SEARCH · Engineering Papers

Results for “Adiabatic Temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

DOE OSTI2025

ExINP NSA Ice Nucleating Particle Concentrations

This data set comprises cumulative ambient ice-nucleating particle (INP) concentrations measured at the National Oceanic and Atmospheric Administration's (NOAA’s) Barrow Atmospheric Baseline Observatory (71.3230° N, 156.6114° W, “BRW” hereafter), next to the Atmospheric Radiation Measurement (ARM) North Slope of Alaska (NSA) site and ~ 6 km northeast of the town of Utqiaġvik. Our INP abundance data were generated using a combination of online instrument, the Portable Ice Nucleation Experiment chamber ver. 3 (PINE-03), and an offline cold stage, the West Texas Cryogenic Refrigerator Applied to Freezing Test system (WT-CRAFT). Our online INP data are all from the Examining the Ice-Nucleating Particles from NSA (ExINP-NSA) campaign conducted from October 19, 2021 to May 24, 2024. The offline INP concentration analysis was performed at West Texas A&M University for aerosol particle samples collected on polycarbonate filters (with 0.2-micron diameter pores). The PINE-03 measurements, as well as sampling activities for offline INP measurements, were conducted using the BRW site. An inset laminar sampling stack was mounted to the instrument platform, allowing PINE-03 to intake particle-laden air. For most of the campaign period, the semi-autonomous PINE-03 chamber was remotely controlled from West Texas A&M University using the LabView interface through the BeyondTrust remote-access console. PINE-03 was set to conduct an immersion freezing expansion experiment (i.e., simulated adiabatic cooling along with RHw at or above 100%). Except during the scheduled maintenance periods, the time resolution of each expansion experiment was approximately 12 minutes. PINE-03 continuously measured INP concentrations during the entire campaign without any substantial breaks. For most of the campaign period, PINE scanned its set-point vessel air temperatures from -14 °C to -31 °C and back to -14 °C about every 120 minutes.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Large gyro-orbit model of ion velocity distribution in plasma near a wall in a grazing-angle magnetic field

A model is presented for the ion distribution function in a plasma at a solid target with a magnetic field $\boldsymbol {B}$ inclined at a small angle, $\alpha \ll 1$ (in radians), to the target. Adiabatic electrons are assumed, requiring $\alpha \gg \sqrt {Zm_{e}/m_{i}}$ , where $m_{e}$ and $m_{i}$ are the electron and ion mass, respectively, and $Z$ is the charge state of the ion. An electric field $\boldsymbol {E}$ is present to repel electrons, and so the characteristic size of the electrostatic potential $\phi$ is set by the electron temperature $T_{e}$ , $e\phi \sim T_{e}$ , where $e$ is the proton charge. An asymptotic scale separation between the Debye length $\lambda _{D} = \sqrt {\epsilon _0 T_{{e}} / e^{2} n_{{e}} }$ , the ion sound gyro-radius $\rho _{s} = \sqrt { m_{i} ( ZT_{e} + T_{i} ) } / (ZeB)$ and the size of the collisional region $d_{c} = \alpha \lambda _{\textrm {mfp}}$ is assumed, $\lambda _{D} \ll \rho _{s} \ll d_{c}$ . Here $\epsilon _0$ is the permittivity of free space, $n_{e}$ is the electron density, $T_{i}$ is the ion temperature, $B= |\boldsymbol {B}|$ and $\lambda _{\textrm {mfp}}$ is the collisional mean free path of an ion. The form of the ion distribution function is assumed at distances $x$ from the wall such that $\rho _{s} \ll x \ll d_{c}$ , that is, collisions are not treated. A self-consistent solution of the electrostatic potential for $x \sim \rho _{s}$ is required to solve for the quasi-periodic ion trajectories and for the ion distribution function at the target. The large gyro-orbit model presented here allows to bypass the numerical solution of $\phi (x)$ and results in an analytical expression for the ion distribution function at the target. It assumes that $\tau =T_{i}/(ZT_{e})\gg 1$ , and ignores the electric force on the quasi-periodic ion trajectory until close to the target. For $\tau \gtrsim 1$ , the model provides an extremely fast approximation to energy–angle distributions of ions at the target. These can be used to make sputtering predictions.

Physics↗

DOE OSTI2023

Reaching a burning plasma and ignition using smaller capsules/ Hohlraums , higher radiation temperatures, and thicker ablator/ice on the national ignition facility

In indirect-drive implosions, the final core hot spot energy and pressure and, hence, neutron yield attainable in 1D increase with increasing laser peak power and, hence, radiation drive temperature at the fixed capsule and Hohlraum size. Here we present simple analytic scalings validated by 1D simulations that quantify the improvement in performance and use this to explain existing data and simulation trends. Extrapolating to the 500 TW National Ignition Facility peak power limit in a low gas-fill 5.4 mm diameter Hohlraum based on existing high adiabat implosion data at 400 TW, 1.3 MJ and 1 × 10 16 yield, we find that a 2–3 × 10 17 yield (0.5–0.7 MJ) is plausible using only 1.8 MJ of laser energy. Based on existing data varying deuterium–tritium (DT) fuel thickness and dopant areal density, further improvements should be possible by increasing DT fuel areal density, and hence confinement time and yield amplification.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

A New 1-step Arrhenius Decomposition Model for PBX 9501: Calibration with Isochoric-Adiabatic High-Activation-Energy Asymptotics and Uncertainty Quantification

Here we present a new 1-step Arrhenius thermal decomposition model of PBX 9501. As opposed to previous studies, we use high-energy asymptotic theory, and previously published equations of state to parameterize the model to experimental critical-time data. The model parameters were fit to experimental data using a bootstrapping procedure to capture the effects of experimental uncertainty. Subsequent implementation of the model in a chemicalkinetics ODE solver shows good agreement of times to ignition vs initial temperature in isochoric thermal explosion calculations with the results of the high-energy asymptotic theory. We also compare the resultant ZND structures to those of one of our previously calibrated burn models.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

DOE OSTI2022

Bound on hot-spot mix in high-velocity, high-adiabat direct-drive cryogenic implosions based on comparison of absolute x-ray and neutron yields

In laser-driven implosions for laboratory fusion, the comparison of hot-spot x-ray yield to neutron production can serve to infer hot-spot mix. For high-performance direct-drive implosions, this ratio depends sensitively on the degree of equilibration between the ion and electron fluids. A scaling for x-ray yield as a function of neutron yield and characteristic ion and electron hot-spot temperatures is developed on the basis of simulations with varying degrees of equilibration. We apply this model to hot-spot x-ray measurements of direct-drive cryogenic implosions typical of the direct-drive designs with best ignition metrics. Furthermore, the comparison of the measured x-ray and neutron yields indicates that hot-spot mix, if present, is below a sensitivity estimated as ~ 2% by-atom mix of ablator plastic into the hot spot.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

O 2 -Dependence of reactions of 1,2-dimethoxyethanyl and 1,2-dimethoxyethanylperoxy isomers

Reaction mechanisms of Ṙ and ROȮ radicals derived from low-temperature oxidation of 1,2-dimethoxyethane (CH 3 O(CH 2 ) 2 OCH 3 ) were investigated using speciation from multiplexed photoionization mass spectrometry (MPIMS) measurements via Cl-initiated oxidation, in conjunction with electronic structure calculations. The experiments were conducted at 5 bar, from 450 K – 650 K, and O 2 concentrations from 1 · 10 14 cm –3 – 6 · 10 18 cm –3 to probe the effects on competing reaction channels of 1,2-dimethoxyethanyl (Ṙ) and 1,2-dimethoxyethanylperoxy (ROȮ) isomers. Several species were detected with photoionization spectral fitting – ethene, formaldehyde, methyl vinyl ether, and 2-methoxyacetaldehyde – and, as determined by electronic structure calculations, may form via unimolecular decomposition of 1,2-dimethoxyethanyl or 1,2-dimethoxyethanylperoxy. O 2 -dependent yield ratios show that the formation pathways for all species undergo a competition between O 2 -addition and unimolecular decomposition. Here, adiabatic ionization energies were also calculated and utilized along with exact mass determinations to infer contributions for other species derived exclusively from first- and second-O 2 -addition, including 1,2-dimethoxyethene, cyclic ethers, and dicarbonyls.

1,2-dimethoxyethane↗

DOE OSTI2025

The Atacama Cosmology Telescope: DR6 constraints on extended cosmological models

We use new cosmic microwave background (CMB) primary temperature and polarization anisotropy measurements from the Atacama Cosmology Telescope (ACT) Data Release 6 (DR6) to test foundational assumptions of the standard cosmological model, ΛCDM, and set constraints on extensions to it. We derive constraints from the ACT DR6 power spectra alone, as well as in combination with legacy data from the Planck mission. To break geometric degeneracies, we include ACT and Planck CMB lensing data and baryon acoustic oscillation data from DESI Year-1. To test the dependence of our results on non-ACT data, we also explore combinations replacing Planck with WMAP and DESI with BOSS, and further add supernovae measurements from Pantheon+ for models that affect the late-time expansion history. We verify the near-scale-invariance (running of the spectral index dn s /d ln k = 0.0062 ± 0.0052) and adiabaticity of the primordial perturbations. Neutrino properties are consistent with Standard Model predictions: we find no evidence for new light, relativistic species that are free-streaming (N eff = 2.86 ± 0.13, which combined with astrophysical measurements of primordial helium and deuterium abundances becomes N eff = 2.89 ± 0.11), for non-zero neutrino masses (∑m ν < 0.089 eV at 95% CL), or for neutrino self-interactions. We also find no evidence for self-interacting dark radiation (N idr < 0.134), or for early-universe variation of fundamental constants, including the fine-structure constant (α EM /α EM,0 = 1.0043 ± 0.0017) and the electron mass (m e /m e,0 = 1.0063 ± 0.0056). Our data are consistent with standard big bang nucleosynthesis (we find Y p = 0.2312 ± 0.0092), the COBE/FIRAS-inferred CMB temperature (we find T CMB = 2.698 ± 0.016 K), a dark matter component that is collisionless and with only a small fraction allowed as axion-like particles, a cosmological constant (w = -0.986 ± 0.025), and the late-time growth rate predicted by general relativity (γ = 0.663 ± 0.052). We find no statistically significant preference for a departure from the baseline ΛCDM model. In fits to models invoking early dark energy, primordial magnetic fields, or an arbitrary modified recombination history, we find H 0 = 69.9 +0.8 -1.5 , 69.1 ± 0.5, or 69.6 ± 1.0 km/s/Mpc, respectively; using BOSS instead of DESI BAO data reduces the central values of these constraints by 1–1.5 km/s/Mpc while only slightly increasing the error bars. In general, models introduced to increase the Hubble constant or to decrease the amplitude of density fluctuations inferred from the primary CMB are not favored over ΛCDM by our data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2025

Progress toward hydro-equivalent ignition in OMEGA direct-drive DT-layered implosions

Considerable progress has been made in deuterium-tritium-layered implosion experiments on the OMEGA Laser System, bringing the prospects for thermonuclear ignition in direct-drive configurations with megajoule-class lasers closer to reality. Doing so has required navigating the balance between improved 1D performance and multidimensional stability. Using statistical modeling based on over 350 cryogenic implosions to identify various degradation mechanisms, and combined with multidimensional simulations and experimental techniques such as target offsets to combat residual flows, core conditions have repeatably been achieved that extrapolate to the burning-plasma state when scaled to 2.15 MJ of symmetric laser illumination. Using high implosion velocities (⁠> 450 km/s) and moderately high adiabats (⁠~5⁠), these experiments produced record-high scaled Lawson parameters in direct drive equal to 89 ± 2% of that required for ignition with expected yields of up to 1.5 ± 0.2 MJ. To improve these results still further, focused physics studies are performed to improve physics understanding and identify routes to even greater performance. Recent studies include investigations into the impact of mounting features, laser imprint, reduced fuel temperatures, and greater on-target intensities through subscale experiments. This manuscript gives a summary of the cryogenic direct-drive program on the OMEGA laser, including routes taken to achieve the current best performance, the status of recent focused physics investigations, and future designs—such as target solutions to laser imprint and reducing vapor density to increase convergence—that are expected lead to the demonstration of hydro-equivalent ignition on OMEGA.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

On the Breakdown of ENSO's Relationship With Thermocline Depth in the Central-Equatorial Pacific

Recent classification of El Nino-Southern Oscillation (ENSO) into two types, Eastern (EP) and Central (CP) events, has highlighted the importance of the central Pacific. We show here that the local correlation between ENSO subsurface temperatures (T sub ) in the upper 100-m and thermocline depth anomalies breaks down in the central equatorial Pacific, whereas T sub remains well correlated with sea surface height anomalies. This observed difference in the central equatorial Pacific is simulated by almost all climate models. It arises from a vertically slanted Tsub anomaly structure that is unique to the central equatorial Pacific. We show that this feature is an adiabatic response to wind-driving that is even present in a linear dynamic model, as long as the model has enough baroclinic modes to adequately represent the observed vertical complexity. Our findings have implications for better understanding the different importance of thermocline feedback in CP and EP events.

58 GEOSCIENCES↗

DOE OSTI2021

Entropy generation from hydrodynamic mixing in inertial confinement fusion indirect-drive targets

The increase in entropy from the physical mixing of two adjacent materials in inertial confinement fusion (ICF) implosions and gas-filled hohlraums is analytically assessed. An idealized model of entropy generation from the mixing of identical ideal-gas particles across a material interface in the presence of pressure and temperature gradients is applied. Physically, mix-driven entropy generation refers to the work done by the gases in expanding into a larger common volume from atomic mixing under the condition of no internal energy change, or work needed to restore the initial unmixed state. Furthermore, the effect of a mix-generated entropy increase is analytically shown to lead to less compression of the composite ICF fluid under adiabatic conditions. The amount of entropy generation is estimated to be ~10 J for a Rayleigh–Taylor-induced micrometer-scale annular mixing layer between the solid deuterium–tritium fuel and (undoped) high-density carbon pusher of an imploding capsule at the National Ignition Facility (NIF). This level of entropy generation is consistent with lower-than-expected fuel compressions measured on the NIF [Hurricane et al., Phys. Plasmas 26, 052704 (2019)]. The degree of entropy increase from mixing of high-Z hohlraum wall material and low-Z, moderate- to high-density gas fills is estimated to lead to ~100 kJ of heat generation for NIF-scale experiments [Moody et al., Phys. Plasmas 21, 056317 (2014)]. This value represents a significant fraction of the inferred missing x-ray drive energy based on observed delays in capsule implosion times compared with mainline simulations [Jones et al., Phys. Plasmas 19, 056315 (2012)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Transient mixing behavior of a supercritical fluid injected into supercritical and subcritical environments

Transient, near-field mixing of a supercritical fluid injected into supercritical and subcritical environments is investigated experimentally. Fuel (propane) from a 100 μm diameter Bosch diesel injector is injected into a high-pressure test rig with a steady flow of heated, low-velocity nitrogen to control the ambient pressure and temperature. The fuel supply pressure is approximately 190 bar, allowing short injections lasting 3–4 ms to be performed in quick succession to acquire statistically significant datasets to represent the unsteady fuel–air mixing. Two test cases with the same ambient density and injector inlet pressure and temperature were chosen in an attempt to isolate effects of mixture phase behavior. Microscopic rainbow Schlieren deflectometry (RSD) is used for visualization and quantitative data acquisition. In the case of the supercritical ambient, the injector inlet and exit and ambient conditions are all supercritical. The RSD analysis reveals a mixing process similar to the single phase fluid mixing, though condensation is also observed locally, and can be explained by the adiabatic mixing theory presented in the paper. For the subcritical ambient case, the injector inlet is supercritical, but the injector exit and ambient conditions are both subcritical. The results show a rapid expansion in the near-field promoting mixing between propane and nitrogen. At downstream locations, significant condensation is also observed as predicted by the adiabatic mixing theory. As a result, the supercritical ambient case exhibited longer and narrower jet penetration compared to the subcritical ambient case.

02 PETROLEUM↗

DOE OSTI2021

Probing small-scale power spectra with pulsar timing arrays

Models of Dark Matter (DM) can leave unique imprints on the Universe’s small scale structure by boosting density perturbations on small scales. We study the capability of Pulsar Timing Arrays to search for, and constrain, subhalos from such models. The models of DM we consider are ordinary adiabatic perturbations in ΛCDM, QCD axion miniclusters, models with early matter domination, and vector DM produced during inflation. We show that ΛCDM, largely due to tidal stripping effects in the Milky Way, is out of reach for PTAs. Axion miniclusters may be within reach, although this depends crucially on whether the axion relic density is dominated by the misalignment or string contribution. Models where there is matter domination with a reheat temperature below 1 GeV may be observed with future PTAs. Lastly, vector DM produced during inflation can be detected if it is lighter than 10 16 GeV. We also make publicly available a Python Monte Carlo tool for generating the PTA time delay signal from any model of DM substructure.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2023

Drude weights in one-dimensional systems with a single defect

Ballistic transport of a quantum system can be characterized by Drude weight, which quantifies the response of the system to a uniform electric field in the infinitely long timescale. The Drude weight is often discussed in terms of the Kohn formula, which gives the Drude weight by the derivative of the energy eigenvalue of a finite-size system with the periodic boundary condition in terms of the Aharonov-Bohm flux. Recently, the Kohn formula is generalized to nonlinear responses. However, the nonlinear Drude weight determined by the Kohn formula often diverges in the thermodynamic limit. In order to elucidate the issue, in this work we examine a simple example of a one-dimensional tight-binding model in the presence of a single defect at zero temperature. We find that its linear and nonlinear Drude weights given by the Kohn formula (i) depend on the Aharonov-Bohm flux and (ii) diverge proportionally to a power of the system size. Here, we argue that the problem can be attributed to different order of limits. The Drude weight according to the Kohn formula (“Kohn-Drude weight”) indicates the response of a finite-size system to an adiabatic insertion of the Aharonov-Bohm flux. While it is a well-defined physical quantity for a finite-size system, its thermodynamic limit does not always describe the ballistic transport of the bulk. The latter should be rather characterized by a “bulk Drude weight” defined by taking the thermodynamic limit first before the zero-frequency limit. While the potential issue of the order of limits has been sometimes discussed within the linear response, the discrepancy between the two limits is amplified in nonlinear Drude weights. We demonstrate the importance of the low-energy excitations of O(1/L), which are excluded from the Kohn-Drude weight, in regularizing the bulk Drude weight.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Cyclic superconducting refrigerators using guided fluxon propagation

We propose cyclic refrigeration in solid state, employing a gas of magnetic field vortices in a type-II superconductor—also known as fluxons—as the cooling agent. Refrigeration cycles are realized by envisioning a racetrack geometry consisting of both adiabatic and isothermal arms, etched into a type-II superconductor. The guided propagation of fluxons in the racetrack is achieved by applying an external electrical current, in a Corbino geometry, through the sample. A gradient of magnetic field is set across the racetrack allowing one to adiabatically cool down and heat up the fluxons, which subsequently exchange heat with the cold and hot reservoirs, respectively. We characterize the steady state of refrigeration cycles thermodynamically for both s -wave and d -wave pairing symmetries, and present their figures of merit such as the cooling power delivered, and the coefficient of performance. Our cooling principle can offer significant cooling for on-chip microrefrigeration purposes, by locally cooling below the base temperatures achievable in a conventional dilution refrigerator. We estimate n W / m m 2 of cooling power per unit area assuming a tunnel coupling with ∼ M Ω µ m 2 specific resistance. Integrating the fluxon fridge to quantum circuits can enhance their coherence time by locally suppressing thermal fluctuations, and improve the efficiency of single photon detectors and charge sensors. Published by the American Physical Society 2024

Karmakar, Tathagata (ORCID:0000000187812017)↗

DOE OSTI2025

Efficiency and Physical Limitations of Adiabatic Direct Energy Conversion in Axisymmetric Fields

We describe and analyze a new class of direct energy conversion schemes based on the adiabatic magnetic drift of charged particles in axisymmetric magnetic fields. The efficiency of conversion as well as the geometrical and dynamical limitations of the recoverable power are calculated. The geometries of these axisymmetric field configurations are suited for direct energy conversion in radiating advanced aneutronic reactors and in advanced divertors of deuterium-tritium tokamak reactors. The E × B configurations considered here do not suffer from the classical drawbacks and limitations of thermionic and magnetohydrodynamic high-temperature direct energy conversion devices.

30 DIRECT ENERGY CONVERSION↗

DOE OSTI2024

Approximate Quantum Codes From Long Wormholes

We discuss families of approximate quantum error correcting codes which arise as the nearly-degenerate ground states of certain quantum many-body Hamiltonians composed of non-commuting terms. For exact codes, the conditions for error correction can be formulated in terms of the vanishing of a two-sided mutual information in a low-temperature thermofield double state. We consider a notion of distance for approximate codes obtained by demanding that this mutual information instead be small, and we evaluate this mutual information for the SYK model and for a family of low-rank SYK models. After an extrapolation to nearly zero temperature, we find that both kinds of models produce fermionic codes with constant rate as the number, N , of fermions goes to infinity. For SYK, the distance scales as N 1 / 2 , and for low-rank SYK, the distance can be arbitrarily close to linear scaling, e.g. N .99 , while maintaining a constant rate. We also consider an analog of the no low-energy trivial states property which we dub the no low-energy adiabatically accessible states property and show that these models do have low-energy states that can be prepared adiabatically in a time that does not scale with system size N . We discuss a holographic model of these codes in which the large code distance is a consequence of the emergence of a long wormhole geometry in a simple model of quantum gravity.

Physics↗

DOE OSTI2022

HȮ 2 + HȮ 2 : High level theory and the role of singlet channels

At low temperatures and high pressures, the HȮ 2 + HȮ 2 reaction is an important reaction in combustion. There are significant unresolved discrepancies between prior theoretical and experimental studies of this reaction. It has generally been presumed to occur as an abstraction on the triplet surface to produce H 2 O 2 + 3 O 2 . Here, we employ a combination of high-level electronic structure theory (the ANL0 composite method or multi-reference methods as appropriate), sophisticated transition state theory (vibrationally adiabatic torsions, variational, and variable reaction coordinate), and master equation analyses to predict the thermal kinetics on the H 2 O 4 surface. Notably, this analysis suggests a significant branching to HȮ 3 + ȮH near 1000 K via reaction on the singlet surface. This channel does not appear to have been considered in prior combustion models. HȮ 3 itself is a metastable complex (bound by only 3 kcal mol -1 ) that rapidly dissociates to ȮH + 3 O 2 . Thus, the net reaction for this channel, HȮ 2 + HȮ 2 → ȮH + ȮH + O 2 , converts two low reactivity HȮ 2 radicals into two highly reactive ȮH radicals. The ramifications of these newly derived rate expressions are highlighted through kinetic modeling studies of H 2 , CH 3 OH, $\textit{n}$-heptane, and isooctane oxidation; all at the high pressures of relevance to combustion devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Ultrafast lattice disordering can be accelerated by electronic collisional forces

In the prevalent picture of ultrafast structural phase transitions, the atomic motion occurs in a slowly varying potential energy surface determined adiabatically by the fast electrons. However, this ignores non-conservative forces caused by electron-lattice collisions, which can significantly influence atomic motion. Most ultrafast techniques only probe the average structure and are less sensitive to random displacements, and therefore do not detect the role played by non-conservative forces in phase transitions. Here we show that the lattice dynamics of the prototypical insulator-to-metal transition of VO 2 cannot be described by a potential energy alone. We use the sample temperature to control the preexisting lattice disorder before ultrafast photoexcitation across the phase transition and our ultrafast diffuse scattering experiments show that the fluctuations characteristic of the rutile metal develop equally fast (120 fs) at initial temperatures of 100 K and 300 K. This indicates that additional non-conservative forces are responsible for the increased lattice disorder. In conclusion, these results highlight the need for more sophisticated descriptions of ultrafast phenomena beyond the Born-Oppenheimer approximation as well as ultrafast probes of spatial fluctuations beyond the average unit cell measured by diffraction.

36 MATERIALS SCIENCE↗