Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CIGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Photon and carrier management design for nonplanar thin-film copper indium gallium selenide photovoltaics

Nonplanar structured photovoltaic absorber design has potential to achieve high solar cell efficiency with significantly reduced material use. We report optoelectronic simulations that highlight photon and generated carrier management opportunities for improvement of thin film Cu(In x Ga 1-x )Se 2 (CIGS) device performance. Structures realized via either self-assembly or patterning via nanoimprint lithography, and also a combination of both are predicted to exhibit significant increases in short circuit current density and open circuit voltage simultaneously. The structures investigated include: 1) self-assembled nonplanar structures that strongly scatter incident light and enhance carrier generation near regions of high electric potential, 2) lithographicallypatterned embedded periodic dielectric structures, 3) planar dielectric layers that separate the CIGS absorber from the molybdenum back-contact via reduced-area contacts that minimize optical and electronic losses, 4) a combination of these for combined effects. We find that the self-assembled nonplanar CIGS cells with 700 nm planar equivalent thickness, combined with dielectric separation layers yield increases in short circuit current density and open circuit voltage up to 3.4 mA cm -2 and 29 mV, respectively. The absolute efficiency increases from 15.4% to 18.1%, compared to the predicted efficiency for planar CIGS thin film cells of equivalent thickness. The addition of a single layer MgF 2 anti-reflection coating brings the maximum predicted efficiency up to 19.7% for randomly textured devices.

14 SOLAR ENERGY↗

Intermixing and Formation of Cu-Rich Secondary Phases at Sputtered CdS/CuInGaSe 2 Heterojunctions

In this work, the Cu migration behavior in PVD-CdS/PVD-Cu(In,Ga)Se 2 (CIGS) heterojunctions is investigated by high-resolution electron microscopy (HREM) and energy dispersive X-ray spectroscopy (EDS). Incorporation of Cu into the CdS forms Cu-rich domains but has no effect on epitaxy of the CdS. Epitaxy is commonly observed in the CdS studied. Secondary ion mass spectroscopy depth profiles confirm the presence of Cu in the CdS. In some cases, Cd is completely replaced by Cu, resulting in a Cu-S binary compound epitaxially grown on the CIGS and fully coherent with the surrounding CdS. This is most likely to be cubic Cu 2 S, based on lattice spacing measurements from HREM images and EDS elemental quantification. In addition, we find that the buffer layer crystal structure influences the extent of Ga depletion at the CIGS surface, which is more pronounced adjacent to zinc-blende CdS than wurtzite CdS. Density functional theory calculations reveal that Cu clustering and different Ga depletion widths can be attributed to the inherent anisotropy of wurtzite CdS and differences in CIGS point-defect migration barriers. Understanding the influence of these effects on device properties is a critical step in developing more efficient CdS/CIGS-based photovoltaics.

14 SOLAR ENERGY↗

In-situ Microscopy Characterization of Cu(In,Ga)Se2 Potential-Induced Degradation

We report on the role of sodium in potentialinduced degradation (PID) of Cu(In, Ga)Se 2 (CIGS) solar cells. In-situ microscopy characterizations on AFM platform were performed on two stressed CIGS device under room temperature (RT) and high temperature (HT) at 85 degrees C. During PID stressing we observed depletion region gets wider as Na migrates, p-n junction becomes leaky at RT for over a month; and similar junction evolution was observed for HT-stressed sample, eventually the junction collapsed after 18 hours. The diode behaviors were confirmed by dark I-V measurement. Time-of Flight secondary-ion mass spectrometry reveals that the Na accumulates on ZnO and CdS side, as well as the upper layer of CIGS layer. The results indicate that Na drifted by the voltage applied on the soda-lime glass, then diffuse through the whole device. And the sodium profiles have different points of evolution due to the temperature differences between the two stressed samples. The consistent results unambiguously show how Na from substrate glass causes PID in CIGS solar cells.

14 SOLAR ENERGY↗

Improved solar cell performance and reliability through advanced defect characterization and growth studies

When this project began, CIGS and ACIGS solar cells were still well below the Shockley-Queisser efficiency limit for their bandgaps. Literature review from showed that JSC and FF were ~90% of the ideal values depending on the growth, but that VOC was only around 75% of the ideal value, which provided a clear objective to improve CIGS VOC. In polycrystalline CIGS, semiconductor defects (traps) have been shown by many studies to have detrimental impacts on device performance. Thus, the goal of this project was to investigate the sources and impacts of defects in CIGS, model their impact on device performance to predict efficiency improvements, and develop effective mitigation strategies to reduce the overall trap concentrations of these traps.

14 SOLAR ENERGY↗

Nanoscale Measurements of the Surface Photovoltage in Cu(In,Ga)Se2, Cu2ZnSn4, and Cu2ZnSnSe4 Thin Films: The Role of the Surface Electronics on the Efficiency of Solar Cells: Preprint

We report on recent advances in the development of nanoscale measurements of the surface photovoltage (SPV) based on scanning tunneling microscopy (STM) and its application to the kesterites Cu2ZnSnS4 (CZTS) and Cu2ZnSnSe4 (CZTSe). One critical aspect of the electronic structure of Cu(In,Ga)Se2 (CIGS) that has yet to be determined in their related kesterite compounds is the character of the surface electronics. In CIGS, spontaneous deviations in the stoichiometry of the surface cause a depletion (or even a type inversion) region that reinforces the CIGS homojunction. First-principle calculations predict that this inversion region will be more difficult to form in CZTS. In this contribution, the characteristics of the surface space charge region for both CIGS and CZTS(e) are investigated by STM. The implications of the results of these measurements on the future development of CZTS solar cells will be discussed.

14 SOLAR ENERGY↗

Morphological–Electrical Property Relation in Cu(In,Ga)(S,Se) 2 Solar Cells: Significance of Crystal Grain Growth and Band Grading by Potassium Treatment

Abstract Solution‐processed Cu(In,Ga)(S,Se) 2 (CIGS) has a great potential for the production of large‐area photovoltaic devices at low cost. However, CIGS solar cells processed from solution exhibit relatively lower performance compared to vacuum‐processed devices because of a lack of proper composition distribution, which is mainly instigated by the limited Se uptake during chalcogenization. In this work, a unique potassium treatment method is utilized to improve the selenium uptake judiciously, enhancing grain sizes and forming a wider bandgap minimum region. Careful engineering of the bandgap grading structure also results in an enlarged space charge region, which is favorable for electron–hole separation and efficient charge carrier collection. Besides, this device processing approach has led to a linearly increasing electron diffusion length and carrier lifetime with increasing the grain size of the CIGS film, which is a critical achievement for enhancing photocurrent yield. Overall, 15% of power conversion efficiency is achieved in solar cells processed from environmentally benign solutions. This approach offers critical insights for precise device design and processing rules for solution‐processed CIGS solar cells.

Kim, Joo‐Hyun↗

Cigarettes vs. e-cigarettes: Passive exposure at home measured by means of airborne marker and biomarkers

Background: There is scarce evidence about passive exposure to the vapour released or exhaled from electronic cigarettes (e-cigarettes) under real conditions. The aim of this study is to characterise passive exposure to nicotine from e-cigarettes' vapour and conventional cigarettes' smoke at home among non-smokers under real-use conditions. Methods: We conducted an observational study with 54 non-smoker volunteers from different homes: 25 living at home with conventional smokers, 5 living with nicotine e-cigarette users, and 24 from control homes (not using conventional cigarettes neither e-cigarettes). We measured airborne nicotine at home and biomarkers (cotinine in saliva and urine). We calculated geometric mean (GM) and geometric standard deviations (GSD). We also performed ANOVA and Student's t tests for the log-transformed data. We used Bonferroni-corrected t-tests to control the family error rate for multiple comparisons at 5%. Results: The GMs of airborne nicotine were 0.74 μg/m{sup 3} (GSD=4.05) in the smokers’ homes, 0.13 μg/m{sup 3} (GSD=2.4) in the e-cigarettes users’ homes, and 0.02 μg/m{sup 3} (GSD=3.51) in the control homes. The GMs of salivary cotinine were 0.38 ng/ml (GSD=2.34) in the smokers’ homes, 0.19 ng/ml (GSD=2.17) in the e-cigarettes users’ homes, and 0.07 ng/ml (GSD=1.79) in the control homes. Salivary cotinine concentrations of the non-smokers exposed to e-cigarette's vapour at home (all exposed ≥2 h/day) were statistically significant different that those found in non-smokers exposed to second-hand smoke ≥2 h/day and in non-smokers from control homes. Conclusions: The airborne markers were statistically higher in conventional cigarette homes than in e-cigarettes homes (5.7 times higher). However, concentrations of both biomarkers among non-smokers exposed to conventional cigarettes and e-cigarettes’ vapour were statistically similar (only 2 and 1.4 times higher, respectively). The levels of airborne nicotine and cotinine concentrations in the homes with e-cigarette users were higher than control homes (differences statistically significant). Our results show that non-smokers passively exposed to e-cigarettes absorb nicotine. - Highlights: • This is the first study of e-cigarette exposure at home under real-use conditions. • Airborne nicotine in homes with smokers were 5.7 times higher than in e-cig homes. • Cotinine of non-smokers exposed to e-cig and conventional cigarettes was similar. • Airborne nicotine in homes with e-cig users was higher than control homes. • Cotinine of non-smokers exposed to e-cig users was higher than in those no exposed.

54 ENVIRONMENTAL SCIENCES↗

E-cigarettes as a source of toxic and potentially carcinogenic metals

Background and aims: The popularity of electronic cigarette devices is growing worldwide. The health impact of e-cigarette use, however, remains unclear. E-cigarettes are marketed as a safer alternative to cigarettes. The aim of this research was the characterization and quantification of toxic metal concentrations in five, nationally popular brands of cig-a-like e-cigarettes. Methods: We analyzed the cartomizer liquid in 10 cartomizer refills for each of five brands by Inductively Coupled Plasma Mass Spectrometry (ICP-MS). Results: All of the tested metals (cadmium, chromium, lead, manganese and nickel) were found in the e-liquids analyzed. Across all analyzed brands, mean (SD) concentrations ranged from 4.89 (0.893) to 1970 (1540) μg/L for lead, 53.9 (6.95) to 2110 (5220) μg/L for chromium and 58.7 (22.4) to 22,600 (24,400) μg/L for nickel. Manganese concentrations ranged from 28.7 (9.79) to 6910.2 (12,200) μg/L. We found marked variability in nickel and chromium concentration within and between brands, which may come from heating elements. Conclusion: Additional research is needed to evaluate whether e-cigarettes represent a relevant exposure pathway for toxic metals in users. - Highlights: • Certain brands of cig-a-like e-cigarettes contain high levels of nickel and chromium. • Cig-a-likes contain low levels of cadmium, compared to tobacco cigarettes. • Nickel and chromium in the e-liquid of cig-a-likes may come from nichrome heating coils.

54 ENVIRONMENTAL SCIENCES↗

Optical properties of Cd{sub 1-x}Zn{sub x}S thin films for CuInGaSe{sub 2} solar cell application

The photovoltaic Cd{sub 1-x}Zn{sub x}S thin films, fabricated by chemical bath deposition, were successfully used as n-type buffer layer in CuInGaSe{sub 2} (CIGS) solar cells. Comprehensive optical properties of the Cd{sub 1-x}Zn{sub x}S thin films were measured and modeled by spectroscopic ellipsometry (SE), which is proven to be an excellent and non-destructive technique to determine optical properties of thin films. The optical band gap of Cd{sub 1-x}Zn{sub x}S thin films can be tuned from 2.43 eV to 3.25 eV by controlling the Zn content (x) and deposition conditions. The wider-band-gap Cd{sub 1-x}Zn{sub x}S film was found to be favorable to improve the quantum efficiency in the wavelength range of 450-550 nm, resulting in an increase of short-circuits current for solar cells. From the characterization of quantum efficiency (QE) and current-voltage curve (J-V) of CIGS cells, the Cd{sub 1-x}Zn{sub x}S films (x = 0.32, 0.45) were demonstrated to significantly enhance the photovoltaic performance of CIGS solar cell. The highest efficiency (10.5%) of CIGS solar cell was obtained using a dense and homogenous Cd{sub 0.68}Zn{sub 0.32}S thin film as the buffer layer.

36 MATERIALS SCIENCE↗

Investigation of Cu(In,Ga)Se{sub 2} polycrystalline growth: Ga diffusion and surface morphology evolution

Graphical abstract: - Highlights: • Ga diffusion in CIGS absorption layer after annealing treatment. • Phenomenon of surface reconstruction after annealing treatment. • Understand selenium effect on CIGS annealing process. • Explain the kinetic of Ga diffusion and MoSe{sub 2} formation. - Abstract: We report a study of selenization and annealing treatment of copper indium gallium selenide (CIGS) film. Morphologies and composition of surface and cross section were observed by scanning electron microscopy (SEM) equipped with Energy Dispersive Spectroscopy (EDS). X-ray diffraction (XRD) and Raman spectra were used to investigate film structure. Depth profiles of element distributions were detected by Auger electron spectroscopy (AES). A double-layer structure was formed in the film by selenizing metallic precursor at 450 °C. Further annealing at 600 °C in pure argon enhanced gallium diffusion from the bottom to the top of the film, while additional selenium in the annealing had a negative effect. A MoSe{sub 2} layer was detected between CIGS and Mo layers with annealing in additional Se. The annealing treatment also significantly modified the film surface morphology. A large amount of triangular and polygon shaped islands were observed by SEM. That might be due to different nucleation kinetics for different crystal facets.

36 MATERIALS SCIENCE↗

CuInGaSe{sub 2} nanoparticles by pulsed laser ablation in liquid medium

Highlights: • CIGS nanocolloids were synthesized using PLAL technique. • Characterized their morphology, structure, composition and optical properties. • Morphologies were dependent on ablation wavelength and liquid medium. • Optical absorption and bandgap of these nanocolloids were tunable. - Abstract: Pulsed laser ablation in liquid medium (PLALM) is a nanofabrication technique to produce complex nanostructures. CuInGaSe{sub 2} (CIGS) is an alloy with applications in photovoltaic industry. In this work, we studied the effects of laser ablation wavelength, energy fluence and liquid medium on the properties of the CIGS nanoparticles synthesized by PLALM. The nanoparticles obtained were analyzed by transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), selected area electron diffraction (SAED), X-ray photoelectron spectroscopy (XPS) and UV–vis absorption spectroscopy. XPS results confirmed the chemical states and composition of the ablated products. TEM analysis showed different morphologies for the nanomaterials obtained in different liquid media and ablation wavelengths. The optical properties for these CIGS nanocolloids were analyzed using UV–vis absorption spectroscopy. The results demonstrated the use of PLALM as a useful synthesis technique for nanoparticles of quaternary photovoltaic materials.

36 MATERIALS SCIENCE↗

Nanoscale Growth Kinetics of Cu(In,Ga)Se 2 Absorbers

Here, we investigate the kinetics of elemental segregation during the synthesis of Cu(In 1–x ,Ga x )Se 2 (CIGS) thin films via a rapid thermal growth process. Changes in elemental concentration are mapped rapidly via in situ X-ray fluorescence (XRF) microscopy. In situ XRF enables the quantification of Cu, In, Ga, and Se concentrations with 200 nm spatial resolution over a region of 7 μm × 7 μm, large enough to map multiple CIGS grains. Reacting elemental precursor stacks at 500, 550, and 600 °C, we find that copper is the driving force for α-CIGS phase formation at a rate of 17 nmol/cm 2 /min at 500 °C. Because of the thermal expansion of the substrate, cluster analysis and classification algorithms were employed to track compositionally similar regions over time and across samples measured at different temperatures. Beyond the direct application of these results for the optimization of CIGS manufacturing, these in situ experiments demonstrate the feasibility of quantitative compositional evaluation at the nanoscale during the synthesis of technologically relevant materials. In combination with advanced analysis methods, this example shows how correlative X-ray microscopy can contribute to the solution of the materials paradigm, relating synthesis to composition and properties at the nanoscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron-Selective TiO 2 Contact for Cu(In,Ga)Se 2 Solar Cells

The non-toxic and wide bandgap material TiO 2 is explored as an n-type buffer layer on p-type Cu(In,Ga)Se 2 (CIGS) absorber layer for thin film solar cells. The amorphous TiO 2 thin film deposited by atomic layer deposition process at low temperatures shows conformal coverage on the CIGS absorber layer. Solar cells from non-vacuum deposited CIGS absorbers with TiO 2 buffer layer result in a high short-circuit current density of 38.9 mA/cm 2 as compared to 36.9 mA/cm 2 measured in the reference cell with CdS buffer layer, without compromising open-circuit voltage. The significant photocurrent gain, mainly in the UV part of the spectrum, can be attributed to the low parasitic absorption loss in the ultrathin TiO 2 layer (~10 nm) with a larger bandgap of 3.4 eV compared to 2.4 eV of the traditionally used CdS. Overall the solar cell conversion efficiency was improved from 9.5% to 9.9% by substituting the CdS by TiO 2 on an active cell area of 10.5 mm2. In conclusion, optimized TiO 2 /CIGS solar cells show excellent long-term stability. The results imply that TiO 2 is a promising buffer layer material for CIGS solar cells, avoiding the toxic CdS buffer layer with added performance advantage.

14 SOLAR ENERGY↗

Individual identification of free hole and electron dynamics in CuIn{sub 1−x}Ga{sub x}Se{sub 2} thin films by simultaneous monitoring of two optical transitions

The photocarrier dynamics of CuIn{sub 1−x}Ga{sub x}Se{sub 2} (CIGS) thin films were studied using white-light transient absorption (TA) measurements, as an understanding of this behavior is essential for improving the performance of solar cells composed of CIGS thin films. A characteristic double-peak structure due to the splitting of the valence bands in the CIGS was observed in the TA spectra under near-band-gap resonant excitation. From a comparison of the TA decay dynamics monitored at these two peaks, it was found that the slow-decay components of the electron and hole relaxation are on the nanosecond timescale. This finding is clear evidence of the long lifetimes of free photocarriers in polycrystalline CIGS thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigating the electronic properties of Al{sub 2}O{sub 3}/Cu(In,Ga)Se{sub 2} interface

Atomic layer deposited (ALD) Al{sub 2}O{sub 3} films on Cu(In,Ga)Se{sub 2} (CIGS) surfaces have been demonstrated to exhibit excellent surface passivation properties, which is advantageous in reducing recombination losses at the rear metal contact of CIGS thin-film solar cells. Here, we report, for the first time, experimentally extracted electronic parameters, i.e. fixed charge density (Q{sub f}) and interface-trap charge density (D{sub it}), for as-deposited (AD) and post-deposition annealed (PDA) ALD Al{sub 2}O{sub 3} films on CIGS surfaces using capacitance–voltage (C-V) and conductance-frequency (G-f) measurements. These results indicate that the AD films exhibit positive fixed charges Q{sub f} (approximately 10{sup 12} cm{sup −2}), whereas the PDA films exhibit a very high density of negative fixed charges Q{sub f} (approximately 10{sup 13} cm{sup −2}). The extracted D{sub it} values, which reflect the extent of chemical passivation, were found to be in a similar range of order (approximately 10{sup 12} cm{sup −2} eV{sup −1}) for both AD and PDA samples. The high density of negative Q{sub f} in the bulk of the PDA Al{sub 2}O{sub 3} film exerts a strong Coulomb repulsive force on the underlying CIGS minority carriers (n{sub s}), preventing them to recombine at the CIGS/Al{sub 2}O{sub 3} interface. Using experimentally extracted Q{sub f} and D{sub it} values, SCAPS simulation results showed that the surface concentration of minority carriers (n{sub s}) in the PDA films was approximately eight-orders of magnitude lower than in the AD films. The electrical characterization and estimations presented in this letter construct a comprehensive picture of the interfacial physics involved at the Al{sub 2}O{sub 3}/CIGS interface.

36 MATERIALS SCIENCE↗

A comparative study on charge carrier recombination across the junction region of Cu{sub 2}ZnSn(S,Se){sub 4} and Cu(In,Ga)Se{sub 2} thin film solar cells

A comparative study with focusing on carrier recombination properties in Cu{sub 2}ZnSn(S,Se){sub 4} (CZTSSe) and the CuInGaSe{sub 2} (CIGS) solar cells has been carried out. For this purpose, electroluminescence (EL) and also bias-dependent time resolved photoluminescence (TRPL) using femtosecond (fs) laser source were performed. For the similar forward current density, the EL-intensity of the CZTSSe sample was obtained significantly lower than that of the CIGS sample. Primarily, it can be attributed to the existence of excess amount of non-radiative recombination center in the CZTSSe, and/or CZTSSe/CdS interface comparing to that of CIGS sample. In case of CIGS sample, TRPL decay time was found to increase with the application of forward-bias. This can be attributed to the reduced charge separation rate resulting from the reduced electric-field at the junction. However, in CZTSSe sample, TRPL decay time has been found almost independent under the forward and reverse-bias conditions. This phenomenon indicates that the charge recombination rate strongly dominates over the charge separation rate across the junction of the CZTSSe sample. Finally, temperature dependent V{sub OC} suggests that interface related recombination in the CZTSSe solar cell structure might be one of the major factors that affect EL-intensity and also, TRPL decay curves.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reaction Rate Enhancement for Cu(In,Ga)Se 2 Absorber Materials Using Ag-Alloying

The addition of Ag to Cu-Ga-In precursors for synthesizing (Ag,Cu)(In,Ga)Se 2 (ACIGS) thin films has shown benefits including improved adhesion, greater process tolerance, and potential for improved device performance. In this study, reaction pathways to form Cu(In,Ga)Se 2 (CIGS) and ACIGS were studied by time-progressive reactions at 450 °C in a 5% Ar/H 2 Se atmosphere followed by ex situ characterization. Results indicated that the addition of 25% Ag/(Ag+Cu) to the CIGS film reduces the reaction time by 50%. X-ray diffraction (XRD) analysis of CIGS films showed that the CuInSe 2 phase initially formed after 3.5 min. The slow reaction of the stable γ-Cu 9 (In,Ga) 4 phase, however, required more than 20 min to complete. Importantly, the addition of Ag to the CIGS film accelerated the reaction. Energy-dispersive X-ray spectroscopy shows that Ga/(Ga+In) grading occurs in the first 10 min of the reaction. XRD analysis showed that the chalcopyrite phase fully forms after 10 min and no significant changes were observed in samples selenized from 10-45 min. Reaction pathways of Ag-alloyed films were further characterized using in situ high temperature XRD analysis. The onset temperature of Se reaction was detected at 230 °C and a AgIn 2 phase transformation to (Ag,Cu)In 2 occurred during the early stage of the reaction.

36 MATERIALS SCIENCE↗

Understanding of Defect Physics in Polycrystalline Photovoltaic Materials: Preprint

The performance of thin-film solar cells is influenced by the quality of interfaces and formation of defects such as point defects, stacking faults, twins, dislocations, and grain boundaries. It is important to understand the defect physics so that appropriate methods may be developed to suppress the formation of harmful defects. Here, we review our understanding of defect physics in thin-filmphotovoltaic (PV) materials such as Si, CdTe, Cu(In,Ga)Se2 (CIGS), Cu2ZnSnSe2 (CZTSe), and Cu2ZnSnS2 (CZTS) using the combination of nanoscale electron microscopy characterization and density-functional theory (DFT). Although these thin-film PV materials share the same basic structural feature - diamond structure based - the defect physics in them could be very different. Some defects, such asstacking faults and special twins, have similar electronic properties in these thin-film materials. However, some other defects, such as grain boundaries and interfaces, have very different electronic properties in these materials. For example, grain boundaries produce harmful deep levels in Si and CdTe, but they do not produce significant deep levels in CIGS, CZTSe, and CZTS. These explain whypassivation is critical for Si and CdTe solar cells, but is less important in CIS and CZTS solar cells. We further provide understanding of the effects of interfaces on the performance of solar cells made of these PV materials.

14 SOLAR ENERGY↗