Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CITRIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

A Thermodynamic Investigation of the Redox Properties of Ceria-Titania Mixed Oxides

Ceria-titania solutions with compositions of Ce0.9Ti0.1O2 and Ce0.8Ti0.2O2 were prepared by the citric-acid (Pechini) method and characterized using X-ray diffraction (XRD) for structure, coulometric titration for redox thermodynamics, and water-gas-shift (WGS) reaction rates. Following calcination at 973 K, XRD suggests that the mixed oxides exist as single phase, fluorite structures, although there was no significant change in the lattice parameter compared to pure ceria. The mixed oxides are shown to be significantly more reducible than bulk ceria, with enthalpies for re-oxidation being approximately -500 kJ/mol O2, compared to -760 kJ/mol O2 for bulk ceria. However, WGS rates over 1 wt% Pd supported on ceria, Ce0.8Ti0.2O2, and Ce0.8Zr0.2O2 were nearly the same. For calcination at 1323 K, the mixed oxides separated into ceria and titania phases, as indicated by both the XRD and thermodynamic results.

36 MATERIALS SCIENCE↗

Magnetic behaviour studies on nanocrystalline cobalt ferrite by employing the Arrott plot

Vibrating Sample Magnetometer (VSM) has been used to analyze the magnetic behavior of ferrimagnetic material (CoFe{sub 2}O{sub 4}) synthesized by the citric acid modified sol-gel method. X-ray diffraction (XRD) pattern confirms the phase purity of the sample. Its magnetic measurement has been carried out at room temperature in the field range ±1.5T. The magnetocrystalline anisotropy and saturation magnetization of CoFe{sub 2}O{sub 4} are two important parameters which need to be studied for exploring its technological applications like memory device, magnetic sensors etc. Law of Approach (LA) to saturation and the Arrott plot analysis have been carried out to obtain the saturation magnetization. The difference in the saturation magnetization obtained from the two methods gives the qualitative understanding of magnetocrystalline anisotropy and lattice strain present in the sample. The present study explores a new way of analyzing magnetic hysteresis loop of nanocrystalline cobalt ferrite.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fluorescent of C-dot composite thin films and its properties

In the present work, we report the preparation of a fluorescent carbon nanodots (C-dots) epoxy composite thin films on a glass substrate. C-dots were prepared directly by a simple hydrothermal method using citric acid as a carbon source. The C-dots solutions were mixed with a transparent epoxy resin to form C-dot epoxy composite. Furthermore, the composite precursor was deposited on the glass substrate using a spin coating method in order to fabricate C-dot epoxy composite thin film. The transmittance intensity of C-dot composite film reached up to 90% in the visible light spectra. Using Swanopoel method, the film thickness of fabricated C-dot composite film was determined at about 1.45 μm, a value lies in a typical range needed for a wide range application. Thus, the C-dot composite film is promising in broadening applications in various fields such as energy conversion, optoelectronics, and display technology.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis and thermal change in IR reflectance of Al/W co-doped VO2 powder

Highlights: • Al/W-doped VO{sub 2} powders were synthesized by a hydrothermally method. • The Al/W-doped VO{sub 2} underwent a phase transition at around room temperature. • The Al/W-doped VO{sub 2} had the larger IR reflectance compared with W-VO{sub 2}(M). - Abstract: Al/W co-doped VO{sub 2} with a monoclinic structure, space group P2{sub 1}/c, was synthesized (hereafter, Al/W-doped VO{sub 2}(M1)) and its thermochromic property was investigated. First, to prepare the precursor for Al/W-doped VO{sub 2}(M1), V{sub 2}O{sub 5}, (NH{sub 4}){sub 10}W{sub 12}O{sub 41}·5H{sub 2}O, and AlCl{sub 3}·H{sub 2}O were dispersed in a citric acid solution and then hydrothermally treated in an autoclave. Then, the Al/W-doped VO{sub 2}(M1) powders were synthesized by heating the obtained precursor at various temperatures under an Ar gas flow. The Al/W-doped VO{sub 2}(M1) has a monoclinic structure with space group P2{sub 1}/c, similar to undoped VO{sub 2}(M1) and W-doped VO{sub 2}(M1). The Al/W-doped VO{sub 2}(M1) indicated that the monoclinic to tetragonal transition temperature was lowered to approximately room temperature by the Al and W doping. The Al/W-doped VO{sub 2}(M1) had the lower optical band gap and showed a larger IR reflectance in the 800–2000 nm range, compared with W-doped VO{sub 2}(M1) and pure VO{sub 2}(M1).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Construction of Eu2+ doped H3Sr6(PO4)5·2H2O with novel cruciate multilayer microarchitectures: facile hydrothermal synthesis, growth mechanism, and luminescence properties

Highlights: • H{sub 3}Sr{sub 6}(PO{sub 4}){sub 5}·2H{sub 2}O:Eu{sup 2+} phosphors were synthesized via a simple hydrothermal method. • H{sub 3}Sr{sub 6}(PO{sub 4}){sub 5}·2H{sub 2}O:Eu{sup 2+} showed novel cruciate multilayer microarchitectures. • Phase and morphology were depended on the optimization of the reaction conditions. • H{sub 3}Sr{sub 6}(PO{sub 4}){sub 5}·2H{sub 2}O:Eu{sup 2+} exhibited intense characteristic blue emission of Eu{sup 2+}. - Abstract: A series of monodisperse cruciate multilayer H{sub 3}Sr{sub 6}(PO{sub 4}){sub 5}·2H{sub 2}O:Eu{sup 2+} microarchitectures assembled by crossed nanorods have been successfully synthesized via a facile surfactant-assisted hydrothermal route. XRD and FT-IR confirmed the existence of crystalline water in the phosphor. The FE-SEM images revealed that the phase and morphology of resulting samples were strongly depended on the optimization of the reaction conditions, especially the pH value and the molar ratio of citric acid (CA)/Cations. Furthermore, the possible growth mechanism of H{sub 3}Sr{sub 6}(PO{sub 4}){sub 5}·2H{sub 2}O:Eu{sup 2+} microarchitectures was proposed in detail. Under near-ultraviolet excitation of 365 nm, the as-obtained H{sub 3}Sr{sub 6}(PO{sub 4}){sub 5}·2H{sub 2}O:0.05Eu{sup 2+} sample exhibited intense wide characteristic blue emission of Eu{sup 2+}, which could be decomposed by Gaussian fitting into two peaks corresponding to different Eu{sup 2+} luminous centers. The present results demonstrated that the morphology-tunable H{sub 3}Sr{sub 6}(PO{sub 4}){sub 5}·2H{sub 2}O:Eu{sup 2+} microarchitecture could be used as a potential candidate for future optoelectronic device applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enhanced Phytoextraction for Co-contaminated Soil with Cd and Pb by Ryegrass (Lolium perenne L.)

A pot experiment was conducted to investigate the effect of three additives – citric acid (CA), polyaspartic acid (PASP), and FeCl{sub 3} – on the phytoextraction efficiency of cadmium (Cd) and lead (Pb) by ryegrass (Lolium perenneL.) from artificially contaminated soils with different heavy metal concentrations. The results showed that as the concentration of pollutants increased, the TI (tolerance index) and BCF (bio-concentration factor) of ryegrass gradually increased only when FeCl{sub 3} was applied. FeCl{sub 3} also exhibited the most significant biomass enhancement and heavy metal accumulation of ryegrass, as well as the highest phytoextraction efficiency in heavily-polluted soils. The overall orders of the optimal phytoextraction efficiency for the three additives in terms of their MER (metal extraction ratio) were: FeCl{sub 3} > PASP > CA. Therefore, FeCl{sub 3} can be used to improve the Cd and Pb phytoextraction efficiency of ryegrass in heavily-polluted soils.

54 ENVIRONMENTAL SCIENCES↗

Ionic liquid assisted hydrothermal fabrication of hierarchically organized γ-AlOOH hollow sphere

Highlights: ► The γ-AlOOH hollow spheres were synthesized via an ionic liquid-assisted hydrothermal treatment. ► Ionic liquid plays an important role in the morphology of the product. ► Ionic liquid can be easily removed from the product and reused in next experiment. ► A “aggregation–solution–recrystallization” formation mechanism may occur in the system. -- Abstract: Hierarchically organized γ-AlOOH hollow spheres with nanoflake-like porous surface texture have been successfully synthesized via an ionic liquid-assisted hydrothermal synthesis method in citric acid monohydrate (CAMs). It was found that ionic liquid [bmim]{sup +}Cl{sup −} played an important role in the morphology of the product due to its strong interactions with reaction particles. The samples were characterized by X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscope (SEM) and Transmission Electron Microscopy (TEM). The results show that the product has narrow particle size distribution (500–900 nm particle diameter range), high specific surface area (240.5 m{sup 2}/g) and large pore volume (0.61 cm{sup 3}/g). The corresponding γ-Al{sub 2}O{sub 3} hollow spheres can be obtained by calcining it at 550 °C for 3 h. The proposed formation mechanism and other influencing factors of the γ-AlOOH hollow sphere material, such as reaction temperature, reaction duration, CAMs and urea, have also been investigated.

36 MATERIALS SCIENCE↗

Structural, ferroelectric and magnetic study of lead free (Na{sub 0.5}Bi{sub 0.5}){sub 1-x}La{sub x}Ti{sub 0.988}Fe{sub 0.012}O{sub 3} (x=0,0.01,0.03,0.05) ceramic

Lead free (Na{sub 0.5}Bi{sub 0.5}){sub 1-x}La{sub x}Ti{sub 0.988}Fe{sub 0.012}O{sub 3} ceramic having compositions (x=0, 0.01, 0.03, 0.05) has been prepared by sol gel method using citric acid. Structural analysis has been done by X-ray diffraction and FTIR measurements. XRD patterns have been confirmed perovskite structure for all samples. FTIR absorption band at around ∼630 cm{sup −1} is observed for all samples which confirm perovskite phase formation in samples. With increasing La concentration, shifting in XRD peaks and FTIR absorption bands is observed which suggests incorporation of La on A-site in prepared (Na{sub 0.5}Bi{sub 0.5}){sub 1-x}La{sub x}Ti{sub 0.988}Fe{sub 0.012}O{sub 3} samples. Effect of La substitution on Ferroelectric (Polarization vs. Electric field) and Magnetic (Magnetization vs. Magnetic field) properties have been studied at room temperature. All samples exhibit weak ferromagnetic order and also possess ferroelectric behavior which provides new insight to lead free single phase multiferroic materials.

36 MATERIALS SCIENCE↗

Effect of Annealing Temperature on Magnetic and Mössbauer Properties of ZnFe{sub 2}O{sub 4} Nanoparticles by Sol-gel Approach

In this study, spinel ZnFe{sub 2}O{sub 4} nanoparticles (NPs) were synthesized by citrate sol-gel route using nickel nitrates, ferric nitrates and citric acid by annealing at 900, 1000, and 1100{sup ∘}C. We reported the structural and magnetic properties (including Mössbauer analysis) for anisotropy ZnFe{sub 2}O{sub 4} NPs annealed at different temperatures. Fourier transform infrared (FT-IR) and X-ray powder diffraction (XRD) were utilized to analyze the structural properties of magnetic nanoparticles (MNPs). Morphological features of resultant MNPs were examined by scanning electron microscopy (SEM). The observed XRD results displayed that the crystallite size increased from 38.60 to 49.28 nm with increasing the annealing temperature in a distinct linear trend. The enhancement of saturation magnetization of the uniaxial ZnFe{sub 2}O{sub 4} NPs was studied and varied from 1.28 to 1.66 emu/g as the annealing temperature increases. The Mössbauer spectra results show that ZnFe{sub 2}O{sub 4} ferrites were paramagnetic in nature at room temperature (RT).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and Soft Magnetic Properties of Nickel-Substituted Co-Zn Nanoferrites

Nickel-substituted cobalt-zinc nanoferrites (Co{sub 0.5−x}Zn{sub 0.5}Ni{sub x}Fe{sub 2}O{sub 4}, x = 0.05 to 0.25 in steps of 0.05) were synthesized in a citric acid auto-combustion method. Divalent strong paramagnetic nickel ions substituted in place of ferromagnetic cobalt ions resulted in slight modifications over structural and significant changes in magnetic properties of the system. All samples were characterized with X-ray diffraction technique for structure determination. Crystallite sizes were calculated using the Williamson-Hall plot and size-strain plots, from these lattice strain and microstrain were discussed. Transmission electron microscopy measurements were done for the base sample (x = 0), and they showed well-developed spherical particles with an average size of 35 nm. SEM micrograph was recorded for the base sample to observe surface morphology, and it was observed to be stoichiometric, as evident from EDAX measurements. Saturation magnetization, remanence, coercivity and remanence ratio were measured using M-H loops recorded using a vibrating sample magnetometer at room temperature. Magnetocrystalline anisotropy was discussed with the help of magnetocrystalline anisotropy constant (K{sub 1}) obtained from the law of approach to saturation method.

36 MATERIALS SCIENCE↗

Economic Feasibility Analysis and Engineering System Design Development of Novel Cesium Adsorbents - 18680

Potassium copper hexacyanoferrate-cellulose hydrogel composites (HCF-gels) and potassium copper hexacyanoferrate-embedded poly-citric acid hydrogel film (HPC) were synthesized. In Cs{sup +} removal experiments, HCF-gels exhibited exceptional Cs{sup +} adsorption capacities 2.06-2.32 mmol g{sup -1}. HPC showed a very high Cs{sup +} uptake of 667 mg/g KCuHCF. The adsorbents revealed stable and high Cs{sup +} removal efficiency across a wide pH range. Notably, the adsorbents could adsorb Cs{sup +} selectively in seawater containing Cs{sup +}. The combination of testing and radiation stability results indicated that the performance of the materials are maintained whether irradiated or not. The cost of the HCF-gels and HPC were estimated approximately 13.0055 $/kg and 38.2490 $/kg respectively. This is reasonable cost compared to commercialized Cs{sup +} adsorbents. New pool scrubbing system is designed for engineering system design to apply novel Cs{sup +} adsorbents under severe accident condition. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Polyethylene glycol coated CoFe{sub 2}O{sub 4} nanoparticles: A potential spinel ferrite for biomedical applications

The structural and magnetic properties of the polyethylene glycol (PEG) coated cobalt spinel ferrite (CoFe{sub 2}O{sub 4}) nanoparticles have been reported in the present study. CoFe{sub 2}O{sub 4} nanoparticles were prepared by sol-gel auto-combustion method using citric acid + ethylene glycol as a fuel. The prepared powder of cobalt ferrite nanoparticles was annealed at 600°C for 6h and used for further study. The structural characterization of CoFe{sub 2}O{sub 4} nanoparticles were carried out by X-ray diffraction technique. The X-ray analysis confirmed the formation of single phase cubic spinel structure. The crystallite size, Lattice constant and X-ray density of the PEG coated CoFe{sub 2}O{sub 4} nanoparticles were calculated by using XRD data. The presence of PEG on CoFe{sub 2}O{sub 4} nanoparticles and reduced agglomeration in the CoFe{sub 2}O{sub 4} nanoparticles were revealed by SEM studies. The magnetic properties were studied by pulse field hysteresis loop tracer technique at a room temperature. The magnetic parameters such as saturation magnetization, remanence magnetization, coercivity etc have been obtained. These magnetic parameters were get decreased by PEG coating.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and characterisation of composite based biohydroxyapatite bovine bone mandible waste (BHAp) doped with 10 wt % amorphous SiO{sub 2} from rice husk by solid state reaction

Effect of 10 wt% amorphous SiO{sub 2} from rice husk addition on the microstructures of biohydroxyapatite (BHAp) obtained from bovine bone was synthesized by solid state reaction. In this study, biohydroxyapatite powder was obtained from bovine bone mandible waste heat treated at 800 °C for 5 h and amorphous SiO{sub 2} powder was extracted from citric acid leaching of rice husk followed by combustion at 700°C for 5 h. The composite powder then mixed and sintered at 1200 °C for 3 h. X-ray diffraction (XRD), Fourier transformed infrared (FTIR) spectroscopy and Scanning electron microscopy (SEM) techniques are utilized to characterize the phase relations, functional group present and morphology of the sample. The study has revealed that the processing procedures played an important role in microstructural development of BHAp-10 wt% SiO{sub 2} composite. The XRD study of the raw material revealed that the primary phase material in the heat treated of bovine bone mandible waste is hydroxyapatite and in the combustion of rice husk is amorphous SiO{sub 2}. However, in the composite the hydroxyapatite, β-tricalcium phosphate, and calcium phosphate silicate were observed. The FTIR result show that the hydroxyl stretching band in the composite decrease compared with those of hydroxyapatite spectra and the evolution of morphology was occurred in the composite.

36 MATERIALS SCIENCE↗

Preparation of fluorescent carbon dots and their interaction with human-transferrin (hTf)

Highlights: • Glycine–modified Carbon dots (G-CDs) with high fluorescent quantum yield (QY = 31%) were prepared by microwave-assisted method. • G-CDs were stability at biological system, and had low cytotoxicity. • Human transferrin (hTf) had one type of binding site with G-CDs, and the fluorescence quenching mode was static quenching process. - Abstract: Luminescent carbon dots (CDs) are new fluorescent materials and widely used in biomedical fields. In this paper, CDs were prepared using citric acid and glycine (denoted G-CDs) by one-step microwave-assisted method and characterized by transmission electron microscopy (TEM), power X-ray diffraction (XRD), nuclear magnetic resonance ({sup 13}CNMR), and Fourier transform infrared (FT-IR). The results showed that glycine was better than PEG200 or hexadecyltrimethyl ammonium bromide (CTAB) as the modification in reaction. The prepared G-CDs had the sizes about 10 nm, high fluorescent quantum yield (QY) up to 31%, and stability at biological system. Moreover, G-CDs had low cytotoxicity. Our results verified that amino group (or secondary amines) had a significant effect on the QY; one-step microwave-assisted method was simple, efficient and green. The further experiments about the interaction of G-CDs with human transferrin (hTf) were also detected. Data showed that there was a strong interaction between G-CDs and hTf, and one type of binding site between them. The quenching mode of fluorescence of hTf with G-CDs was static quenching process.

36 MATERIALS SCIENCE↗

Magnetic properties of Fe doped SmCrO{sub 3} perovskite

The compound SmCr{sub 1−x} Fe{sub x}O{sub 3} perovskites were prepared by citric acid route. the samples were characterized by XRD and SEM. The temperature and field dependent magnetization measurements were carried out in the temperature range of 5K −400 K at 0.01T field and −5T to 5T field at 2K. SmCrO3 compound has shown two magnetic transition temperatures at 197 K and 38 K. The observed behavior at 197 K is the characteristic of anti-ferromagnetic ordering of Cr{sup 3+} moments with weak ferromagnetism. The drop in magnetization below 38 K is due to the spin reorientation of Sm{sup 3+} in anti ferromagnetic arrangement and Cr{sup 3+}spins. the doping of Fe in SmCrO{sub 3} compound has shown a decrease in T{sub N1} and also the two magnetization reversals at 177K and 57K. The magnetic behavior at low temperatures is (T<T{sub N1}) explained in the context of competition among moments of rare earth (Sm) and transition metal ion(Cr/Fe). The existence of the two magnetization reversals offers the characteristic switching of magnetization without changing the direction of the applied magnetic field.

36 MATERIALS SCIENCE↗

Development and validation of a citrate synthase directed quantitative PCR marker for soil bacterial communities

Molecular innovations in microbial ecology are allowing scientists to correlate microbial community characteristics to a variety of ecosystem functions. However, to date the majority of soil microbial ecology studies target phylogenetic rRNA markers, while a smaller number target functional markers linked to soil processes. We validated a new primer set targeting citrate synthase (gtlA), a central enzyme in the citric acid cycle linked to aerobic respiration. Primers for a 225 bp fragment suitable for qPCR were tested for specificity and assay performance verified on multiple soils. Clone libraries of the PCR-amplified gtlA gene exhibited high diversity and recovered most major groups identified in a previous 16S rRNA gene study. Comparisons among bacterial communities based on gtlA sequencing using UniFrac revealed differences among the experimental soils studied. Conditions for gtlA qPCR were optimized and calibration curves were highly linear (R2 > 0.99) over six orders of magnitude (4.56 10^5 to 4.56 10^11 copies), with high amplification efficiencies (>1.7). We examined the performance of the gtlA qPCR across a variety of soils and ecosystems, spanning forests, old fields and agricultural areas. We were able to amplify gtlA genes in all tested soils, and detected differences in gtlA abundance within and among environments. These results indicate that a fully developed gtlA-targeted qPCR approach may have potential to link microbial community characteristics with changes in soil respiration.

54 ENVIRONMENTAL SCIENCES↗

Effects of Compounded Curing Agents on Properties and Performance of Urea Formaldehyde Resin

The effects of three compounded curing agents on the properties and performance of the urea-formaldehyde (UF) resin were investigated in this study. The compounded curing agents were prepared by mixing ammonium chloride with hexamethylenetetramine, citric acid, and oxalic acid respectively at a ratio of 1:1, named N-H, N–CA, and N–OA, respectively. The curing process, crystallinity, and physical properties were measured, and the three-ply plywood was fabricated to measure its prepress strength, wet shear strength, and formaldehyde emission. Results showed that the compounded curing agents N–CA and N–OA enhanced the initial viscosity, crosslinking density and thermal stability of UF resin. Additionally, the prepress strength of the plywood bonded by UF resin with N–CA and N–OA increased by 82 and 111% respectively compared to the UF resin with NH{sub 4}Cl, and the wet shear strength increased by 14 and 16%, the formaldehyde emission decreased by 19 and 42% respectively. However, owing to the short pot-life of these curing agent limited their storage time, the curing agents N–CA and N–OA should be applied to fabricate plywood in winter for obtaining a better bond strength and a lower formaldehyde emission. While the UF resin with N–HT showed a suitable pot-life, so it could be applied to fabricate plywood in summer for long time storage and avoiding procuring problem.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Investigation of structure and oxygen permeability of Ba-Ce-Co-Fe-O system

Mixed ionic-electronic conducting perovskite oxides, BaCe{sub 0.1}Co{sub x}Fe{sub 0.9-x}O{sub 3-{delta}}, were synthesized with a combined citric acid and EDTA complexing method. The structure and oxygen permeability of BaCe{sub 0.1}Co{sub x}Fe{sub 0.9-x}O{sub 3-{delta}} series was investigated by X-ray diffraction (XRD), scanning electron microscope (SEM) and oxygen permeation operation. XRD characterization showed that pure cubic perovskite structure can be obtained only if the content of cobalt and cerium in B-site of Ba-Ce-Co-Fe-O series is no more than 40% and 15%, respectively. Lattice parameters of BaCe{sub 0.1}Co{sub x}Fe{sub 0.9-x}O{sub 3-{delta}} gradually increase with cobalt and cerium content, iodine titration experiment revealed that the doping of cerium ions with big radius can keep B-site cobalt and iron ions in low valence state. Oxygen permeation operation showed that oxygen permeation flux of all BaCe{sub 0.1}Co{sub x}Fe{sub 0.9-x}O{sub 3-{delta}} membranes gradually increases with testing time in the initial stage, and the time to reach steady state becomes longer with the increase of cobalt content. After reaching permeation steady state, BaCe{sub 0.1}Co{sub 0.4}Fe{sub 0.5}O{sub 3-{delta}} exhibits highest oxygen flux amongst BaCe{sub 0.1}Co{sub x}Fe{sub 0.9-x}O{sub 3-{delta}} series.

36 MATERIALS SCIENCE↗