient approach to crystallization, and what it suggests will be discussed.

Pusey, Marc↗

In situ synchrotron powder diffraction study of the setting reaction kinetics of magnesium-potassium phosphate cements

This work reports a kinetic study of the formation of magnesium-potassium phosphate cements accomplished using in-situ synchrotron powder diffraction. The reaction: MgO + KH{sub 2}PO{sub 4} + 5H{sub 2}O → MgKPO{sub 4} · 6H{sub 2}O was followed in situ in the attempt of contributing to explain the overall mechanism and assess the influence of periclase (MgO) grain size and calcination temperature (1400-1600 °C) on the reaction kinetics. Numerical kinetic parameters for the setting reaction have been provided for the first time. The best fit to the kinetic data was obtained using a weighted nonlinear model fitting method with two kinetic equations, representing two consecutive, partially overlapping processes. MgO decomposition could be described by a first order (F1) model followed by a Jander diffusion (D3) controlled model. Crystallization of the product of reaction was modelled using an Avrami model (A{sub n}) followed by a first order (F1) chemical reaction. A reaction mechanism accounting for such results has been proposed.

36 MATERIALS SCIENCE↗

Spectral Line Shape Variations in Time-Resolved Photoemission from a Solid

Laser assisted photoemission by a subfemtosecond ultraviolet pulse is studied by solving the time-dependent Schroedinger equation for a one-dimensional model crystal. Without the laser field, the shape and the energy location of the spectrum are determined by the energy dependence of the photoemission cross section. In the presence of the laser field, the time growth of the population of the final state is predicted to cause extremely sharp variations of spectral width as a function of release time. This can help enhance time resolution of the measurements. A simple phenomenological model to describe the line shape is proposed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Revealing the hidden structure of disordered materials by parameterizing their local structural manifold

Abstract Durable interest in developing a framework for the detailed structure of glassy materials has produced numerous structural descriptors that trade off between general applicability and interpretability. However, none approach the combination of simplicity and wide-ranging predictive power of the lattice-grain-defect framework for crystalline materials. Working from the hypothesis that the local atomic environments of a glassy material are constrained by enthalpy minimization to a low-dimensional manifold in atomic coordinate space, we develop a generalized distance function, the Gaussian Integral Inner Product (GIIP) distance, in connection with agglomerative clustering and diffusion maps, to parameterize that manifold. Applying this approach to a two-dimensional model crystal and a three-dimensional binary model metallic glass results in parameters interpretable as coordination number, composition, volumetric strain, and local symmetry. In particular, we show that a more slowly quenched glass has a higher degree of local tetrahedral symmetry at the expense of cyclic symmetry. While these descriptors require post-hoc interpretation, they minimize bias rooted in crystalline materials science and illuminate a range of structural trends that might otherwise be missed.

36 MATERIALS SCIENCE↗

Surface structure of the liquid Au[subscript 72]Ge[subscript 28] eutectic phase: X-ray reflectivity

The surface structure of the liquid phase of the Au{sub 72}Ge{sub 28} eutectic alloy has been measured using resonant and nonresonant x-ray reflectivity and grazing incidence x-ray diffraction. In spite of the significant differences in the surface tension of liquid Ge and Au the Gibbs adsorption enhancement of Ge concentration at the surface is minimal. This is in striking contrast to all the other binary alloys with large differences in the respective surface tensions measured up to date. In addition there is no evidence of the anomalous strong surface layering or in-plane crystalline order that has been reported for the otherwise quite similar liquid Au{sub 82}Si{sub 18} eutectic. Instead, the surface of eutectic Au{sub 72}Ge{sub 28} is liquidlike and the layering can be explained by the distorted crystal model with only slight modifications to the first layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

One-dimensional electronic transport at the organic charge-transfer interfaces under high pressures

We have characterized the charge transport properties of the electronic state at the interface between tetrathiofulvalene and 7,7,8,8-tetracyanoquinodimethane organic crystals as a function of pressure. At low temperature and for all studied pressures, the conductance and the current through the interface exhibit a power-law dependence on both temperature and bias voltage which reveal features of quasi-one-dimensional character. The transport behavior as well as the pressure dependence of the power-law exponent is consistent with a one-dimensional Wigner crystal model. Our results demonstrate that organic heterointerfaces can provide an ideal platform for exploring the rich electronic phenomena in low-dimensional systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Inorganic and Protein Crystal Assembly in Solutions

The basic kinetic and thermodynamic concepts of crystal growth will be revisited in view of recent AFM and interferometric findings. These concepts are as follows: 1) The Kossel crystal model that allows only one kink type on the crystal surface. The modern theory is developed overwhelmingly for the Kessel model; 2) Presumption that intensive step fluctuations maintain kink density sufficiently high to allow applicability of Gibbs-Thomson law; 3) Common experience that unlimited step bunching (morphological instability) during layer growth from solutions and supercooled melts always takes place if the step flow direction coincides with that of the fluid.

Chernov, A. A.↗

Constitutive modeling for single crystal superalloys

A crystallographic approach to constitutive modeling of single crystal superalloys is discussed. The approach is based on identifying the active slip planes and slip directions. The shear stresses are computed on each of the slip planes from applied stress components. The slip rate is then computed on each slip system and the microscopic inelastic strain rates are the sum of the slip in the individual slip systems. The constitutive model was implemented in a finite element code using twenty noted isoparametric solid elements. Constants were determined for octahedral and cube slip systems. These constants were then used to predict tension-compression asymmetry and fatigue loops. Other data was used to model the tensile and creep response.

Stouffer, Donald C.↗