Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “2018 data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

A Suite of High-Resolution Atmospheric Carbon Dioxide Simulations in Support of the OCO-3 Snapshot Area Mapping (SAM) Mode Observation: PSU-WRF, CSU-OLAM and NASA GEOS

Cities and power plants are responsible more than 70% of GHG emissions. The emissions from the subnational localized sources need to be accurately quantified and properly managed in order to achieve the Paris Climate Agreement goals. The accurate estimation of these emission is also crucial for assessing the capacity of natural sinks to uptake the carbon released into the atmosphere that ultimately defines our emission allowance for the 1.5 or 2.0 degree temperature goals. New data collected by the Orbiting Carbon Observatory 3 (OCO-3) Snapshot Area Mapping (SAM) observations should provide a tremendous new opportunity for us to study CO2 emissions from targeted large localized sources, such as cities, power plants and beyond. Since 2018 (prior to the OCO-3 launch), we have studied the observational strategies for the SAM mode observation in order to collect the useful data for estimating CO2 emissions from target sources. To maximize the benefit of the SAM mode observation data for quantifying CO2 emission, it is important to define how to observe the localized sources depending on the local environmental and emission specificities. We employ a suite of state-of-the-art CO2 modeling systems, such as PSU's WRF-CO2, CSU's OLAM and NASA's GEOS models. All of these CO2 modeling systems are prescribedwith the high-resolution fuel CO2 emission estimates from the ODIAC data product to achieve realistic urban CO2 variations. We focus on cities with established ground-based observation networks, such as Los Angeles, Indianapolis, and Paris. We have examined the urban emission signal detectability in response to the influence of local background conditions that can observed by the SAM and biospheric contributions that will be a new challenge for urban emission inverse estimation. Based on the results of our simulation experiments, we plan to propose city-specific observation strategies. Upon the availability of the OCO-3 data, we will attempt to estimate city emissions using inverse models. We also developed synthetic OCO-3 data using NASA's GEOS5 model, which should be useful to assess the utility of the OCO-3 data in combination with data collected by carbon satellites in other orbits, such as NASA's OCO-2 and Japanese GOSAT-1/2. The synthetic data also provide an opportunity to study the errors due to clouds and aerosols, which have been not fully studied in the past.

Oda, Tomohiro↗
NASA NTRS2020

The Atmospheric Measurements of ICESat-2

ICESat-2 is an exciting new multi-beam, photon-counting, satellite lidar designed to acquire simultaneous high-resolution measurements of the earth's surface and atmospheric structure. Launched in September, 2018 the Advanced Topographic Lidar Altimeter System (ATLAS) on board ICESat-2 has been acquiring data continuously for nearly 1 year. The 3 laser beams comprising the atmospheric channel are providing excellent back scatter measurements that enable the retrieval of global cloud fraction, cloud and aerosol layer height, column optical depth, and blowing snow properties. Public release of the data products began with version 1in May, 2019 and continues with a significantly improved version 2 in October, 2019. This presentation will give an overview of the ICESat-2 atmospheric channel and show examples of cloud, aerosol and blowings now properties as well as comparisons of ATLAS and CALIOP measurements.

Palm, Stephen↗
NASA NTRS2021

JPSS-1 ATMS Post-launch Active Geolocation Analysis

A NOAA-20 (N20) ATMS active geolocation test was performed around Jan. 2018 with 24 pre-selected coastline crossing scenes. After comprehensive analysis of ATMS stare data and the corresponding VIIRS data, the ATMS pitch, roll and yaw pointing angle errors are found from the nadir perpendicular, the nadir oblique shallow angle, and the off-nadir perpendicular coastline crossing data, respectively. In this study, we first determine the ATMS radiometric coastline crossing time by using the ATMS radiometric count data. Since the coastline can be located anywhere within one ATMS FOV from the passive (regular scanning) geolocation data, depending on the scan starting time, it is not a valid assumption for the inflection point being the same as the coastline location. Consequently, using the passive geolocation data to validate the sensor’s on-orbit pointing angle performance is limited. After finding the ATMS radiometric coastline crossing time from the ATMS data, we compare it with the VIIRS effective time stamp (see main text). Specifically the VIIRS M3, M4 & M5 (true color) & M15 and M16 bands (thermal) data have a much smaller footprint size. Using the differences of the ATMS and VIIRS (effective) coastlines crossing times, the N20 ATMS pitch, roll and yaw pointing angle errors are found to be -0.09o, -0.24o and 0.28o, respectively. To determine ATMS geolocation properly, these on-orbit pointing errors need to be corrected, adding to the ATMS SDR Processing Coefficient Table, and passed on to the operational geolocation processing code.

Active Geolocation↗
NASA NTRSDate not supplied

Modeling Measurement Error in Dose-Response Models of Community Annoyance to Low-Noise Supersonic Flight

The primary research goal of the forthcoming NASA Quesst mission community test campaign is to collect representative community response data in support of the development of supersonic overflight noise certification standards. Beginning in 2026, NASA will fly the novel X-59 demonstrator aircraft over select communities in United States in order to demonstrate the possibility of low-noise supersonic flight over land and to collect objective measurements and subjective data on the perceptual experience of this new noise source. It is believed that a regression of a binary perceptual response (‘highly annoyed’ or ‘not’) on estimated noise levels (doses, measured in decibels) will provide a useful dose-response relationship for regulators. However, as these estimated doses will be subject to measurement error, naïve estimators of regression coefficients are inconsistent and slopes may be subject to attenuation bias. In this presentation, I contrast functional modeling of measurement error via simulation extrapolation (SIMEX) with structural Bayesian measurement error models. These methods are applied to available data collected during two NASA risk reduction studies in California in 2011 and Texas in 2018. I’ll conclude noting that in the presence of nonnegligible measurement errors, probabilities of annoyance may be overpredicted for low noise levels and underpredicted for high noise levels, therefore, methods of correcting for measurement error will be necessary to improve the utility of the dose-response relationship for policy-making purposes.

simulation↗
NASA NTRS2023

Performance of the IVS R1 and R4 Sessions

The International VLBI Service for Geodesy and Astrometry (IVS) has observed the weekly IVS-R1 (R1) and IVS-R4 (R4) series of sessions since 2002. These regular series are generally stable in the sense that the networks were designed to be similar from week to week. The uniformity of these series has allowed researchers to conduct many scientific investigations. The IVS also observes with other networks that allow continued sampling of data from all VLBI stations, but the R1 and R4 observing sessions are a dominant part of overall VLBI observing accounting for 1841 sessions out of a total of 3129 24-hour sessions from 2002.0 to 2020.0 (where the last R1 and R4 in 2019 was on December 30 and December 26, respectively). In this paper, we investigate the evolution of these series in terms of their observing networks. We also discuss the construction of the R1 and R4 networks and the scheduling of these sessions. The performance of these networks in terms of the formal precision of polar motion have improved by factors of 2–3 over the period from 2002.0 to 2018.0. UT1 precision improved by a factor of about 1.2–1.5. The main reason for this improvement is the increased size of the networks. We also discuss the effect on this improvement arising from changes in the data rate and the number of observed sources. There is some degradation in performance after 2018 that is most likely due to a decline in the number of available network stations.

Cynthia C. Thomas↗
NASA NTRS2009

NPP Clouds and the Earth's Radiant Energy System (CERES) Predicted Sensor Performance Calibration and Preliminary Data Product Performance

Continuation of the Earth Radiation Budget (ERB) Climate Data Record (CDR) has been identified as critical in the 2007 NRC Decadal Survey, the Global Climate Observing System WCRP report, and in an assessment titled Impacts of NPOESS Nunn-McCurdy Certification on Joint NASA-NOAA Climate Goals. In response, NASA, NOAA and NPOESS agreed in early 2008 to fly the final existing CERES Flight Model (FM-5) on the NPP spacecraft for launch in 2010. Future opportunities for ERB CDR continuity consist of procuring an additional CERES Sensor with modest performance upgrades for flight on the NPOESS C1 spacecraft in 2013, followed by a new CERES follow-on sensor for flight in 2018 on the NPOESS C3 spacecraft. While science goals remain unchanged for the long-term ERB Climate Data Record, it is now understood that the task of achieving these goals is more difficult for two reasons. The first is an increased understanding of the dynamics of the Earth/atmosphere system which demonstrates that rigorous separation of natural variability from anthropogenic change on decadal time scales requires higher accuracy and stability than originally envisioned. Secondly, future implementation scenarios involve less redundancy in flight hardware (1 vs. 2 orbits and operational sensors) resulting in higher risk of loss of continuity and reduced number of independent observations to characterize performance of individual sensors. Although EOS CERES CDR's realize a factor of 2 to 4 improvement in accuracy and stability over previous ERBE CDR's, future sensors will require an additional factor of 2 improvement to answer rigorously the science questions moving forward. Modest investments, defined through the CERES Science Team s 30-year operational history of the EOS CERES sensors, in onboard calibration hardware and pre-flight calibration and test program will ensure meeting these goals while reducing costs in re-processing scientific datasets. The CERES FM-5 pre-flight radiometric characterization program benefited from the 30-year operational experience of the CERES EOS sensors, as well as a stronger emphasis of radiometric characterization in the Statement of Work with the sensor provider. Improvements to the pre-flight program included increased spectral, spatial, and temporal sampling under vacuum conditions as well as additional tests to characterize the primary and transfer standards in the calibration facility. Future work will include collaboration with NIST to further enhance the understanding of the radiometric performance of this equipment prior to flight. The current effort summarizes these improvements to the CERES FM-5 pre-flight sensor characterization program, as well as modifications to inflight calibration procedures and operational tasking. In addition, an estimate of the impacts to the system level accuracy and traceability is presented.

Priestly, Kory↗
NASA NTRSDate not supplied

A Thermodynamic Paradigm for Studying Disease Vector’s Habitats & Life Cycles Using NASA’s NextGen Remote Sensing Instruments

Global public health is entering a new informational age through the use of spatial models of disease vector/host ecologies driven by the use of remotely sensed data to measure environmental and structural factors critical in determining disease vector habitats, distributions, life cycles, and host interactions. The vector habitat microclimates can be quantified in terms of the surface energy budget measured by satellites. The epidemiological equations (processes) can be adapted and modified to explicitly incorporate environmental factors and interfaces required by a specific disease and its vector/host cycle. Remote sensing can be used to measure or evaluate or estimate both environment (state functions) and interface (process functions). Remote sensing can be used to measure or evaluate or estimate both environment (state functions) and interface (process functions) defining vector habitats. The products of remote sensing can be integrated directly into the epidemiological equations to significantly enhance our understanding of disease vector’s life cycles and habitats. The next generation of NASA’s remote sensing instruments recently operational will provide a significant enhancement in our ability to study disease vector’s life cycles and habitats. Three new instruments have become operational on the International Space Station (ISS) In June 2018, ECOSTRESS (The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station), a five channel, thermal IR instrument with 70 m resolution and approximately 4-5 day repeat cycle of day/night pairs along with DESISa hyperspectral sensor system 235 channels (between 400 and 1000 nanometers), 30 m resolution, and data only being acquired on demand. In November 2018. GEDI (Global Ecosystem Dynamics Investigation). GEDI is a high-resolution laser ranging of Earth’s forests and topography. These instruments set the stage for NASA’s new global designated observables set of remote sensing measurements collecting hyperspectral and multispectral thermal data called SBG (Surface Biology Geology). The SBG is currently in the planning stage. The availability and use of level 1-4 data products generated from these ISS instruments will be discussed.

thermodynamics↗
NASA NTRS2018

System Applications Software Development and Testing for the Spaceport Command and Control System

Known as "America's Spaceport," one of Kennedy Space Center's (KSC) primary responsibilities is the successful preparation for and launch of rockets into space. KSC's Engineering Software Branch has been tasked with creating a new command and control system that will provide check-out and launch control for future rockets and spacecraft. While work on the software began several years ago, development is ongoing and the operators who use the software on a daily basis have requested several features to improve their user experience. My internship in the fall of 2018 involved developing the source code and unit tests for two of these requested features: "Display Data with Persistence" (DDP) and "Save Events Button" (SEB). DDP's primary goal is to aid with ergonomics. Currently, users must press-and-hold on the mouse button to display information about points on a data plot. Once DDP is integrated, users will have the ability to double-click on a data plot to display that same information with persistence. Independent from DDP, the SEB provides users the ability to take information about different events that occur in the control system and save that data into a simple Comma Separated File (.csv) file format for easier analysis at a future time.

Niemoeller, Samantha↗
NASA NTRS2021

Landsat Derived Bathymetry of Lakes on the Arctic Coastal Plan of Northern Alaska

The Pleistocene sand sea on the Arctic Coastal Plain (ACP) of northern Alaska is underlain by anancient sand dune field, a geological feature that affects regional lake characteristics. Many of these lakes, whichcover approximately 20 % of the Pleistocene sand sea, are relatively deep (up to 25 m). In addition to the nat-ural importance of ACP sand sea lakes for water storage, energy balance, and ecological habitat, the need forwinter water for industrial development and exploration activities makes lakes in this region a valuable resource.However, ACP sand sea lakes have received little prior study. Here, we collect in situ bathymetric data to test12 model variants for predicting sand sea lake depth based on analysis of Landsat-8 Operational Land Imager(OLI) images. Lake depth gradients were measured at 17 lakes in midsummer 2017 using a Humminbird 798ciHD SI Combo automatic sonar system. The field-measured data points were compared to red–green–blue (RGB)bands of a Landsat-8 OLI image acquired on 8 August 2016 to select and calibrate the most accurate spectral-depth model for each study lake and map bathymetry. Exponential functions using a simple band ratio (withbands selected based on lake turbidity and bed substrate) yielded the most successful model variants. For eachlake, the most accurate model explained 81.8 % of the variation in depth, on average. Modeled lake bathymetrieswere integrated with remotely sensed lake surface area to quantify lake water storage volumes, which rangedfrom 1.056×10−3to 57.416×10−3km3. Due to variations in depth maxima, substrate, and turbidity betweenlakes, a regional model is currently infeasible, rendering necessary the acquisition of additional in situ datawith which to develop a regional model solution. Estimating lake water volumes using remote sensing will fa-cilitate better management of expanding development activities and serve as a baseline by which to evaluatefuture responses to ongoing and rapid climate change in the Arctic. All sonar depth data and modeled lakebathymetry rasters can be freely accessed at https://doi.org/10.18739/A2SN01440 (Simpson and Arp, 2018) andhttps://doi.org/10.18739/A2HT2GC6G (Simpson, 2019), respectively.

Claire E Simpson↗
NASA NTRS2024

Low-Cost Sensor Performance Intercomparison, Correction Factor Development, and 2+ Years of Ambient PM2.5 Monitoring in Accra, Ghana

Particulate matter air pollution is a leading cause of global mortality, particularly in Asia and Africa. Addressing the high and wide-ranging air pollution levels requires ambient monitoring, but many low- and middle-income countries (LMICs) remain scarcely monitored. To address these data gaps, recent studies have utilized low-cost sensors. These sensors have varied performance, and little literature exists about sensor intercomparison in Africa. By colocating 2 QuantAQ Modulair-PM, 2 PurpleAir PA-II SD, and 16 Clarity Node-S Generation II monitors with a reference-grade Teledyne monitor in Accra, Ghana, we present the first intercomparisons of different brands of low-cost sensors in Africa, demonstrating that each type of low-cost sensor PM2.5 is strongly correlated with reference PM2.5, but biased high for ambient mixture of sources found in Accra. When compared to a reference monitor, the QuantAQ Modulair-PM has the lowest mean absolute error at 3.04 μg/m3, followed by PurpleAir PA-II (4.54 μg/m3) and Clarity Node-S (13.68 μg/m3). We also compare the usage of 4 statistical or machine learning models (Multiple Linear Regression, Random Forest, Gaussian Mixture Regression, and XGBoost) to correct low-cost sensors data, and find that XGBoost performs the best in testing (R2: 0.97, 0.94, 0.96; mean absolute error: 0.56, 0.80, and 0.68 μg/m3 for PurpleAir PA-II, Clarity Node-S, and Modulair-PM, respectively), but tree-based models do not perform well when correcting data outside the range of the colocation training. Therefore, we used Gaussian Mixture Regression to correct data from the network of 17 Clarity Node-S monitors deployed around Accra, Ghana, from 2018 to 2021. We find that the network daily average PM2.5 concentration in Accra is 23.4 μg/m3, which is 1.6 times the World Health Organization Daily PM2.5 guideline of 15 μg/m3. While this level is lower than those seen in some larger African cities (such as Kinshasa, Democratic Republic of the Congo), mitigation strategies should be developed soon to prevent further impairment to air quality as Accra, and Ghana as a whole, rapidly grow.

Humidity↗
NASA NTRS2018

Analyzing the Relationship between Tracking and Covariance for Satellite Collision Avoidance

This presentation will display statistical analysis performed with over 150,000 Conjunction Data Messages (CDMs) received for the Earth Observing System (EOS) Aqua, Aura and Terra satellites within the three year period of March 2015 through February 2018. The analysis performed demonstrates the relationship between the covariance of a secondary object and the amount of tracks it receives, as a function of Time to Closest Approach (TCA). The examination indicates that higher tracking frequencies result in lower uncertainties inclusively from the time the data is screened up until TCA. Further investigation displays the impacts of how additional observations of secondary objects lower their position uncertainties and what period of time prior to TCA convergence of the covariance can be expected depending on how well the objects are tracked. Data points from several recent EOS High Interest Events (HIEs) are used to exemplify this analysis.

Collision Avoidance↗
NASA NTRSDate not supplied

The ICESat-2 Mission: Land, Ocean, and Inland Water Data Products for Middle and Low Latitude Science and Applications

NASA’s Ice, Cloud, and Land Elevation Satellite (ICESat-2) is a polar orbiting mission, launched on September 15, 2018, with over two years of nearly continuous observations. The sole instrument onboard is the Advanced Topographic Laser Altimeter System (ATLAS), a micropulse, high repetition rate, six-beam, 532 nm Lidar with photon-counting technology. Although designed primarily for detecting height changes in ice caps and sea ice in the high latitudes, it continuously observes all terrain in its track including middle and low latitude regions as well, during approximately 15 orbits per day. The official ICESat-2 products include not only cryosphere data but also global high resolution parameters associated with tree canopies, land surface, oceans, and over 1.5 million inland water bodies consisting of lakes, rivers and coastal waters. This presentation provides an overview and the status of the ICESat-2 mission including: i) a summary of the salient technological features and orbit design, ii) the official ICESat-2 science data products for ice, vegetation canopy, ocean sea level, and inland water including several examples in the middle and low latitudes, iii) a list of NASA sponsored software tools for globally browsing the two year archive and for processing both the raw data and the official ICESat-2 geophysical data products, and iv) avenues for interested users to connect with the ICESat-2 Applications Program for answering questions and assistance in possibly using ICESat-2 data in your particular science or application. The overall goal is to facilitate the use of ICESat-2 data not only for science investigations but also for improved decision support applications with societal benefit. Additional ICESat-2 information, documentation and data products are publicly available at https://nsidc.org/data/icesat-2

ICESat-2↗
NASA NTRS2020

Analyzing the Impact of CryoSat-2 Ice Thickness Initialization on Seasonal Arctic Sea Ice Prediction

Twin 5-month seasonal forecast experiments are performed to predict the September 2018 minimum ice extent using the fully coupled Navy Earth System Prediction Capability (ESPC). In the control run, ensemble forecasts are initialized from the operational US Navy Global Ocean Forecasting System (GOFS) 3.1 for the ocean and sea ice but do not assimilate ice thickness data. Another set of forecasts are initialized from the same GOFS 3.1 fields but with sea ice thickness derived from CryoSat-2 (CS2). The Navy ESPC ensemble mean September 2018 minimum sea ice extent initialized with GOFS 3.1 ice thickness was over-predicted by 0.68 M sq.km (5.27 M sq.km) versus the ensemble set of forecasts initialized with CS2 ice thickness that had an error of 0.40 M sq.km (4.99 M sq.km), a 56% reduction in error. The September mean Integrated Ice Edge Error (IIEE) shows a 19% improvement for the entire Arctic with the CS2 data versus the control run. Comparison against Upward Looking Sonar (ULS) ice thickness in the Beaufort Sea reveals a lower bias and RMSE with the CS2 forecasts at all three moorings. Ice concentration at these locations is also improved, but neither set of experiments show ice free conditions as observed at moorings A and D.

time-lagged ensembles↗
NASA NTRS2018

Flood Analysis of the Thomas Flood in California Using NASA Data in a GIS

In December 2017, the Thomas Fire burned areas in Ventura and Santa Barbara Counties in California, consuming 281,893 acres (440 square miles), and becoming the largest wildfire in California history. On January 8, 2018, a winter storm made landfall in Santa Barbara County, releasing more than 5 inches of rain onto the same scarred area, causing San Ysidro and Montecito Creeks to overflow and leading to devastating flash flooding and debris flows by January 9, 2018. Several areas that were not typically prone to flooding were at risk due to the higher than usual flows in the nearby streams and creeks. The unprecedented flooding killed at least 20 people and left several others missing. NASA's Earth Observing System Data Information System (EOSDIS) manages Earth Observation satellites and the Distributed Active Archive Centers (DAACs), where the data is stored and processed. This poster presents the use of satellite data from NASA's inventory that have the potential for use in identification and analysis of forest fire risk and subsequent after-effects within a geographic information system (GIS).

science↗
NASA NTRS2022

A Central Asia Hydrologic Monitoring Dataset for Food and Water Security Applications in Afghanistan

From the Hindu Kush mountains to the Registan Desert, Afghanistan is a diverse landscape where droughts, floods, conflict, and economic market accessibility pose challenges for agricultural livelihoods and food security. The ability to remotely monitor environmental conditions is critical to support decision making for humanitarian assistance. The Famine Early Warning Systems Network (FEWS NET) Land Data Assimilation System (FLDAS) global and Central Asia data streams provide information on hydrologic states for routine integrated food security analysis. While developed for a specific project, these data are publicly available and useful for other applications that require hydrologic estimates of the water and energy balance. These two data streams are unique because of their suitability for routine monitoring, as well as for being a historical record for computing relative indicators of water availability. The global stream is available at ∼ 1-month latency, and monthly average outputs are on a 10 km grid from 1982–present. The second data stream, Central Asia (21–56°N, 30–100°E), at ∼ 1 d latency, provides daily average outputs on a 1 km grid from 2000–present. This paper describes the configuration of the two FLDAS data streams, background on the software modeling framework, selected meteorological inputs and parameters, and results from previous evaluation studies. We also provide additional analysis of precipitation and snow cover over Afghanistan. We conclude with an example of how these data are used in integrated food security analysis. For use in new and innovative studies that will improve understanding of this region, these data are hosted by U.S. Geological Survey data portals and the National Aeronautics and Space Administration (NASA). The Central Asia data described in this paper can be accessed via the NASA repository at https://doi.org/10.5067/VQ4CD3Y9YC0R (Jacob and Slinski, 2021), and the global data described in this paper can be accessed via the NASA repository at https://doi.org/10.5067/5NHC22T9375G (McNally, 2018).

Amy McNally↗
NASA NTRS2023

Sustainable Development in Algeria’s Urban Areas: Population Growth and Land Consumption

We analyzed the urban development sustainability in five major urban areas of Algeria by the standard of the UN Sustainability Development Goal indicator SDG 11.3.1, which focuses on the ratio of land consumption rate to population growth rate. We utilized the annual global artificial impervious area (GAIA) dataset to characterize land-use and population data from the two censuses carried out by the National Office of Statistics (ONS) for 2008 and 2018. We discuss the prevailing relationship between urban land consumption rate and population growth rate at the smallest territorial and population census unit scale. We confirm that the indicator SDG 11.3.1 is nonlinear and that while, for example, the wilaya of Tlemcen as a whole appears to be on a sustainable path, twenty-one of its communes are not. We found that overall, and for most of its communes, the wilaya of Oran seems to have an urban land use commensurable to its population growth, but in the wilaya of Algiers, out of fifty-seven communes, only fourteen have a tendency towards sustain-able development. However, the latter wilaya hosts the country’s capital and includes government buildings that are uninhabited but are accounted for as land consumed, and as such, the relationship between urban land consumption and population growth is biased. The wilaya of Annaba showed large discrepancies in terms of land use and population growth rates, and the evolution of these quantities is not homogenous across communes and not sustainable. In the Saharan wilaya of Ghardaia, the development is not homogeneous in all communes, with smaller communes undergoing buildup increases of more than 150% over the decade. Finally, in all communes where population growth exceeded urban land growth, there will be overcrowding, an aspect neither the SDG 11.3.1 nor the impervious surface per capita indicator captures. This result, in addition to other limitations, makes SDG 11.3.1 incomplete for the determination of the sustainable development in urban areas.

Algeria↗
NASA NTRS2023

On More than Two Decades of Celestial Reference Frame VLBI Observations in the Deep South: IVS-CRDS (1995 - 2021)

The International VLBI Service for Geodesy & Astrometry (IVS) regularly provides high-quality data to produce Earth Orientation Parameters (EOP), and for the maintenance and realization of the International Terrestrial and Celestial Reference Frames, ITRF and ICRF. The first iteration of the celestial reference frame (CRF) at radio wavelengths, the ICRF1, was adopted by the International Astronomical Union (IAU) in 1997 to replace the FK5 optical frame. Soon after, the IVS began official operations and in 2009 there was a significant increase in data sufficient to warrant a second iteration of the CRF, ICRF2. The most recent ICRF3, was adopted by the IAU in 2018. However, due to the geographic distribution of observing stations being concentrated in the Northern hemisphere, CRFs are generally weaker in the South due to there being fewer Southern Hemisphere observations. To increase the Southern Hemisphere observations, and the density, precision of the sources, a series of deep South observing sessions was initiated in 1995. This initiative in 2004 became the IVS Celestial Reference Frame Deep South (IVS-CRDS) observing program. This paper covers the evolution of the CRDS observing program for the period 1995 to 2021, details the data products and results, and concludes with a summary of upcoming improvements to this ongoing project.

VLBI↗
NASA NTRS2020

Meteoritic Material Recovered from the 07 March 2018 Meteorite Fall into the Olympic Coast National Marine Sanctuary

On 07 March 2018 at 20:05 local time (08 March 03:05 UTC), a dramatic meteor occurred over Olympic Coast National Marine Sanctuary (OCNMS) off of the Washington state coast (“OCNMS fall”, henceforth). Data to include seismometry (from both on-shore and submarine seismometers), weather radar imagery (Figure 1), and a moored weather buoy, were used to accurately identify the fall site. The site was visited by the exploration vessel E/V Nautilus (Ocean Exploration Trust) on 01 July 2018 [1] and by the research vessel R/V Falkor (Schmidt Ocean Institute) from 03-06 June 2019. Remotely operated vehicles (ROVs) from both vessels were used to search for meteorites and sample seafloor sediments. These expeditions performed the first attempts to recover meteorites from a specific observed fall in the open ocean. Analysis of weather radar data indicates that this fall was unusually massive and featured meteorites of unusually high mechanical toughness, such that large meteorites were disproportionately produced compared to other meteorite falls (Figure 2)[2-4]. We report the recovery of many (>100) micrometeorite-sized melt spherules and other fragments, and one small (~1mm3 ) unmelted meteorite fragment identified to date. Approximately 80% of the fragments were recovered from a single sample, collected from a round pit in the seafloor sediment. Melt spherules are almost exclusively type I iron-rich spherules with little discernible oxidation. Analyses are currently underway to attempt to answer the primary science question by identifying the parent meteorite type. Also, differences in the number and nature of samples collected by Nautilus and Falkor reveal a distinct loss rate to oxidation over the 15 months following the fall that is useful to inform future recovery efforts.

Fries, M.↗