Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ATMOSPHERES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Comparison of near-background concentrations of Argon-37 and Xenon-133 in the Atmosphere

Radioisotopes of noble gases xenon and argon can be important indicators of underground nuclear explosions. The Comprehensive Nuclear-Test-Ban Treaty (CTBT) includes monitoring capabilities to identify potential nuclear explosions conducted in violation of the CTBT. This monitoring currently focuses on measurement of the xenon isotopes 133Xe, 135Xe, 131mXe and 133mXe. However, it is predicted that within 100 days of an underground nuclear explosion (UNE) 37Ar would be released to the atmosphere at higher concentrations than xenon isotopes (Haas et al. 2010) and with a higher signal to background ratio, depending on the radioxenon background levels. Therefore, inclusion of 37Ar measurement capabilities at atmospheric International Monitoring System (IMS) stations may represent an improvement in the capability to detect a nuclear explosion. At an IMS station, it could be difficult to determine what constitutes an elevated concentration as a result of an UNE without first understanding the expected range of background concentrations. This work describes our analysis of atmospheric samples for 37Ar to evaluate the range of background concentrations. Samples were collected at multiple locations, with approximately half coming from a sampler co-located with an IMS xenon monitoring station (RN75). The range of 37Ar concentrations measured in atmospheric air samples was relatively narrow; for samples considered detectable, the minimum and maximum measured concentrations were 0.56 and 2.3 mBq/m3, respectively. Comparison of 37Ar and 133Xe concentrations measured at the IMS station indicated some correlation between the measured concentrations. The results presented here demonstrate the capability to detect background concentrations of 37Ar in atmospheric air and provide a basis for potential implementation of 37Ar monitoring at IMS stations.

Fritz, Brad G.↗
DOE OSTI2021

Determination of oxidation rates and volatile oxidation products for HTGR graphite matrix material exposed to steam atmospheres

High-temperature gas-cooled reactors (HTGRs) in operation use tristructural isotropic (TRISO) particles embedded in graphite and carbonized resin matrix to form the fuel element. This graphite matrix material serves as a supportive structural element, heat transfer medium, and neutron moderator. In HTGR designs, fuel compacts are exposed to helium coolant, which facilitates high outlet temperatures (750°C 2 O, 800°C 2 , and H 2 , are quantified in varied oxidant atmospheres using a coupled thermogravimetric analyzer and mass spectrometer. Furthermore, oxidation rates reported here for varied steam (H 2 O [g]) atmospheres are predominantly linear and comparable with literature values in the range of tested temperatures (800–1200°C). Changes in dominant matrix oxidation products from primarily CO to a mixture of CO, CO 2 , and H 2 were observed at higher temperatures (≥1000°C) and steam atmospheres (≥5 kPa pH 2 O). Kinetic data indicates that there was no shift in oxidation regime with chemical oxidation occurring at all temperatures and H2O (g) atmospheres tested. These data provide insight into the oxidation behavior of graphite matrix material and will inform future testing conditions, notably mixed atmospheric conditions, of HTGR fuel elements.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Atmospheric Carbon and Transport – America (ACT-America) Data Sets: Description, Management, and Delivery

The ACT-America project is a NASA Earth Venture Suborbital-2 mission designed to study the transport and fluxes of greenhouse gases. The open and freely available ACT-America data sets provide airborne in situ measurements of atmospheric carbon dioxide, methane, trace gases, aerosols, clouds, and meteorological properties, airborne remote sensing measurements of aerosol backscatter, atmospheric boundary layer height and columnar content of atmospheric carbon dioxide, tower-based measurements, and modeled atmospheric mole fractions and regional carbon fluxes of greenhouse gases over the Central and Eastern United States. In this study, we conducted 121 research flights during five campaigns in four seasons during 2016–2019 over three regions of the US (Mid-Atlantic, Midwest and South) using two NASA research aircraft (B-200 and C-130). We performed three flight patterns (fair weather, frontal crossings, and OCO-2 underflights) and collected more than 1,140 h of airborne measurements via level-leg flights in the atmospheric boundary layer, lower, and upper free troposphere and vertical profiles spanning these altitudes. We also merged various airborne in situ measurements onto a common standard sampling interval, which brings coherence to the data, creates geolocated data products, and makes it much easier for the users to perform holistic analysis of the ACT-America data products. Here, we report on detailed information of data sets collected, the workflow for data sets including storage and processing of the quality controlled and quality assured harmonized observations, and their archival and formatting for users. Finally, we provide some important information on the dissemination of data products including metadata and highlights of applications of ACT-America data sets.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Anthropogenic Perturbations to the Atmospheric Molybdenum Cycle

Abstract Molybdenum (Mo) is a key cofactor in enzymes used for nitrogen (N) fixation and nitrate reduction, and the low availability of Mo can constrain N inputs, affecting ecosystem productivity. Natural atmospheric Mo aerosolization and deposition from sources such as desert dust, sea‐salt spray, and volcanoes can affect ecosystem function across long timescales, but anthropogenic activities such as combustion, motor vehicles, and agricultural dust have accelerated the natural Mo cycle. Here we combined a synthesis of global atmospheric concentration observations and modeling to identify and estimate anthropogenic sources of atmospheric Mo. To project the impact of atmospheric Mo on terrestrial ecosystems, we synthesized soil Mo data and estimated the global distribution of soil Mo using two approaches to calculate turnover times. We estimated global emissions of atmospheric Mo in aerosols (<10 μm in diameter) to be 23 Gg Mo yr −1 , with 40%–75% from anthropogenic sources. We approximated that for the top meter of soil, Mo turnover times range between 1,000 and 1,000,000 years. In some industrialized regions, anthropogenic inputs have enhanced Mo deposition 100‐fold, lowering the soil Mo turnover time considerably. Our synthesis of global observational data, modeling, and a mass balance comparison with riverine Mo exports suggest that anthropogenic activity has greatly accelerated the Mo cycle, with potential to influence N‐limited ecosystems.

Wong, Michelle Y.↗
DOE OSTI2022

Atmospheric Structure Prediction for Infrasound Propagation Modeling Using Deep Learning

Abstract Infrasound is generated by a variety of natural and anthropogenic sources. Infrasonic waves travel through the dynamic atmosphere, which can change on the order of minutes to hours. Infrasound propagation largely depends on the wind and temperature structure of the atmosphere. Numerical weather prediction models are available to provide atmospheric specifications, but uncertainties in these models exist and they are computationally expensive to run. Machine learning has proven useful in predicting tropospheric weather using Long Short‐Term Memory (LSTM) networks. An LSTM network is utilized to make atmospheric specification predictions up to ∼30 km for three different training and testing scenarios: (a) the model is trained and tested using only radiosonde data from the Albuquerque, NM, USA station, (b) the model is trained on radiosonde stations across the contiguous US, excluding the Albuquerque, NM, USA station, which was reserved for testing, and (c) the model is trained and tested on radiosonde stations across the contiguous US. Long Short‐Term Memory predictions are compared to a state‐of‐the‐art reanalysis model and show cases where the LSTM outperforms, performs equally as well, or underperforms in comparison to the state‐of‐the‐art. Regional and temporal trends in model performance across the US are also discussed. Results suggest that the LSTM model is a viable tool for predicting atmospheric specifications for infrasound propagation modeling.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

The Flux-Differencing Discontinuous Galerkin Method Applied to an Idealized Fully Compressible Nonhydrostatic Dry Atmosphere

Dynamical cores used to study the circulation of the atmosphere employ various numerical methods ranging from finite-volume, spectral element, global spectral, and hybrid methods. In this work, we explore the use of Flux-Differencing Discontinuous Galerkin (FDDG) methods to simulate a fully compressible dry atmosphere at various resolutions. We show that the method offers a judicious compromise between high-order accuracy and stability for large-eddy simulations and simulations of the atmospheric general circulation. In particular, filters, divergence damping, diffusion, hyperdiffusion, or sponge-layers are not required to ensure stability; only the numerical dissipation naturally afforded by FDDG is necessary. We apply the method to the simulation of dry convection in an atmospheric boundary layer and in a global atmospheric dynamical core in the standard benchmark of Held and Suarez

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Evaluating Atmospheric River Impacts on Energy and Moisture Transport in the Arctic Using Different Detection Algorithms

Atmospheric rivers (ARs) significantly impact the Arctic climate system by enhancing atmospheric heat and moisture transport and altering the local energy budget. Developing AR detection tools (ARDTs) is critical yet challenging. This study evaluates 12 ARDTs in the Arctic to assess their performance in representing atmospheric heat (represented by moist static energy) and moisture transport, as well as surface downward longwave radiation (LWD) and precipitation impacts, spanning 2000 to 2019 using ERA5 reanalysis. We find that AR occurrence frequency in the Arctic varies widely, from less than 1% to over 13%, depending on the ARDT. This variability leads to differences in contributions to poleward atmospheric heat (<1%–33%) and moisture (<1%–49%) transport. The highest AR frequency, and corresponding contributions to atmospheric heat and moisture transport, occurs over the Atlantic sector during non-summer seasons for most ARDTs. This region aligns with the primary poleward moisture pathway and the end of climatological mid-latitude storm tracks, highlighting strong connections between Arctic ARs and mid-latitude cyclones. ARs induce significant LWD anomalies, largest in winter, smallest in summer, and also substantially contribute to the seasonal precipitation. Global ARDTs detect fewer ARs with larger anomalies (>100 W m−2 in higher Arctic), but contribute <1% to seasonal climatological LWD and precipitation. In contrast, polar-specific ARDTs detect higher AR occurrences and account for up to 16% of seasonal LWD and 41% precipitation. This suggests that algorithms emphasizing extreme events with large anomalies do not necessarily indicate a large climate radiative and precipitation impact.

Zhang, Chen [University of Colorado, Boulder, CO (↗
DOE OSTI2025

Implementation and Evaluation of Emission‐Driven Land‐Atmosphere Coupled Simulation in E3SMv2.1

Emissions-driven (prognostic CO 2 ) simulations are essential for representing two-way carbon-climate feedback in Earth System Models. We present an emissions-driven land–atmosphere coupled biogeochemistry (BGC) configuration (BGCLNDATM_progCO2) in version 2.1 of the Energy Exascale Earth System Model (E3SMv2.1). This is the first E3SM configuration that performs land-atmosphere emission-hindcasts. Here, we document its implementation, evaluate the model's performance against observations and other models, and propose a structured evaluation protocol for such emissions-driven simulations. We conducted transient historical simulations (1850–2014) with BGCLNDATM_progCO2 and compare them to reference simulations—a land-atmosphere coupled simulation without BGC and a standalone land simulation with BGC, both using prescribed CO 2 concentrations—and to observations. BGCLNDATM_progCO2 overestimates atmospheric CO 2 concentrations by 11–23 ppm yet stays within the 40-ppm spread CMIP6 emission-driven models and retains physical climate properties comparable to the reference runs. The CO 2 biases are partly attributed to underrepresented oceanic CO 2 uptake and inadequate representations of some terrestrial processes. In general, introducing prognostic CO 2 did not change physical climate metrics at the global scale but had larger regional effects, particularly over land where spatially heterogeneous CO 2 and prognostic leaf area index influenced surface energy balance. Finally, we propose a general evaluation protocol including spin-up assessment, atmospheric CO 2 benchmarking, physical climate evaluation, and land biogeochemical analysis to support scientific rigor and facilitate inter-model comparisons. The new configuration lays the groundwork for future enhancements, including improved terrestrial biogeochemical processes, integrated marine biogeochemistry, and additional human–Earth system interactions. These developments advance E3SM toward fully coupled emissions-driven simulations, enabling more accurate carbon–climate feedback projections and informing mitigation policy by providing physically consistent carbon-budget metrics for mitigation scenarios.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Atmospheric Feedbacks Reverse the Sensitivity of Modeled Photosynthesis to Stomatal Function

Stomata mediate fluxes of carbon and water between terrestrial plants and the atmosphere. These fluxes are governed by stomatal function and can be modulated in many Earth system models by an empirical parameter within the calculation of stomatal conductance, the stomatal slope (𝑔 1⁢𝑀 ). Intuitively, 𝑔 1⁢𝑀 represents the marginal water cost of carbon, relating it to the emergent plant property of water use efficiency. Observations show that 𝑔 1⁢𝑀 can range widely across and within plant types in varying environments, and this distribution of 𝑔 1⁢𝑀 is not captured within Earth system models which represent each plant type with a single 𝑔 1⁢𝑀 value. Here we examine how 𝑔 1⁢𝑀 influences photosynthesis using coupled Earth system model simulations by perturbing 𝑔 1⁢𝑀 to observed 5⁢t⁢h and 95⁢t⁢h percentiles for each plant type. We find that high 𝑔 1⁢𝑀 reduces photosynthesis nearly everywhere, while low 𝑔 1⁢𝑀 has regionally dependent responses. Under fixed atmospheric conditions, low 𝑔 1⁢𝑀 increases photosynthesis in the Amazon and central North America but decreases photosynthesis in boreal Canada. These responses reverse when the atmosphere responds interactively due to spatially differing sensitivity to increases in temperature and vapor pressure deficit. Choice of 𝑔 1⁢𝑀 also influences photosynthetic response to changes in atmospheric carbon dioxide (CO 2 ), with lower and higher 𝑔1⁢𝑀 modifying total global response to elevated 2x preindustrial CO 2 by +6.4% and −9.6%, respectively. Our work demonstrates that atmospheric feedbacks are critical for determining the photosynthetic response to 𝑔 1⁢𝑀 assumptions and some regions are particularly sensitive to choice of 𝑔 1⁢𝑀 .

Liu, Amy X. [University of Washington, Seattle, WA↗
DOE OSTI2020

A Study of Low-Temperature Neutron Star Atmospheres

We present a study of how a low-temperature accreted atmosphere influences the emitted X-ray spectrum of a neutron star. The atmosphere models and spectra were computed with Zcode, a multigroup radiation transfer code developed at the Los Alamos National Laboratory. Though the underlying hot neutron star behaves as a blackbody, the atmosphere shifts the peak of spectrum away from a blackbody and toward higher energies, producing an emitted spectrum similar to a dilute blackbody. Quantifying the effects of this atmosphere will remove a source of uncertainty in X-ray observations and better constrain the mass-radius relation for neutron stars and thus the equation of state of dense matter. We present a suite of these atmospheres with varying compositions and temperatures as well as the resulting spectra.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Atmospheric parameters and chemical abundances within 100 pc: a sample of G, K, and M main-sequence stars

ABSTRACT To date, we have access to enormous inventories of stellar spectra that allow the extraction of atmospheric parameters and chemical abundances essential in stellar studies. However, characterizing such a large amount of data is complex and requires a good understanding of the studied object to ensure reliable and homogeneous results. In this study, we present a methodology to measure homogenously the basic atmospheric parameters and detailed chemical abundances of over 1600 thin disc main-sequence stars in the 100 pc solar neighbourhood, using APOGEE-2 infrared spectra. We employed the code tonalli to determine the atmospheric parameters using a prior on $\log {g}$. The $\log {g}$ prior in tonalli implies an understanding of the treated population and helps to find physically coherent answers. Our atmospheric parameters agree within the typical uncertainties (100 K in $\mathrm{T_{eff}}$, 0.15 dex in $\log {g}$ and [M/H]) with previous estimations of ASPCAP and Gaia DR3. We use our temperatures to determine a new infrared colour–temperature sequence, in good agreement with previous works, that can be used for any main-sequence star. Additionally, we used the bacchus code to determine the abundances of Mg, Al, Si, Ca, and Fe in our sample. The five elements (Mg, Al, Si, Ca, Fe) studied have an abundance distribution centred around slightly subsolar values in agreement with previous results for the solar neighbourhood. The over 1600 main-sequence stars’ atmospheric parameters and chemical abundances presented here are useful in follow-up studies of the solar neighbourhood or as a training set for data-driven methods.

López-Valdivia, Ricardo (ORCID:0000000277950018)↗
DOE OSTI2025

Exploring the interference between the atmospheric and solar neutrino oscillation subamplitudes

The interference between the atmospheric and solar neutrino oscillation subamplitudes is said to be responsible for C P violation () in neutrino appearance channels. More precisely, is generated by the interference between the parts of the neutrino oscillation amplitude that are C P even and C P odd: even or odd when the neutrino mixing matrix is replaced with its complex conjugate. This is the interference term, as it gives a contribution to the oscillation probability, the square of the amplitude, which is opposite in sign for neutrinos and antineutrinos and is unique. For this interference to be nonzero, at least two subamplitudes are required. There are, however, other interference terms, which are even under the above exchange, and these are the C P conserving () interference terms. In this paper, we explore in detail these interference terms and show that they cannot be uniquely defined, as one can move pieces of the amplitude from the atmospheric subamplitude to the solar subamplitude and vice versa. This freedom allows one to move the interference terms around, but does not let you eliminate them completely. We also show that there is a reasonable definition of the atmospheric and solar subamplitudes for the appearance channels such that in neutrino disappearance probability there is no atmospheric-solar interference term. However, with this choice, there is a interference term within the atmospheric sector. Published by the American Physical Society 2025

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Full‐Waveform Simulation of Infrasound Propagation in the Atmosphere: A Case Study of the 2023 April 20 SpaceX Starship Explosion

Infrasound, low‐frequency sound below 20 Hz, has been a key technology to monitor explosion events in the atmosphere. The International Monitoring System (IMS) of the Comprehensive Nuclear‐Test‐Ban Treaty Organization provides the means for continuous monitoring of infrasonic events worldwide. Infrasonic techniques for event location and size estimation can also complement other observational techniques for the detection and characterization of the entry of asteroids or large meteoroids. In this study, we describe the detection capability of IMS infrasound stations for an explosive event in the middle of the atmosphere. Full‐waveform simulations are performed with the specification of atmospheric conditions and incorporated into the event location and explosion yield estimation. We applied it to the 2023 April 20 SpaceX Starship explosion at 29 km altitude. Starship is a super heavy‐lift space vehicle constructed by SpaceX and known as the largest and most powerful rocket ever built. The Starship explosion created huge pressure disturbances in the atmosphere, and its infrasound was detected by the IMS arrays in North America between 2000 and 4000 km. Independent observational data and available ground‐truth information provide a rare opportunity to evaluate the monitoring capability of the IMS network for elevated sources in the atmosphere. We also demonstrate the capability of full‐waveform simulation for infrasound wavefield characterization and prediction to improve event location and yield estimation.

Geosciences↗
DOE OSTI2023

A Novel Method for Diagnosing Land–Atmosphere Coupling Sensitivity in a Single-Column Model

The response of boundary layer properties and cloudiness to changes in surface evaporative fraction (EF) is investigated in a single-column model to quantify the locally coupled impact of subgrid surface variations on the atmosphere during summer. Sensitive coupling days are defined when the model atmosphere exhibits large variations across a range of EFs centered on the analyzed value. Coupling sensitivity exists as both positive feedback (cloudiness increases with EF) and negative feedback (clouds increase with decreasing EF) regimes. The positive regime manifests in shallow convection situations, which are capped by a strengthened inversion and subsidence, restricting the vertical extent of convection to just above the boundary layer. Surfaces with larger EF (greater surface latent heat flux) can inject more moisture into the vertically confined system, lowering the cloud base and an increasing cloud liquid water path (LWP). Negative feedback regimes tend to manifest when large-scale deep convection, such as from mesoscale convective systems and fronts, is advected through the domain, where convection strengthens over surfaces with a lower EF (greater surface sensible heat flux). The invigoration of these systems by the land surface leads to an increase in LWP through strengthened updrafts and stronger coupling between the boundary layer and the free atmosphere. These results apply in the absence of heterogeneity-induced mesoscale circulations, providing a one-dimensional dynamical perspective on the effect of surface heterogeneity. Finally, this study provides a framework of intermediate complexity, lying between parcel theory and high-resolution coupled land–atmosphere modeling, and therefore isolates the relevant first-order processes in land–atmosphere interactions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

A Machine Learning Correction Model of the Winter Clear-Sky Temperature Bias over the Arctic Sea Ice in Atmospheric Reanalyses

Atmospheric reanalyses are widely used to estimate the past atmospheric near-surface state over sea ice. They provide boundary conditions for sea ice and ocean numerical simulations and relevant information for studying polar variability and anthropogenic climate change. Previous research revealed the existence of large near-surface temperature biases (mostly warm) over the Arctic sea ice in the current generation of atmospheric reanalyses, which is linked to a poor representation of the snow over the sea ice and the stably stratified boundary layer in the forecast models used to produce the reanalyses. These errors can compromise the employment of reanalysis products in support of polar research. Here, we train a fully connected neural network that learns from remote sensing infrared temperature observations to correct the existing generation of uncoupled atmospheric reanalyses (ERA5, JRA-55) based on a set of sea ice and atmospheric predictors, which are themselves reanalysis products. The advantages of the proposed correction scheme over previous calibration attempts are the consideration of the synoptic weather and cloud state, compatibility of the predictors with the mechanism responsible for the bias, and a self-emerging seasonality and multidecadal trend consistent with the declining sea ice state in the Arctic. The correction leads on average to a 27% temperature bias reduction for ERA5 and 7% for JRA-55 if compared to independent in situ observations from the MOSAiC campaign (respectively, 32% and 10% under clear-sky conditions). These improvements can be beneficial for forced sea ice and ocean simulations, which rely on reanalyses surface fields as boundary conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Surface Atmosphere Integrated Field Laboratory

To help improve understanding and modeling of processes connected to mountain hydrology, the Atmospheric Radiation Measurement (ARM) user facility will operate the Surface Atmosphere Integrated Field Laboratory (SAIL) field campaign in central Colorado. From September 2021 to June 2023, an ARM Mobile Facility will collect measurements with a focus on the 300-square-kilometer (116-square-mile) East River Watershed within the Upper Colorado River Basin. SAIL will combine atmospheric measurements from ARM, a U.S. Department of Energy (DOE) scientific user facility, with existing surface and subsurface data from partner research organizations. Researchers will develop detailed measurements of mountainous water-cycle processes as they pertain to the Colorado River, which supplies water for 40 million people in the American West. Through SAIL, researchers from DOE national laboratories, universities, and research centers and agencies will enable an atmosphere-through-bedrock understanding of mountainous water cycles. By observing what is happening above and below ground to influence hydrology at various scales across the East River Watershed, SAIL will provide insights into how Upper Colorado River watersheds interact with the atmosphere to produce water.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Experimental Investigation of Nanosecond and Subnanosecond Pulsed DBD in Atmospheric Air: Fast Imaging and Spectroscopy

Dielectric barrier discharge (DBD), as an easy and simple way of generation of non-thermal plasma, has found a number of applications in variuos fields. However, development of a homogeneous, or uniform, DBD that would operate at atmospheric pressure conditions in atmospheric air, would open a number of new applications in various fields from thin film coatings to plasma medicine. Unfortunately, at atmospheric pressure, a uniform DBD can be easily transformed into a filamentary dielectric DBD; therefore some serious issues arise, such as gas heating due to strong discharges in the random microdischarge channel and non-uniform energy distribution, which adversely affect applications. These issues traditionally are solved by the use of an appropriate working gas composition, an alternating current driving frequency, lowering of gas pressure, etc. The transitions between discharge modes in the same experimental conditions have been thoroughly investigated in nitrogen, rare gases and their mixtures with air and other gases. In many cases (for example, in plasma medicine), these methods, especially those related to gas composition and pressure, may not be applied in a convenient manner. Recent advances in pulsed power technology permitted application of much faster voltage rise times (including the subnanosecond range) and short (few nanoseconds) pulses, and revealed that uniform DBD can, in fact, be generated in atmospheric air. Such discharges are in the great interest for many applications, however to date there still little understanding of the mechanisms of their operation and characteristics. Currently, there is no adequate model of the uniform dielectric barrier discharge development in atmospheric air. Although extensive studies have been performed on understanding of the nature of the pulsed DBD uniformity, until now there is still little understanding of the mechanism of the DBD transition from the filamentary mode to uniform mode. One of the reasons for this is that development of streamers, and later – filaments, occurs on the sub-nanosecond and nanosecond time scales, and therefore requires imaging and other diagnostic techniques with corresponding speed of registration. Recently developed technologies allow such studies. Here we demonstrate that DBD uniformity strongly depends on applied electric field in the discharge gap. More specifically, the discharge uniformity may be achieved in the case when two conditions are satisfied: (1) stong overvoltage in the discharge gap (provided by fast rise times), when anode-directed streamers are formed, and (2) short pulse duration that prevents discharge overheating due to rising conductivity (current) which leads to formation of filaments. We show that by controlling the applied (global) electric field in ns-pulsed DBD, it is possible to control the uniformity of the discharge. In addition, this offers better control of the discharge chemistry due to local changes of electric fields and therefore electron energy distribution function.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

2021 Annual Report: Atmospheric Radiation Measurement

In fiscal year 2021 (FY2021), the COVID-19 pandemic continued to have an impact on activities within the Atmospheric Radiation Measurement (ARM) user facility. Travel was limited, which affected field activities and forced the continuation of virtual meetings. However, the ability to travel expanded significantly through the year, bringing some return to normalcy, and throughout the year, there was a great deal of activity dedicated to advancing the facility. Because of COVID, ARM twice delayed the TRacking Aerosol Convection interactions ExpeRiment (TRACER) in the Houston, Texas, area. Originally planned to launch in the spring, TRACER started October 1, 2021, one month after the Surface Atmosphere Integrated Field Laboratory (SAIL) campaign began near Crested Butte, Colorado. ARM teams worked onsite and remotely to make sure both campaigns could launch on this new schedule that was set early in the year. Data from SAIL and TRACER will be critical to improving earth system models, each contributing to different sets of issues. SAIL measurements will provide insights into how precipitation forms and water travels through the Upper Colorado River Basin. TRACER scientists want to know whether tiny atmospheric particles can influence the severity of thunderstorms. In October 2020, the Multidisciplinary Drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition ended after 13 months. MOSAiC data from ARM and other organizations are already helping scientists better understand how ice, atmosphere, and ocean systems are connected in the central Arctic. This report discusses some early investigations from MOSAiC, along with other ARM campaigns and activities generating prolific research. In this report, you will also learn how research activities moved forward during the pandemic at ARM’s fixed-location atmospheric observatories. There were important science applications from measurements across the facility. ARM spent a significant amount of FY2021 looking back—and ahead. In November 2020, ARM had its Triennial Review. This review is held every three years to evaluate ARM’s effectiveness in science, operations, and management. Overall, the reviewers had positive feedback regarding the breadth and impact of science activities using ARM data and the way ARM strives to meet changing user needs. The reviewers also provided some recommendations for strengthening ARM going forward. Incorporating feedback from the review, we finalized an updated Decadal Vision document that will help guide ARM priorities in the coming years. This report describes the four themes driving ARM’s Decadal Vision.

54 ENVIRONMENTAL SCIENCES↗