Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “C++ analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Propagation of viral genomes by replicating ammonia-oxidising archaea during soil nitrification

Ammonia-oxidising archaea (AOA) are a ubiquitous component of microbial communities and dominate the first stage of nitrification in some soils. While we are beginning to understand soil virus dynamics, we have no knowledge of the composition or activity of those infecting nitrifiers or their potential to influence processes. This study aimed to characterise viruses having infected autotrophic AOA in two nitrifying soils of contrasting pH by following transfer of assimilated CO 2 -derived 13 C from host to virus via DNA stable-isotope probing and metagenomic analysis. Incorporation of 13 C into low GC mol% AOA and virus genomes increased DNA buoyant density in CsCl gradients but resulted in co-migration with dominant non-enriched high GC mol% genomes, reducing sequencing depth and contig assembly. We therefore developed a hybrid approach where AOA and virus genomes were assembled from low buoyant density DNA with subsequent mapping of 13 C isotopically enriched high buoyant density DNA reads to identify activity of AOA. Metagenome-assembled genomes were different between the two soils and represented a broad diversity of active populations. Sixty-four AOA-infecting viral operational taxonomic units (vOTUs) were identified with no clear relatedness to previously characterised prokaryote viruses. These vOTUs were also distinct between soils, with 42% enriched in 13 C derived from hosts. The majority were predicted as capable of lysogeny and auxiliary metabolic genes included an AOA-specific multicopper oxidase suggesting infection may augment copper uptake essential for central metabolic functioning. These findings indicate virus infection of AOA may be a frequent process during nitrification with potential to influence host physiology and activity.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Search for rare 3-$α$ decays in the region of the Hoyle state of 12 C

We performed a refined analysis of the data collected with the CHIMERA detector with the aim of searching rare 3-$α$ decay modes near the Hoyle state of 12 C. In particular we investigated the direct and sequential decay modes of the Hoyle state including also the recently suggested Efimov state. The comparison of selected events with simulations constrains the precision achievable with measurements in different experimental conditions. We observe good sensitivities to different decay scenarios also in the CHIMERA spherical region notwithstanding its limited angular resolution. Furthermore, the search for the decay of the Efimov state in 12 C was performed by using new selection strategies as suggested by simulations. The obtained results are not conclusive, however, we are able to exclude the presence of a sequential decay of this state, while our data could be compatible with its direct decay.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Novel High Resolution High Temperature In-Line Sensors for Steel Manufacturing

To support efficiency, productivity, yield improvements, and future industry 4.0 and SMART manufacturing objectives for a competitive and prosperous steel industry, this program has embarked on an effort to develop, demonstrate and deploy several novel sensing technologies based on fiber optics for use in production steel facilities. Over the duration of this program, our team has successfully demonstrated three of these technologies: (1) near continuous Rayliegh Scattering optical frequency domain reflectometry (OFDR) sensing with single mode silica fibers for temperature sensing to 700 C, (2) semi-distributed fiber Bragg grating (FBG) sensing with multimode sapphire fibers for temperature sensing to >1600 C, and (3) remote in-situ Raman analysis for slag and flux chemistry analysis at steelmaking temperatures >1550 C. Each of these sensor and interrogation systems was developed, refined, and tested in our labs at Missouri S&T and then successfully deployed at SSAB’s production facilities at two sites, one in Montpelier, IA and one in Mobile, AL.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Resolving Conflicting Physical and Biochemical Feedbacks to Climate in Response to Long-Term Warming

The goal of the research was to increase our understanding of the microbial mechanisms that control soil organic matter decay in the context of a changing climate. We hypothesized that a major source of carbon respired after long-term soil warming is recalcitrant soil C mineralized by microbes. We found that long-term warming was associated with decreased fungal communities but not bacterial communities, with bacterial communities in organic horizon soils significantly affected by warming. Molecular analysis indicated that this community shift was towards a more oligotrophic community, consistent with previously observed decreased in soil organic matter quality and quantity. We further hypothesized that low labile C resulting from long-term warming has selected for a microbial community that is better able to mineralize recalcitrant C. Analysis of soil communities and individual isolates physiology showed that long-term warming caused bacteria to have increased potential lignolytic activitiy as well as increased carbohydrate degradation potential. This increased ability to degrade recalcitrant soil organic matter is suggested as a mechanism for accelerated soil carbon loss with long-term warming. Soil warming was shown to have little change in transcriptional activity or proteins levels of the enzymes related to recalcitrant C, and little change in the temperature sensitivity of enzyme activity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

A U.S.-China coal power transition and the global 1.5 °C pathway

As the world seeks to increase ambition rapidly to limit global warming to 1.5 °C, joint leadership from the world's largest greenhouse gas (GHG) emitters—the United States (U.S.) and China—will be critical to deliver significant emissions reductions from their own countries as well as to catalyze increased international action. After a period of uncertainty in international climate policy, these countries now both have current leadership that supports ambitious climate action. In this context, a feasible, high-impact, and potentially globally catalytic agreement by the U.S. and China to transition away from coal to clean energy would be a major contribution toward this global effort. We undertake a plant-by-plant assessment in the power sector to identify practical coal retirement pathways for each country that are in line with national priorities and the global 1.5 °C target. Our plant-by-plant analysis shows that the 1.5 °C-compatible pathways may result in an average retirement age of 47 years for the U.S. coal plants and 22 years for Chinese coal plants, raising important questions of how to compare broader economic, employment, and social impacts. We also demonstrate that such pathways would also lead to significant emissions reductions, lowering overall global energy-related CO 2 emissions by about 9% in 2030 relative to 2020. A catalytic effect from the possibility of other countries taking compatible actions is estimated to reduce global emissions by 5.1 Gt CO 2 in 2030 and by 10.1 Gt CO 2 in 2045.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A Quantum Mechanical MP2 Study of the Electronic Effect of Nonplanarity on the Carbon Pyramidalization of Fullerene C 60

Among C 60 ’s diverse functionalities, its potential application in CO 2 sequestration has gained increasing interest. However, the processes involved are sensitive to the molecule’s electronic structure, aspects of which remain debated and require greater precision. To address this, we performed structural optimization of fullerene C 60 using the QM MP2/6–31G* method. The nonplanarity of the optimized icosahedron is characterized by two types of dihedral angles: 138° and 143°. The 120 dihedrals of 138° occur between two hexagons intersecting at C–C bonds of 1.42 Å, while the 60 dihedrals of 143° are observed between hexagons and pentagons at C–C bonds of 1.47 Å. NBO analysis reveals less pyramidal sp 1.78 hybridization for carbons at the 1.42 Å bonds and more pyramidal sp 2.13 hybridization for the 1.47 Å bonds. Electrostatic potential charges range from -0.04 a.u. to 0.04 a.u. on the carbon atoms. Second-order perturbation analysis indicates that delocalization interactions in the C–C bonds of 1.42 Å (143.70 kcal/mol) and 1.47 Å (34.98 kcal/mol) are 22% and 38% higher, respectively, than those in benzene. MP2/Def2SVP calculations yield a correlation energy of 13.49 kcal/mol per electron for C 60 , slightly higher than the 11.68 kcal/mol for benzene. However, the results from HOMO-LUMO calculations should be interpreted with caution. This study may assist in the rational design of fullerene C 60 derivatives for CO 2 reduction systems.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Temperature transformation of blended magnesium potassium phosphate cement binders

In this study, a multi-technique approach was utilised to determine the high temperature performance of magnesium potassium phosphate cement (MKPC) blended with fly ash (FA) or ground granulated blast furnace slag (GBFS) with respect to nuclear waste immobilisation applications. Conceptual fire conditions were employed (up to 1200 °C, 30 min) to simulate scenarios that could occur during interim storage, transportation or within a final geological disposal facility. After exposure up to 400 °C, the main crystalline phase, struvite-K (MgKPO{sub 4}·6H{sub 2}O), was dehydrated to poorly crystalline MgKPO{sub 4} (with corresponding volumetric and mass changes), with MgKPO{sub 4} recrystallisation achieved by 800 °C. XRD and SEM/EDX analysis revealed reaction occurred between the MgKPO{sub 4} and FA/GBFS components after exposure to 1000–1200 °C, with the formation of potassium aluminosilicate phases, leucite and kalsilite (KAlSi{sub 2}O{sub 6} and KAlSiO{sub 4}), commensurate with a reduced relative intensity (or complete elimination) of the dehydrated struvite-K phase, MgKPO{sub 4.} This was further supported by solid-state NMR ({sup 27}Al and {sup 29}Si MAS), where only residual features associated with the raw FA/GBFS components were observable at 1200 °C. The high temperature phase transformation of blended MKPC binders resulted in the development of a glass/ceramic matrix with all existing porosity infilled via sintering and the formation of a vitreous phase, whilst the physical integrity was retained (no cracking or spalling). This study demonstrates that, based on small-scaled specimens, blended MKPC binders should perform satisfactorily under fire performance parameters relevant to the operation of a geological disposal facility, up to at least 1200 °C.

36 MATERIALS SCIENCE↗
DOE OSTI2025

On the Stability Analysis of Astrophysical Cooling Functions

To model the temperature evolution of optically thin astrophysical environments at MHD scales, radiative and collisional cooling rates are typically either pretabulated or fit into a functional form and then input into MHD codes as a radiative loss function. Thermal balance requires estimates of the analogous heating rates, which are harder to calculate, and due to uncertainties in the underlying dissipative heating processes these rates are often simply parameterized. The resulting net cooling function defines an equilibrium curve that varies with density and temperature. Such cooling functions can make the gas prone to thermal instability (TI), which will cause departures from equilibrium. There has been no systematic study of thermally unstable parameter space for nonequilibrium states. Motivated by our recent finding that there is a related linear instability, catastrophic cooling instability, that can dominate over TI, here we carry out such a study. We show that Balbus instability criteria for TI can be used to define a critical cooling rate, Λ c , that permits a nonequilibrium analysis of cooling functions through the mapping of TI zones. We furthermore illustrate how thermal conduction modifies the shape of TI zones. Upon applying a Λ c -based stability analysis to coronal loop simulations, we find that loops undergoing periodic episodes of coronal rain formation are linearly unstable to catastrophic cooling instability, while TI is stabilized by thermal conduction.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Performance of Julia for High Energy Physics Analyses

We argue that the Julia programming language is a compelling alternative to currently more common implementations in Python and C++ for common data analysis workflows in high energy physics. We compare the speed of implementations of different workflows in Julia with those in Python and C++. Furthermore, our studies show that the Julia implementations are competitive for tasks that are dominated by computational load rather than data access. For work that is dominated by data access, we demonstrate an application with concurrent file reading and parallel data processing.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Structural analysis of a new carotenoid-binding protein: the C-terminal domain homolog of the OCP

Abstract The Orange Carotenoid Protein (OCP) is a water-soluble protein that governs photoprotection in many cyanobacteria. The 35 kDa OCP is structurally and functionally modular, consisting of an N-terminal effector domain (NTD) and a C-terminal regulatory domain (CTD); a carotenoid spans the two domains. The CTD is a member of the ubiquitous Nuclear Transport Factor-2 (NTF2) superfamily (pfam02136). With the increasing availability of cyanobacterial genomes, bioinformatic analysis has revealed the existence of a new family of proteins, homologs to the CTD, the C-terminal domain-like carotenoid proteins (CCPs). Here we purify holo-CCP2 directly from cyanobacteria and establish that it natively binds canthaxanthin (CAN). We use small-angle X-ray scattering (SAXS) to characterize the structure of this carotenoprotein in two distinct oligomeric states. A single carotenoid molecule spans the two CCPs in the dimer. Our analysis with X-ray footprinting-mass spectrometry (XFMS) identifies critical residues for carotenoid binding that likely contribute to the extreme red shift (ca. 80 nm) of the absorption maximum of the carotenoid bound by the CCP2 dimer and a further 10 nm shift in the tetramer form. These data provide the first structural description of carotenoid binding by a protein consisting of only an NTF2 domain.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

In-situ observations of cyclic deformation in an extruded Mg-2Nd-1Y-0.1Zr-0.1Ca alloy

In this study, the evolution of deformation mechanisms during cyclic loading in an extruded, solution-treated Mg–2Nd–1Y–0.1Zr–0.1Ca alloy was investigated using a combination of in-situ loading, scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and focused ion beam (FIB) nanofabrication. The initial microstructure exhibited a random crystallographic texture with no preferred grain orientation. Flat, rectangular dog-bone specimens were subjected to load-controlled, fully reversed fatigue for 50 cycles, during which the same region was sequentially mapped to track microstructural changes. After 10 cycles of loading deformation twins were observed. During tensile reloading detwinning or narrowing of those twinned regions occurred. After 20 cycles, detwinning ceased and residual twins remained in the material. SEM imaging revealed numerous surface slip traces after cyclic loading. EBSD-assisted slip trace analysis identified the activation of prismatic and pyramidal < c+a> slip systems during low-cycle fatigue. Site-specific scanning transmission electron microscopy (STEM) further revealed that deformation was also accommodated by basal < a> slip and the dissociation of < c+a> dislocations. Center-of-symmetry (COS) analysis confirmed that the dissociation of < c+a> dislocations resulted in the formation of I₁ intrinsic stacking faults after cyclic loading. These findings provide new insights into the complex interplay of dislocation mechanisms governing fatigue deformation in rare-earth-containing Mg alloys.

Cyclic deformation↗
DOE OSTI2025

Structural basis of differential gene expression at eQTLs loci from high-resolution ensemble models of 3D single-cell chromatin conformations

Abstract Motivation Techniques such as high-throughput chromosome conformation capture (Hi-C) have provided a wealth of information on nucleus organization and genome important for understanding gene expression regulation. Genome-Wide Association Studies have identified numerous loci associated with complex traits. Expression quantitative trait loci (eQTL) studies have further linked the genetic variants to alteration in expression levels of associated target genes across individuals. However, the functional roles of many eQTLs in noncoding regions remain unclear. Current joint analyses of Hi-C and eQTLs data lack advanced computational tools, limiting what can be learned from these data. Results We developed a computational method for simultaneous analysis of Hi-C and eQTL data, capable of identifying a small set of nonrandom interactions from all Hi-C interactions. Using these nonrandom interactions, we reconstructed large ensembles (×105) of high-resolution single-cell 3D chromatin conformations with thorough sampling, accurately replicating Hi-C measurements. Our results revealed many-body interactions in chromatin conformation at the single-cell level within eQTL loci, providing a detailed view of how 3D chromatin structures form the physical foundation for gene regulation, including how genetic variants of eQTLs affect the expression of associated eGenes. Furthermore, our method can deconvolve chromatin heterogeneity and investigate the spatial associations of eQTLs and eGenes at subpopulation level, revealing their regulatory impacts on gene expression. Together, ensemble modeling of thoroughly sampled single-cell chromatin conformations combined with eQTL data, helps decipher how 3D chromatin structures provide the physical basis for gene regulation, expression control, and aid in understanding the overall structure-function relationships of genome organization. Availability and implementation It is available at https://github.com/uic-liang-lab/3DChromFolding-eQTL-Loci.

Du, Lin (ORCID:0009000289869812)↗
DOE OSTI2023

${\Lambda}_c^{+}$ polarimetry using the dominant hadronic mode

The polarimeter vector field for multibody decays of a spin-half baryon is intro duced as a generalisation of the baryon asymmetry parameters. Using a recent amplitude analysis of the ${\Lambda}_c^{+}$ → $pK^-π^+$ decay performed at the LHCb experiment, we compute the distribution of the kinematic-dependent polarimeter vector for this process in the space of Mandelstam variables to express the polarised decay rate in a model-agnostic form. The obtained representation can facilitate polarisation measurements of the ${\Lambda}_c^{+}$ baryon and eases inclusion of the ${\Lambda}_c^{+}$ → $pK^-π^+$ decay mode in hadronic amplitude analyses.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Radiation induced hardening of beryllium during low temperature He implantation

The effect of ion irradiation on evolution of microstructure and hardening of beryllium with different impurity levels was investigated using TEM and nanoindentation. High purity S-65 grade and less-pure S-200-F grade were implanted by helium ions at temperatures of 50°C and 200°C. 11 different energies were used, so as to create a quasi-homogeneous 3 µm irradiated layer with average radiation damage of 0.1 dpa and average He content of 2000 appm.Nanoindentation experiments demonstrated that before irradiation, the S-200-F and S-65 grades have an average hardness of 3.7$\pm$0.8 GPa and 3.4$\pm$0.8 GPa correspondently. After implantation the hardness of both grades increased by about 60% for the 200°C irradiation and 100% for the 50°C irradiation. The crystallographic analysis of indented grains demonstrated that in the as-received materials the hardness is about 2.5 times higher when the indentation direction is close to the [0001] c-axis of beryllium compared to indentation perpendicular to [0001]. Hardness anisotropy significantly decreased after irradiation: the “soft orientation” was most sensitive to irradiation-induced hardening, with hardness increasing by about 140% after irradiation at 50°C and 100% after irradiation at 200°C, compared to about 15 - 20% for the “hard” orientation at both irradiation temperatures. The higher purity grade had smaller increase of the “soft orientation” hardness: 2.5$\pm$0.3 GPa for the S-65 and 2.9$\pm$0.2 GPa for the S-200-F.At both temperatures in both grades, under TEM investigation the radiation damage appears as “black dots” which are likely to be small dislocation loops with the number density of ~ 10 22 m -3 . No bubbles were observed by TEM inside grains and at grain boundaries. Analysis of the possible hardening contribution demonstrated that the observed “black dots” could be responsible for up to half of the measured hardening, while the rest of the hardening should originate from helium bubbles with the size below the TEM resolution (at or below 1.5 nm).

36 MATERIALS SCIENCE↗
DOE OSTI2021

Quantitative Risk Analysis of High Safety Significant Safety-related Digital Instrumentation and Control Systems in Nuclear Power Plants using IRADIC Technology

This report documents the activities performed by Idaho National Laboratory (INL) during fiscal year (FY) 2021 for the U.S. Department of Energy (DOE) Light Water Reactor Sustainability (LWRS) Program, Risk Informed Systems Analysis (RISA) Pathway, digital instrumentation and control (DI&C) Risk Assessment project. In FY-2019, the RISA Pathway initiated a project to develop a risk assessment strategy for delivering a strong technical basis to support effective, licensable, and secure DI&C technologies for digital upgrades/designs. An integrated risk assessment technology for the DI&C systems (IRADIC technology) was proposed for this strategy, which aims to (1) provide a best-estimate risk-informed capability to quantitatively and accurately estimate the safety margin obtained from plant modernization, especially for the High Safety Significant Safety-related (HSSSR) DI&C systems, (2) develop an advanced risk assessment technology to support transition from analog to DI&C technologies for nuclear industry, (3) assure the long-term safety and reliability of vital HSSSR DI&C systems, (4) reduce uncertainty in costs and support integration of DI&C systems in the plant. To achieve these technical goals and deal with the expensive licensing justifications from regulatory insights, the IRADIC technology is instructive for nuclear vendors and utilities to effectively lower the costs associated with digital compliance and speed industry advances by: (1) defining an integrated risk-informed analysis process for DI&C upgrade, including hazard analysis, reliability analysis, and consequence analysis, (2) applying systematic and risk-informed tools to address common cause failures (CCFs) and quantify responding failure probabilities for DI&C technologies, particularly software CCFs, (3) evaluating the impact of digital failures at the individual level, system level, and plant level, (4) providing insights and suggestions on designs to manage the risks; thus, to support the development, licensing, and deployment of advanced DI&C technologies on nuclear power plant (NPPs). In this report, an approach for performing software CCF analysis, given limited data, is developed and demonstrated using a case study of a highly redundant digital reactor trip system. Consequence analysis is also performed based on different accident scenarios. Results indicate that plant modernization including the improvement of HSSSR DI&C systems will make great benefits to plant safety by providing more safety margins to accident management. In addition, a novel approach is proposed in this report for the quantification of software hazards when sufficient operational and testing data available. The method incorporates software development quality as well as strong analysis techniques to identify and link software defects to potential failure modes. The approach includes both semantic and test-based analysis to detect failures that can exist in different stages of the software development life cycle. This method is applied to an advanced human system interface relevant to reactor trip safety developed from the APR 1400 design.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Mechanochemical synthesis of hydraulically reactive calcium silicate minerals via thermally-assisted mechanical grinding

This study explores a thermally assisted mechanochemical approach alternative to conventional cement synthesis as a potential to produce hydraulically reactive calcium silicate phases. Ball milling of mixed CaO/SiO 2 feedstocks at temperature ranges 100-300 °C increases the formation of the Ca-O-Si bonds and precursor reactivity. Spectroscopic analyses (FTIR, MAS-NMR, UV-Vis DRS) indicate increasing amorphization with milling temperature, attributed to improved mixing and thermally assisted diffusion. Upon hydration, all treated samples exhibit exothermic heat release, with the sample prepared at 300 °C showing the most pronounced reactivity. Thermal analysis reveals weight loss consistent with C-S-H formation, confirming cement-like behavior. In summary, moderate thermal input during milling promotes structural activation and enhances downstream hydraulic reactivity, providing a proof-of-concept for energy-reduced cement precursor processing.

Alite↗
DOE OSTI2023

Risk Analysis of Various Design Architectures for High Safety-significant Safety-related Digital Instrumentation and Control Systems of Nuclear Power Plants during Accident Scenarios

This report documents the plus-up activities performed by Idaho National Laboratory (INL) during Fiscal Year (FY) 2022 for the U.S. Department of Energy (DOE) Light Water Reactor Sustainability (LWRS) Program, Risk Informed Systems Analysis (RISA) Pathway, digital instrumentation and control (DI&C) risk assessment project. In FY 2019, the RISA Pathway initiated a project to develop a risk assessment strategy for delivering a strong technical basis to support effective, licensable, and secure DI&C technologies for digital upgrades/designs. An integrated risk assessment technology for the DI&C systems was proposed for this strategy, which aims to (1) provide a best-estimate, risk-informed capability to quantitatively and accurately estimate the safety margin obtained from plant modernization, especially for the high safety-significant safety-related (HSSSR) DI&C systems, (2) support and supplement existing advanced risk-informed DI&C design guides by providing quantitative risk information and evidence, (3) offer a capability of design architecture evaluation of various DI&C systems to support system design decisions and diversity and redundancy applications, (4) assure the long-term safety and reliability of HSSSR DI&C systems, and (5) reduce uncertainty in costs and support integration of DI&C systems in the plant. To achieve these technical goals and deal with the expensive licensing justifications from regulatory insights, the LWRS-developed framework instructs nuclear vendors and utilities on how to effectively lower the costs associated with digital compliance and speed industry advances by: (1) defining an integrated risk-informed analysis process for DI&C upgrade, including hazard analysis, reliability analysis, and consequence analysis, (2) applying systematic and risk-informed tools to address common cause failures (CCFs) and quantify corresponding failure probabilities for DI&C technologies, particularly software CCFs, (3) evaluating the impact of digital failures at the component level, system level, and plant level, and (4) providing insights and suggestions on designs to manage the risks, thus to support the development, licensing, and deployment of advanced DI&C technologies on nuclear power plant (NPPs). Adding diversity within system or components is the main means to eliminate and mitigate CCFs, but diversity also increases plant complexity and errors and may not address all sources of systematic failures. How to optimize the diversity and redundancy applications for the safety-critical DI&C systems remains a challenge. To deal with the technical issues in addressing potential software CCFs in HSSSR DI&C systems of NPPs and supporting relevant design optimization, the framework provides: ? An integrated best-estimate, risk-informed capability to address new technical digital issues quantitatively, accurately, and efficiently in plan modernization progress, such as software CCFs in HSSSR DI&C systems of NPPs ? A common and a modularized platform for DI&C designers, software developers, cybersecurity analysts, and plant engineers to efficiently predict and prevent risk in the early design stage of DI&C systems ? Technical bases and risk-informed insights to assist U.S. Nuclear Regulatory Commission (NRC) and industry to address and fulfill the risk-informed alternatives for evaluation of CCFs in HSSSR DI&C systems of NPPs ? An integrated risk-informed tool that offers a capability of design architecture evaluation of various DI&C systems to support system design decisions in diversity and redundancy applications. The plus-up research and development efforts of this project in FY 2022 are focused on methodology improvement of software CCF modeling and estimation, prevention analysis, importance analysis and risk analysis of various design architectures of HSSSR DI&C systems. This work greatly enhances the capability of the LWRS-developed framework for the risk assessment and design optimization of safety-critical DI&C systems. It should be noted that all the analyses are performed for the demonstration of the LWRS-developed framework, not for the evaluation of relevant systems. Results are obtained based on very limited design information and testing data.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗