Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “2D atomic crystals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Hard Ferromagnetism Down to the Thinnest Limit of Iron-Intercalated Tantalum Disulfide

Two-dimensional (2D) magnetic crystals hold promise for miniaturized and ultralow power electronic devices that exploit spin manipulation. In these materials, large, controllable magnetocrystalline anisotropy (MCA) is a prerequisite for the stabilization and manipulation of long-range magnetic order. In known 2D magnetic crystals, relatively weak MCA typically results in soft ferromagnetism. Furthermore, we demonstrate that ferromagnetic order persists down to the thinnest limit of Fe x TaS 2 (Fe-intercalated bilayer 2H-TaS 2 ) with giant coercivities up to 3 T. We prepare Fe-intercalated TaS 2 by chemical intercalation of van der Waals-layered 2H-TaS 2 crystals and perform variable-temperature transport, transmission electron microscopy, and confocal Raman spectroscopy measurements to shed new light on the coupled effects of dimensionality, degree of intercalation, and intercalant order/disorder on the hard ferromagnetic behavior of Fe x TaS 2 . More generally, we show that chemical intercalation gives access to a rich synthetic parameter space for low-dimensional magnets, in which magnetic properties can be tailored by the choice of the host material and intercalant identity/amount, in addition to the manifold distinctive degrees of freedom available in atomically thin, van der Waals crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1998

Modeling the Growth Rates of Tetragonal Lysozyme Crystal Faces

The measured macroscopic growth rates of the (110) and (101) faces of tetragonal lysozyme show an unexpectedly complex dependence on the supersaturation. The growth rates decay asymptotically to zero when the supersaturation is lowered to zero and increase rapidly when the supersaturation is increased. When supersaturations are increased still further the growth rates attain a maximum before starting to decrease. However, growth of these crystals is known to proceed by the classical dislocation and 2D nucleation growth mechanisms. This anomaly can be explained if growth is assumed to occur not by monomer units but by lysozyme aggregates. Analysis of the molecular packing of these crystals revealed that they were constructed of strongly bonded 4(sub 3) helices, while weaker bonds were responsible for binding the helices to each other. It follows that during crystal growth the stronger bonds are formed before the weaker ones. Thus, the growth of these crystals could be viewed as a two step process: aggregate growth units corresponding to the 4(sub 3) helix are first formed in the bulk solution by stronger intermolecular bonds and then attached to the crystal face by weaker bonds on dislocation hillocks or 2D islands. This will lead to a distribution of aggregates in the solution with monomers and lower order aggregates being predominant at low supersaturations and higher order aggregates being predominant at high supersaturations. If the crystal grows mostly by higher order aggregates, such as tetramers and octamers, it would explain the anomalous dependence of the growth rates on the supersaturation. Besides the analysis of molecular packing, a comprehensive analysis of the measured (110) and (101) growth rates was also undertaken in this study. The distribution of aggregates in lysozyme nutrient solutions at various solution conditions were determined from reversible aggregation reactions at equilibrium. The supersaturation was defined for each aggregate species with respect to its concentration at saturation in order to apply growth rate models to this process. The measured growth rates were then compared with the predicted ones from several dislocation and 2D nucleation growth models, employing tetramer and octamer growth units in polydisperse solutions and monomer units in monodisperse solutions. For the (110) face, the calculations consistently showed that the measured growth rates followed the expected model relations with octamer growth units. For the (101) face, it is not possible to obtain a clear agreement between the predicted and measured growth rates for a single growth unit as done for the (110) face. However, the calculations do indicate that the average size of the growth unit is between a tetramer and an octamer. This suggests that tetramers, octamers and other intermediate size growth units all participate in the growth process for this face. These calculations show that it is possible to model the macroscopic protein crystal growth rates if the molecular level processes can be account for, particularly protein aggregation processes in the bulk solution. Our recent investigations of tetragonal lysozyme crystals employing high resolution atomic force microscopy scans have further confirmed the growth of these crystals by aggregate growth units corresponding to 4(sub 3) helices.

Li, Meirong↗
DOE OSTI2024

INSPIRED: Inelastic neutron scattering prediction for instantaneous results and experimental design

Inelastic neutron scattering (INS) has unique advantages in probing how atoms vibrate and how the vibrations propagate and interact. Such dynamic information is crucial in understanding various material properties, from heat capacity, thermal conductivity, phase transitions, and chemical reactions to more exotic quantum behavior. The analysis and interpretation of the INS spectra often start from a model structure of the sample, followed by a series of calculations to obtain the simulated spectra to compare with experiments. The conventional way to perform such calculations usually requires significant time, computing resources, and specialized expertise. Here, we present a new program named INSPIRED (Inelastic Neutron Scattering Prediction for Instantaneous Results and Experimental Design), which enables users to perform rapid INS simulations in several different ways on their personal computers in just a few clicks, with the crystal structure as the only input file. Specifically, the users can choose a pre-trained symmetry-aware neural network (coupled with an autoencoder) to predict the phonon density of states (DOS), 1D S(E) and 2D S(|Q|,E) spectra for any given structure. One can also choose an existing density functional theory (DFT) calculation from a database (containing over 12,000 crystals), and quickly obtain the simulated INS spectra for single crystals and powders. It is also possible to use pre-trained universal machine learning force fields to relax a given crystal structure, calculate the phonon dispersion and DOS, and, subsequently, the INS spectra. All these functions are implemented with a PyQt graphic user interface. Finally, we expect these new tools will benefit broad user communities and significantly improve the efficiency of experiment design, execution, and data analysis for INS.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Realizing Kagome Band Structure in Two-Dimensional Kagome Surface States of RV 6 Sn 6 (R = Gd, Ho)

Here, we report angle resolved photoemission experiments on a newly discovered family of kagome metals RV 6 Sn 6 (R = Gd, Ho). Intrinsic bulk states and surface states of the vanadium kagome layer are differentiated from those of other atomic sublattices by the real-space resolution of the measurements with a small beam spot. Characteristic Dirac cone, saddle point, and flat bands of the kagome lattice are observed. Our results establish the two-dimensional (2D) kagome surface states as a new platform to investigate the intrinsic kagome physics.

2-dimensional systems↗
NASA NTRS1996

Preliminary Work in Obtaining Site-Directed Mutants of Hen Egg White Lysozyme

Protein crystal growth studies are recognized as a critical endeavor in the field of molecular biotechnology. The scientific applications of this field include the understanding of how enzymes function and the accumulation of accurate information of atomic structures, a key factor in the process of rational drug design. NASA has committed substantial investment and resources to the field of protein crystal growth and has conducted many microgravity protein crystal growth experiments aboard shuttle flights. Crystals grown in space tend to be larger, denser and have a more perfect habit and geometry. These improved properties gained in the microgravity environment of space result largely from the reduction of solutal convection, and the elimination of sedimentation at the growing crystal surface. Shuttle experiments have yielded many large, high quality crystals that are suitable for high resolution X-ray diffraction analysis. Examples of biologically important macromolecules which have been successfully crystallized during shuttle missions include: lysozyme, isocitrate lyase, gamma-interferon, insulin, human serum albumin and canavalin. Numerous other examples are also available. In addition to obtaining high quality crystals, investigators are also interested in learning the mechanisms by which the growth events take place. Crystallization experiments indicate that for the enzyme HEWL, measured growth rates do not follow mathematical models for 2D nucleation and dislocation-led growth of tetragonal protein crystals. As has been suggested by the laboratory of Marc L. Pusey, a possible explanation for the disagreement between observation and data is that HEWL tetraconal crystals form by aggregated units of lysozyme in supersaturated solutions. Surface measurement data was shown to fit very well with a model using an octamer unit cell as the growth unit. According to this model, the aggregation pathway and subsequent crystal growth is described by: monomer < ------ > dimer < ------- > tetramer < ------ > octamer < ------ > higher order. It is believed that multimer aggregation of lysozyme occurs by interaction at specific binding sites on the surface of the protein crystals. If the presence of discrete binding sites and the aggregation hypothesis is true, then it follows that the alteration of the binding site(s) should have significant effect on the measurements obtained during growth experiments. Site-directed mutagenesis allows the specific alteration of proteins by replacement, deletion or addition of specific amino acid residues. This report outlines the approach for this strategy and the progress made thus far toward that end.

Holmes, Leonard D.↗
DOE OSTI2020

Energetics and Structure of Nickel Atoms and Nanoparticles on MgO(100)

The growth morphology and interfacial energetics of vapor deposited Ni on the MgO(100) surface at 300 and 100 K have been studied using single crystal adsorption calorimetry (SCAC), He + low-energy ion scattering spectroscopy (LEIS), X-ray photoelectron spectroscopy (XPS), and low-energy electron diffraction (LEED). At 300 K, the Ni atoms grow as three-dimensional nanoparticles with a saturation number density of 5 × 10 16 particles/m 2 . The differential heat of adsorption at 300 K increases rapidly with coverage, from 276 (initially) to 311 kJ/mol by 0.4 ML. Thereafter, it slowly increases asymptotically to the sublimation enthalpy of bulk Ni (430 kJ/ml) by 9 ML. The Ni 2p 3/2 XPS peak binding energy at 300 K is initially (i.e., at 0.16 ML) 1.4 eV higher than that for bulk Ni(solid), but it decreases to that value at high coverage. The Ni atoms form a metastable phase at 300 K when in nanoparticles with diameter <2.5 nm, and the adhesion energy of such Ni nanoparticles to MgO(100) was found to be 3.05 J/m 2 . At 100 K, the Ni atoms form single adatoms and then 0.17 nm thick 2D islands at low coverage with fewer Ni-Ni bonds compared to the Ni nanoparticles formed at 300 K. Thus, the initial heat (i.e., for the first ~0.03 ML) is 148 kJ/mol at 100 K, 128 kJ/mol lower than at 300 K, and remains lower for the 2D islands. With increasing coverage at 100 K, the tiny 2D Ni islands grow in size to cover nearly the entire surface before thickening. Lastly, the XPS Ni 2p 3/2 peak binding energy for 0.21 ML Ni on MgO(100) at 100 K is 2.2 eV higher than that for bulk Ni(solid), suggesting charge transfer from Ni to MgO(100) and formation of Ni 2+ at very low coverage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A New Family of Ternary Intermetallic Compounds with Dualistic Atomic Ordering – The ZIP Phases

A new family of nanostructured ternary intermetallic compounds − named the ZIP phases − is introduced in this work. The ZIP phases exhibit dualistic atomic ordering, i.e., they form two structural variants: one with the fcc diamond cubic structure (space group Fd$\bar{3}$m) and one with the hexagonal structure (space group P6 3 /mmc). They are also characterized by metallic behavior, ionic bonding, and atomic zigzagging. Powder metallurgical routes involving pressure-assisted densification are adopted to demonstrate ZIP phase synthesis in the Nb-Si-Ni, Nb-Si-Co, Ta-Si-Ni, V-Si-Ni, and Nb-Si-Fe ternary systems. Crucially, reactive hot pressing is capable of producing high-purity ZIP phase materials after the judicious, elemental system-specific optimization of the processing route. Synthesis of phase-pure materials – demonstrated in the Nb-Si-Ni ternary system by the synthesis of quasi phase-pure Nb 3 SiNi 2 and Ni 3 SiNb 2 ZIP phase-based materials – is a steppingstone to the prospective exploitation of the ZIP phases. Characterization of Nb 3 SiNi 2 and Ni 3 SiNb 2 involves crystal structure determination, spatially resolved chemical analysis, and determination of select thermal, electrical, magnetic, mechanical, and physical properties. Density functional theory is used to assess the stability of Nb 3 SiNi 2 & Ni 3 SiNb 2 and derivative binary compounds at different temperatures, also exploring the exfoliation of these two ZIP phases along specific surfaces to produce 2D derivatives.

Intermetallic compounds (IMCs)↗
DOE OSTI2021

Tunable room-temperature ferromagnetism in Co-doped two-dimensional van der Waals ZnO

The recent discovery of ferromagnetism in two-dimensional van der Waals crystals has provoked a surge of interest in the exploration of fundamental spin interaction in reduced dimensions. However, existing material candidates have several limitations, notably lacking intrinsic room-temperature ferromagnetic order and air stability. Here, motivated by the anomalously high Curie temperature observed in bulk diluted magnetic oxides, we demonstrate room-temperature ferromagnetism in Co-doped graphene-like Zinc Oxide, a chemically stable layered material in air, down to single atom thickness. Through the magneto-optic Kerr effect, superconducting quantum interference device and X-ray magnetic circular dichroism measurements, we observe clear evidences of spontaneous magnetization in such exotic material systems at room temperature and above. Transmission electron microscopy and atomic force microscopy results explicitly exclude the existence of metallic Co or cobalt oxides clusters. X-ray characterizations reveal that the substitutional Co atoms form Co 2+ states in the graphitic lattice of ZnO. By varying the Co doping level, we observe transitions between paramagnetic, ferromagnetic and less ordered phases due to the interplay between impurity-band-exchange and super-exchange interactions. Our discovery opens another path to 2D ferromagnetism at room temperature with the advantage of exceptional tunability and robustness.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Two-tone Doppler cooling of radial two-dimensional crystals in a radio-frequency ion trap

We study the Doppler-cooling of radial two-dimensional (2D) Coulomb crystals of trapped barium ions in a radiofrequency trap. Ions in radial 2D crystals experience micromotion of an amplitude that increases linearly with the distance from the trap center, leading to a position-dependent frequency modulation of laser light in each ion's rest frame. We use two tones of Doppler-cooling laser light separated by approximately 100 MHz to efficiently cool distinct regions in the crystals with differing amplitudes of micromotion. This technique allows us to trap and cool more than 50 ions populating 4 shells in a radial two-dimensional crystal, where with a single tone of Doppler cooling light we are limited to 30 ions in 3 shells. Here, we also individually characterize the micromotion of all ions within the crystals, and use this information to locate the center of the trap and to determine the Matthieu parameters q x and q y .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Nearly hyperuniform, nonhyperuniform, and antihyperuniform density fluctuations in two-dimensional transition metal dichalcogenides with defects

Hyperuniform many-body systems in d-dimensional Euclidean space R d are characterized by completely suppressed (normalized) infinite-wavelength density fluctuations, and appear to be endowed with novel exotic physical properties. Recently, hyperuniform systems of disordered varieties have been observed in the context of various atomic-scale two-dimensional (2D) materials. Here, we analyze the effects of localized defects on the density fluctuations across length scales and on the hyperuniformity property of experimental samples of two-dimensional transition metal dichalcogenides. In particular, we extract atomic coordinates from time series annular dark field-scanning transmission electron microscopy (ADF-STEM) imaging data of 2D tungsten chalcogenides with the 2H structure (Te-doped 2H-WSe 2 ) showing continuous development and evolution of electron-beam induced defects, and construct the corresponding chemical-bonding informed coordination networks between the atoms. We then compute a variety of pair statistics and bond-orientational statistics to characterize the samples. At low defect concentrations, the corresponding materials are nearly hyperuniform, characterized by significantly suppressed scattering at the zero wave-number limit (omitting forward/ballistic scattering). As more defects are introduced, the (approximate) hyperuniformity of the materials is gradually destroyed, and the system becomes non-hyperuniform even when the material still contains a significant amount of crystalline regions. At high defect concentrations, the structures become antihyperuniform with diverging (normalized) large-scale density fluctuations, mimicking those typically observed at the thermal critical points associated with phase transitions. Overall, the defected materials possess varying degrees of orientation order, and there is apparently no intermediate hexatic phase emerging. To understand the observed nearly hyperuniform density fluctuations in the slightly defected materials, we construct a minimalist structural model and demonstrate that the experimental samples can be essentially viewed as perturbed honeycomb crystals with small correlated displacements and double chalcogen vacancies. Moreover, the small correlated displacements alone can significantly degrade hyperuniformity of the perfect honeycomb structure. Therefore, even a small amount of vacancies, when coupled with correlated displacements, can completely destroy hyperuniformity of the system.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Anomalous Second Harmonic Generation from Atomically Thin MnBi 2 Te 4

MnBi 2 Te 4 is a van der Waals topological insulator with intrinsic intralayer ferromagnetic exchange and A-type antiferromagnetic (AFM) interlayer coupling. Theoretically, it belongs to a class of structurally centrosymmetric crystals whose layered antiferromagnetic order breaks inversion symmetry for even layer numbers, making optical second harmonic generation (SHG) an ideal probe of the coupling between the crystal and magnetic structures. Here, we perform magnetic field and temperature dependent SHG measurements on MnBi 2 Te 4 flakes ranging from bulk to monolayer thickness. We find that the dominant SHG signal from MnBi 2 Te 4 is unexpectedly unrelated to both magnetic state and layer number. As a result, we suggest that surface SHG is the likely source of the observed strong SHG, whose symmetry matches that of the MnBi 2 Te 4 -vacuum interface. Our results highlight the importance of considering the surface contribution to inversion symmetry breaking in van der Waals centrosymmetric magnets.

2D magnets↗
DOE OSTI2024

Defect‐Free Nanowelding of Bilayer SnSe Nanoplates

Nanowelding is a bottom‐up technique to create custom‐designed nanostructures and devices beyond the precision of lithographic methods. Here, a new technique is reported based on anisotropic lubricity at the van der Waals interface between monolayer and bilayer SnSe nanoplates and a graphene substrate to achieve precise control of the crystal orientation and the interface during the welding process. As‐grown SnSe monolayer and bilayer nanoplates are commensurate with graphene's armchair direction but lack commensuration along graphene's zigzag direction, resulting in a reduced friction along that direction and a rail‐like, 1D movement that permits joining nanoplates with high precision. This way, molecular beam epitaxially grown SnSe nanoplates of lateral sizes 30–100 nm are manipulated by the tip of a scanning tunneling microscope at room temperature. In situ annealing is applied afterward to weld contacting nanoplates without atomic defects at the interface. This technique can be generalized to any van der Waals interfaces with anisotropic lubricity and is highly promising for the construction of complex quantum devices, such as field effect transistors, quantum interference devices, lateral tunneling junctions, and solid‐state qubits.

2D ferroelectrics↗
DOE OSTI2021

Elastic Properties and Deformation Mechanisms in the van der Waals Single-Crystalline Indium Selenide

The bulk van der Waals (vdW) single-crystalline indium selenide (β-InSe) displays exceptional plasticity in a layered crystalline form at both micro- and macroscale. However, the nanoscale origin of plasticity remains unclear. Herein, an atomic-level study on the deformation mechanisms of InSe by using first-principles calculations is reported. Remarkable anisotropic elasticity is observed in the vdW InSe layered crystal, and the stiffness is dramatically softened because of the vdW gap in the layered structure. The simulations capture the distinct fracture modes in the uniaxial tensile deformation, depending on the loading directions—brittle fracture in the [100] and [110] directions while ductile failure in the [001] direction. The InSe layered crystal structure exhibits superplastic deformability under uniaxial compression. Different transition pathways, including interlayer tangling, amorphization, and cross-linking, are tracked along respective deformation directions. The unprecedented plasticity of InSe layered crystals can be attributed to the phase transition coupled with interlayer gliding and cross-layer dislocation slipping. Here, this study deepens our understanding of the deformation mechanisms of layered materials at the atomistic level and provides insights into tailoring material properties for low-dimensional material design based on its deformation mechanisms.

2D materials↗
DOE OSTI2021

Mexican-hat potential energy surface in two-dimensional III 2 -VI 3 materials and the importance of entropy barrier in ultrafast reversible ferroelectric phase change

First-principles calculations reveal a Mexican-hat potential energy surface (PES) for two-dimensional (2D) In 2 Se 3 . This unique PES leads to a pseudo-centrosymmetric paraelectric β phase that resolves the current controversy between theory and experiment. We further show that while the α-to-β (ferroelectric-to-paraelectric) phase transition is fast and coherent, assisted by an in-plane shear phonon mode, a random distribution of the atoms in the trough of the PES acts as an entropy barrier against the reverse β-to-α transition. This will be the origin of the speed limitation of current In 2 Se 3 ferroelectric devices. Furthermore, if one orders the β phase (due to the formation of in-plane ferroelectric domains), the reverse transition can take place within tens of picoseconds in the presence of a perpendicular electric field. Finally, the Mexican-hat PES is a general feature for the entire family of 2D III 2 -VI 3 materials. Our finding offers a critical physical picture in controlling the ultrafast reversible phase transition in 2D In 2 Se 3 and other III 2 -VI 3 materials, which will benefit their practical industrial development for advanced ferroelectric devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Catalytic C 2 H 2 synthesis via low temperature CO hydrogenation on defect-rich 2D-MoS 2 and 2D-MoS 2 decorated with Mo clusters

Rational design of novel catalytic materials used to synthesize storable fuels via the CO hydrogenation reaction has recently received considerable attention. In this work, defect poor and defect rich 2D-MoS 2 as well as 2D-MoS 2 decorated with Mo clusters are employed as catalysts for the generation of acetylene (C 2 H 2 ) via the CO hydrogenation reaction. Temperature programmed desorption is used to study the interaction of CO and H2 molecules with the MoS 2 surface as well as the formation of reaction products. The experiments indicate the presence of four CO adsorption sites below room temperature and a competitive adsorption between the CO and H 2 molecules. The investigations show that CO hydrogenation is not possible on defect poor MoS 2 at low temperatures. However, on defect rich 2D-MoS 2 , small amounts of C 2 H 2 are produced, which desorb from the surface at temperatures between 170 K and 250 K. A similar C 2 H 2 signal is detected from defect poor 2D-MoS 2 decorated with Mo clusters, which indicates that low coordinated Mo atoms on 2D-MoS 2 are responsible for the formation of C 2 H 2 . Density functional theory investigations are performed to explore possible adsorption sites of CO and understand the formation mechanism of C 2 H 2 on MoS 2 and Mo 7 /MoS 2 . The theoretical investigation indicates a strong binding of C 2 H 2 on the Mo sites of MoS 2 preventing the direct desorption of C 2 H 2 at low temperatures as observed experimentally. Instead, the theoretical results suggest that the experimental data are consistent with a mechanism in which CHO radical dimers lead to the formation of C 2 H 2 that presents an exothermic desorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Tuning the Magnetic Properties of CrI 3 Using Ni Thin Film Deposition for Applications in Spintronic Devices

Chromium triiodide (CrI 3 ), a van der Waals magnet, has recently been shown to host Ising ferromagnetism down to the monolayer limit. It is a potentially important material in 2D magnet-based applications, such as magnetic sensors and spintronic devices. Prior studies have revealed the coexistence of two different types of interlayer magnetic coupling, the antiferromagnetic (AFM) coupling near the surface and ferromagnetic (FM) coupling in the deep bulk layers, in pristine CrI 3 crystals below the Curie temperature. In this study, we used Ni thin film deposition to tune the surface magnetic states in bulk CrI 3 . A nanometer thickness (4 nm thick) of Ni was deposited on the surface of CrI 3 using electron-beam evaporation to form a Ni/CrI 3 heterostructure. The deposited Ni thin layer forms nanoclusters that completely cover the CrI 3 surface. Magnetic states of CrI 3 before and after Ni deposition are probed by ultralow-frequency magneto-Raman spectroscopy. Instead of seeing three spin wave branches in Raman scattering below 2 T, as in pristine bulk CrI 3 , in Ni/CrI 3 , we observe only a single spin wave branch, which is softened compared to that in pristine CrI 3 and displays a Zeeman shift under an out-of-plane magnetic field up to 7 T. This observation reveals that the AFM layers on pristine CrI 3 crystal surfaces transit into FM layers, so the entire CrI 3 crystal is in the FM state after Ni deposition. First-principles calculations show that Ni atoms tend to diffuse into the CrI 3 lattice, and the FM interlayer coupling has a much lower energy than AFM coupling in the presence of Ni atoms. As a result, our studies show that the magnetic state of CrI 3 can be modified through deposition of a thin metal layer on the surface, offering a route for controlling the spin degree of freedom in van der Waals magnets.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Direct Exfoliation of Nanoribbons from Bulk van der Waals Crystals

Confinement of monolayers into quasi-1D atomically thin nanoribbons could lead to novel quantum phenomena beyond those achieved in their bulk and monolayer counterparts. However, current experimental availability of nanoribbon species beyond graphene is limited to bottom-up synthesis or lithographic patterning. Here, in this study, a versatile and direct approach is introduced to exfoliate bulk van der Waals crystals as nanoribbons. Akin to the Scotch tape exfoliation method for producing monolayers, this technique provides convenient access to a wide range of nanoribbons derived from their corresponding bulk crystals, including MoS 2 , WS 2 , MoSe 2 , WSe 2 , MoTe 2 , WTe 2 , ReS 2 , and hBN. The nanoribbons are predominantly monolayer, single-crystalline, parallel-aligned, flat, and exhibit high aspect ratios. The role of confinement, strain, and edge configuration of these nanoribbons is observed in their electrical, magnetic, and optical properties. This versatile exfoliation technique provides a universal route for producing a variety of nanoribbon materials and supports the study of their fundamental properties and potential applications.

2D materials↗
DOE OSTI2020

MoS 2 -supported Au 31 for CO hydrogenation: A first-principle study

While the basal plane of single-layer molybdenum disulphide (MoS 2 ) is inert, attempts have been made to functionalize it chemically through the creation of defects and/or addition of dopants. With nanoparticles as dopants, the authors present density functional theory-based calculations of the hydrogenation of CO on a 31-atom, bilayer Au cluster supported on single-layer MoS 2 (Au31/MoS 2 ). Not surprisingly, the adsorption and reaction of all species involved in the hydrogenation occur at the edges of the cluster—the regions at which the interaction between MoS 2 and the Au cluster is tracked to be the strongest. The authors find two possible mechanisms that lead to the formation of methanol: (1) CO* → CHO* → CH 2 O* → CH 3 O* → CH 3 OH* and (2) CO* → CHO* → HCOH* → CH2OH* → CH3OH*, where * indicates the adsorbed species. Detailed analysis of the reaction pathways, however, does not result in favoring one mechanism over the other. Rather, both mechanisms are facile. In addition, the rate-limiting step in each mechanism is found to be the formation of the formyl radical group (CO* + H* → CHO*).

2D materials↗