Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface observations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Transmittance measurements of ultraviolet and visible wavelength filters flown aboard LDEF

A set of ten interference filters were supplied to be mounted on experiment no. A0-147 of LDEF. The results of spectral transmission measurements before delivery and after recovery are presented. Included are descriptions of the construction and materials included in the filters. Additional results from photographic microscopic and surface analytical observations are being gathered and will be presented later.

Mooney, Thomas A.↗

Albedo maps of Pluto and Charon - Initial mutual event results

By applying the technique of maximum entropy image reconstruction to invert observed lightcurves, surface maps of single-scattering albedo are obtained for the surfaces of Pluto and Charon from 1954 to 1986. The albedo features of the surface of Pluto are similar to those of the Buie and Tholen (1989) spot model maps; a south polar cap is evident. The map of Charon is somewhat darker, with single-scattering albedos as low as 0.03.

Buie, Marc W.↗

Tensile behavior of the L(1)2 compound Al67Ti25Cr8

Temperature-related variations in tensile yield strength and ductility were studied on cast, homogenized and isothermally forged Al67Ti25Cr8. Yield strength dropped discontinuously between 623 K and 773 K and then decreased gradually with increasing temperature. Below 623 K, fracture occurred prior to macroscopic yielding. Ductility decreased from 0.2 percent at 623 K to zero at 773 K, but increased again at higher temperatures. At 1073 K, an elongation of 19 percent was obtainable, and ultimate tensile strength and localized necking were observed. Fracture surfaces and deformed microstructures were examined. The 1073 K tensile specimen that exhibited 19 percent elongation showed grain boundary serrations and some evidence of recrystallization (likely dynamic) although fracture occurred predominantly via an intergranular mode.

Kumar, K. S.↗

Geophysical investigations with TOPEX/Poseidon altimetry data

In the proposed research, TOPEX/POSEIDON altimeter data will be used with Geosat and European Remote Sensing satellite (ERS-1) data to compute global, region, and local oceanic geoid surfaces. These observations will then be analyzed to conduct geophysical studies relative to the structure of the oceanic lithosphere and mantle.

Cazenave, Anny↗

Stratiform clouds and their interaction with atmospheric motion

The spatial patterns of stratocumulus cloud frequency for the continental United States and adjacent oceans were routinely obtained from surface cloud observations every six hours. These frequencies were correlated with upper air patterns at 850, 700, and 500 mb. Significant frequency maxima were found near trough axes over marine areas during relatively stationary large-scale wave patterns. These maxima tended to occur to the east of trough axes. Over continental regions, there was little relationship between stratocumulus and synoptic-scale flows patterns, probably because of the short lifetime of cloud over land. A summary of these findings is included.

Clark, John H. E.↗

Heat transfer on accreting ice surfaces

Based on previous observations of glaze ice accretion on aircraft surfaces, a multizone model with distinct zones of different surface roughness is demonstrated. The use of surface roughness in the LEWICE ice accretion prediction code is examined. It was found that roughness is used in two ways: (1) to determine the laminar to turbulent boundary-layer transition location; and (2) to calculate the convective turbulent heat-transfer coefficient. A two-zone version of the multizone model is implemented in the LEWICE code, and compared with experimental convective heat-transfer coefficient and ice accretion results. The analysis of the boundary-layer transition, surface roughness, and viscous flowfield effects significantly increased the accuracy in predicting heat-transfer coefficients. The multizone model was found to significantly improve the ice accretion prediction for the cases compared.

Yamaguchi, Keiko↗

Three-dimensional numerical simulation of interplanetary magnetic field changes at 1 AU as a consequence of simulated solar flares

In order to study the relationship between different forms of activity and transient variations of the north-south component, B(sub z), of the Interplanetary Magnetic Field (IMF), at 1 AU, a three dimensional numerical simulation code was employed to study several aspects of this problem. One form of solar activity, the flare, is simulated by using a pressure pulse at different locations near the solar surface and observing the simulated IMF evolution of B(sub theta)(-B(sub z)) at 1 AU. It was found, for a given pressure pulse, that the orientation of the corresponding transient variation of B(sub z) has a strong relationship with the location of the pressure pulse and the initial condition of IMF.

Wu, S. T.↗

Is the Antarctic ice sheet growing?

A brief review is presented of recent observations of surface accumulation on Antarctica. It is concluded that it is as yet too early to say with confidence whether the ice sheet has recently been growing or shrinking, given the variability in accumulation pattern and the larger uncertainties in melting and calving.

Jacobs, S. S.↗

A comparison of GCM-simulated and observed mean January and July surface air temperature

Results are presented of a comparison of four present-day GCM simulations (GFDL, OSU, GISS, and UKMO) of high-resolution surface air temperature climatology, with both January and July scenarios being evaluated for each GCM. Results indicate that the surface air temperature simulations are significantly affected by model representations of the topography, sea level pressure, and precipitation, with the other factors being the inclusion of the diurnal cycle and the type of ocean model. The GISS and UKMO GCMs were found to simulate well the mean January and July surface air temperatures, whereas the OSU GCM overestimated and the GFDL GCM underestimated the temperatures.

Willmott, Cort J.↗

An integrated view of the 1987 Australian monsoon and its mesoscale convective systems. II - Vertical structure

The vertical structure of monsoon thermal forcing by precipitating convection is diagnosed in terms of horizontal divergence. Airborne Doppler-radar divergence profiles from nine diverse mesoscale convective systems (MCSs) are presented. The MCSs consisted of multicellular convective elements which in time gave rise to areas of stratiform precipitation. Each of the three basic building blocks of the MCSs - convective, intermediary, and stratiform precipitation areas - has a consistent, characteristic divergence profile. Convective areas have low-level convergence, with its peak at 2-4 km altitude, and divergence above 6 km. Intermediary areas have convergence aloft, peaked near 10 km, feeding into mean ascent high in the upper troposphere. Stratiform areas have mid-level convergence, indicating a mesoscale downdraught below the melting level, and a mesoscale updraught aloft. Rawinsonde composite divergence profiles agree with the Doppler data in at least one important respect: the lower-tropospheric convergence into the MCSs peaks 2-4-km above the surface. Rawinsonde vorticity profiles show that monsoonal tropical cyclones spin-up at these elevated levels first, then later descend to the surface. Rawinsonde observations on a larger, continental scale demonstrate that at large horizontal scales only the 'gravest vertical mode' of MCS heating is felt, while the effects of shallower components of the heating (or divergence) profiles are trapped near the heating, as predicted by geostrophic adjustment theory.

Mapes, Brian↗

What is new about the new Comet Yanaka (1988r)?

A deficiency in the observed abundances of C2 and CN in Comet Yanaka (1988r) is explained in terms of the properties of its organic refractory dust component and the fact that it is a new comet. Because the major fraction of the carbon in comets is in a mixture of complex organic molecules which earlier explained the 'missing' carbon mystery it is shown that substantial carbon depletions are impossible. The low C2 and CN production rates may be understood as consequences of Yanaka (1988r) being a new comet in combination with the small central area of coma observed. The surface of new comets resulting from cosmic-ray processing in the Oort cloud gives rise to dust which is relatively nonfragile and which remains relatively large and cool within the limits of a small diaphragm making the comet appear to be dust poor. This dust yields smaller abundances of carbon-rich species by evaporation than customary for the smaller and hotter fragmented particles further out in the coma.

Greenberg, J. M.↗

Formation of a vortex at the edge of a plate

The flow about the plate of infinite width may be represented as a potential flow with discontinuity surfaces which extend from the plate edges. For prescribed form and vortex distribution of the discontinuity surfaces, the velocity field may be calculated by means of a conformal representation. One condition is that the velocity at the plate edges must be finite. However, it is not sufficient for determination of the form and vortex distribution of the surface. However, on the basis of a similitude requirement one succeeds in finding a solution of this problem for the plate of infinite width which is correct for the very beginning of the motion of the fluid. Starting from this solution, the further development of the vortex distribution and shape of the surface are observed in the case of a plate of finite width.

THEORIES - VORTEX↗

The distribution of large volcanoes on Venus as a function of height and altitude

Theory predicts that the slower cooling of lava flows on Venus should result in lava flows that are typically 20 percent longer than their terrestrial counterparts and that the development of neutral buoyancy zones (NBZ) on Venus may be strongly influenced by altitude-controlled variations in surface pressure. Observations that support these predictions would include relatively low heights for Venus volcanoes, and an increase in both the number and development of large edifices with increasing basal altitude. The results of an analysis of the height and altitude distribution of 123 large (diameter greater than 100 km) volcanoes made using Magellan image and altimetry data are presented and these results are used to begin to test the predications of the above theories.

Keddie, S. T.↗

Impact disturbance of the Venus atmosphere

Experimental simulations of the atmosphere-surface interaction during high-velocity impact are presented. At Venus an atmospheric vortex, generated with impact, may interact with a local wind. Some surface features, observed on Magellan images may be related with the simulated effect.

Provalov, A. A.↗

Magmatic volatiles and the weathering of Mars

The sources for volatiles on Mars have been the subject of many hypotheses for exogenous influences including late accretion of volatile-enriched material, impact devolatilization to create massive early atmospheres, and even major bombardment by comets. However, the inventory of chemically active volatiles observable at the contemporary surface of Mars is consistent with domination by endogenous, subsequent planetary processes, viz., persistent magmatic outgassing. Volcanism on Mars has been widespread in both space and time. Notwithstanding important specific differences between the mantles of Earth and Mars, the geochemical similarities are such that the suite of gases emitted from Martian volcanic activity should include H2O, CO2, S-containing gases (e.g. H2S and/or SO2), and Cl-containing gases (e.g., Cl2 and/or HCl). H2O and CO2 exist in the atmosphere of Mars. Both are also present as surface condensates. However, spectroscopic observations of the Martian atmosphere clearly show that the S- and Cl-containing gases are severely depleted, with upper limits of less than or equal to 10(exp -7) the abundance of CO2. Likewise, there is no evidence of polar condensates of compounds of these elements as there is for CO2 and H2O. Within the soil, on the other hand, there has been direct measurement of incorporated H2O and abundant compounds containing S and Cl. Barring some as yet implausible geochemical sequestering process, the S/Cl ratio of about 6:1 in Martian soils implies a limit of 5% on the contribution of matter of solarlike composition (e.g., carbonaceous chondrite or cometary material) to these volatiles. Hence, exogenous sources are minor or not yet observed. From analysis of elemental trends in Martian soils, it has been recently shown that a simple two-component model can satisfy the Viking in situ measurements. Component A includes Si and most or all the Al, Ca, Ti, and Fe. Component B, taken as 16 +/- 3% by weight of the total, contains S and most or all the Cl and Mg. These results constrain several models of Martian soil mineralogy but are consistent with a mixture of silicates (such as Fe-rich clays and accessory minerals and soluble salts). The overall element profile is notably like shergottites, with significant incorporation of chemically reactive atmospheric gases from magmatic degassing.

Clark, B. C.↗

Two-dimensional converging-diverging rippled nozzles at transonic speeds

An experimental investigation was performed in the Langley 16-Foot Transonic tunnel to determine the effects of external and internal flap rippling on the aerodynamics of a nonaxisymmetric nozzle. Data were obtained at several Mach numbers from static conditions to 1.2 over a range of nozzle pressure ratios. Nozzles with chordal boattail angles of 10, 20, and 30 degrees, with and without surface rippling, were tested. No effect on discharge coefficient due to surface rippling was observed. Internal thrust losses due to surface rippling were measured and attributed to a combination of additional internal skin friction and shock losses. External nozzle drag for the baseline configurations were generally less than that for the rippled configurations at all free-stream Mach numbers tested. The difference between the baseline and rippled nozzle drag levels generally increased with increasing boat tail angle. The thrust-minus-drag level for each rippled nozzle configuration was less than the equivalent baseline configuration for each Mach number at the design nozzle pressure ratio.

Carlson, John R.↗

Approaches of comparison for clear-sky radiative fluxes from general circulation models with Earth Radiation Budget Experiment data

In order to compare the clear-sky greenhouse effect and cloud-radiative forcing from general circulation models with Earth Radiation Budget Experiments (ERBE) data, it is necessary to calculate the general circulation model (GCM) clear-sky radiative fluxes in a way consistent with ERBE. This study discusses problems associated with the available methods for clear-sky radiative flux computations in GCMs and proposes a new approach, which uses a statistical relationship between the grid cloud cover and the availability of ERBE clear-sky measurement, established from ERBE pixel data, to sample the model radiative fluxes. Calculations with version 2 of the National Center for Atmospheric Research (NCAR) Community Climate Model using observed sea surface temperature (SST) show good agreement of clear-sky sampling from the proposed method with ERBE sampling. It is also shown that large improvements are achieved in the spatial variability of the model clear-sky radiative fluxes over ocean, with reference to ERBE, by using the new clear-sky sampling method.

Zhang, M. H.↗

Refine your search to explore more results.