Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACTIVATION ENERGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Effects of Ti-Based Additives on the Hydrogen Storage Properties of a L i B H 4 / C a H 2 Destabilized System

The hydrogen storage properties of a destabilized LiBH 4 / CaH 2 system ball-milled with TiCl 3 , TiF 3 , and TiO 2 additives have been investigated. It is found that the system with TiCl 3 additive has a lower dehydrogenation temperature than the ones with other additives. Further study shows that a higher amount of TiCl 3 is more effective in reducing the desorption temperature of the LiBH 4 / CaH 2 system, since it leads to a lower activation energy of dehydrogenation. The activations energies for mixtures containing 4, 10, and 25 mol% of TiCl 3 are 141, 126, and 110 kJ/mol, respectively. However, the benefits of higher amounts of TiCl 3 are offset by a larger reduction in hydrogen capacity of the mixtures.

Yang, Hongwei↗

An investigation of the kinetics of hydrogen chemisorption on iron metal surfaces

The isothermal kinetics of H2, H2S, and O2 chemisorption onto epitaxially grown (III) oriented Fe films were studied. The measurements were made using the techniques of chemisorption induced resistance change and Auger electron spectroscopy (for adsorbed sulfur and oxygen). Also the origin of the chemisorption induced resistance change for these systems and its applicability to kinetic measurements were established. The chemisorption kinetics were interpreted as dissociative chemisorption via an adsorbed molecular species. The applicable rate constants were established. In none of the studies were the rate constants observed to be coverage dependent. By comparing the temperature dependence of the rate constants with absolute rate theory, the binding energies and activation energies of all the kinetic processes were obtained for the H2/Fe system. The initial sticking coefficient was pressure dependent for both the H2/Fe and H2S/Fe systems. This results from the step between the adsorbed molecular state and the dissociated chemisorbed state being the rate limiting step for absorption at certain pressures and temperatures. Estimates were obtained for the temperature dependence of the rate constants for the O2/Fe system.

Shanabarger, M. R.↗

Thermochemistry and Reaction Barriers for the Formation of Levoglucosenone from Cellobiose

Cellobiose jumps the barrier: High-level quantum mechanical studies show that the ether bond cleavage in cellobiose occurs through internal hydrogen transfer in the gas phase and that the activation energy required is similar to that required for activating cellulose. The reaction barriers are computed for various pathways for the formation of levoglucosenone from levoglucosan, and the most likely pathway requires a relatively low activation barrier compared to that for the activation of cellobiose.

59 BASIC BIOLOGICAL SCIENCES↗

Intrinsic Hole Migration Rates in TiO2 from Density Functional Theory

Migration and formation of hole polarons in bulk rutile and anatase TiO2 were modeled using density functional theory. We previously applied a similar method to model electron polarons and extended the approach to hole polarons. Holes were formed by removal of an O(2p) valence electron, and their quantum mechanical characterization (reorganization energy and electronic coupling) was performed with the DFT+U method, a method that corrects for the self-interaction errors and facilitates charge localization, combined with cluster calculations. We found that activation energies for hole hopping are about twice as large as those for electron hopping, in agreement with experiment. Activation energies typically vary in the range of 0.5 and 0.6 eV. We found that most of the hole hopping processes are adiabatic in rutile but non-adiabatic in anatase. Lattice distortions around hole polarons are also about twice as large as distortions around electron polarons. Our results show that holes are thermodynamically more stable in the rutile phase, while electrons are more stable in the anatase phase. A hole trapping site with hemi-bond structure (hole charge shared between two non-bonded oxygen sites) was identified in anatase as the result of the electronic coupling between the initial and final states being so large that the trapping structure corresponds to a hole delocalized between two oxygen atoms. We also modeled the formation of hole and electron polarons at the (110) surface. The activation energy for hole transfer on the surface is about 0.07 eV larger than in the bulk, while the activation energy for electron transfer on the surface is about 0.11 eV larger than in the bulk. These results form the basis for further development of models to describe polaron transport in TiO2 structures such as surfaces, interfaces, or non-perfect crystals. Funding was provided by the Department of Energy, Office of Basic Energy Sciences. Computational resources were provided by the Molecular Science Computing Facility located at the Environmental Molecular Science Laboratory in Richland, WA. All work was performed at Pacific Northwest National Laboratory (PNNL). Battelle operates PNNL for the U.S. Department of Energy.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Solar Wind Implantation into Lunar Regolith: Hydrogen Retention in a Surface with Defects

Solar wind protons are implanted directly into the top 100 nm of the lunar near-surface region, but can either quickly diffuse out of the surface or be retained, depending upon surface temperature and the activation energy, U, associated with the implantation site. In this work, we explore the distribution of activation energies upon implantation and the associated hydrogen-retention times; this for comparison with recent observation of OH on the lunar surface. We apply a Monte Carlo approach: for simulated solar wind protons at a given local time, we assume a distribution of U values with a central peak, U(sub c) and width, U(sub w), and derive the fraction retained for long periods in the near-surface. We find that surfaces characterized by a distribution with predominantly large values of U (greater than 1 eV) like that expected at defect sites will retain implanted H (to likely form OH). Surfaces with the distribution predominantly at small values of U (less than 0.2 eV) will quickly diffuse away implanted H. However, surfaces with a large portion of activation energies between 0.3 eV less than U less than 0.9 eV will tend to be H-retentive in cool conditions but transform into H-emissive surfaces when warmed (as when the surface rotates into local noon). These mid-range activation energies give rise to a diurnal effect with diffusive loss of H at noontime.

regolith↗

Compression and Tensile Creep of Binary NiAl

Compression creep and long term tensile creep studies were conducted on cast and extruded binary NiAl in the temperature range 700-1200 K with the objectives of characterizing and understanding the creep mechanisms. Inverse and normal primary creep curves were observed in both compression and tension creep depending on stress and temperature although an asymmetrical response was observed under these two stress states. It was concluded that the primary creep of NiAl is limited by dislocation mobility. The stress exponents, n, for compression and tensile creep were similar varying between about 5 and 14. However, there were significant differences in the stress dependence of the activation energies for compression and tensile creep. The true activation energy for tensile creep, Q(sub c), was constant and equal to about 400 kJ/mol between 20 and 50 MPa but decreased to a constant value of 250 kJ/mol between 50 and 110 MPa. The activation energy was observed to be inversely stress dependent above 110 MPa. In contrast, Q(sub c) = 300 kJ/mol for compression creep was constant between 25 and 70 MPa and inversely dependent on the true stress above 70 MPa. A detailed discussion of the probable dislocation creep mechanisms governing compressive and tensile creep of NiAl is presented. It is concluded that the non-conservative motion of jogs on screw dislocations influenced the nature of the primary creep curves, where the climb of these jogs involves either the next nearest neighbor or the six-jump cycle vacancy diffusion mechanism. The probable natures of the atom-vacancy exchange that occur within the core of an edge dislocation undergoing climb in NiAl are schematically examined.

Raj, Sai V.↗

Deciphering the Mechanistic Role of Individual Oxide Phases and Their Combinations in Supported Mn–Na 2 WO 4 Catalysts for Oxidative Coupling of Methane

Oxidative coupling of methane (OCM) is an attractive direct route for upgrading methane to valuable chemicals. In this study, Temporal Analysis of Products (TAP) and steady state experiments are conducted to understand the role of individual oxide phases and their combinations in supported Mn-Na 2 WO 4 /SiO 2 catalysts for OCM. The results from TAP transient kinetic studies indicate that Mn plays an important role in promoting gas phase oxygen activation, while NaO x /SiO 2 and WO x /SiO 2 are relatively inert towards gas phase oxygen and methane activation. However, the supported catalyst combining Na and W in the form Na 2 WO 4 show enhanced gas phase oxygen activation exhibiting a much lower oxygen activation energy (148 kJ/mol) and enhanced activity toward methane activation as compared to the individual supported oxide catalysts. Addition of Mn to Na 2 WO 4 /SiO 2 further decreases the oxygen activation energy by 40 kJ/mol. Moreover, methane activation is also enhanced with CH 3 as the main intermediate but, with increasing Mn content, more CH 2 intermediates are observed. Different forms of oxygen (both dioxygen and atomic) are detected on the catalyst surface using isotopic pump/probe pulsing and their distribution is found to depend on the catalyst composition. An optimal Mn content in the Na 2 WO 4 /SiO 2 catalyst system is needed to enhance the amount of dioxide surface species (e.g., superoxide 16 O 2 - or peroxide 16 O 2 2- ) associated with the Na 2 WO 4 leading to high C 2 selectivity for OCM. When the Mn content is too high, the larger MnOx domains are shown to contribute to the formation of higher concertation of monoxide surface species that lead to nonselective OCM pathways. This insight from transient kinetic characterization using TAP combined with conventional steady state studies, provides a deeper understanding of the role of individual oxide phases and their combination on supported catalysts toward the formation of intermediate surface species and their impact on the OCM reaction mechanism. This knowledge is critical toward designing superior catalyst formulations for OCM.

10 SYNTHETIC FUELS↗

Defect production in strained p-type Si{sub 1-x}Ge{sub x} by Er implantation

Strained p-Si{sub 1-x}Ge{sub x} (x=5.3%, 10.2%, and 15.4%) was irradiated at room temperature with 160 keV {sup 166}Er{sup 2+} ions to a fluence of 1x10{sup 10} or 3x10{sup 13} Er/cm{sup 2}. The defects induced by ion implantation were investigated experimentally using high-resolution x-ray diffraction, Rutherford backscattering and channeling spectroscopy, and deep level transient spectroscopy. X-ray diffraction indicates that the damage induced by Er implantation produces a slight perpendicular expansion of the SiGe lattice. For all compositions, channeling measurements reveal that Er implantation in p-Si{sub 1-x}Ge{sub x} to a fluence of 3x10{sup 13} Er/cm{sup 2} induces an amorphous region below the Si{sub 1-x}Ge{sub x} surface. Annealing at 850 deg. C for 30 s, results in a reduction in damage density, a relaxation of the implantation-induced perpendicular expansion of the SiGe lattice in the implanted region, while a more pronounced relaxation of the compressive strain SiGe is observed for higher Ge content (x=0.10 and 0.15). On the other hand, for the annealed SiGe samples that were implanted with Er at the fluence of 10{sup 10} Er/cm{sup 2}, the compressive strain in the SiGe layer is nearly completely retained. Deep level transient spectroscopy studies indicate that two prominent defects with discrete energy levels above the valence band are introduced during Er implantation. Their activation energy was found to decrease with increasing Ge content. However, the relatively large local strain induced by high fluence Er implantation reduces the activation energy by 40 meV with respect to the low fluence Er implanted p-Si{sub 1-x}Ge{sub x}. This shift (40 meV) in the activation energy remains constant regardless of the Ge content, suggesting that the Si{sub 1-x}Ge{sub x} layers remained fully strained after Er implantation. The observed defects are further compared to those introduced by alpha particle irradiation and electron beam metal deposition. The results indicate that defects introduced by Er implantation have similar electronic properties as those of defects detected after electron beam deposition and alpha particle irradiation. Therefore, it is concluded that these defects are due to the Er implantation-induced damage and not to the Er species specifically.

36 MATERIALS SCIENCE↗

Investigating temperature degradation in THz quantum cascade lasers by examination of temperature dependence of output power

In this paper, we demonstrate a method to investigate the temperature degradation of THz quantum cascade lasers (QCLs) based on analyzing the dependence of lasing output power on temperature. The output power is suggested to decrease exponentially with some characteristic activation energy indicative of the degradation mechanism. As a proof of concept, Arrhenius plots of power versus temperature are used to extract the activation energy in vertical transition THz QCLs. The extracted energies are consistent with thermally activated longitudinal optical-phonon scattering being the dominant degradation mechanism, as is generally accepted. The extracted activation energy values are shown to be in good agreement with the values predicted from laser spectra.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hydrogen uptake in graphite matrix at high temperature

Tritium management is a critical challenge for the next generation of nuclear reactors, such as Fluoride Salt Cooled High Temperature Reactors (FHRs) and High Temperature Gas-cooled Reactors (HTGRs), due to the higher production rate (up to 10,000 times) than conventional Light Water Reactors (LWRs). Graphitic materials employed as moderator, reflector, and fuel pebbles offer a potential pathway for tritium recovery by serving as a sink for tritium. Prediction of uptake capacity under reactor relevant conditions remains a challenge due to a lack of low partial pressure data and significant inter-grade variability of graphite. This study addresses these gaps by providing a comprehensive characterization of hydrogen (as a tritium surrogate) uptake and release behavior in the A3-3 graphite matrix (GM) used in fuel pebbles. Uptake measurements are performed at reactor relevant temperatures of 600- 800 °C, 1-200 Torr hydrogen pressure, and 15-120 min equilibration time, followed by thermal desorption spectroscopy up to 1100 °C. Uptake experiments at different equilibration times demonstrate the role of kinetics in hydrogen uptake, which can be modeled as a diffusion-with-trapping process. In the thermodynamics limit, the Sips adsorption model is shown to capture the uptake in A3-3 GM well. Our campaign provides a set of new results for hydrogen uptake in A3-3, including limiting uptake capacity at 600 °C, apparent diffusion coefficient at 600 °C, and the first estimates of the FHR/HTGR relevant (600 °C, 20 Pa partial pressure) equilibrium uptake capacity and time to saturation. Desorption data highlights a new site for hydrogen uptake, not observed in nuclear graphite, which we attribute to the non-graphitized binder. Using the Kissinger method, we estimate activation energy for release from the desorption peaks, confirming the activation energy for release from the basal planes and providing the first estimate for the activation energy of release from the binder.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Generalized Brønsted‐Evans‐Polanyi Relationships for Reactions on Metal Surfaces from Machine Learning

Abstract Brønsted‐Evans‐Polanyi (BEP) relationships, i. e., a linear scaling between reaction and activation energies, lie at the core of computational design of heterogeneous catalysts. However, BEPs are not general and often require reparameterization for each class of reactions. Here we construct generalized BEPs (gBEPs), which can predict activation energies for a diverse dataset of reactions of C, O, N and H containing molecules on metal surfaces. In a first step we develop a set of descriptors based on scaling relationships that can capture the change in chemical identity of reactants during the reaction. Subsequently, we use the reaction energy, these descriptors and a single descriptor for the surface structure to parameterize machine learning based regression approaches for the prediction of activation energies. The best approach we developed shows a Mean Absolute Error (MAE) of 0.11 eV for the training set (80 % of the data set) and 0.23 eV for the test set (20 % of the data set). The methodology presented here allows to calculate activation energies within fractions of seconds on a typical personal computer and due to its generality, accuracy and simplicity in application it might prove to be useful in transition metal catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interstitial hydrogen enhances the mobility of some grain boundaries in tungsten

Segregation of interstitials at a grain boundary (GB) is known to generally lower its mobility. This phenomenon, called 'solute-drag', has important ramifications on the process of recrystallization and microstructural evolution. Here, we present predictions from molecular dynamics (MD) simulations which demonstrate that interstitial hydrogen in tungsten can in fact increase the mobility of some GBs which exhibit shear coupling. Assuming a disconnection-based mechanism, activation energies and pre-factors for disconnection nucleation are predicted from simulations of shear-coupled motion. In GBs where enhanced mobility is predicted, interstitial H reduces both the activation energy and the pre-factor for disconnection nucleation, thus effectively increasing the mobility. For GBs with diminished mobility, MD predicts that presence of interstitial H reduces the pre-factor and, in some cases, increases the activation energy. The reduction in the activation energy inferred from MD simulations are confirmed by nudged elastic band calculations. Temperature-dependent structural transitions are observed for some GBs, and the effect of interstitial H is found to change with the changes in structure. The effect of interstitial H is predicted to be complex and highly variable, providing some plausible explanations for experimental observations on the recrystallization of tungsten in presence of H-loaded plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Entropy-scaling laws for diffusion coefficients in liquid metals under high pressures

Molecular dynamic simulations on the liquid copper and tungsten are used to investigate the empirical entropy-scaling laws D{sup *}=A exp(BS{sub ex}), proposed independently by Rosenfeld and Dzugutov for diffusion coefficient, under high pressure conditions. We show that the scaling laws hold rather well for them under high pressure conditions. Furthermore, both the original diffusion coefficients and the reduced diffusion coefficients exhibit an Arrhenius relationship D{sub M}=D{sub M}{sup 0} exp(−E{sub M}/K{sub B}T), (M=un,R,D) and the activation energy E{sub M} increases with increasing pressure, the diffusion pre-exponential factors (D{sub R}{sup 0} and D{sub D}{sup 0}) are nearly independent of the pressure and element. The pair correlation entropy, S{sub 2}, depends linearly on the reciprocal temperature S{sub 2}=−E{sub S}/T, and the activation energy, E{sub S}, increases with increasing pressure. In particular, the ratios of the activation energies (E{sub un}, E{sub R}, and E{sub D}) obtained from diffusion coefficients to the activation energy, E{sub S}, obtained from the entropy keep constants in the whole pressure range. Therefore, the entropy-scaling laws for the diffusion coefficients and the Arrhenius law are linked via the temperature dependence of entropy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Kinetics of calcium sulfoaluminate formation from tricalcium aluminate, calcium sulfate and calcium oxide

The formation kinetics of tricalcium aluminate (C{sub 3}A) and calcium sulfate yielding calcium sulfoaluminate (C{sub 4}A{sub 3}$) and the decomposition kinetics of calcium sulfoaluminate were investigated by sintering a mixture of synthetic C{sub 3}A and gypsum. The quantitative analysis of the phase composition was performed by X-ray powder diffraction analysis using the Rietveld method. The results showed that the formation reaction 3Ca{sub 3}Al{sub 2}O{sub 6} + CaSO{sub 4} → Ca{sub 4}Al{sub 6}O{sub 12}(SO{sub 4}) + 6CaO was the primary reaction < 1350 °C with and activation energy of 231 ± 42 kJ/mol; while the decomposition reaction 2Ca{sub 4}Al{sub 6}O{sub 12}(SO{sub 4}) + 10CaO → 6Ca{sub 3}Al{sub 2}O{sub 6} + 2SO{sub 2} ↑ + O{sub 2} ↑ primarily occurred beyond 1350 °C with an activation energy of 792 ± 64 kJ/mol. The optimal formation region for C{sub 4}A{sub 3}$ was from 1150 °C to 1350 °C and from 6 h to 1 h, which could provide useful information on the formation of C{sub 4}A{sub 3}$ containing clinkers. The Jander diffusion model was feasible for the formation and decomposition of calcium sulfoaluminate. Ca{sup 2+} and SO{sub 4}{sup 2−} were the diffusive species in both the formation and decomposition reactions. -- Highlights: •Formation and decomposition of calcium sulphoaluminate were studied. •Decomposition of calcium sulphoaluminate combined CaO and yielded C{sub 3}A. •Activation energy for formation was 231 ± 42 kJ/mol. •Activation energy for decomposition was 792 ± 64 kJ/mol. •Both the formation and decomposition were controlled by diffusion.

36 MATERIALS SCIENCE↗

Isochronal annealing study of X-ray induced defects in single- and double-walled carbon nanotubes

X-ray induced defects in single-walled (SWCNTs) and double-walled carbon nanotubes (DWCNTs) were characterized by Raman scattering spectroscopy. Frenkel defects, interstitial-vacancy pairs, were revealed to form in both SWCNTs and DWCNTs after X-ray irradiation because these defects were entirely healed by thermal annealing. In order to clarify the structure of the X-ray induced defect in SWCNT and DWCNT, isochronal-annealing experiments were performed on the irradiated samples and the activation energy for defect healing was estimated. The intensity of D band (defect induced band) on Raman spectra was used as a measure of the density of X-ray induced defects. The experimental results were in good agreement with the simulated values using second order reaction model, which indicated that the defect healing was determined by the migration energy of interstitials on the carbon layer. We also found that the activation energy for defect healing of SWCNT and DWCNT were around 0.5 eV and 0.32 eV, respectively. The X-ray induced defects in SWCNTs were more stable than those in DWCNTs. Compared these estimated activation energies to previous theoretical reports, we concluded that bridge and/or dumbbell interstitials are formed in both SWCNT and DWCNT by X-ray irradiation.

36 MATERIALS SCIENCE↗

Defect identification based on first-principles calculations for deep level transient spectroscopy

Deep level transient spectroscopy (DLTS) is used extensively to study defects in semiconductors. We demonstrate that great care should be exercised in interpreting activation energies extracted from DLTS as ionization energies. We show how first-principles calculations of thermodynamic transition levels, temperature effects of ionization energies, and nonradiative capture coefficients can be used to accurately determine actual activation energies that can be directly compared with DLTS. Our analysis is illustrated with hybrid-functional calculations for two important defects in GaN, which have similar thermodynamic transition levels and shows that the activation energy extracted from DLTS includes a capture barrier that is temperature dependent, unique to each defect, and, in some cases, large in comparison to the ionization energy. By calculating quantities that can be directly compared with the experiment, first-principles calculations thus offer powerful leverage in identifying the microscopic origin of defects detected in DLTS.

Activation energies↗

Energetics, diffusion, and magnetic properties of cobalt atom in a monolayer graphene: An ab initio study

We use ab initio methods to study the binding, diffusion, and magnetic properties of cobalt atom embedded in graphene vacancies. We investigate the diffusion of Co-monovacancy (Co-MV) and Co-divacancy (Co-DV) defect complexes, and determine the minimum energy path (MEP), as well as the activation energy barrier of migration. We obtained similar activation energy barriers, of ∼5.8 eV, for Co-MV and Co-DV diffusion, respectively. Our calculations also suggest that, at electron–irradiation energy of 200 keV as used in a related experiment, the maximum energy transfer to the Co atom, of approximately 9.0 eV is sufficiently high to break metal-carbon bonding. The incident electron energy is also high enough to displace graphene's carbon atoms from their lattice positions. The breaking of metal-carbon bonding and the displacement of graphene atoms may act to facilitate the migration of Co. We conclude therefore that the detrapping and diffusion of cobalt as observed experimentally is likely to be radiation-induced, similar to what has been observed for Au and Fe in electron-irradiated graphene. Furthermore, we show that Co migration in graphene is such that its magnetic moment varies along the diffusion path. The magnetic moment of Co is consistently higher in Co-DV diffusion when compared to that of Co-MV diffusion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗