Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CEOS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Effect of oxidizer to fuel molar ratio on particle size and DC conductivity of CeO{sub 2} nanoparticles

Cerium oxide nanoparticles were synthesized by solution combustion method with varying the oxidizer (cerium nitrate hexa hydrate) to fuel (Glycine) molar ratio. The prepared samples were characterized by UV-visible spectrometer, X-ray diffractometer (XRD), Scanning electron microscope (SEM) and Energy dispersive X-Ray analysis (EDAX). XRD pattern reveals the formation of cubic fluorite structure of CeO{sub 2}. It was observed that finest crystallites were found at extreme fuel-deficient condition and it is good enough to produce favorable powder characteristics. The average crystallite size was found to be 14.46 nm to 21.57 nm. The temperature dependent dc conductivity was carried out using Keithley source meter between the temperature range from 300 K to 573 K. From this study it was found that the conductivity increases with increase of temperature due to semiconducting behavior of CeO{sub 2} and it decreases with particle size due to increase in the energy band gap.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural, morphological and optical properties of CeO{sub 2} thin films deposited by RF sputtering

Cerium oxide (CeO{sub 2}) thin films were deposited on glass substrates by sputtering at various substrate temperatures. CeO{sub 2} films were characterized by X-ray diffraction, FESEM, PL and Raman analyses. X-ray diffraction patterns of films reveal fcc cubic structure with preferential orientation along (2 2 0) crystallographic plane. SEM images show that the particles are uniformly distributed on the film surface. The films were found to be well adheared to the substrates and pin holes are not observed on the surface of the films. PL spectra exhibits a strong near band-gap-edge emission and a broad blue, green luminescence, which can be assigned to the presence of Ce and O vacancies, amorphous phases, deep level impurities and structural defects. The relative intensity between the different peaks of the bands related to defects or impurities was studied as a tool for quality control of the films. Moreover, vibrational measurements through Raman analysis were carried out and the results are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Yield strength of CeO 2 measured from static compression in a radial diamond anvil cell

Cerium oxide (ceria, CeO 2 ) is frequently used as a standard in applications such as synchrotron and x-ray free electron lasers for calibrating x-ray wavelengths and offers the potential for understanding the high pressure properties and deformation mechanisms in a wide range of similar face centered cubic (fcc) materials. In this study, the pressure dependence of the strength of ceria was investigated up to 38 GPa using angle dispersive x-ray diffraction in a radial geometry in a diamond anvil cell. In this experiment, the difference in the stress along the axis of compression and perpendicular to the direction of compression can be determined, giving a quantity known as the differential stress. It was found that the differential stress (t), a measure of the lower bound for yield strength, initially increases rapidly from 0.35 ± 0.06 GPa to 2.2 ± 0.4 GPa at pressures of 1.8 and 3.8 GPa, respectively. Above 4 GPa, t increases more slowly to 13.8 ± 2.6 GPa at a pressure of 38 GPa. The changes in the preferred orientation (texture) of CeO 2 with pressure were also measured, allowing for the determination of active deformation mechanisms using an elasto-viscoplastic self-consistent model (EVPSC). It was found that as pressure increased, the [001] direction had a slight preferred orientation along the axis of compression. Our EVPSC model of experimental fiber (cylindrically symmetric) textures and lattice strains were most consistent with dominant slip activity along ${111}$ $\langle$$1\bar10$$\rangle$.

36 MATERIALS SCIENCE↗

Development of Xe and Kr empirical potentials for CeO 2 , ThO 2 , UO 2 and PuO 2 , combining DFT with high temperature MD

In this study, the development of embedded atom method (EAM) many-body potentials for actinide oxides and associated mixed oxide (MOX) systems has motivated the development of a complementary parameter set for gas-actinide and gas-oxygen interactions. A comprehensive set of density functional theory (DFT) calculations were used to study Xe and Kr incorporation at a number of sites in CeO 2 , ThO 2 , UO 2 and PuO 2 . These structures were used to fit a potential, which was used to generate molecular dynamics (MD) configurations incorporating Xe and Kr at 300 K, 1500 K, 3000 K and 5000 K. Subsequent matching to the forces predicted by DFT for these MD configurations was used to refine the potential set. This fitting approach ensured weighted fitting to configurations that are thermodynamically significant over a broad temperature range, while avoiding computationally expensive DFT-MD calculations. The resultant gas potentials were validated against DFT trapping energies and are suitable for simulating combinations of Xe and Kr in solid solutions of CeO 2 , ThO 2 , UO 2 and PuO 2 , providing a powerful tool for the atomistic simulation of conventional nuclear reactor fuel UO 2 as well as advanced MOX fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Mechanical and electronic properties of CeO{sub 2}, ThO{sub 2}, and (Ce,Th)O{sub 2} alloys

A systematic first-principle study is conducted to calculate bulk modulus, elastic constants, phonon-dispersion curves, and electronic structures of CeO{sub 2}, ThO{sub 2}, and their ordered binary alloys Ce{sub x}Th{sub 8-x}O{sub 16} with x=1, 2, 4, 6, and 7 using local-density approximation (LDA), generalized gradient approximation (GGA), LDA+U, and GGA+U approaches. In order to get accurate results for these type of systems including f electrons [Ce(4f) and Th(5f)] we optimized the U parameter for use in LDA+U and GGA+U approaches. The computed structural, mechanical, and electronic properties of CeO{sub 2} and ThO{sub 2} are observed to display strong correlation with experimental data. In particular, the best agreement with experiment is obtained within the LDA+U in which on-site Coulomb interaction parameter (U{sub eff}) for Ce and Th are taken as 6.0 and 5.0 eV. To check the stability of alloy forms, phonon-dispersion curves of Ce{sub x}Th{sub 8-x}O{sub 16} with x=2, 4, and 6 are computed. In all concentrations, mechanical stability conditions are satisfied for alloys. Furthermore, we observed no negative phonon branches in the phonon spectrum of alloys. Our calculations indicated a strong effect of concentration, x, on the electronic structure of Ce{sub x}Th{sub 8-x}O{sub 16}.

36 MATERIALS SCIENCE↗

Water-promoted interfacial pathways in methane oxidation to methanol on a CeO 2 -Cu 2 O catalyst

Highly selective oxidation of methane to methanol has long been challenging in catalysis. Here, we reveal key steps for the pro­motion of this reaction by water when tuning the selectivity of a well-defined CeO 2 /Cu 2 O/Cu(111) catalyst from carbon monoxide and carbon dioxide to methanol under a reaction environment with methane, oxygen, and water. Ambient-pressure x-ray photoelectron spectroscopy showed that water added to methane and oxygen led to surface methoxy groups and accelerated methanol production. These results were consistent with density functional theory calculations and kinetic Monte Carlo simulations, which showed that water preferentially dissociates over the active cerium ions at the CeO 2 –Cu 2 O/Cu(111) interface. The adsorbed hydroxyl species blocked O-O bond cleavage that would dehydrogenate methoxy groups to carbon monoxide and carbon dioxide, and it directly converted this species to methanol, while oxygen reoxidized the reduced surface. Water adsorption also displaced the produced methanol into the gas phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

(U) Analysis of shock-initiated PBX-9501 through porous CeO 2

The attenuation properties of an impact initiated PBX-9501 explosive through several thicknesses of CeO 2 powder is investigated. The CeO 2 is at an initial porous density of 4.0 g/cm 3 , roughly 55 % of theoretical maximum density. Measurements of the input (into the powder) and propagated (through the powder) wave profiles are measured using optical velocimetry. Results show a reduction of the average wave speed, C X , and peak steady-state material velocity, uP , with increasing powder thickness from 1.5 - 5.0 mm.

36 MATERIALS SCIENCE↗

Unusual Phase Diagram of CeOs 4 Sb 12

Filled skutterudite compounds, with the formula MT 4 X 12 , where M is an alkali metal, alkaline-earth, lanthanide, or actinide, T is Fe, Ru, or Os, and X is P, As, or Sb, display a wide variety of interesting phenomena caused by strong electron correlations [1]. Among these, the three compounds CeOs 4 Sb 12 , PrOs 4 Sb 12 , and NdOs 4 Sb 12 , formed by employing Periodic Table neighbors for M, span the range from an antiferromagnetic (AFM) semimetal (M = Ce) via a 1.85 K unconventional (quadrupolar-fluctuation mediated) superconductor (M = Pr) to a 1 K ferromagnet (FM; M = Nd). In the course of an extended study of these compounds, we uncovered an unusual phase diagram for CeOs 4 Sb 12 .

36 MATERIALS SCIENCE↗

LDRD 227829: Multifunctional Composite LDRD: Radiation Effect on CeO 2 -HDPE Composites

Commercial high-density polyethylene (HDPE) is lightweight with excellent mechanical properties but has limited thermal stability. To enhance this, lanthanide-based nanomaterials like CeO 2 were mixed with HDPE. Using a twin-screw extruder improved dispersion. This study examines the effects of neutron, X-rays and gamma radiation on the crystallinity of polymer of CeO 2 -HDPE composites.

36 MATERIALS SCIENCE↗

Materials Data on CeO by Materials Project

CeO is Halite, Rock Salt structured and crystallizes in the cubic Fm-3m space group. The structure is three-dimensional. Ce is bonded to six equivalent O atoms to form a mixture of edge and corner-sharing CeO6 octahedra. The corner-sharing octahedral tilt angles are 0°. All Ce–O bond lengths are 2.49 Å. O is bonded to six equivalent Ce atoms to form a mixture of edge and corner-sharing OCe6 octahedra. The corner-sharing octahedral tilt angles are 0°.

36 MATERIALS SCIENCE↗

The Sluggish Diffusion of Cations in CeO 2 Probed through Molecular Dynamics and Metadynamics Simulations

Cation diffusion in fluorite‐structured CeO 2 , though far slower than anion diffusion, is an important, high‐temperature process because it governs diverse fabrication and degradation phenomena. Herein, cation diffusion is studied by means of classical molecular dynamics and metadynamics simulations. Three different mechanisms are examined: migration involving an isolated cerium vacancy, migration involving a cerium vacancy in a defect associate with an oxygen vacancy, and migration involving a cation divacancy. For each mechanism, defect diffusion coefficients are calculated as a function of temperature, from which the respective activation enthalpy of defect migration is obtained. Through comparisons with experimental cation diffusion data (specifically, of the absolute magnitude of the cation diffusivity as well as its activation enthalpy), it is concluded that cation diffusion takes place predominantly neither by isolated vacancies nor by cation vacancy–oxygen vacancy associates but by cation divacancies.

36 MATERIALS SCIENCE↗

Engineering of Grain Boundaries in CeO 2 Enabling Tailorable Resistive Switching Properties

Abstract Defect engineering in valence change memories aimed at tuning the concentration and transport of oxygen vacancies are studied extensively, however mostly focusing on contribution from individual extended defects such as single dislocations and grain boundaries. In this work, the impact of engineering large numbers of grain boundaries on resistive switching mechanisms and performances is investigated. Three different grain morphologies, that is, “random network,” “columnar scaffold,” and “island‐like,” are realized in CeO 2 thin films. The devices with the three grain morphologies demonstrate vastly different resistive switching behaviors. The best overall resistive switching performance is shown in the devices with “columnar scaffold” morphology, where the vertical grain boundaries extending through the film facilitate the generation of oxygen vacancies as well as their migration under external bias. The observation of both interfacial and filamentary switching modes only in the devices with a “columnar scaffold” morphology further confirms the contribution from grain boundaries. In contrast, the “random network” or “island‐like” structures result in excessive or insufficient oxygen vacancy concentration migration paths. The research provides design guidelines for grain boundary engineering of oxide‐based resistive switching materials to tune the resistive switching performances for memory and neuromorphic computing applications.

36 MATERIALS SCIENCE↗

Dry Reforming of Methane on a Highly‐Active Ni‐CeO 2 Catalyst: Effects of Metal‐Support Interactions on C−H Bond Breaking

Abstract Ni‐CeO 2 is a highly efficient, stable and non‐expensive catalyst for methane dry reforming at relative low temperatures (700 K). The active phase of the catalyst consists of small nanoparticles of nickel dispersed on partially reduced ceria. Experiments of ambient pressure XPS indicate that methane dissociates on Ni/CeO 2 at temperatures as low as 300 K, generating CH x and CO x species on the surface of the catalyst. Strong metal–support interactions activate Ni for the dissociation of methane. The results of density‐functional calculations show a drop in the effective barrier for methane activation from 0.9 eV on Ni(111) to only 0.15 eV on Ni/CeO 2− x (111). At 700 K, under methane dry reforming conditions, no signals for adsorbed CH x or C species are detected in the C 1s XPS region. The reforming of methane proceeds in a clean and efficient way.

Liu, Zongyuan↗

Dry reforming of methane on a highly-active Ni-CeO 2 catalyst: Effects of metal-support interactions on C–H bond breaking

Ni-CeO 2 is a highly efficient, stable and non-expensive catalyst for methane dry reforming at relative low temperatures (700 K). The active phase of the catalyst consists of small nanoparticles of nickel dispersed on partially reduced ceria. Experiments of ambient pressure XPS indicate that methane dissociates on Ni/CeO 2 at temperatures as low as 300 K, generating CH x and CO x species on the surface of the catalyst. Strong metal–support interactions activate Ni for the dissociation of methane. The results of density-functional calculations show a drop in the effective barrier for methane activation from 0.9 eV on Ni(111) to only 0.15 eV on Ni/CeO 2–x (111). At 700 K, under methane dry reforming conditions, no signals for adsorbed CH x or C species are detected in the C1s XPS region. As a result, the reforming of methane proceeds in a clean and efficient way.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Variations in the surface chemistry of methanol with CeO 2 (100) at low and elevated pressures

The reactions of methanol with and without O 2 were studied on a flat, highly crystalline CeO 2 (100) thin‐film surface with ambient pressure XPS. In the absence of O 2 , the ambient pressure XPS results indicate that in both low‐pressure (≤10 −5 Torr) and high‐pressure regimes (≥10 −1 Torr), the dominant surface species is methoxy. Methanol decomposition substantially reduces the ceria and C X deposit build‐up on the surface. When O 2 is present, C X does not accumulate on the surface and the dominant surface species is different in the low‐pressure and high‐pressure regimes. Methoxy dominates at low pressure, while formate dominates at the higher pressure. The type of surface species appears to be related to the ability of O 2 to fully oxidize the ceria surface during the methanol reaction.

Mullins, David R.↗

Microkinetic simulation and fitting of the temperature programmed reaction of methanol on CeO 2 (111): H 2 and H 2 O + V production

The kinetics and mechanism for temperature programmed reaction following adsorption of an adsorbate can be better understood by simulation and fitting with comparison to experiment. A case study is presented here for the chemistry of adsorption of methanol on a CeO 2 (111) surface followed by heating. The gas products observed are CH 3 OH, CH 2 O, H 2 , H 2 O, CO, CO 2 . At low temperatures (< 500 K), there is formation of H 2 and H 2 O, where the H 2 O formation is accompanied by lattice oxygen vacancy (V) formation and is thus important in determining the selectivity towards different products. Microkinetic modeling was performed using a recently published method for fitting to gain mechanistic knowledge of the H 2 and H 2 O + V formation at < 500 K. In the kinetic models used here, most of the H 2 and H 2 O + V V formation can be explained by a mechanism in which a metastable state of hydrogen on the surface (H*) acts as an intermediate. Two possibilities were investigated for the source of the metastable H* intermediate: H* from CH bond breaking of methoxies, or promotion of H+ to H* via electron transfer from ionic methoxies absorbed in oxygen vacancies (CH 3 O - /V). From this study, we consider the latter to be more likely at < 500 K. For the H 2 O formation, it was found to be critical that H 2 O cannot dissociate directly on oxygen vacancies. Finally, catalytic chemistry was observed in simulations, including catalytic formation of oxygen vacancies. Various features of the experimental results were reproduced, including methoxies being the major carbon containing species on the surface at < 500 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elevated Temperature Solid Particle Erosion Performance of Plasma-Sprayed Co-based Composite Coatings with Additions of Al{sub 2}O{sub 3} and CeO{sub 2}

In this paper, investigation into solid particle erosion behavior of atmospheric plasma-sprayed composite coating of CoCrAlY reinforced with Al{sub 2}O{sub 3} and CeO{sub 2} oxides on Superni 76 at elevated temperature of 600 °C is presented. Alumina particles are used as erodent at two impact angles of 30° and 90°. The microstructure, porosity, hardness, toughness and adhesion properties of the as-sprayed coatings are studied. The effects of temperature and phase transformation in the coatings during erosion process are analyzed using XRD and EDS techniques. Optical profilometer is used for accurate elucidation of erosion volume loss. CoCrAlY/CeO{sub 2} coating showed better erosion resistance with a volume loss of about 50% of what was observed in case of CoCrAlY/Al{sub 2}O{sub 3}/YSZ coating. Lower erosion loss is observed at 90° as compared to 30° impact angle. The erosion mechanism evaluated using SEM micrograph revealed that the coatings experienced ductile fracture exhibiting severe deformation with unusual oxide cracks. Reinforced metal oxides provide shielding effect for erodent impact, enabling better erosion resistance. The oxidation of the coating due to high-temperature exposure reforms erosion process into oxidation-modified erosion process.

36 MATERIALS SCIENCE↗

Sulfur poisoning of CeO[subscript 2]-Al[subscript 2]O[subscript 3]-supported mono- and bi-metallic Ni and Rh catalysts in steam reforming of liquid hydrocarbons at low and high temperatures

In order to develop a better understanding on sulfur poisoning of reforming catalysts in fuel processing for hydrogen production, steam reforming of liquid hydrocarbons was performed over CeO{sub 2}-Al{sub 2}O{sub 3} supported monometallic Ni and Rh and bimetallic Rh-Ni catalysts at 550 and 800 C. XANES was used to identify the sulfur species in the used catalysts and to study their impacts on the metal surface properties probed by XPS. It was found that both monometallic catalysts rapidly deactivated at 550 C, and showed poor sulfur tolerance. Although ineffective for the Ni catalyst, increasing the temperature to 800 C dramatically improved the sulfur tolerance of the Rh catalyst. XANES revealed that metal sulfide and organic sulfide are the dominant sulfur species on the used Ni catalyst, while sulfonate and sulfate predominate on the used Rh catalyst. The presence of sulfur induced severe carbon deposition on the Ni catalyst at 800 C. The superior sulfur tolerance of the Rh catalyst at 800 C may be associated with its capability in sulfur oxidation. It is likely that the formation of the oxygen-shielded sulfur structure of sulfonate and sulfate can suppress the poisoning impact of sulfur on Rh by inhibiting direct rhodium-sulfur interaction. Moreover, XPS indicated that the metal surface properties of the Rh catalysts after the reaction without and with sulfur at 800 C are similar, suggesting that sulfur poisoning on Rh was mitigated under the high-temperature condition. Although the Rh-Ni catalyst exhibited better sulfur tolerance than the monometallic catalysts at 550 C, its catalytic performance was inferior compared with the Rh catalyst in the sulfur-containing reaction at 800 C probably due to the severe carbon deposition on the bimetallic catalyst.

08 HYDROGEN↗