Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Entanglement wedge reconstruction and the information paradox

When absorbing boundary conditions are used to evaporate a black hole in AdS/CFT, we show that there is a phase transition in the location of the quantum Ryu-Takayanagi surface, at precisely the Page time. The new RT surface lies slightly inside the event horizon, at an infalling time approximately the scrambling time β/2 π logS BH into the past. We can immediately derive the Page curve, using the Ryu-Takayanagi formula, and the Hayden-Preskill decoding criterion, using entanglement wedge reconstruction. Because part of the interior is now encoded in the early Hawking radiation, the decreasing entanglement entropy of the black hole is exactly consistent with the semiclassical bulk entanglement of the late-time Hawking modes, despite the absence of a firewall.By studying the entanglement wedge of highly mixed states, we can understand the state dependence of the interior reconstructions. A crucial role is played by the existence of tiny, non-perturbative errors in entanglement wedge reconstruction. Directly after the Page time, interior operators can only be reconstructed from the Hawking radiation if the initial state of the black hole is known. As the black hole continues to evaporate, reconstructions become possible that simultaneously work for a large class of initial states. Using similar techniques, we generalise Hayden-Preskill to show how the amount of Hawking radiation required to reconstruct a large diary, thrown into the black hole, depends on both the energy and the entropy of the diary. Finally we argue that, before the evaporation begins, a single, state-independent interior reconstruction exists for any code space of microstates with entropy strictly less than the Bekenstein-Hawking entropy, and show that this is sufficient state dependence to avoid the AMPSS typical-state firewall paradox.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A mutagenic analysis of NahE, a hydratase-aldolase in the naphthalene degradative pathway

NahE is a hydratase-aldolase that converts o-substituted trans-benzylidenepyruvates (H, OH, or CO 2 - ) to benzaldehyde, salicylaldehyde, or 2-carboxybenzaldehyde, respectively, and pyruvate. The enzyme is in a bacterial degradative pathway for naphthalene, which is a toxic and persistent environmental contaminant. Sequence, crystallographic, and mutagenic analysis identified the enzyme as a member of the N-acetylneuraminate lyase (NAL) subgroup in the aldolase superfamily. As such, it has a conserved lysine (Lys183) and tyrosine (Tyr155), for Schiff base formation, as well as a GXXGE motif for binding of the pyruvoyl carboxylate group. A crystal structure of the selenomethionine derivative of NahE shows these active site elements along with nearby residues that might be involved in the mechanism and/or specificity. Mutations of five active site amino acids (Thr65, Trp128, Tyr155, Asn157, and Asn281) were constructed and kinetic parameters measured in order to assess the effect(s) on catalysis. Here, the results show that the two Trp128 mutants (Phe and Tyr) have the least effect on catalysis, whereas amino acids with bulky side chains at Thr65 (Val) and Asn281 (Leu) have the greatest effect. Changing Tyr155 to Phe and Asn157 to Ala also hinders catalysis, and the effects fall in between these extremes. These observations are put into a structural context using a crystal structure of the Schiff base of the reaction intermediate. Trapping experiments with substrate, Na(CN)BH 3 , and wild type enzyme and selected mutants mostly paralleled the kinetic analysis, and identified two salicylaldehyde-modified lysines: the active site lysine (Lys183) and one outside the active site (Lys279). The latter could be responsible for the observed inhibition of NahE by salicylaldehyde. Together, the results provide new insights into the NahE-catalyzed reaction.

59 BASIC BIOLOGICAL SCIENCES↗

Material extrusion with integrated compression molding of NdFeB/SmFeN nylon bonded magnets using small- and large-scale pellet-based 3D-printers

High-density bonded rare-earth magnets are manufactured using pellet-fed additive manufacturing (AM)/material extrusion and an integrated additive manufacturing-compression molding (AM-CM) process. Neodymium iron boron – samarium iron nitride in polyamide 12 (NdFeB-SmFeN/PA12) of 93 % weight fraction (65 % volume fraction) are used for the study. The mechanical properties (tensile strength and modulus), magnetic properties (maximum energy density, coercivity, remanence) are reported. Manufacturing parameters such as layer height, barrel temperatures, screw speed and gantry feed rate are optimized to obtain the highest possible density of the magnets using a small-scale desktop material extrusion printer. Large scale integrated additive manufacturing-compression molding (AM-CM) is then utilized to increase the density of the magnets by reducing porosity defects common in the material extrusion process. The density of as-printed magnets was 5.2 g/cm 3 with a BH max value of 124.14 kJ/m 3 , tensile strength of 20 MPa and a modulus of 2 GPa. AM-CM increased the density of the compound by 5.5 % (5.49 g/cm 3 ). The reduction in porosity was confirmed using X-ray tomography (XCT). Improvement in mechanical strength of the material was also observed, with an increase in tensile strength of 25 % (25.09 MPa) and increase in tensile modulus of 275 % (5.49 GPa). Scanning electron microscopy showed increased particle-matrix adhesion with the integrated AM-CM process.

36 MATERIALS SCIENCE↗

Correlations between emission events in Rainbow Gravity

Highlights: • It is studied emission correlations between particle emission events in black holes. • Particles emitted have highly correlated moments before the BH stops radiating. • Rainbow Gravity allows maintaining the rest of it stored in its remnant. In this work, we study emission correlations in Rainbow Gravity (RG) black holes known to have black hole remnants. Non-thermal corrections are responsible for generating non-zero correlations between particle emission events during the black hole evaporation process. With this in mind, we calculate the temperatures considering back-reaction effects. Then, we obtain the correlations between emission events for a RG metric proposed by Magueijo and Smolin. We also discuss through a numerical analysis the emission correlations behavior in the last stages of evaporation of the black hole.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The influence of LiH and TiH 2 on hydrogen storage in MgB 2 II. XPS study of surface and near-surface phenomena

We report that Mg(BH 4 ) 2 is a promising solid-state hydrogen storage material, releasing 14.9 wt% hydrogen upon conversion to MgB 2 . The rehydrogenation of MgB 2 is particularly challenging, requiring prolonged exposure to high pressures of hydrogen at high temperature. Here we report an XPS study probing the influence of LiH and TiH 2 on the hydrogen storage properties of MgB 2 in the surface and near-surface regions, as a complementary investigation to a preceding study of the bulk properties. Surface and near-surface properties are important considerations for nanoscale and bulk hydrogen storage materials. If there are reactions occurring at the surface that modify the chemical composition in the near-surface region, species diffusion can alter the chemical composition even deep into the bulk of the material. For LiH/MgB 2 , metastable LiH–B and LiH–Mg species are produced that are more reactive than Bulk MgB 2 . With prolonged glovebox storage, the LiH/MgB 2 material shows increased reactivity towards O and C and enriched levels of Li and B in the near-surface region. In addition, Li induces the growth of Li 2 CO 3 in the surface and near surface regions. Exposing LiH/MgB 2 to hydrogen at 700 bar and 280 °C for 24 h produces borohydride at a temperature 100 °C below the threshold for bulk MgB 2 hydrogenation. In a specifically surface process with macroscopic implications, the hydrogenation conditions also cause Li 2 CO 3 to react with boron hydroxide in the sample to form a Li-deficient glassy lithium borate melt at the interfaces of the particles, bonding them together. Subsequent heating to 380 °C dehydrogenates the borohydride and eliminates the Li-deficient glassy lithium borate. The LiH/MgB 2 material is not reversible because desorption does not lead back to LiH/MgB 2 , but rather to elemental B and Mg metal in the near-surface region. In contrast to LiH, TiH 2 does not react with MgB 2 , despite the favorable thermodynamics for destabilization via TiB 2 formation. Furthermore, high pressure hydrogenation yields only unreacted TiH 2 and MgB 2 in the surface and near-surface regions. Thus, added TiH 2 provides no benefit to MgB 2 hydrogenation, in agreement with the findings of the preceding bulk study.

08 HYDROGEN↗

Mechanically strengthened heterogeneous Sm-Co sintered magnets

Samarium-cobalt sintered magnets offer excellent magnetic properties, thermal stability, and corrosion resistance. They are used in a variety of defense and civilian applications, especially when elevated operation temperatures (e.g., 200 ºC to 550 ºC) are required. However, the utilization of these materials is restricted by their brittleness. Improving their mechanical resilience would make them more cost-effective, efficient, and robust in decarbonization and other function-related applications while reducing the pressure on critical material supply chains. In this paper, we engineer a series of novel heterogeneous microstructures, such as laminated coarse grain (CG)/fine grain (FG) and core/shell CG/FG microstructures, to produce unprecedented combinations of superior mechanical and magnetic properties without altering the chemical compositions of the magnets or common heat treatment procedures. Further, a 60% flexural strength enhancement is obtained using heterogeneous Sm 2 (CoFeCuZr) 17 sintered magnets with little impact on their magnetic properties. The mechanically robust heterogeneous Sm-Co sintered magnets have a minor (e.g., less than 4.6%) reduction in the energy product (BH) max due to a slightly reduced squareness of the demagnetization curve, with no decrease in either the remanence (B r ) or the intrinsic coercivity (H ci ). The flexural strengths of these heterogeneous Sm-Co magnets depend on the volume ratios and mean grain sizes of the FG/CG regions, as well as their microstructural architectures. The fine-grained regions act as mechanical strengthening sites, which can be strategically used when designing the magnet for different applications. This technology is highly compatible with existing magnet manufacturing processes and thus can be adopted readily by the magnet industry.

36 MATERIALS SCIENCE↗

Microstructure refinement of hot deformed Dy-free NdFeB magnets through a novel cold sintering approach by pressure-assisted spark plasma sintering

Anisotropic fine-grained Dy-free NdFeB high-performance magnets were produced using a novel cold sintering approach by pressure-assisted spark plasma sintering (SPS). The NdFeB nanocrystalline ribbon powders were subjected to cold sintering below 450 °C using pressure-assisted SPS, followed by hot deformation at 710 °C and 810 °C via SPS. Results indicate that cold sintering below 450 °C effectively restricts grain growth in the NdFeB magnets, yielding sub-100 nm scale grains across both fine-grained regions and most coarse-grained regions. The refined grain structure achieved through cold sintering allows for a lower hot deformation temperature as compared with the magnet by conventional sintering, as finer grains allow easier deformation and grain sliding/rotation. This process produces a highly fine-grained and anisotropic microstructure to achieve high magnetic performance (i.e., high intrinsic coercivity, remanence, and maximum energy product) in the magnets. The cold sintering (at 350 °C) and lower hot deformation temperatures required (e.g., 710 °C) help control grain coarsening and limit grain size that is commensurate with the size of a single magnetic domain of the Nd 2 Fe 14 B magnetic matrix phase, resulting in high intrinsic coercivity (H ci =11.4 kOe). Furthermore, the reduced hot deformation temperature mitigates the formation of coarse grain bands, leading to improved magnetic properties, specifically an increased remanence (B r = 14.3 kGs) and a high maximum energy product ((BH) max = 48 MGOe). In conclusion, cold sintered hot deformed NdFeB magnet also shows good thermal stability with reversible temperature coefficient α(B r )= -0.097 %/K and α(H ci )= -0.616 %/K at elevated temperatures up to 400 K.

Cold Sintering↗

Magnetic and mechanical properties of grain-refined Dy-free Nd-Fe-B sintered magnets

In this work, the effects of grain size on magnetic and mechanical properties of Dy-free Nd-Fe-B sintered magnets were studied. The grain size of the sintered magnets was varied by using different sized Dy-free Nd-Fe-B alloy feedstock powders which were ball milled to different extents. Increasing the ball milling time from 7 to 11 h caused the average particle size of the powders to decrease from 3.6 to 2.1 µm, while the average grain size of the corresponding sintered magnets decreased from 5.0 to 4.0 µm. The intrinsic coercivity Hcj and maximum energy product (BH) max of these magnets increased from 11.6 to 13.7 kOe and 41.6 to 43.6 MGOe, respectively. The finer grain magnets exhibited better thermal stability, as indicated by a smaller temperature coefficient of H cj (-0.71%/°C). With extending ball milling time to 15 h, the magnetic properties of the magnets deteriorate, while the flexural strengths first decrease and then increase. The flexural strength improvement is attributed to the increased Oxygen content in the magnets due to finer grains. The coercivity enhancement by reduction of grain size is a promising approach to develop Dy-free Nd-Fe-B sintered magnets with better thermal stability. It is important to control the Oxygen contents in the magnets to compromise both magnetic and mechanical properties.

36 MATERIALS SCIENCE↗

Engineering microstructure to improve coercivity of bulk MnBi magnet

MnBi is a candidate material for high-temperature magnets because of its increasing coercivity with increasing temperatures up to 255 °C. However, most efforts in fabricating bulk MnBi magnets have run into the problem of preserving the coercivity (H cj) of its feedstock powders. About 70% of powder’s H cj would be lost during the densification process. Our micromagnetic modeling shows that the coercivity mechanism of the MnBi bulk magnet is controlled by nucleation of the reversal magnetization domains, and the large H cj loss that occurred during the powder consolidation process can be attributed to the inter-grain magnetic coupling. To attain a high H cj , the grains in the MnBi bulk magnet must be separated with a non-magnetic grain boundary phase (GBP). To validate this GBP hypothesis, we engineered MnBi bulk magnets with two different types of GBP. The first type of GBP was created in-situ by precipitating excessive Bi from the grains; the second type was created ex-situ by coating silicates on the feedstock powders before the consolidation. While both GBP work, the ex-situ approach resulted in a better H cj due to a more uniform GBP distribution. We report the H cj loss was reduced from 70% to 15%, and the (BH)max of a warm sintered bulk magnet reached 8.9 MGOe.

36 MATERIALS SCIENCE↗

Compression molding of anisotropic NdFeB bonded magnets in a polycarbonate matrix

Anisotropic bonded Nd 2 Fe 14 B (NdFeB) magnets in a polycarbonate (PC) binder matrix are fabricated using a compression molding process. The weight fractions (w.f.) of NdFeB in PC on the batch mixer are 20, 50, 75, 85 and 95% compared to the twin screw extruder with 20, 50 and 75% respectively. The density of the 95% batch mixed magnets fabricated was 5.34 g/cm 3 and the magnetic properties are, intrinsic coercivity H ci = 942.99 kA/m, remanence B r = 0.86 T, and energy product (BH) max = 120.96 kJ/m 3 . Furthermore, the measured tensile properties are in the range of 27-59 MPa, comparable to that of polyamide (PA), polyphenylene sulfide (PPS) bonded magnets and demonstrating potential for bonded magnet applications. Scanning electron microscopy showed that the onset of failure occurs in the magnetic particle- matrix interface. This study demonstrates that compression additive molding technique can be used to fabricate high performance NdFeB polycarbonate composite magnets with improved mechanical properties.

36 MATERIALS SCIENCE↗

f-Element complexes with benzyl and cyclohexyl substituted trihydroborates

Actinide complexes containing the simplest borohydrides (BH 4 ) 1- and (MeBH 3 ) 1- can exhibit remarkably highly volatility, which creates unique hazards and handling challenges, especially when making measurements on solid samples under vacuum. Here we describe efforts to prepare new actinide borohydride complexes with attenuated volatility by adding bulkier benzyl (Bn) and cyclohexyl (Cy) substituents to boron. Reactions of ThCl 4 , UI 3 (thf) 4 , and NdI 3 with the mixed alkali metal salt Li/K(BnBH 3 )(thf) n yielded Th(BnBH 3 ) 4 (thf) 2 , U(BnBH 3 ) 4 (thf) 2 , and K[Nd(BnBH 3 ) 4 ], respectively. Notable amongst these, the reaction with UI 3 (thf) 4 proceeds via oxidation of U(III) to U(IV) despite the presence of reducing borohydride ligands. Similarly, reactions of the same metal halides with four equivalents of Li(CyBH 3 )(Et 2 O) n yielded Th(CyBH 3 ) 4 , U(CyBH 3 ) 4 (thf) 2 , and [Li(Et 2 O) 3 ][Nd(CyBH 3 ) 4 ]. Single crystal X-ray diffraction studies of the M(BnBH 3 ) 4 (thf) 2 complexes with M = Th and U confirmed their formulations. Furthermore, the complexes have approximate D 2d point group symmetry and adopt bicapped hexagonal antiprismatic coordination geometries with axial thf ligands and κ 3 -BnBH 3 ligands bound in the equatorial plane. K[Nd(BnBH 3 ) 4 ] and [Li(Et 2 O) 3 ][Nd(CyBH 3 ) 4 ], which were prepared for comparison to U(III) complexes that were unsuccessfully targeted, were also structurally characterized to reveal complex anions with tetrahedral arrangements of trihydroborate ligands bound to Nd(III). Crystals obtained for Th(CyBH 3 ) 4 and U(CyBH 3 ) 4 (thf) 2 were not suitable for XRD studies, but 1 H and 11 B NMR spectra were consistent with their formulations. Collectively, these complexes represent rare examples of structurally characterized f-element trihydroborate complexes with carbon substituents other than methyl.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Discovery of the most luminous quasar of the last 9 Gyr

Abstract We report the discovery of a bright ( $g = 14.5$ mag (AB), $K = 11.9$ mag (Vega)) quasar at redshift $z=0.83$ — the optically brightest (unbeamed) quasar at $z>0.4$ . SMSS J114447.77-430859.3, at a Galactic latitude of $b=+18.1^{\circ}$ , was identified by its optical colours from the SkyMapper Southern Survey (SMSS) during a search for symbiotic binary stars. Optical and near-infrared spectroscopy reveals broad Mg ii , H $\unicode{x03B2}$ , H $\unicode{x03B1}$ , and Pa $\unicode{x03B2}$ emission lines, from which we measure a black hole mass of $\log_{10}\! (M_{\mathrm{BH}}/\mathrm{M}_{\odot}) = 9.4 \pm 0.5$ . With its high luminosity, $L_{\mathrm{bol}} = (4.7\pm1.0)\times10^{47}\,\mathrm{erg\,s}^{-1}$ or $M_{i}(z=2) = -29.74$ mag (AB), we estimate an Eddington ratio of $\approx1.4$ . As the most luminous quasar known over the last ${\sim}$ 9 Gyr of cosmic history, having a luminosity $8\times$ greater than 3C 273, the source offers a range of potential follow-up opportunities.

Astronomy & Astrophysics↗

Flexible 2D Boron Imidazolate Framework for Polysulfide Adsorption in Lithium–Sulfur Batteries

We report the "polysulfide shuttle," a process initiated by the dissolution of polysulfides, is recognized to be one of the major failure mechanisms of lithium-sulfur (Li-S) batteries. Much research effort has been dedicated toward efficient cathode additives and host materials to suppress the leaching of polysulfide species. Herein, we report a new 2D metal-organic framework constituted by a tritopic ligand, boron imidazolate ([BH(Im) 3 ] - , Im = imidazole), and Co 2+ ions for lithium polysulfide adsorption. The cobalt imidazolate framework (CoN 6 -BIF) contains octahedrally coordinated Co centers that form two-dimensional layers in the a,b plane. Composite cathodes containing CoN 6 -BIF exhibited high sulfur utilization and capacity retention, resulting in improved specific capacity and cycle life compared to sulfur/carbon controls. Density functional theory (DFT) calculations suggest that CoN 6 -BIF linkers are rotationally flexible, allowing the framework to accommodate polysulfide in the expanded pores. This unusual property of BIFs opens up new avenues for exploring flexible metal-organic frameworks (MOFs) and their applications to energy storage.

25 ENERGY STORAGE↗

Computational Investigation of the Chemical Bond between An(III) Ions and Soft-Donor Ligands

The chemical bonding of actinide ions with arene and borohydride ligands is explored via quantum chemical methods to understand how the transuranium elements interact with softdonor ligands. Specifically, the [An(C 6 Me 6 )(BH 4 ) 3 ] complexes (An = U, Np, and Pu) and their reduced congeners are studied. Density functional theory (DFT) shows that the metal–ligand interactions in the neutral complexes are governed by electrostatic interactions. Both DFT and complete active space (CASSCF) results show that as one moves from U to Pu, the 5f-orbitals are stabilized leading to a poorer energy match with the ligand orbitals. This contributes to progressively weaker metal-arene and metal-borohydride interactions across the series due to a decrease in energy-driven covalency. A reduction in orbital contributions to bonding is obtained for the transuranium-arene interactions as well. Upon reduction, the arene is reduced, forming a δ-bond. This causes the An–arene distances to contract by 0.1–0.2 Å compared to the neutral complexes. The ground state is assigned as the intermediate-spin state where the arene radical is antiferromagnetically coupled to the metal-centered f-electrons in Np and Pu. On the other hand, the ferromagnetically and antiferromagnetically coupled states are close in energy in the uranium complex, but do not mix when spin– orbit coupling is included using a state-interaction approach (SO-CASPT2). The population of the CASSCF δ*-antibonding natural orbital increases from U to Pu consistent with the increased An–arene distances, weaker interactions, and decreasing covalency across the series. Although the An–B distance increases by ca. 0.06 Å upon reduction, both the neutral and reduced species involve an An(III)–borohydride bond and as such are qualitatively similar. The Np complexes can be assigned to have slightly weaker bonding than the uranium analogs but are overall “uranium-like”. The Pu complexes are predicted to have less covalent contributions to bonding in both the Pu–arene and Pu–borohydride interactions; however, the Pu–arene interaction is predicted to be particularly weak.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stabilization of [(N 5 ) 2 BX] 2– and [(N 5 ) 2 B 2 X 2 ] 2– (X = H, F, Cl, Br) by Conjugation and Hyperconjugation Effects

The isolation of nucleophilic boron bases has led to a paradigm shift in boron chemistry. Previous studies of the bis(carbene) borylene complexes revealed that these compounds possess strong donor abilities, and their reaction inertness is due to the large steric hindrance between boron reagents and reactant. In the present study, we have theoretically studied the [(N 5 ) 2 BX] 2– and [(N 5 ) 2 B 2 X 2 ] 2– compounds (X = H, F, Cl, Br). Their electronic structures and properties are discussed by using the NBO, LOL, and ELF methods. We found that both π-conjugation and hyperconjugation effects can effectively stabilize the substituted nucleophilic anionic boron compounds [(N 5 ) 2 BX] 2– and [(N 5 ) 2 B 2 X 2 ] 2– . Substituents, especially X = H, stabilize the boron center through highly delocalized π-bonding, involving the formally “empty” in-plane p orbitals of the boron atom. While the halogen substituents have high electron withdrawal ability, leading to systems being less stable, we suggest the borinium anions [(N 5 ) 2 BH] 2– and [(N 5 ) 2 B 2 H 2 ] 2– as possible synthetic targets of novel environmentally friendly catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Model for Atomic Precision p-Type Doping with Diborane on Si(100)-2×1

Diborane (B 2 H 6 ) is a promising molecular precursor for atomic precision p-type doping of silicon that has recently been experimentally demonstrated. In this study, we use density functional theory (DFT) calculations to determine the reaction pathway for diborane dissociating into a species that will incorporate as electrically active substitutional boron after adsorbing onto the Si(100)-2×1 surface. Our calculations indicate that diborane must overcome an energy barrier to adsorb, explaining the experimentally observed low sticking coefficient (<1 × 10 –4 at room temperature) and suggesting that heating can be used to increase the adsorption rate. Upon sticking, diborane has an ≈50% chance of splitting into two BH 3 fragments versus merely losing hydrogen to form a dimer such as B 2 H 4 . As boron dimers are likely electrically inactive, whether this latter reaction occurs is shown to be predictive of the incorporation rate. The dissociation process proceeds with significant energy barriers, necessitating the use of high temperatures for incorporation. Using the barriers calculated from DFT, we parameterize a Kinetic Monte Carlo model that predicts the incorporation statistics of boron as a function of the initial depassivation geometry, dose, and anneal temperature. Our results suggest that the dimer nature of diborane inherently limits its doping density as an acceptor precursor and furthermore that heating the boron dimers to split before exposure to silicon can lead to poor selectivity on hydrogen and halogen resists. This suggests that, while diborane works as an atomic precision acceptor precursor, other non-dimerized acceptor precursors may lead to higher incorporation rates at lower temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Machine Learning-Guided Exploration of Ternary Metal Borohydrides

We employ deep machine learning (ML) combined with first-principles calculations to explore energetically favorable ternary metal borohydrides. Using La–B–H as a prototype system, we demonstrate that iteratively trained ML models can efficiently screen hundreds of thousands of hypothetical structures and accurately select a small fraction of promising structures and compositions for further studies by first-principles calculations. Such an ML-guided approach dramatically accelerates the pace of materials discovery. A number of new La–B–H ternary compounds with formation energies within 100 meV/atom above the known ternary convex hull are discovered, including a known stable La(BH 4 ) 3 phase. Moreover, by replacing La with Group 1, 2, 3, 13, and 14 elements in the four lowest-energy La–B–H structures from our ML-guided predictions, several low-energy X–B-H (X = Mg, Ca, Sr, Ba, Sc, Y, Ac, Al, Ga, In, Si, Ge, Sn, Pb) compounds are predicted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Complexities in Sodium Ion Conductive Antiperovskite Revealed by Cryogenic Transmission Electron Microscopy

Here we use low-dose cryogenic transmission electron microscopy (cryo-TEM) to investigate the atomic-scale structure of antiperovskite Na 2 NH 2 BH 4 crystals by preserving the room-temperature cubic phase and carefully monitoring the electron dose. Via quantitative analysis of electron beam damage using selected area electron diffraction, we find cryogenic imaging provides 6-fold improvement in beam stability for this solid electrolyte. Cryo-TEM images obtained from flat crystals revealed the presence of a new, long-range-ordered supercell with a cubic phase. The supercell exhibits doubled unit cell dimensions of 9.4 Å × 9.4 Å as compared to the cubic lattice structure revealed by X-ray crystallography of 4.7 Å × 4.7 Å. The comparison between the experimental image and simulated potential map indicates the origin of the supercell is a vacancy ordering of sodium atoms. This work demonstrates the potential of using cryo-TEM imaging to study the atomic-scale structure of air- and electron-beam-sensitive antiperovskite-type solid electrolytes.

36 MATERIALS SCIENCE↗