Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Biomass Analytics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Low-Cost Transformation of Biomass-Derived Carbon to High-Performing Nano-graphite via Low-Temperature Electrochemical Graphitization

Graphite, an essential component of energy storage devices, is traditionally synthesized via an energy-intensive thermal process (Acheson process) at ~3300 K. However, the battery performance of such graphite is abysmal under fast-charging conditions, which is deemed essential for the propulsion of electric vehicles to the next level. Herein, a low-temperature electrochemical transformation approach has been demonstrated to afford a highly crystalline nano-graphite with the capability of tuning interlayer spacing to enhance the lithium diffusion kinetics in molten salts at 850 °C. The essence of our strategy lies in the effective electrocatalytic transformation of carbon to graphite at a lower temperature that could significantly increase the energy savings, reduce the cost, shorten the synthesis time, and replace the traditional graphite synthesis. The resulting graphite exhibits high purity, crystallinity, a high degree of graphitization, and a nanoflake architecture that all ensure fast lithium diffusion kinetics (~2.0 × 10 –8 cm2 s –1 ) through its nanosheet. Such unique features enable outstanding electrochemical performance (~200 mA h g –1 at 5C for 1000 cycles, 1C = 372 mA g –1 ) as a fast-charging anode for lithium-ion batteries. Overall, this finding paves the way to make high energy-density fast-charging batteries that could boost electromobility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The Cell Utilized Partitioning Model as a Predictive Tool for Optimizing Counter-Current Chromatography Processes

Counter-current chromatography (CCC) is capable of unique elution modes that isolate analytes using the movement of the stationary phase in addition to moving the mobile phase. These modes include elution-extrusion CCC (EECCC) and dual-mode CCC (DM CCC) that are not possible in traditional solid-liquid chromatography systems. Although EECCC and DM CCC are widely used to recover highly retained components, to our knowledge, optimizing the elution process in these modes with predictive models has not been reported. To address this gap, we developed a predictive model for CCC dubbed the Cell Utilized Partitioning (CUP) model. The CUP model accurately predicts the effluents of multicomponent separations in EECCC and DM CCC modes when compared to experimental data. Furthermore, CUP model simulations were extended to investigate the influence of operating and intrinsic parameters on the yield and productivity, and to compare the separation performances of EECCC and DM CCC in various conditions. The results demonstrate that low distribution constants, usually a KD less than 1, and a selectivity > 1.3, under specific flowrate ranges, increase both productivity and yield. From these results, generalized optimization and scaleup guidelines are proposed that can apply to research settings and to industrial processes to maximize preparative CCC performance.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
DOE OSTI2023

Reduced metal nanocatalysts for selective electrochemical hydrogenation of biomass-derived 5-(hydroxymethyl)furfural to 2,5-bis(hydroxymethyl)furan in ambient conditions

Selective electrochemical hydrogenation (ECH) of biomass-derived unsaturated organic molecules has enormous potential for sustainable chemical production. However, an efficient catalyst is essential to perform an ECH reaction consisting of superior product selectivity and a higher conversion rate. Here, we examined the ECH performance of reduced metal nanostructures, i.e., reduced Ag (rAg) and reduced copper (rCu) prepared via electrochemical or thermal oxidation and electrochemical reduction process, respectively. Surface morphological analysis suggests the formation of nanocoral and entangled nanowire structure formation for rAg and rCu catalysts. rCu exhibits a slight enhancement in ECH reaction performance in comparison to the pristine Cu. However, the rAg exhibits more than two times higher ECH performance without compromising the selectivity for 5-(HydroxyMethyl) Furfural (HMF) to 2,5-bis(HydroxyMethyl)-Furan (BHMF) formation in comparison to the Ag film. Moreover, a similar ECH current density was recorded at a reduced working potential of 220 mV for rAg. This high performance of rAg is attributed to the formation of new catalytically active sites during the Ag oxidation and reduction processes. This study demonstrates that rAg can potentially be used for the ECH process with minimum energy consumption and a higher production rate.

2,5- bis(hydroxymethyl)furan (BHMF)↗
DOE OSTI2023

Synergy of Oxygen Vacancies and Base Sites for Transfer Hydrogenation of Nitroarenes on Ceria Nanorods

CeO 2 nanorod based catalysts for the base-free synthesis of azoxy-aromatics via transfer hydrogenation of nitroarenes with ethanol as hydrogen donor have been synthesized and investigated. The oxygen vacancies (O v ) and base sites are critical for their excellent catalytic properties. The O v , i.e., undercoordinated Ce cations, serve as the sites to activate ethanol and nitroarenes by lowering the energy barrier to transfer hydrogen from α–C sp3 –H in ethanol to the nitro group coupling it to the redox reactions between Ce 3+ and Ce 4+ . At the same time, the base sites catalyze the condensation step to selectively produce azoxy-aromatics. Finally, the catalytic route opens a much improved way to use non-noble metal oxides without additives for the selective functional group reduction and coupling reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Catalytic Graphitization of Biocarbon for Lithium‐Ion Anodes: A Minireview

Abstract The demand for electrochemical energy storage is increasing rapidly due to a combination of decreasing costs in renewable electricity, governmental policies promoting electrification, and a desire by the public to decrease CO 2 emissions. Lithium‐ion batteries are the leading form of electrochemical energy storage for electric vehicles and the electrical grid. Lithium‐ion cell anodes are mostly made of graphite, which is derived from geographically constrained, non‐renewable resources using energy‐intensive and highly polluting processes. Thus, there is a desire to innovate technologies that utilize abundant, affordable, and renewable carbonaceous materials for the sustainable production of graphite anodes under relatively mild process conditions. This review highlights novel attempts to realize the aforementioned benefits through innovative technologies that convert biocarbon resources, including lignocellulose, into high quality graphite for use in lithium‐ion anodes.

25 ENERGY STORAGE↗
DOE OSTI2022

MgO(111) Nanocatalyst for Biomass Conversion: A Study of Carbon Coating Effects on Catalyst Faceting and Performance

Solid base metal oxide catalysts such as MgO offer utility in a wide variety of syntheses from pharmaceuticals to fuels. The (111) facet of MgO shows enhanced, unique properties relative to the other facets. Carbon coatings have emerged as a promising modification to impart metal oxide catalyst stability. Here, we report the synthesis, characterization, and catalytic properties of commercial MgO, MgO(111), and carbon coated derivatives thereof for 2-pentanone condensation. The dimer and trimer products of this reaction can be used as precursors for biofuels upon oxygen removal and thus have relevance in environmental sustainability. Additionally, MgO(111) maintained impressive selectivity towards the dimer product after carbon coating, whereas the other catalysts experienced a decrease in conversion and selectivity as a consequence of the carbon coating. Our findings highlight the catalytic efficacy of MgO(111), provide insight into carbon coating for catalyst stability, and pave the way for continued mechanistic investigations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Toward Rational Design of Supported Vanadia Catalysts of Lignin Conversion to Phenol

In sustainable chemical engineering, catalytic upgrading of lignocellulosic biomass has recently gained attention for producing renewable platform chemicals. To achieve maximal biomass utilization, upgrading the underutilized lignin components is essential. Among various catalysts for lignin upgrading, supported vanadia (V2O5) catalysts are promising because of their cost-effectiveness and tunability of either dopant metals or catalyst supports. Here, computational studies are conducted to derive rational design guidelines of supported V2O5 catalysts for accomplishing the high catalytic activity of lignin upgrading to phenol, a key compound for producing bioplastics and biofuel blendstocks. Guaiacol was used as the model compound since it comprises the highest portion of depolymerized lignin. Computational mechanistic studies for the catalytic guaiacol conversion to phenol were performed for the V2O5 catalysts on Titania (TiO2) and silica (SiO2) to explain higher experimental phenol yields on V2O5/SiO2 than V2O5/TiO2. The hydrogen migration from the methoxy group to the aryl ring was identified as a rate-determining step, and the overall activation energies on the two catalysts were compared. A structural analysis was carried out for the catalysts and rate-determining transition states to gain further insights from mechanistic studies. It was concluded that the tilt angle of the aryl group in the hydrogen migration transition state is a key descriptor determining the catalytic activity of phenol formation. These features correlate well with activation energies and experimental phenol yields, indicating that they provide design guidelines for supported metal catalysts for lignin upgrading before experiments.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
DOE OSTI2021

Optimizing the surface distribution of acid sites for cooperative catalysis in condensation reactions promoted by water

Addition of small amounts of water to the organic solvent may result in different promoting or inhibiting effects in aldol condensation reactions depending on the distribution of active sites on the surface. In a combination of liquid-phase catalytic activity measurements, spectroscopies and theoretical calculations, we have shown that water clusters around the acid site can form bridges with a ketone molecule located close to the activated carbonyl, on another site. When the distance between the two acid sites is greater than a distance corresponding to about 2 water molecules, the efficiency of the bond polarization of the ketone by a remotely located acid site decreases significantly, and the presence of water no longer promotes the reaction. Furthermore, this work provides a quantitative assessment of how solvent molecules can bridge isolated active sites to enable cooperative catalysis, which offers an additional dimension for engineering catalysis at the nanoscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Effect of the ..beta..-Hydroxy Group on Ester Reactivity: Combustion Kinetics of Methyl Hexanoate and Methyl 3-Hydroxyhexanoate

One of the major biofuels used today is biodiesel, composed of fatty acid methyl esters. The fats and oils feedstocks used to make biodiesel are in relatively short supply. To meet increasing global demand, engineered microorganisms have been developed to catalyze conversion of sugar to fatty acid esters that contain unique ..beta..-hydroxy-esters. This study investigated the effect of a hydroxyl group on the combustion characteristics of methyl esters by comparing the chemical behavior of methyl hexanoate (MHx) and methyl 3-hydroxyhexanoate (M3OHHx) - used as surrogates for diesel-boiling-range esters with longer fatty acid chains. The oxidation of these esters was studied experimentally in a flow reactor at 0.84 and 10 bar, 600 to 1,100 K, and stoichiometric conditions; and in a constant volume combustion chamber at 5 and 10 bar, 600 to 900 K, and equivalence ratios of 0.3 and 0.6. MHx was more reactive in the constant volume chamber at temperatures below 800 K at 10 bar and equivalence ratio of 0.6. MHx also exhibited a higher indicated cetane number (16.4) than M3OHHx (8.1). We investigated this reactivity trend using an updated MHx kinetic model and M3OHHx model developed as part of this work. The kinetic models predicted that radicals formed from MHx were consumed by low-temperature chemistry reactions, whereas the M3OHHx reactivity was significantly governed by the ..beta..-radical (on the same carbon as the OH group) chemistry which mainly terminated via the less reactive chain propagation pathway to methyl-3-oxohexanoate + HO2. This study extends our understanding of structural effects on ester reactivity, which will allow for accurate surrogate formulation and performance simulations.

AFIDA↗
DOE OSTI2024

An experimental and chemical kinetic modeling study of 4-butoxyheptane combustion

Here, the combustion kinetics of a novel oxygenated bioblendstock for diesel, 4-butoxyheptane (4-BH), was investigated experimentally using a flow reactor and a heated, high-pressure shock tube. The flow reactor experiments employed oxygen as the oxidizer and helium as the diluent with oxidation conducted at atmospheric pressure and 10 bar for temperatures from 400 to 1000 K at 20-K intervals. The fuel, oxidizer, and diluent flow rates were varied at different temperatures to maintain a constant initial fuel mole fraction of 1000 ppm, with stoichiometric equivalence ratio, and a residence time of 2.0 s. The reacted gas was fed to two separate GC systems that could qualitatively and quantitatively detect product species. Additionally, real fuel-air ignition delay time (IDT) data were collected using a heated, high-pressure shock-tube facility. Fuel lean (φ = 0.5) and stoichiometric (φ = 1.0) mixtures were investigated at 10 atm as well as at 30 atm for the fuel lean case for temperatures between 847 and 1259 K. A detailed chemical kinetics mechanism was developed to model the product distribution from the flow reactor and IDTs from the shock tube. The proposed model was able to predict the double NTC behavior in flow reactor experiments reasonably well. Model predictions at low temperatures were observed to be highly sensitive to the rate constants of ketohydroperoxide (KHP) decomposition in the case of the OOH group in α position which were modeled based on existing literature studies on ethers. It was noted that in the absence of theoretical or experimental studies, the rate constants for KHP decomposition used in the literature were empirically set. Additional studies are required to address the gap in model prediction obtained in this study and to reduce the uncertainty in kinetics models for ether oxidation. Predicted product concentrations and IDTs showed some quantitative agreement with experimental data, but the overall reactivity of the IDTs is underpredicted. Additionally, significant deviation is observed for the IDT results at 10 atm for the stoichiometric case with minor deviations for the other cases. The reaction pathways to the missing products were then further analyzed theoretically through quantum-mechanical calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Selective Ligand Modification of Cobalt Porphyrins for Carbon Dioxide Electrolysis: Generation of a Renewable H2/CO Feedstock for Downstream Catalytic Hydrogenation

Catalytic hydrogenation is an attractive approach to produce green fuels and chemicals. The building blocks for these processes may be effectively produced from renewable power via direct electrochemical reduction of carbon dioxide in an aqueous media. For the first time, the impact of increasing the local proton concentration of cobalt porphyrin was examined by synthesizing new cobalt porphyrins 2, Co(o-OCH3)TPP and cobalt porphyrin 3, Co(o-OH)TPP. Cobalt porphyrins coated on carbon paper converted carbon dioxide and water into a mixture of hydrogen and carbon monoxide in an aqueous electrolyte at near neutral pH. Increasing the local proton availability of the commercial cobalt porphyrin 1, accelerates hydrogen generation under heterogeneous conditions across the range of potentials tested (-0.85 to -1.5 V vs. Ag/AgCl) and demonstrates high Faradaic efficiencies (ca. 90%) at low over-potentials (ca. 540 mV). The culmination of this work can help identify key parameters that facilitate generation of sustainable reagents for catalytic hydrogenation under practical and scalable conditions.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
DOE OSTI2024

The Role of Cu Species in the Regeneration of a Coked Cu/BEA Zeolite Catalyst

Active site occlusion by carbon species, often referred to as coke, is a common deactivation mechanism for heterogeneous catalysts. While it is known that transition metals can lower the temperature required for oxidative coke removal, the roles of ionic species and metal nanoparticles in coke removal are not well understood. This work aims to differentiate how ionic and nanoparticle Cu sites catalyze oxidative regeneration of a coked beta (BEA) zeolite catalyst. This was accomplished by synthesizing catalysts containing exclusively CuOx nanoparticles (NPs) or Cu2+ ions supported on BEA, physically mixing Cu/BEA with a coked BEA catalyst, and monitoring coke removal using in situ spectroscopy. Our results point to an improved combustion activity for CuOx NPs relative to Cu2+ ions, especially in the combustion of graphitic-type coke species. This improved understanding of coke combustion in transition metal containing catalysts informs strategies to improve catalyst regeneration, thereby increasing operational lifetimes.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
DOE OSTI2025

Effects of Water Vapor on the Reactivity of Aluminosilicates in Vapor-Phase Propanal Aldol Condensation

Aluminosilicate materials have been extensively studied as efficient aldol catalysts for C-C coupling reactions due to their acidic nature, high surface area, thermal stability, and porous structure. This work investigated the impact of water vapor pressure on the catalytic reactivity of aluminosilicates for the aldol condensation of propanal to 2-methyl-2-pentenal (MP). The catalytic performance of amorphous SiO2-Al2O3 (A-Si-Al) and aluminated MCM-41 (Al-MCM-41) for the vapor-phase aldol condensation of propanal was evaluated at 200 degrees C as a function of vapor-phase water content at atmospheric pressure. Our findings demonstrate that co-feeding low water vapor pressures (1-18 kPa) with propanal enhances the rates of MP production at 200 degrees C on A-Si-Al. Conversely, water vapor pressures of 25 kPa result in a decrease in aldol dimer formation rates. The rate of MP production evaluated on Al-MCM-41 also increased in the presence of 5 kPa water compared to anhydrous conditions. Propylamine temperature-programmed desorption analyses revealed an increase in Bronsted acid site density when both catalysts were exposed to water, which likely accounts for the observed enhancement in aldol condensation reactivity under hydrous conditions. Reversibility testing of the water vapor effect under reaction conditions, combined with X-ray diffraction analysis of fresh, spent, and regenerated catalysts, revealed no structural changes in either aluminosilicate upon exposure to water or reaction conditions. The rates of aldol condensation and the impact of water vapor were highly consistent across both materials, suggesting that zeolite crystallinity has minimal influence on the catalytic performance.

acid catalysts↗
DOE OSTI2022

Life cycle analysis of polylactic acids from different wet waste feedstocks

Producing a valuable chemical product through diversion of wet wastes can simultaneously resolve the problems associated with increasing wastes and greenhouse gas emissions from conventional chemical production processes. In this work, we investigated the life-cycle greenhouse gas emissions, water, and fossil-fuel consumption for waste-derived polylactic acids (PLA) from three different waste feedstocks, namely wastewater sludge, food waste, and swine manure, using the Greenhouse Gases, Regulated Emissions, and Energy Use in Technologies (GREET) model. The decarbonization potential of replacing fossil-based resins with the waste-derived polymer was also investigated. The results show that swine manure-to-PLA pathway was the least carbon intensive (—1.4 kgCO 2 e/kg) among the three waste-to-PLA pathways on a cradle-to-grave basis, followed by the food waste case (—1.3 kgCO 2 e/kg) and then by the wastewater sludge case (0.6 kgCO 2 e/kg). In the baseline scenario, all three waste-to-PLA pathways were less carbon intensive than both fossil-based PET and HDPE on a cradle-to-grave basis: 66% (vs. PET) and 56% (vs. HDPE), 171 and 192%, 181 and 205% reduction in GHG emissions for wastewater sludge-, food waste-, and swine manure-to-PLA pathway, respectively. For all sensitivity cases investigated, the food waste- and swine manure-to-PLA pathways were significantly less carbon intensive than their fossil-counterparts. In terms of the annual decarbonization potential of replacing fossil-based PET or HDPE, the wastewater sludge- and food waste-pathway showed higher mitigation potential than the swine manure-pathway: i) 18–28 kilotons CO 2 e-reduction per year for wastewater sludge pathway; ii) 23–26 kTCO 2 e-reduction/yr for food waste pathway; and iii) about 5 kTCO 2 e-reduction/yr for swine manure pathway depending on the type of conventional resin replaced. However, given the abundant availability of the swine manure feedstocks across the United States, the decarbonization potential of swine manure-based pathway can also increase as the plant capacity or the number of plants grow.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Frictional Contacts Between Individual Woody Biomass Particles under Wet and Dry Conditions

Friction between wood particles can be a critical property when designing processing equipment for creating cellulosic biofuels and similar natural products. Also, as wood processing is likely to occur year-round, understanding the friction between wet as well as dry wood particles can help design and model equipment, such as screw feeders. Here, a tribo-rheometry method was developed using a commercial rheometer that measured the torque required to rotate two contacting millimeter-scale wood chip particles. First, a range of normal forces were used to find the limits of the experimental method. Torque values were measured for seven pairs of wood chip particles at 1 N normal force under both dry and wet conditions, at both ambient conditions and in a humidity-controlled chamber. The torque required to rotate the wet particles was consistently higher than that of the dry particles, although differences were not quite statistically significant when measurements were performed at ambient conditions. Using humidity control resulted in torque values for wet particles of 1900 uNm and 900 uNm for dry particles. Finally, the friction coefficient was calculated as 0.23 for wet particles and 0.11 for dry particles when humidity was controlled. These frictions coefficients agreed with values for wood reported in the literature. Overall, controlling humidity is strongly recommended to quantify the range of friction for particles that uptake water, including granular systems from biomass to food to powders.

biomass↗
DOE OSTI2022

Energy-Efficient Microbial Electrochemical Lignin and Alkaline Hydroxide Recovery from DMR Black Liquor

Black liquor is a complex waste stream generated from the fast-expanding biorefinery industry, and the high management cost has been known as a major development barrier. In this work, we demonstrated a rationally designed 4-chamber microbial electrolysis process that was capable of recovering the value-added lignin, NaOH, and H2 products while removing waste organics from the Deacetylation and Mechanical Refining (DMR) black liquor, which could potentially reduce the disposal cost by up to 40%. The lab-scale MEC achieved 52% organic removal from a highly concentrated feedstock (28,960 ± 212 mg/L COD) and recovered 83.2 mM NaOH under a small voltage application (1.2 V). Lignin recovery was observed to be as high as 13.98 +/- 0.28 g/L, and 0.35 L/L/day H2 was produced with a faradaic efficiency of 93.5%. This work provided a good example on how complex liquid waste stream can be valorized via multi-functional microbial electrochemical technology, and how the traditionally unfavored pH gradient in an electrochemical reactor can be manipulated for lignin precipitation and alkaline recovery at the same time. The versatility and good performance in concurrent contaminants removal, lignin precipitation, H2 production and NaOH recovery demonstrate a good potential for microbial electrolysis in black liquor treatment.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗