Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Bond”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Stable Carbon-Selenium Bonds for Enhanced Performance in Tremella -Like 2D Chalcogenide Battery Anode [Stable Carbon-Selenium Bonds for Enhanced Performance in Tremella -Like Two-Dimensional Chalcogenide Battery Anode]

Two-dimensional cobalt selenide based on conversion reaction has attracted much attention due to its open layered structure and high specific capacity. However, effectively suppressing the fast capacity fade caused by the irreversible Se dissolution and serious volume change during the cycling process is still a challenges. Herein, we tune the concentration of dispersion liquid under supercritical condition to induce the CoSe crystal to grow along the graphene oxide (GO), and finally obtain the Tremella -like CoSe-rGO hybrid. The nature of epitaxial growth leads to the formation of stable C–Se bonds, which maintains favorable conductive connection between CoSe and reduced GO (rGO) as well as enhances the mechanical strength of active material to suppress Se dissolution and volume expansion during Na/Li intercalation and deintercalation. The unique microstructural merits of the hybrid result in superior sodium/lithium storage performance (400.8 mAh g -1 at 1 A g -1 after 100 cycles for NIBs and 769.6 mAh g -1 at 2 A g -1 after 500 cycles for LIBs). Moreover, the transmission X-ray microscopy technique is firstly used to directly observe the Se segregation in cobalt selenide and it being suppressed by the C–Se bonds.

25 ENERGY STORAGE↗

Examination of Structure and Bonding in 10-Coordinate Europium and Americium Terpyridyl Complexes

M(TpyNO 2 )(NO 3 ) 3 (H 2 O)·THF (M = La, Ce, Nd, Sm, Eu, Am; TpyNO 2 = 4’-nitrophenyl terpyridyl) have been prepared from the reaction of M(NO 3 ) 3 ·nH 2 O with TpyNO 2 in THF. Structural analysis shows that the metal centers are ten-coordinate, providing the first example of Am III with this coordination number. Further spectroscopic and theoretical evaluation of these complexes reveals utilization of the 5f orbitals in bonding in the Am III complex. Comparison of Nd‒L, Eu‒L, and Am‒L bond distances demonstrates that some caution should be taken in comparing Eu III versus Am III in extraction experiments.

anions↗

Structural Evolution, Sequential Oxidation, and Chemical Bonding in Tritantalum Oxide Clusters: Ta3On- and Ta3On(n=1-8)

We report a combined photoelectron spectroscopy (PES) and density functional theory (DFT) study on a series of tri-tantalum oxide clusters, Ta3On-. Well-resolved PES spectra are obtained for Ta3On- (n = 1-8) at several detachment photon energies, yielding electronic structure information which is used to compare with the DFT calculations. A trend of sequential oxidation is observed as a function of O content until Ta3O8-, which is a stoichiometric cluster. Extensive DFT calculations are performed in search of the lowest energy structures for both the anions and neutrals. The first three O atoms are shown to successively occupy the bridging sites in the Ta3 triangle. The next three O atoms each occupy a terminal site, with the seventh and eighth O atoms forming a double-bridge and a double-terminal, respectively. The Ta3O7- anion is found to possess a localized electron pair on a single Ta center, making it an interesting molecular model for Ta3+ surface sites. Molecular orbital analyses are performed to elucidate the chemical bonding in the Ta3On- clusters.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effect of pretreatment bias on the nucleation and growth mechanisms of ultrananocrystalline diamond films via bias-enhanced nucleation and growth: An approach to interfacial chemistry analysis via chemical bonding mapping

The effect of pretreatment bias on the nucleation and growth mechanisms of the ultrananocrystalline diamond (UNCD) films on the Si substrate via bias-enhanced nucleation and bias-enhanced growth (BEN-BEG) was investigated using cross-sectional high-resolution transmission electron microscopy, chemical bonding mapping, and Raman spectroscopy. The mirror-polished substrate surface showed the formation of a triangular profile produced by a dominant physical sputtering mechanism induced by ion bombardment of ions from the hydrogen plasma accelerated toward the substrate due to biasing and a potential hydrogen-induced chemical reaction component before synthesizing the UNCD films. The BEN-BEG UNCD films grown on the Si substrate with biased and unbiased pretreatments in the hydrogen plasma were compared. In the case of the bias-pretreated substrate, the SiC phases were formed at the peaks of the Si surface triangular profile due to the active unsaturated Si bond and the enhanced local electrical field. The UNCD grains grew preferentially at the peaks of the triangular substrate surface profile and rapidly covered the amorphous carbon (a-C) and oriented graphite phases formed in the valley of the surface profile. In the case of the substrate with unbiased pretreatment, the SiC phases were formed via the reactions between the hydrocarbon species and the active Si atoms released from the substrate with assistance of the hydrogen plasma. The UNCD grains nucleated on the nucleating sites consisting of the SiC, a-C, and graphite phases. Growth mechanisms for the BEN-BEG UNCD films on both Si substrates were proposed to elucidate the different nucleation processes. Applying bias on the Si substrate pretreated in the hydrogen plasma optimized the nucleation sites for growth of UNCD grains, resulting in the low content of the nondiamond phases in UNCD films.

36 MATERIALS SCIENCE↗

Relativistic effects for the reaction Sg + 6 CO → Sg(CO){sub 6}: Prediction of the mean bond energy, atomization energy, and existence of the first organometallic transactinide superheavy hexacarbonyl Sg(CO){sub 6}

Our ab initio all-electron fully relativistic Dirac–Fock (DF) and nonrelativistic (NR) Hartree-Fock calculations predict the DF relativistic and NR energies for the reaction: Sg + 6 CO → Sg(CO){sub 6} as −7.39 and −6.96 eV, respectively, i.e., our calculated ground state total DF relativistic and NR energies for the reaction product Sg(CO){sub 6} are lower by 7.39 and 6.96 eV than the total DF and NR ground state energies of the reactants, viz., one Sg atom plus six CO molecules, respectively. Our calculated DF relativistic and NR atomization energies (Ae) are 65.23 and 64.82 eV, respectively, and so the contribution of relativistic effects to the Ae of ∼0.40 eV is marginal. The Sg–C and C–O optimized bond distances for the octahedral geometry as calculated in our DF (NR) calculations are 2.151 (2.318 Å) and 1.119 (1.114 Å), respectively. The BSSE correction calculated using the DIRAC code ∼14 kcal/mol. The relativistic DF and NR mean energies predicted by us are 118.8 and 111.9 kJ/mol, respectively, and the contribution of ∼7 kJ/mol due to relativistic effects to the mean energy of Sg(CO){sub 6} is negligible. Ours are the first calculations of the relativistic effects for the atomization energy, mean bond energy, and energy of the reaction for possible formation of Sg(CO){sub 6}, and both our relativistic DF and the NR treatments clearly predict for the first time the existence of hexacarbonyl of the transactinide superheavy element seaborgium Sg. In conclusion, relativistic effects are not significant for Sg(CO){sub 6}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Abnormal variation of band gap in Zn doped Bi{sub 0.9}La{sub 0.1}FeO{sub 3} nanoparticles: Role of Fe-O-Fe bond angle and Fe-O bond anisotropy

Bi{sub 0.9}La{sub 0.1}FeO{sub 3} (BLFO) and Bi{sub 0.9}La{sub 0.1}Fe{sub 0.99}Zn{sub 0.01}O{sub 3} (BLFZO) nanoparticles were prepared via a sol-gel method. The oxygen vacancies and holes increase with Zn doping analyzed through X-ray photoelectron spectroscopy, which could contribute to the increase of leakage current density. However, with the increase of the defects (oxygen vacancies and holes), the band gap of BLFZO also is increased. To explain the abnormal phenomenon, the bandwidth of occupied and unoccupied bands was analyzed based on the structural symmetry driven by the Fe-O-Fe bond angle and Fe-O bond anisotropy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface Functionalization of Black Phosphorus with Nitrenes: Identification of P=N Bonds Using Isotopic Labeling

Abstract: Surface functionalization of two-dimensional crystals is a key path to tuning their intrinsic physical and chemical properties. However, synthetic protocols and experimental strategies to directly probe chemical bonding in modified surfaces are scarce. Introduced here is a mild, surface-specific protocol for the surface functionalization of few-layer black phosphorus nanosheets using a family of photolytically generated nitrenes (RN) from the corresponding azides. By embedding spectroscopic tags in the organic backbone, a multitude of characterization techniques are employed to investigate in detail the chemical structure of the modified nanosheets, including vibrational (infrared, Raman), Xray (emission, photoelectron), CPMAS NMR, and UV-vis spectroscopy. To directly probe the functional groups introduced on the surface, R fragments were selected such that in conjunction with vibrational spectroscopy, 15N-labeling experiments, and DFT methods, diagnostic P=N vibrational modes indicative of iminophosphorane units on the nanosheet surface could be conclusively identified.

Walz, Kendall↗

Fabrication of highly dense isotropic Nd-Fe-B nylon bonded magnets via extrusion-based additive manufacturing [Fabrication of highly dense isotropic Nd-Fe-B bonded magnets via extrusion-based additive manufacturing]

Magnetically isotropic bonded magnets with a high loading fraction of 70 vol.% Nd-Fe-B are fabricated via an extrusion-based additive manufacturing, or 3D printing system that enables rapid production of large parts. The density of the printed magnet is ~5.2 g/cm 3 . The room temperature magnetic properties are: intrinsic coercivity H ci = 8.9 kOe (708.2 kA/m), remanence B r = 5.8 kG (0.58 T), and energy product (BH)max = 7.3 MGOe (58.1 kJ/m 3 ). The as-printed magnets are then coated with two types of polymers, both of which improve the thermal stability as revealed by flux aging loss measurements. Tensile tests performed at 25 °C and 100 °C show that the ultimate tensile stress (UTS) increases with increasing loading fraction of the magnet powder, and decreases with increasing temperature. AC magnetic susceptibility and resistivity measurements show that the 3D printed Nd-Fe-B bonded magnets exhibit extremely low eddy current loss and high resistivity. Lastly, we demonstrate the performance of the 3D printed magnets in a DC motor configuration via back electromotive force measurements.

36 MATERIALS SCIENCE↗

Microstructure and mechanical properties of joints in sintered SiC fiber-bonded ceramics brazed with Ag Cu Ti alloy

Active metal brazing of a new high thermal conductivity sintered SiC-polycrystalline fiber-bonded ceramic (SA-Tyrannohexs) has been carried out using a Ti-containing Ag Cu active braze alloy (Cusil-ABAs). The brazed composite joints were characterized using scanning electron microscopy coupled with energy-dispersive X-ray spectrometry (SEM EDS). The results show that this material can be successfully joined using judiciously selected off-the shelf active braze alloys to yield metallurgically sound joints possessing high integrity. Uniform and continuous joints were obtained irrespective of differences in the fiber orientation in the substrate material. Detailed interfacial microanalysis showed that the titanium reacts with C and Si to form TiC layer and a Ti Si compound, respectively. Furthermore, the evaluation of shear strength of the joints was also conducted at ambient and elevated temperatures in air using the single-lap offset (SLO) shear test. The perpendicular-type SA-Tyrannohex joints exhibited apparent shear strengths of about 42 MPa and 25 MPa at 650 1C and 750 1C, respectively. The fracture at the higher temperature occurred at the interface between the reactionformed TiC layer and braze. This might be caused by generation of stress intensity when a shear stress was applied, according to m-FEA simulation results.

Singh, Mrityunjay↗

Hydrogen Bonding Controls the Structural Evolution in Perovskite-Related Hybrid Platinum(IV) Iodides

In this paper, we describe the solid-state structural evolution in four hybrid hexaiodoplatinate(IV) compounds, demonstrating the increasingly important role that extended hydrogen bonding plays in directing the structure across the series. The compounds are A 2 PtI 6 , where A is one of the following amines: ammonium, NH 4 + ; methylammonium, CH 3 NH 3 + ; formamidinium, CH(NH 2 ) 2 + ; guanidinium, C(NH 2 ) 3 + . These are closely related in structure and properties to the hybrid halide perovskites of lead(II) that have recently established their prowess in optoelectronics. The first three of these compounds crystallize in the vacancy-ordered double perovskite A 2 Pt$\square$I 6 ($\square$ indicates a vacant site) structure in the K 2 PtCl 6 archetype, despite the relatively large perovskite tolerance factors involved. The last compound, (GUA) 2 PtI 6 , crystallizes in a vacancy-ordered variant of the hexagonal CsNiCl 3 structure: the K 2 MnF 6 structure. A combination of solid-state 195 Pt and 1 H NMR spectroscopy and detailed density functional theory calculations helps to reveal structural trends and establish the hydrogen-bonding tendencies. Finally, the calculations and measured optical properties support the surprising observation in these iodosalt compounds that, for smaller A cations, the conduction bands are considerably disperse, despite lacking extended I–Pt–I connectivity.

36 MATERIALS SCIENCE↗