Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CATHODES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Identifying a descriptor for d-orbital delocalization in cathodes of Li batteries based on x-ray Compton scattering

We discuss how x-ray Compton scattering spectra can be used for investigating the evolution of electronic states in cathode materials of Li batteries under the lithiation/delithiation process. In particular, our analysis of the Compton spectra taken from polycrystalline Li{sub x}CoO{sub 2} samples shows that the spectra are dominated by the contribution of the O-2p redox orbital. We identify a distinct signature of d-orbital delocalization, which is tied directly to the conductivity of the material, providing a descriptor based on Compton spectra for monitoring the lithiation range with improved conductivity and kinetics for electrochemical operation. Our study demonstrates that Compton scattering spectroscopy can provide a window for probing complex electronic mechanisms underlying the charging and discharging processes in Li-battery materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In–Depth Analysis of the Degradation Mechanisms of High–Nickel, Low/No–Cobalt Layered Oxide Cathodes for Lithium–Ion Batteries

A rational compositional design of high-nickel, cobalt-free layered oxide materials for high-energy and low-cost lithium-ion batteries would be expected to further propel the widespread adoption of electric vehicles (EVs), yet a composition with satisfactory electrochemical properties has yet to emerge. The previous work has demonstrated a promising LiNi 0.883 Mn 0.056 Al 0.061 O 2 (NMA-89) composition that outperformed high-nickel, cobalt-containing analogs in cycling stability and maintained a comparable rate performance and thermal stability. Herein, the capacity fading mechanism of NMA-89 in a pouch full cell with a 4.2 V cutoff is compared to that of its cobalt-containing analogs. The results reveal that particle cracking in LiNi 0.89 Mn 0.055 Co 0.055 O 2 (NMC-89) and LiNi 0.883 Co 0.053 Al 0.064 O 2 (NCA-89) leads to a loss of active material and an increase in surface area, thereby exacerbating structural and surface instabilities, accelerating impedance and polarization growth, and ultimately reducing their capacity retentions. LiNi 0.89 Mn 0.044 Co 0.042 Al 0.013 Mg 0.011 O 2 (NMCAM-89) and NMA-89 experience subdued surface reactions and maintain spherical particle structures, both of which are conducive to their capacity retentions during long-term cycling. Furthermore, this investigation offers insights into how specific transition-metal ions dictate the electrochemical stability of high-Ni layered oxide cathode materials, highlights the benefit of Mn-Al combination in NMA-89, and presents potential strategies to further enhance the performance of this novel class of cathode materials.

degradation mechanisms↗

High-Voltage Performance of Ni-Rich NCA Cathodes: Linking Operating Voltage with Cathode Degradation

High-voltage Ni-rich cathodes have been studied as a possible way to achieve high energy density in Li-ion batteries. However, capacity fade due to structural changes at high voltages has limited their applications. In this study, we identify 4.5 V (vs. graphite) as the optimum upper cutoff voltage (UCV) for a Ni-rich NCA cathode [LiNi 0.8 Co 0.15 Al 0.05 O 2 ]. At this UCV, NCA delivers a 12 % increase in reversible capacity (when discharged to 2.5 V) and retains 92 % of its initial capacity after 100 cycles at 1C/-1C cycling when compared to 4.2 V as UCV. By increasing UCV to 4.7 V, the discharge capacity can be raised to >200 mAh/g. However, the rate of capacity fade is greater when compared to 4.5 V as UCV. This increased rate of capacity fade, at higher UCV, is related to irreversible lattice contractions that leads to structural rearrangement at charged states during high-voltage cycling. Lastly, our results show a change in transition metal oxidation states and an onset of structural ordering occurs when the UCV is 4.7 V.

36 MATERIALS SCIENCE↗

Design of Graded Cathode Catalyst Layers with Various Ionomers for Fuel Cell Application

Proton exchange membrane fuel cells (PEMFCs) powered by green hydrogen (H2) have become a promising alternative to conventional hydrocarbon-fueled power generators. Despite technological advancements, further improvements in efficiency, durability, and low-cost production are required for the widespread adoption of PEMFCs. Though numerous approaches to improve PEMFC electrodes have been reported, most strategies utilize a single material set (e.g., one combination of catalyst and ionomer) to improve performance. Alternatively, anisotropic (graded) electrode structures with locally tunable properties may yield superior electrode performance due to improved ionic and gas phase transport. In this work, graded cathode catalyst layers (CCLs) incorporating different ionomers (Nafion D2020, Aquivion D79-25BS, and HOPI) were designed and prepared. Performance screening shows that some of these graded electrode structures have comparable performance to optimized single-ionomer electrode structures (D2020) suggesting some synergistic benefit. Additionally, we show that electrodes with lower equivalent weight (EW) D79 ionomer near the membrane and D2020 ionomer near the gas diffusion media outperformed electrodes with the inverted configuration. Finally, EIS analysis shows some graded ionomer structures (e.g. D79/D2020) have better than expected H+ conductivity, generally leading to better electrode performance. However, further optimization of ionomer content and catalyst ink formulations is needed to improve overall PEMFC performance.

DIRECT ENERGY CONVERSION↗

One-step hydrothermal synthesis and electrochemical performance of sodium-manganese-iron phosphate as cathode material for Li-ion batteries

The sodium-manganese-iron phosphate Na{sub 2}Mn{sub 1.5}Fe{sub 1.5}(PO{sub 4}){sub 3} (NMFP) with alluaudite structure was obtained by a one-step hydrothermal synthesis route. The physical properties and structure of this material were obtained through XRD and Mössbauer analyses. X-ray diffraction Rietveld refinements confirm a cationic distribution of Na{sup +} and presence of vacancies in A(2)’, Na{sup +} and small amounts of Mn{sup 2+} in A(1), Mn{sup 2+} in M(1), 0.5 Mn{sup 2+} and Fe cations (Mn{sup 2+},Fe{sup 2+} and Fe{sup 3+}) in M(2), leading to the structural formula Na{sub 2}Mn(Mn{sub 0.5}Fe{sub 1.5})(PO{sub 4}){sub 3}. The particles morphology was investigated by SEM. Several reactions with different hydrothermal reaction times were attempted to design a suitable synthesis protocol of NMFP compound. The time of reaction was varied from 6 to 48 h at 220 °C. The pure phase of NMFP particles was firstly obtained when the hydrothermal reaction of NMFP precursors mixture was maintained at 220 °C for 6 h. When the reaction time was increased from 6 to 12, 24 and 48 h, the dandelion structure was destroyed in favor of NMFP micro-rods. The combination of NMFP (NMFP-6H, NMFP-12H, NMFP-24H and NMFP-48H) structure refinement and Mössbauer characterizations shows that the increase of the reaction time leads to the progressive increment of Fe(III) and the decrease of the crystal size. The electrochemical tests indicated that NMFP is a 3 V sodium intercalating cathode. The comparison of the discharge capacity evolution of studied NMFP electrode materials at C/5 current density shows different capacities of 48, 40, 34 and 34 mA h g{sup −1} for NMFP-6H, NMFP-12H, NMFP-24H and NMFP-48H respectively. Interestingly, all samples show excellent capacity retention of about 99% during 50 cycles. - Graphical abstract: SEM micrographs (left) and evolution of the discharge on cycling with increasing rates from C/15 to 4 C (right) of NMFP material prepared by hydrothermal synthesis at 220 °C at indicated time. Display Omitted - Highlights: • One-step hydrothermal method was used to prepare sodium manganese iron phosphate NMFP. • 3D-NMFP dandelion sphere-like particles were obtained at 220 °C after 6 h. • Increasing reaction time leads to the enhancement of the crystallinity and crystal stabilility of NMFP. • The growth of the particle size and change of morphology are correlated to the reaction time. • EC performance of NMFP powders were greatly affected by the synthesis conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two-dimensional modeling of the cathode sheath formation during the streamer-cathode interaction

In this paper, a computational simulation of the sheath formation during the streamer-surface interaction at atmospheric pressure is presented. A two-dimensional fluid model of a point-to-plane configuration is applied to investigate the evolution of the discharge in the vicinity of cathode plane. The effects of the surfaces on the properties of streamer have been studied for three cases, i.e., conductive surface with secondary electron emission (SEE), conductive surface without SEE, and dielectric surface. In all cases, we found that the axial propagation velocity of the streamer front decreases as the streamer arrives at the boundary of the cathode sheath. And the simulation results showed that the properties of the surface have a significant effect on the streamer. Besides the influences, the secondary emission coefficient and the relative permittivity on the streamer-surface interactions are also studied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Surface degradation of Li{sub 1–x}Ni{sub 0.80}Co{sub 0.15}Al{sub 0.05}O{sub 2} cathodes: Correlating charge transfer impedance with surface phase transformations

The pronounced capacity fade in Ni-rich layered oxide lithium ion battery cathodes observed when cycling above 4.1 V (versus Li/Li{sup +}) is associated with a rise in impedance, which is thought to be due to either bulk structural fatigue or surface reactions with the electrolyte (or combination of both). Here, we examine the surface reactions at electrochemically stressed Li{sub 1–x}Ni{sub 0.8}Co{sub 0.15}Al{sub 0.05}O{sub 2} binder-free powder electrodes with a combination of electrochemical impedance spectroscopy, spatially resolving electron microscopy, and spatially averaging X-ray spectroscopy techniques. We circumvent issues associated with cycling by holding our electrodes at high states of charge (4.1 V, 4.5 V, and 4.75 V) for extended periods and correlate charge-transfer impedance rises observed at high voltages with surface modifications retained in the discharged state (2.7 V). The surface modifications involve significant cation migration (and disorder) along with Ni and Co reduction, and can occur even in the absence of significant Li{sub 2}CO{sub 3} and LiF. These data provide evidence that surface oxygen loss at the highest levels of Li{sup +} extraction is driving the rise in impedance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and Electrochemical Investigation of Li(Ni0.4Co0.2-yAlyMn0.4)O2 Cathode Material

Li(Ni{sub 0.4}Co{sub 0.2-y}Al{sub y}Mn{sub 0.4})O{sub 2} with y=0.05 was investigated to understand the effect of replacement of the cobalt by aluminum on the structural and electrochemical properties. The effect of the substitution was studied by in-situ X-ray absorption spectroscopy (XAS), utilizing a novel in situ electrochemical cell, specifically designed for long-term X-ray experiments. The cell was cycled at a moderate rate through a typical Li-ion battery operating voltage range (1.0-4.7 V). XAS measurements were performed at different states-of-charge (SOC) during cycling, at the Ni, Co, and the Mn edges, revealing details about the response of the cathode to Li insertion and extraction processes. The extended X-ray absorption fine structure region of the spectra revealed the changes of bond distance and coordination number of Ni, Co, and Mn absorbers as a function of the SOC of the material. The oxidation states of the transition metals in the system are Ni{sup 2+}, Co{sup 3+}, and Mn{sup 4+} in the as-made material (fully discharged), while during charging the Ni{sup 2+} is oxidized to Ni{sup 4+} through an intermediate stage of Ni{sup 3+}, Co{sup 3+} is oxidized towards Co{sup 4+} and Mn was found to be electrochemically inactive and remains as Mn{sup 4+}. The EXAFS results during cycling show that the Ni-O changes the most, followed by Co-O and Mn-O varies the least. These measurements on this cathode material confirmed that the material retains its symmetry and good structural short-range order leading to the superior cycling reported earlier.

25 ENERGY STORAGE↗

Activity and Stability of (Pr 1-x Nd x ) 2 NiO 4 as Cathodes for Solid Oxide Fuel Cells: Part V. In Situ Studies of Phase Evolution

This study is to complement an early report (the manuscript is attached for review purpose) on the role of interlayer on activity and performance stability in praseodymium nickelates. The aforementioned report showed a remarkable 48% increase in power density while switching from common GDC interlayer to a new interlayer chemistry (PGCO). Furthermore, a stable long-term performance was linked with suppressed reaction between the cathode and PGCO interlayer. In this article, we report in situ studies of the phase evolution. The high energy XRD studies at a synchrotron source showed fully suppressed phase transition in praseodymium nickelates with PGCO interlayer, while the electrodes on the GDC interlayer undergo substantial phase transformation. Furthermore, in operando and post-test XRD analyses shown fully suppressed structural changes in electrodes operated in full cells at 750°C and 0.80 V for 500 hours. SEM-EDS analysis showed that the formation of PrO x at the cathode-interlayer interface may play a role in a decrease of mechanical integrity of the interfaces, due to thermal expansion mismatch, leading to a local stress between the two phases. Furthermore, phase evolution at a narrow interface may propagate toward the electrode bulk, leading to structural changes Q1 and performance degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Open‐Structured V 2 O 5 · n H 2 O Nanoflakes as Highly Reversible Cathode Material for Monovalent and Multivalent Intercalation Batteries

The high‐capacity cathode material V 2 O 5 · n H 2 O has attracted considerable attention for metal ion batteries due to the multielectron redox reaction during electrochemical processes. It has an expanded layer structure, which can host large ions or multivalent ions. However, structural instability and poor electronic and ionic conductivities greatly handicap its application. Here, in cell tests, self‐assembly V 2 O 5 · n H 2 O nanoflakes shows excellent electrochemical performance with either monovalent or multivalent cation intercalation. They are directly grown on a 3D conductive stainless steel mesh substrate via a simple and green hydrothermal method. Well‐layered nanoflakes are obtained after heat treatment at 300 °C (V 2 O 5 ·0.3H 2 O). Nanoflakes with ultrathin flower petals deliver a stable capacity of 250 mA h g −1 in a Li‐ion cell, 110 mA h g −1 in a Na‐ion cell, and 80 mA h g −1 in an Al‐ion cell in their respective potential ranges (2.0–4.0 V for Li and Na‐ion batteries and 0.1–2.5 V for Al‐ion battery) after 100 cycles.

Wang, Huali↗