Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ATTITUDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

The structure of cockpit management attitudes

A revised version of the Cockpit Management Attitudes Questionnaire (CMAQ) is introduced. Factor analyses of responses from 3 different samples reveal comparable factor structure (previous attempts to factor analyze this measure had produced equivocal results). Implications for the measurement of attitudes and the assessment of attitude change are discussed. It is argued that the CMAQ will benefit both special training programs and efforts to explore attitude-performance linkages in air-transport operations.

NASA Program Space Human Factors↗

On-board autonomous attitude maneuver planning for planetary spacecraft using genetic algorithms

A key enabling technology that leads to greater spacecraft autonomy is the capability to autonomously and optimally slew the spacecraft from and to different attitudes while operating under a number of celestial and dynamic constraints. The task of finding an attitude trajectory that meets all the constraints is a formidable one, in particular for orbiting or fly-by spacecraft where the constraints and initial and final conditions are of time-varying nature. This paper presents an approach for attitude path planning that makes full use of a priori constraint knowledge and is computationally tractable enough to be executed on-board a spacecraft. The approach is based on incorporating the constraints into a cost function and using a Genetic Algorithm to iteratively search for and optimize the solution. This results in a directed random search that explores a large part of the solution space while maintaining the knowledge of good solutions from iteration to iteration. A solution obtained this way may be used 'as is' or as an initial solution to initialize additional deterministic optimization algorithms. A number of example simulations are presented including the case examples of a generic Europa Orbiter spacecraft in cruise as well as in orbit around Europa. The search times are typically on the order of minutes, thus demonstrating the viability of the presented approach. The results are applicable to all future deep space missions where greater spacecraft autonomy is required. In addition, onboard autonomous attitude planning greatly facilitates navigation and science observation planning, benefiting thus all missions to planet Earth as well.

genetic algorithm↗

Managing Cassini Safe Mode Attitude at Saturn

The Cassini spacecraft was launched on October 15, 1997 and arrived at Saturn on June 30, 2004. It has performed detailed observations and remote sensing of Saturn, its rings, and its satellites since that time. In the event safe mode interrupts normal orbital operations, Cassini has flight software fault protection algorithms to detect, isolate, and recover to a thermally safe and commandable attitude and then wait for further instructions from the ground. But the Saturn environment is complex, and safety hazards change depending on where Cassini is in its orbital trajectory around Saturn. Selecting an appropriate safe mode attitude that insures safe operation in the Saturn environment, including keeping the star tracker field of view clear of bright bodies, while maintaining a quiescent, commandable attitude, is a significant challenge. This paper discusses the Cassini safe table management strategy and the key criteria that must be considered, especially during low altitude flybys of Titan, in deciding what spacecraft attitude should be used in the event of safe mode.

Attitude Control↗

Computer simulation for attitude disturbance torques for the Tiros-series.

Description of the Tiros-M Magnetic Attitude Prediction Program (TMMGAP), a simulation program designed to assist in the rotational motion control of the Tiros-series spacecraft. The subsystems of the program include input, attitude simulation, executive, attitude control and output components, simulating solar radiation pressure torque, gravity gradient torque, residual magnetic moment torque, and magnetic attitude control torques. The program provides data for prelaunch studies for launch window selection and mission planning, facilitates spacecraft spin axis reorientation after launch, provides spin axis control recommendations to meet mission constraints, and assists in the interpretation of cloud cover data. The program is characterized as effective in controlling spin axis and in processing picture data.

Sugai, I.↗

Pitch attitude, flight path, and airspeed control during approach and landing of a powered lift STOL aircraft

Analytical investigations and piloted moving base simulator evaluations were conducted for manual control of pitch attitude, flight path, and airspeed for the approach and landing of a powered lift jet STOL aircraft. Flight path and speed response characteristics were described analytically and were evaluated for the simulation experiments which were carried out on a large motion simulator. The response characteristics were selected and evaluated for a specified path and speed control technique. These charcteristics were: (1) the initial pitch response and steady pitch rate sensitivity for control of attitude with a pitch rate command/ attitude hold system, (2) the initial flight path response, flight path overshoot, and flight path-airspeed coupling in response to a change in thrust, and (3) the sensitivity of airspeed to pitch attitude changes. Results are presented in the form of pilot opinion ratings and commentary, substantiated where appropriate by response time histories and aircraft states at the point of touchdown.

Franklin, J. A.↗

Steady-state simulation program for attitude control propulsion systems

The formulation and the engineering equations employed in the steady state attitude control propulsion system simulation program are presented. The objective of this program is to aid in the preliminary design and development of propulsion systems used for spacecraft attitude control. The program simulates the integrated operation of the many interdependent components typically comprising an attitude control propulsion system. Flexibility, generality, ease of operation, and speed consistent with adequate accuracy were overriding considerations during the development of this program. Simulation modules were developed representing the various types of fluid components typically encountered in an attitude control propulsion system. These modules are basically self-contained and may be arranged by the program user into desired configuration through the program input data.

Heinmiller, P. J.↗

Attitude computation system

An attitude computation facility for the control of unmanned satellite missions is reported. The system's major components include: the ability to transfer the attitude data from the control center to the attitude computer at a rate of 2400 bps; an attitude computation center which houses communications, closed circuit TV, graphics devices and a data evaluation area; and the use of interactive graphics devices to schedule jobs and to control program flow.

Werking, R. D.↗

Some optimal considerations in attitude control systems

The conventional six-engine reaction control jet relay attitude control law with deadband is shown to be a good linear approximation to a weighted time-fuel optimal control law. Techniques for evaluating the value of the relative weighting between time and fuel for a particular relay control law is studied along with techniques to interrelate other parameters for the two control laws. Vehicle attitude control laws employing control moment gyros are then investigated. Steering laws obtained from the expression for the reaction torque of the gyro configuration are compared to a total optimal attitude control law that is derived from optimal linear regulator theory. This total optimal attitude control law has computational disadvantages in the solving of the matrix Riccati equation. Several computational algorithms for solving the matrix Riccati equation are investigated with respect to accuracy, computational storage requirements, and computational speed.

Boland, J. S., III↗

Satellite attitude prediction by multiple time scales method

An investigation is made of the problem of predicting the attitude of satellites under the influence of external disturbing torques. The attitude dynamics are first expressed in a perturbation formulation which is then solved by the multiple scales approach. The independent variable, time, is extended into new scales, fast, slow, etc., and the integration is carried out separately in the new variables. The theory is applied to two different satellite configurations, rigid body and dual spin, each of which may have an asymmetric mass distribution. The disturbing torques considered are gravity gradient and geomagnetic. Finally, as multiple time scales approach separates slow and fast behaviors of satellite attitude motion, this property is used for the design of an attitude control device. A nutation damping control loop, using the geomagnetic torque for an earth pointing dual spin satellite, is designed in terms of the slow equation.

Tao, Y. C.↗

Seasat-A attitude control system

The Seasat-A attitude control system controls the attitude of the satellite system during injection into final circular orbit after Atlas boost, during orbit adjust and trim phases, and throughout the 3-year mission. Ascent and injection guidance and attitude control are provided by the Agena spacecraft with a gyrocompassed mass expulsion system. On-orbit attitude control functions are performed by a system that has its functional roots in the gravity-gradient momentum bias technology. The paper discusses hardware, control laws, and simulation results.

Weiss, R.↗

Inertial attitude control of Voyager spacecraft using dry tuned rotor gyro

The inertial attitude control system designed for the Voyager spacecraft, which will carry out flybys of Jupiter and Saturn in 1979 and 1981, respectively, is described. The attitude of the spacecraft in three-dimensional space will be measured by a Dry Inertial Reference Unit (DIRU) based on three identical two-degree-of-freedom dry gyros. A software estimation process has been developed to use DIRU data and other information to obtain optimum estimates of spacecraft position, velocity, and acceleration. The attitude of the spacecraft is corrected using these estimates by activating hydrazine thrusters. The operation of dry gyros is discussed, together with the network compensation techniques used in their associated capture loop to obtain a capture capability of 8 deg/sec and a frequency response of 10 Hz (3-dB point). The control law and estimation process are examined. Results of computer simulation studies of the performance of the attitude control system are presented.

Bahrami, K.↗

Single-axis attitude determination accuracy

This paper extends the analysis of attitude determination accuracy introduced at the 1975 American Astronautical Society/American Institute of Aeronautics and Astronautics (AAS/AIAA) Astrodynamics Conference. It contains more generalized expressions, new geometrical relations, and additional applications. A complete set of attitude accuracy equations for both arc-length (portion of a great circle) and rotation-angle (dihedral angle) measurements are presented. These expressions can then be applied to determine the geometrical conditions under which a specified accuracy can be achieved by using either the attitude or a selected reference-vector direction as the independent variable. Representative applications to attitude determination accuracy studies and launch window analyses are discussed. The clear physical interpretation and straightforward graphical procedures greatly simplify mission analysis, maneuver planning, hardware configuration studies, and interpretation of results.

Chen, L. C.↗

The magnetic attitude control of the Atmosphere Explorer-E spacecraft

The Atmosphere Explorer-E spacecraft was launched in November 1975, as the last of the Atmosphere Explorer series. It is a dual spin satellite and has on-board magnetic coils to maintain the spin axis of the spacecraft within 2 degrees of orbit normal. There is a constraint on the total angular momentum to keep it at a constant level, at around 1200 in-lb-sec +/-10 percent. On the previous AE satellites, the attitude and momentum were controlled separately, with dipoles mounted parallel to the spin axis for pure attitude control, and with coils in the spin plane to desaturate the momentum wheel. Due to the near-equatorial orbit of the AE-E spacecraft, spin axis coils would be inefficient, because the dipoles would have been closely aligned with the geomagnetic field vector. For this reason it was decided to control both attitude and momentum magnitude with dipoles in the spin plane. However, for spin plane coils the attitude and momentum control are strongly coupled, which required a special control theory to be worked out.

Grell, M. G.↗

On-orbit experience with the HEAO attitude control subsystem

The first satellite (HEAO-1) in the High Energy Astronomy Observatory Program series was launched successfully on Aug. 12, 1977. To date it has completed over nine months of orbital operation in a science data gathering mode. During this period all attitude control modes have been exercised and all primary mission objectives have been achieved. This paper highlights the characteristics of the attitude control subsystem design and compares the predicted performance with the actual flight operations experience. Environmental disturbance modeling, component hardware/software characteristics, and overall attitude control performance are reviewed and are found to compare very well with the prelaunch analytical predictions. Brief comments are also included regarding the operations aspects of the attitude control subsystem. The experience in this regard demonstrates the effectiveness of the design flexibility afforded by the presence of a general purpose digital processor in the subsystem flight hardware implementation.

Hoffman, D. P.↗

Ground attitude determination and gyro calibration procedures for the HEAO missions

The Attitude Ground Support System (AGSS) at Goddard Space Flight Center provides ground attitude support for the High Energy Astronomy Observatory (HEAO) missions. The AGSS uses information telemetered from sun sensors, gyroscopes, star trackers (STAs), and an onboard computer to calculate updates to the onboard attitude reference and gyro calibration parameters. This paper presents the procedures used by the AGSS in computing reference and calibration updates; it also provides HEAO-1 postlaunch statistics that illustrate the ability to maintain 0.25-deg accuracy in the onboard attitude reference. Simulated HEAO-B results show an improvement in reference accuracy through the use of calibration maneuvers.

Fallon, L., III↗

Autonomous attitude determination systems

A summary of autonomous attitude determination systems is presented by separating it into four areas: types of attitude determination systems which can be automated, a description of the attitude determination problem and its solution, specific types of sensors, and the processor requirements of two automated systems. The sensors used in attitude determination have been characteristically carried on-board the spacecraft in the past, so the major development requirement of automated systems is in the area of on-board processors. It is concluded that standardization of computers is not as beneficial as the standardization of computer architecture and the basic components which go into making them. It is also concluded that charge-coupled devices (CCD) or other solid state star tracking devices offer considerable advantages over the image-dissector type of star tracker.

Lowrie, J. W.↗

Magsat attitude dynamics and control: Some observations and explanations

Before its reentry 7 months after launch, Magsat transmitted an abundance of valuable data for mapping the Earth's magnetic field. As an added benefit, a wealth of attitude data for study by spacecraft dynamicists was also collected. Because of its unique configuration, Magsat presented new control problems. With its aerodynamic trim boom, attitude control was given an added dimension. Minimization of attitude drift, which could be mapped in relative detail, became the goal. Momentum control, which was accomplished by pitching the spacecraft in order to balance aerodynamic and gravity gradient torques, was seldom difficult to achieve. Several interesting phenomena observed as part of this activity included occasional momentum wheel instability and a rough correlation between solar flux and the pitch angle required to maintain acceptable momentum. An overview is presented of the attitude behavior of Magsat and some of the control problems encountered. Plausible explanations for some of this behavior are offered. Some of the control philosophy used during the mission is examined and aerodynamic trimming operations are summarized.

Stengle, T. H.↗

Determination of spacecraft attitude using synthetic aperture radar data

A method has been developed for precise sensor platform attitude determination which exploits the availability of synthetic aperture radar (SAR) sensors on future planned NASA earth orbiting spacecraft. Using the ephemeris along with data on planet shape and rotation, the relative motion between sensor and target area and therefore the Doppler frequency shift in the returned echo data is determined. Equations have been developed that relate the Doppler shift to the antenna attitude. The method is tested by comparing attitude predictions from SEASAT SAR digital echo data with available conventionally determined SEASAT attitude information.

Wu, C.↗