SEARCH · Engineering Papers

Results for “BOUNDARY CONDITIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

DOE OSTI2012

Research of a boundary condition quantifiable correction method in the assembly homogenization

The methods and codes currently used in assembly homogenization calculation mostly adopt the reflection boundary conditions. The influences of real boundary conditions on the assembly homogenized parameters were analyzed. They were summarized into four quantifiable effects, and then the mathematical expressions could be got by linearization hypothesis. Through the calculation of a test model, it had been found that the result was close to transport calculation result when considering four boundary quantifiable effects. This method would greatly improve the precision of a core design code which using the assembly homogenization methods, but without much increase of the computing time. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

NASA NTRS1988

Accurate boundary conditions for exterior problems in gas dynamics

The numerical solution of exterior problems is typically accomplished by introducing an artificial, far field boundary and solving the equations on a truncated domain. For hyperbolic systems, boundary conditions at this boundary are often derived by imposing a principle of no reflection. However, waves with spherical symmetry in gas dynamics satisfy equations where incoming and outgoing Riemann variables are coupled. This suggests that natural reflections may be important. A reflecting boundary condition is proposed based on an asymptotic solution of the far field equations. Nonlinear energy estimates are obtained for the truncated problem and numerical experiments presented to validate the theory.

Hagstrom, Thomas↗

DOE OSTI2020

Effect of boundary conditions on fluctuations of the Bose condensate of interacting atoms

For a gas of trapped interacting atoms forming a Bose condensate, we demonstrate a possibility of a significant influence of the boundary conditions on the statistics of the number of particles in the fundamental mode of the system. The analysis is carried out in the Bogoliubov – Popov low-temperature approximation for model homogeneous cubic traps with periodic or combined periodic and zero boundary conditions. It is shown that the effect of the boundary conditions does not weaken even in the region of parameters corresponding to the relatively strong interaction in the Thomas – Fermi asymptotic case, and does not disappear when proceeding to the thermodynamic limit. (paper)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRSDate not supplied

Effect of Boundary Conditions on Process-Induced Stresses in a Plain Weave Unit Cell

Woven polymer matrix composites (PMCs) are leveraged in aerospace applications for their desirable specific properties, yet they are vulnerable to high residual stresses during manufacturing and their complex geometry makes experimental results difficult to observe. Process modeling is needed to characterize the effects of the curing and predict end stress states. Finite element software can be used to model woven architectures, however accurate representation of processing conditions remains a challenge when it comes to selecting boundary conditions. The effect of BCs on process-induced stress within woven PMCs is studied. The commercial Finite Element Analysis (FEA) software Abaqus is coupled with user-written subroutines in a process modeling framework. A two-dimensionally (2D) woven PMC repeating unit cell (RUC) is modeled with TexGen and Abaqus. Virtual curing is imposed on the bulk matrix. The BC study is conducted with Free, Periodic, Flat, and Flat-Free configurations. Results show that the end stress state is sensitive to the boundary condition assumptions. Flat BC results show great agreement with Periodic BCs. Residual stress results from process modeling are then compared with a linear-elastic thermal cooldown analysis in Abaqus. Cooldown results indicate an overestimation in matrix stresses compared with process modeling.

micromechanics↗

DOE OSTI2015

Variance reduction through robust design of boundary conditions for stochastic hyperbolic systems of equations

We consider a hyperbolic system with uncertainty in the boundary and initial data. Our aim is to show that different boundary conditions give different convergence rates of the variance of the solution. This means that we can with the same knowledge of data get a more or less accurate description of the uncertainty in the solution. A variety of boundary conditions are compared and both analytical and numerical estimates of the variance of the solution are presented. As an application, we study the effect of this technique on Maxwell's equations as well as on a subsonic outflow boundary for the Euler equations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2023

Dirichlet-type absorbing boundary conditions for peridynamic scalar waves in two-dimensional viscous media

Construction of absorbing boundary conditions (ABCs) for nonlocal models is generally challenging, primarily due to the fact that nonlocal operators are commonly associated with volume constrained boundary conditions. Moreover, application of Fourier and Laplace transforms, which are essential for the majority of available methods for ABCs, to nonlocal models is complicated. In this paper, we propose a simple method to construct accurate ABCs for peridynamic scalar wave-type problems in viscous media. The proposed ABCs are constructed in the time and space domains and are of Dirichlet type. Consequently, their implementation is relatively simple, since no derivatives of the wave field are required. The proposed ABCs are derived at the continuum level, from a semi-analytical solution of the exterior domain using harmonic exponential basis functions in space and time (plane-wave modes). The numerical implementation is done using a meshfree collocation approach employed within a boundary layer adjacent to the interior domain boundary. The modes satisfy the peridynamic numerical dispersion relation, resulting in a compatible solution of the interior region (near-field) with that of the exterior region (far-field). The accuracy and stability of the proposed ABCs are demonstrated with several numerical examples in two-dimensional unbounded domains.

42 ENGINEERING↗

NASA NTRS1988

Accurate boundary conditions for exterior problems in gas dynamics

The numerical solution of exterior problems is typically accomplished by introducing an artificial, far-field boundary and solving the equations on a truncated domain. For hyperbolic systems, boundary conditions at this boundary are often derived by imposing a principle of no reflection. However, waves with spherical symmetry in gas dynamics satisfy equations where incoming and outgoing Riemann variables are coupled. This suggests that natural reflections may be important. A reflecting boundary condition is proposed based on an asymptotic solution of the far-field equations. Nonlinear energy estimates are obtained for the truncated problem and numerical experiments presented to validate the theory.

Hagstrom, Thomas↗

NASA NTRS2001

A Boundary Condition for Simulation of Flow Over Porous Surfaces

A new boundary condition is presented.for simulating the flow over passively porous surfaces. The model builds on the prior work of R.H. Bush to eliminate the need for constructing grid within an underlying plenum, thereby simplifying the numerical modeling of passively porous flow control systems and reducing computation cost. Code experts.for two structured-grid.flow solvers, TLNS3D and CFL3D. and one unstructured solver, USM3Dns, collaborated with an experimental porosity expert to develop the model and implement it into their respective codes. Results presented,for the three codes on a slender forebody with circumferential porosity and a wing with leading-edge porosity demonstrate a good agreement with experimental data and a remarkable ability to predict the aggregate aerodynamic effects of surface porosity with a simple boundary condition.

Frink, Neal T.↗

NASA NTRS1972

The effects of boundary condition asymmetries on the interplanetary magnetic field-moon interaction.

Boundary condition asymmetries inherent in the solar wind flow past the moon are included in a cylindrical model of the interplanetary magnetic field-moon interaction. Numerical examinations of the sunward side response of this model are compared in the frequency domain with those of symmetrically excited spherical and cylindrical models and two characteristic differences are observed: the response of the asymmetric model is depressed at low frequencies due to magnetic diffusion around a conducting core, and is flattened at high frequencies because of the finite application time of the incident interplanetary magnetic field. The diffusion of field lines around the core is also evident in the time response of the model in the antisolar cavity. The above features of the lunar response resulting from boundary condition asymmetries are shown to be evident in observational measurements.

Reisz, A. C.↗

DOE OSTI2022

Improved Boundary Conditions for Coupled Geospace Models: An Application in Modeling Spacecraft Surface Charging Environment

Abstract Spacecraft surface charging in the inner magnetosphere often occurs in the pre‐midnight to the dawn sector when electron fluxes of tens of keV increase. Inner magnetosphere ring current models can be used to simulate/predict the spacecraft surface charging environment, with their outer boundary conditions specified either based on observations or provided by other models, such as MHD models. In the latter approach, using MHD quantities, the flux spectrum at the outer boundary is commonly assumed to follow a Kappa or Maxwellian distribution function. Such a method however often departs greatly from the realistic spectrum at E < tens of keV, a crucial energy range in the surface charging anomaly. In order to achieve a better representation of the surface charging environment, we propose to combine the MHD‐parameterized flux spectrum with an empirical electron flux model of E < 40 keV to set the electron flux boundary condition. Results indicate that as opposed to the case where the MHD‐parameterized flux distribution is solely used at the model boundary, simulations with the new boundary condition yields a more intense surface charging environment. The integrated electron flux between 10 < E < 50 keV, a measure of the severity of the surface charging environment, is significantly enhanced by 1‐2 orders of magnitude, leading to a much better agreement with Van Allen Probes measurements. This study hence demonstrates a reasonable solution to the setting of outer boundary conditions for inner magnetosphere models and is recommended for coupled geospace circulation models.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1981

A comparative study of nonreflecting far-field boundary condition procedures for unsteady transonic flow computation

Various nonreflecting far-field boundary condition procedures are compared by implementing them in the computer code LTRAN2. This code solves the implicit finite-difference representation of the small-disturbance equations for transonic flows about airfoils. The first- and second-approximate nonreflecting conditions, as proposed by Engquist and Majda, are compared with the condition derived from the full-characteristic equation. The far-field boundary conditions and the description of the algorithm for implementing these conditions in LTRAN2 are discussed. Various cases are computed and compared with results from the older, more conventional procedures. One concludes that the full-characteristic equation produces the most effective results, thus allowing the far-field boundary to be located closer to the airfoil; this decreases the computer time required to obtain the solution because fewer mesh points are required.

Kwak, D.↗

DOE OSTI2021

Boundary conditions manipulation of polar vortex domains in BiFeO 3 membranes via phase-field simulations

Polar vortex domains have recently become an emergent research field due to the abundant physical phenomena and potential applications in high-density memories. Here, we explore the mechanisms of creating polar vortex domains in the BiFeO3 (BFO) membranes subjected to different boundary conditions using phase-field simulations. A major difference is that the vortex in membrane can be stabilized even under short-circuit electrical boundary conditions compared to vortex in other systems, such as thin film or superlattice. We found that (a) the formation of polar vortex domains at the membrane interior under bending is mainly driven by the reduction of elastic energy under short-circuit boundary condition, and the vortex chirality (namely, clockwise and counterclockwise) could be identified by n-shape and u-shape bending; (b) in the unbent open-circuit BFO membrane case, exotic trapezoid-shaped vortex nanodomains form at the terminations of 109 degrees domain walls (DWs) and partially charged 71 degrees DWs, which is driven by the local depolarization field and the interplay among electrostatic, elastic, and gradient and Landau energies. We also examine Kittel's law by establishing the dependence of vortex periods on the membrane thickness. Furthermore, these results give further understanding of the effect of boundary conditions on the formation of polar vortex domains, guiding experimental designs of vortex-based high-density memories.

36 MATERIALS SCIENCE↗

DOE OSTI2019

Boundary conditions and Berry phase in magnetic nanostructures

The effect of micromagnetic boundary conditions on the Berry curvature and topological Hall effect in granular nanostructures is investigated by model calculations. Both free surfaces and grain boundaries between interacting particles or grains affect the spin structure. The Dzyaloshinskii-Moriya interactions yield corrections to the Erdmann-Weierstrass boundary conditions, but the Berry curvature remains an exclusive functional of the local spin structure, which greatly simplifies the treatment of nanostructures. An explicit example is a model nanostructure with cylindrical symmetry whose spin structure is described by Bessel function and which yields a mean-field-type Hall-effect contribution that can be related to magnetic-force-microscopy images.

36 MATERIALS SCIENCE↗

NASA NTRS2001

Global Discrete Artificial Boundary Conditions for Time-Dependent Wave Propagation

We construct global artificial boundary conditions (ABCs) for the numerical simulation of wave processes on unbounded domains using a special non-deteriorating algorithm that has been developed previously for the long-term computation of wave-radiation solutions. The ABCs are obtained directly for the discrete formulation of the problem; in so doing, neither a rational approximation of 'non-reflecting kernels,' nor discretization of the continuous boundary conditions is required. The extent of temporal nonlocality of the new ABCs appears fixed and limited; in addition, the ABCs can handle artificial boundaries of irregular shape on regular grids with no fitting/adaptation needed and no accuracy loss induced. The non-deteriorating algorithm, which is the core of the new ABCs is inherently three-dimensional, it guarantees temporally uniform grid convergence of the solution driven by a continuously operating source on arbitrarily long time intervals, and provides unimprovable linear computational complexity with respect to the grid dimension. The algorithm is based on the presence of lacunae, i.e., aft fronts of the waves, in wave-type solutions in odd-dimension spaces, It can, in fact, be built as a modification on top of any consistent and stable finite-difference scheme, making its grid convergence uniform in time and at the same time keeping the rate of convergence the same as that of the non-modified scheme. In the paper, we delineate the construction of the global lacunae-based ABCs in the framework of a discretized wave equation. The ABCs are obtained for the most general formulation of the problem that involves radiation of waves by moving sources (e.g., radiation of acoustic waves by a maneuvering aircraft). We also present systematic numerical results that corroborate the theoretical design properties of the ABCs' algorithm.

Ryabenkii, V. S.↗

DOE OSTI2014

Ion boundary conditions in semi-infinite fluid models of electron beam-plasma interaction

The modified Bohm criterion is derived for the plasma consisting of the monoenergetic electron beam and thermal electrons. This criterion allows us to define the accurate ion boundary conditions for semi-infinite collisionless fluid models of electron beam–plasma interaction. In the absence of electron beam, these boundary conditions give the classical sheath parameters. When the monoenergetic electron beam propagates through the plasma, the fluid model with proposed boundary conditions gives the results, which are in qualitative agreement with the results obtained earlier in M. Sharifian and B. Shokri, Phys. Plasmas 14, 093503 (2007). However, dynamics and parameters of the plasma sheath are different.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1980

Radiation boundary conditions for wave-like equations

In the numerical computation of hyperbolic equations it is not practical to use infinite domains; instead, the domain is truncated with an artificial boundary. In the present study, a sequence of radiating boundary conditions is constructed for wave-like equations. It is proved that as the artificial boundary is moved to infinity the solution approaches the solution of the infinite domain as O(r exp -m-1/2) for the m-th boundary condition. Numerical experiments with problems in jet acoustics verify the practical nature of the boundary conditions.

Bayliss, A.↗

NASA NTRS2009

Investigation of Boundary Conditions for Flexible Multibody Spacecraft Dynamics

In support of both the Space Shuttle and International Space Station programs, a set of generic multibody dynamics algorithms integrated within the Trick simulation environment have addressed the variety of on-orbit manipulator simulation requirements for engineering analysis, procedures development and crew familiarization/training at the NASA Johnson Space Center (JSC). Enhancements to these dynamics algorithms are now being driven by a new set of Constellation program requirements for flexible multibody spacecraft simulation. One particular issue that has been discussed within the NASA community is the assumption of cantilever-type flexible body boundary conditions. This assumption has been commonly utilized within manipulator multibody dynamics formulations as it simplifies the computation of relative motion for articulated flexible topologies. Moreover, its use for modeling of space-based manipulators such as the Shuttle Remote Manipulator System (SRMS) and Space Station Remote Manipulator System (SSRMS) has been extensively validated against flight data. For more general flexible spacecraft applications, however, the assumption of cantilever-type boundary conditions may not be sufficient. This paper describes the boundary condition assumptions that were used in the original formulation, demonstrates that this formulation can be augmented to accommodate systems in which the assumption of cantilever boundary conditions no longer applies, and verifies the approach through comparison with an independent model previously validated against experimental hardware test data from a spacecraft flexible dynamics emulator.

Boundary-value problems↗

NASA NTRS1992

Critical effects of downstream boundary conditions on vortex breakdown

The unsteady, compressible, full Navier-Stokes (NS) equations are used to study the critical effects of the downstream boundary conditions on the supersonic vortex breakdown. The present study is applied to two supersonic vortex breakdown cases. In the first case, quasi-axisymmetric supersonic swirling flow is considered in a configured circular duct, and in the second case, quasi-axisymmetric supersonic swirling jet, that is issued from a nozzle into a supersonic jet of lower Mach number, is considered. For the configured duct flow, four different types of downstream boundary conditions are used, and for the swirling jet flow from the nozzle, two types of downstream boundary conditions are used. The solutions are time accurate which are obtained using an implicit, upwind, flux-difference splitting, finite-volume scheme.

Kandil, Osama↗