Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boosting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

In situ Synchrotron X‐ray Metrology Boosted by Automated Data Analysis for Real‐time Monitoring of Cathode Calcination

Abstract Synchrotron X‐ray‐based in situ metrology is advantageous for monitoring the synthesis of battery materials, offering high throughput, high spatial and temporal resolution, and chemical sensitivity. However, the rapid generation of massive data poses a challenge to on‐site, on‐the‐fly analysis needed for real‐time process monitoring. Here, a weighted lagged cross‐correlation (WLCC) similarity approach is presented for automated data analysis, which merges with in situ synchrotron X‐ray diffraction metrology to monitor the calcination process of the archetypal nickel‐based cathode, LiNiO 2 . The WLCC approach, incorporating variables that account for peak shifts and width changes associated with structural transformations, enables rapid extraction of phase progression within 10 seconds from tens of diffraction patterns. Details are captured, from initial precursors to intermediates and the final layered LiNiO 2 , providing information for agile on‐site adjustments during experiments and complementing post hoc diffraction analysis by offering insights into early‐stage phase nucleation and growth. Expanding this data‐powered platform paves the way for real time calcination process monitoring and control, which is pivotal to quality control in battery cathode manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Search for heavy resonances decaying to a pair of Lorentz-boosted Higgs bosons in final states with leptons and a bottom quark pair at $ \sqrt{s} $ = 13 TeV

A search for new heavy resonances decaying to a pair of Higgs bosons (HH) in proton-proton collisions at a center-of-mass energy of 13 TeV is presented. Data were collected with the CMS detector at the LHC in 2016–2018, corresponding to an integrated luminosity of 138 fb - 1 . Resonances with a mass between 0.8 and 4.5 TeV are considered using events in which one Higgs boson decays into a bottom quark pair and the other into final states with either one or two charged leptons. Specifically, the single-lepton decay channel HH → b b ¯ WW * → b b ¯ ℓ v q q ¯ ' and the dilepton decay channels HH → b b ¯ WW * → b b ¯ ℓ v ℓ v and HH → b b ¯ ττ → b b ¯ ℓ vv ℓ vv are examined, where ℓ in the final state corresponds to an electron or muon. The signal is extracted using a two-dimensional maximum likelihood fit of the H → b b ¯ jet mass and HH invariant mass distributions. No significant excess above the standard model expectation is observed in data. Model-independent exclusion limits are placed on the product of the cross section and branching fraction for narrow spin-0 and spin-2 massive bosons decaying to HH. The results are also interpreted in the context of radion and bulk graviton production in models with a warped extra spatial dimension. The results provide the most stringent limits to date for X → HH signatures with final-state leptons and at some masses provide the most sensitive limits of all X → HH searches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Boosting background suppression in the NEXT experiment through Richardson-Lucy deconvolution

Next-generation neutrinoless double beta decay experiments aim for half-life sensitivities of ~ 10 27 yr, requiring suppressing backgrounds to < 1 count/tonne/yr. For this, any extra background rejection handle, beyond excellent energy resolution and the use of extremely radiopure materials, is of utmost importance. The NEXT experiment exploits differences in the spatial ionization patterns of double beta decay and single-electron events to discriminate signal from background. While the former display two Bragg peak dense ionization regions at the opposite ends of the track, the latter typically have only one such feature. Thus, comparing the energies at the track extremes provides an additional rejection tool. The unique combination of the topology-based background discrimination and excellent energy resolution (1% FWHM at the Q-value of the decay) is the distinguishing feature of NEXT. Previous studies demonstrated a topological background rejection factor of ~ 5 when reconstructing electron-positron pairs in the 208Tl 1.6 MeV double escape peak (with Compton events as background), recorded in the NEXT-White demonstrator at the Laboratorio Subterráneo de Canfranc, with 72% signal efficiency. This was recently improved through the use of a deep convolutional neural network to yield a background rejection factor of ~ 10 with 65% signal efficiency. Here, we present a new reconstruction method, based on the Richardson-Lucy deconvolution algorithm, which allows reversing the blurring induced by electron diffusion and electroluminescence light production in the NEXT TPC. The new method yields highly refined 3D images of reconstructed events, and, as a result, significantly improves the topological background discrimination. When applied to real-data 1.6 MeV e - e + pairs, it leads to a background rejection factor of 27 at 57% signal efficiency.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Search for boosted diphoton resonances in the 10 to 70 GeV mass range using 138 fb –1 of 13 TeV $pp$ collisions with the ATLAS detector

A search for diphoton resonances in the mass range between 10 and 70 GeV with the ATLAS experiment at the Large Hadron Collider (LHC) is presented. The analysis is based on pp collision data corresponding to an integrated luminosity of 138 fb – 1 at a centre-of-mass energy of 13 TeV recorded from 2015 to 2018. Previous searches for diphoton resonances at the LHC have explored masses down to 65 GeV, finding no evidence of new particles. This search exploits the particular kinematics of events with pairs of closely spaced photons reconstructed in the detector, allowing examination of invariant masses down to 10 GeV. The presented strategy covers a region previously unexplored at hadron colliders because of the experimental challenges of recording low-energy photons and estimating the backgrounds. No significant excess is observed and the reported limits provide the strongest bound on promptly decaying axion-like particles coupling to gluons and photons for masses between 10 and 70 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Tailoring the d-band center on Ru 1 Cu single-atom alloy nanotubes for boosting electrochemical non-enzymatic glucose sensing

The development of cost-effective and highly efficient electrocatalysts is critical to help electrochemical non-enzymatic sensors achieve high performance. Here, in this work, a new class of catalyst, Ru single atoms confined on Cu nanotubes as a single-atom alloy (Ru 1 Cu NTs), with a unique electronic structure and property, was developed to construct a novel electrochemical non-enzymatic glucose sensor for the first time. The Ru 1 Cu NTs with a diameter of about 24.0 nm showed a much lower oxidation potential (0.38 V) and 9.0-fold higher response (66.5 μA) current than Cu nanowires (Cu NWs, oxidation potential 0.47 V and current 7.4 μA) for glucose electrocatalysis. Moreover, as an electrochemical non-enzymatic glucose sensor, Ru1Cu NTs not only exhibited twofold higher sensitivity (54.9 μA mM −1 cm −2 ) and wider linear range (0.5–8 mM) than Cu NWs, but also showed a low detection limit (5.0 μM), excellent selectivity, and great stability. According to theoretical calculation results, the outstanding catalytic and sensing performance of Ru 1 Cu NTs could be ascribed to the upshift of the d-band center that helped promote glucose adsorption. This work presents a new avenue for developing highly active catalysts for electrochemical non-enzymatic sensors.

electrochemistry↗
DOE OSTI2025

Synthetic feed-forward loop circuit boosts transgene expression in sugarcane

Bio-based products derived from natural plant-derived materials offer a promising alternative to petroleum-based products, which are essential for achieving global sustainability (Gupta et al. 2022). Sugarcane provides 40% of the world’s biofuel (Brant et al. 2025). Recently, metabolic engineering of sugarcane for hyperaccumulation of biomass oil is emerging as a strategy to elevate the crop’s energy content (Cao et al. 2023; Maitra et al. 2024). Synthetic transcription factors offer a powerful tool for modulating entire metabolic pathways by enabling fine-tuned activation or repression of specific genes (Liu and Stewart 2016; Hooghvorst and Altpeter 2023). However, the application of these technologies faces challenges, including the availability of well-characterized genetic building blocks for precise manipulation of gene expression, and the inherently challenging properties of gene expression in highly polyploid crops like sugarcane (Liu and Stewart 2016).

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Dual active site tandem catalysis of metal hydroxyl oxides and single atoms for boosting oxygen evolution reaction

We report the high voltage in oxygen evolution reaction (OER) often causes structural change in electrocatalysts and forms multiple active sites. Therefore, exploring the synergy of various active sites is extremely significant to develop catalysts for OER with multiple elementary steps. Herein, we adopt the physically adsorbed metal ions method to successfully synthesize a highly-efficient electrocatalyst containing the dual active sites of Fe-NiOOH and NiC4 single atoms (marked as Ni SAs/Fe-NiOOH). The Ni SAs/Fe-NiOOH displays outstanding OER performance with an overpotential of 269 mV to deliver current density of 10 mA/cm 2 that shows 55 mV superior to commercial IrO 2 /CB at the same condition. Experiments and density functional theory calculations indicate that the excellent OER activity of Ni SAs/Fe-NiOOH catalyst is attributed to the synergy of dual active sites of NiC 4 SAs and Fe-NiOOH. A tandem catalysis mechanism is also proposed to reveal the synergism of two active centers, which makes the potential-determining step more facile and accordingly decreases the OER overpotential. This work offers a new concept of tandem catalysis to develop the electrocatalysts with many elemental steps, like OER and oxygen reduction reaction catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ionomer-free nanoporous iridium nanosheet electrodes with boosted performance and catalyst utilization for high-efficiency water electrolyzers

Increasing the catalyst utilization efficiency and simplifying electrode fabrication processes are crucial to accelerate development of low-cost proton exchange membrane electrolyzer cells (PEMECs). Here, we develop a facile route to fabricate ionomer-free iridium nanosheet integrated electrodes, in which nanoporous iridium nanosheets (IrNS) with abundant exposed edges and nanopores are deposited on thin titanium liquid/gas diffusion layers (TT-LGDLs) via a low-temperature chemical synthesis strategy. Further, benefiting from high catalytic activity, good electrode conductivity and excellent liquid/gas transport properties, such nanoporous IrNS electrodes with low catalyst loadings require low cell voltages of 1.65 V and 1.78 V at 3000 and 6000 mA/cm 2 , respectively. More impressively, a stable performance can be well maintained under extremely high current density tests of 5000 mA/cm 2 , demonstrating the potential of low-loading nanoporous IrNS electrodes in solid-electrolyte based electrochemical conversion cells that require high current density operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Orbital engineering of C 3 N monolayer to design efficient synergistic sites electrocatalyst for boosting alkaline hydrogen evolution

Alkaline water electrolyzer (AWE) is one of the promising technologies for hydrogen production at the industrial level. However, energetic inefficiency and low current density impede the development of AWE. Compared with acidic conditions, the Volmer step in alkaline hydrogen evolution reaction (HER) involves extra water dissociation, whose barrier is one of the most vital reasons for the sluggish kinetics of alkaline HER. Herein, choosing C 3 N monolayer as an ideal theoretical model, we design several empty orbitals through intentional metal doping, and further construct synergistic sites on the C 3 N monolayer to accelerate both water dissociation and hydrogen adsorption for alkaline HER. Furthermore, the as-designed Be-doped and Cr-doped C 3 N monolayers exhibit rather low theoretical overpotential of 0.476 eV and 0.216 eV for alkaline HER, respectively, which are even lower than Pt (1 1 1) surface. Moreover, by comparing the water dissociation behaviors on metal-doped C3N monolayer, we find that the empty orbitals with suitable orientation and energy level are useful for promoting the water dissociation process, indicating that we can use orbital engineering strategy to regulate the adsorption strength between adsorbate and surface site. Consequently, it is reasonable to suggest that our orbital engineering strategy would significantly benefit the design of highly efficient alkaline HER electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗