Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMPUTER CALCULATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Satellite Power Systems (SPS) concept definition study. Volume 6: In-depth element investigation

The fabrication parameters of GaAs MESFET solid-state amplifiers considering a power added conversion efficiency of at least 80% and power gains of at least 10dB were determined. Operating frequency was 2.45 GHz although 914 MHz was also considered. Basic circuit to be considered was either Class C or Class E amplification. Two modeling programs were utilized. The results of several computer calculations considering differing loads, temperatures, and efficiencies are presented. Parametric data in both tabular and plotted form are presented.

Hanley, G. M.↗
NASA NTRS1979

Characteristics of primary electric propulsion systems

The use of advanced electric propulsion systems will provide cost and performance benefits for future energetic space missions. A methodology to predict the characteristics of advanced electric propulsion systems was developed and programmed for computer calculations to allow evaluation of a broad set of technology and mission assumptions. The impact on overall thrust system characteristics was assessed for variations of propellant type, total accelerating voltage, thruster area, specific impulse, and power system approach. The data may be used both to provide direction to technology emphasis and allow for preliminary estimates of electric propulsion system properties for a wide variety of application.

Byers, D. C.↗
NASA NTRS1979

Efficiency enhancement of coupled-cavity TWT's through cavity resonance tapering

The paper examines efficiency enhancement of coupled-cavity traveling-wave tube (TWT) through cavity resonance tapering. Beam-wave resynchronization through circuit velocity reduction is used for TWT efficiency enhancement, with circuit velocity reduction in coupled cavity TWT's accomplished through period tapering. However, the amount of the latter is limited by the stability considerations, so that beyond a critical value of velocity reduction, the tube may be subject to zero drive oscillations originating in the velocity taper region. The coupled-cavity resonance tapering allows the velocity reduction to continue beyond the limit of stable period tapering, and it is accomplished by a gradual reduction in the cavity resonance frequency, with the period and the circuit bandwidth unchanged. The advantages of cavity resonance tapering vs period tapering are discussed, and test data are presented with the results of large-signal computer calculations. It is shown that cavity resonance tapering can produce efficiencies as period tapering without incurring the same risk of lower band-edge oscillations.

Connolly, D. J.↗
NASA NTRS1980

Constrained optimum trajectories with specified range

The characteristics of optimum fixed-range trajectories whose structure is constrained to climb, steady cruise, and descent segments are derived by application of optimal control theory. The performance function consists of the sum of fuel and time costs, referred to as direct operating costs (DOC). The state variable is range-to-go and the independent variable is energy. In this formulation a cruise segment always occurs at the optimum cruise energy for sufficiently large range. At short ranges (500 n. mi. and less) a cruise segment may also occur below the optimum cruise energy. The existence of such a cruise segment depends primarily on the fuel flow vs thrust characteristics and on thrust constraints. If thrust is a free control variable along with airspeed, it is shown that such cruise segments will not generally occur. If thrust is constrained to some maximum value in climb and to some minimum in descent, such cruise segments generally will occur. The performance difference between free thrust and constrained thrust trajectories has been determined in computer calculations for an example transport aircraft.

Erzberger, H.↗
NASA NTRS1980

Primordial refractory metal particles in the Allende meteorite

Refractory metal particles containing Os, Re, W, Mo, Ir, and Ru were observed in a Ca-Al-rich inclusion in the Allende meteorite. These particles are the closest to unaltered primordial metal condensates from a nebula yet reported, and appear to have been isolated from the nebula before the condensation of refractories was complete. Computer calculations of condensation indicate that the temperature of isolation appears to be close to the calculated temperature of first formation of oxides (about 1620 K at 0.0001 atm) indicating that isolation may have been effected by coating of the particles by oxides.

Blander, M.↗
NASA NTRS1980

The determination of transport parameters of minority carriers in n-p junctions by means of an electron microscope - Critique of recent developments

It has recently been shown that amplitude modulated electron beams provide a novel means for the determination of minority carrier lifetimes, diffusion lengths, etc., in n-p junctions. In this paper it is shown that: (1) a recently published analysis based on a cylindrically symmetric configuration is incorrect, (2) the correct approach leads to a system of dual integral equations for which the formal solution is given, (3) in general, the short circuit current can only be determined by means of extensive computer calculations except in the case of large front surface recombination velocities, and (4) the difficulties encountered with cylindrically symmetric configurations (circular ohmic contacts and the like) are completely avoided with a choice of a planar geometry since simple closed form expressions for the short circuit current are readily available in this case.

Von Roos, O.↗
NASA NTRS1980

Acoustic pressures on a prop-fan aircraft fuselage surface

Acoustic pressure amplitude and phase distributions on the surface of a simulated fuselage (a rigid semi-cylinder) installed in an acoustically treated wind tunnel near a Prop-Fan model were measured. The test conditions simulated the relative tip Mach number and blade loading of a full scale Prop-Fan at high altitude 0.8 Mach number cruise. Measurements were also made at equivalent microphone locations without the semi-cylinder to establish the effects of the presence of a fuselage on the sound pressure amplitudes. These effects were found to be 6 dB at 90 degrees incidence, decreasing to no effect at grazing incidence. Comparison of measurements and calculations using a Hamilton Standard Prop-Fan noise calculation computer program showed good agreement in peak level and in phase distribution. Continuous recordings were also made of a Prop-Fan RPM sweep at constant simulated flight speed and a simulated flight speed sweep at constant Prop-Fan RPM. These showed smooth variations in noise level over the tip Mach number range 0.878 to 1.143.

Magliozzi, B.↗
NASA NTRS1980

Transmission in flow ducts with peripherally varying linings

A finite element Galerkin formulation is used for the calculation of acoustical modes in uniform ducts with arbitrary geometry, mean flow and lining configuration. Hermitian 'non-conforming' sub-parametric elements are used and the dimensionality of the resulting eigenmatrix is reduced by the use of a condensation scheme based on the compatible eigenvectors in the case with no mean flow. Results are presented for simple circular and rectangular configurations for which exact comparison results are readily calculable. Computer graphics routines required to interpret modal data are described and sample results shown.

Astley, R. J.↗
NASA NTRS1980

Theoretical results on the double-collecting tandem junction solar cell

Results of computer calculations using a one dimensional model of the silicon tandem junction solar cell with both front and back current collection are presented. Using realistically achievable geometrical and material parameters, the model predicts that with base widths of 50 micrometers and 100 micrometers and base resistivities between 1 ohm/cm and 20 ohm/cm, beginning of life efficiencies of 14% to 17% and end of life efficiencies of 12% to 14%, after about seven years in synchronous orbit, can be obtained.

Goradia, C.↗
NASA NTRS1982

A coded aperture gamma ray telescope

A gamma ray telescope is being developed to operate in the energy range 100 keV to 5 MeV, utilizing coded aperture imaging. The design incorporates a mask pattern based on a Uniformly Redundant Array (URA), which has been shown to have ideal imaging characteristics. A mask-anti-mask procedure is used to eliminate the effects of any possible systematic variations in detector background rates. The detector array is composed of 35 elements of the high-Z material Bismuth Germanate (BGO). Results of laboratory testing of the imaging properties will be presented. A southern hemisphere balloon flight is planned for 1982 with the goal of observing the 0.511 MeV radiation from the Galactic Center. Computer calculations show that a point source of this radiation can be located to within + or - 1 deg.

Mcconnell, M. L.↗
NASA NTRS1982

Cometary NH - Ultraviolet and submillimeter emission

A description is presented of the results of computer calculations on the molecule NH, which is an important constituent of cometary comae, and a probable, but an as yet undetected, interstellar species. Attention is given to spectroscopic properties, the treatment of solar spectral data, and radiative transfer calculations. The results of calculations for the Einstein A-coefficients are given in an appendix, where the entries for the X-X and A-A transitions depend on the assumed permanent electric-dipole moment squared. Rotational-spin-Lambda-doublet energy levels used for statistical equilibrium population densities are listed in a table.

Litvak, M. M.↗
NASA NTRS1981

Z-model analysis of impact cratering - An overview

The Maxwell Z-Model has been applied to two continuum mechanics computer calculations: (1) a laboratory-scale impact of an aluminum projectile into plasticene clay, and (2) a planetary-scale impact of an iron meteor into gabbroic anorthosite. The material flow in the cratering flow field may be well approximated by incompressible flow for most of the excavation stage of crater growth. The center of the flow field is located beneath, not at, the surface. Soon after energy partitioning is complete, Z can assume values less than 2.0 associated with the initial directedness of the projectile's momentum. The Z-Model parameters are time dependent during a significant portion of the crater growth time, and Z increases steadily with time from about 2.0 or slightly less at the beginning of the excavation stage to level off at values in the neighborhood of about 3.0 before the excavation stage is half-over.

Austin, M. G.↗
NASA NTRS1983

Interpulse kinetics in copper and copper halide lasers

The various rate processes that govern the interpulse relaxation in metal vapor and metal halide vapor lasers are considered. Computer calculations indicate that the rapid metastable levels relaxation observed in copper and copper halide laser experiments requires the existence of a relatively small resonance in the cross section for metastable excitation or deexcitation near threshold. The accurate calculation of interpulse relaxation requires knowledge of rate constants presently not well known; this is especially so for metal halide lasers.

Harstad, K. G.↗
NASA NTRS1982

The dependence of the shape and stability of captive rotating drops on multiple parameters

Asymptotic and numerical techniques in bifurcation theory are applied to the Young-Laplace equation governing meniscus shape in order to analyze the dependence of the shape and stability of rigidly rotating drops held captive between corotating solid faces on multiple parameters. Asymptotic analysis of the evolution of drop shape from the cylindrical as a function of distance between the solid faces, drop volume, rotational Bond number and gravitational Bond number shows that some shape bifurcations from cylinders to wavy, axisymmetric menisci are ruptured by small changes in drop volume or gravity. Computer calculations of axisymmetric drop shapes based on a finite element representation of the interface and numerical algorithms for tracking shape families and singular points are then used to map drop stability for the four-dimensional parameter space. The results of the asymptotic and numerical analyses are shown to agree well within the limited range of parameters where the asymptotic analysis is valid.

Ungar, L. H.↗
NASA NTRS1986

Keyboard With Voice Output

Voice synthesizer tells what key is about to be depressed. Verbal feedback useful for blind operators or where dim light prevents sighted operator from seeing keyboard. Also used where operator is busy observing other things while keying data into control system. Used as training aid for touch typing, and to train blind operators to use both standard and braille keyboards. Concept adapted to such equipment as typewriters, computers, calculators, telephones, cash registers, and on/off controls.

Huber, W. C.↗
NASA NTRS1984

Wave multiple scattering by a finite number of unclosed circular cylinders

The boundary value problem of plane H-polarized electromagnetic wave multiple scattering by a finite number of unclosed circular cylinders is solved. The solution is obtained by two different methods: the method of successive scattering and the method of partial matrix inversion for simultaneous dual equations. The advantages of the successive scattering method are shown. Computer calculations of the suface currents and the total cross section are presented for the structure of two screens.

Veliyev, E. I.↗
NASA NTRS1985

Theory of the high base resistivity n(+)pp(+) silicon solar cell and its application to radiation damage effects

Particulate radiation in space is a principal source of silicon solar cell degradation, and an investigation of cell radiation damage at higher base resistivities appears to have implication toward increasing solar cell and, therefore, useful satellite lifetimes in the space environment. However, contrary to expectations, it has been found that for cells with resistivities of 84 and 1250 ohm cm, the radiation resistance decreases as cell base resistivity increases. An analytical solar-cell computer model was developed with the objective to determine the reasons for this unexpected behavior. The present paper has the aim to describe the analytical model and its use in interpreting the behavior, under irradiation, of high-resistivity solar cells. Attention is given to boundary conditions at the space-charge region edges, cell currents, cell voltages, the generation of the theoretical I-V characteristic, experimental results, and computer calculations.

Goradia, C.↗
NASA NTRS1985

Inviscid analysis of advanced turboprop propeller flow fields

A three-dimensional Euler code, previously developed for high speed propellers, was rewritten and vectorized for the Cray computer. Calculations were compared with previous results and measurements. The new code requires less memory and is more than two times faster than its predecessor. The new boundary conditions produced more accurate results and improved stability. The accuracy and stability characteristics also resulted in reduced manual intervention required to obtain solutions. The code is a useful tool for examining the fluid dynamics and performance of propellers.

Barton, J. M.↗