Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

FY-15 Progress Report on Cleanup of irradiated SHINE Target Solutions Containing 140g-U/L Uranyl Sulfate

During FY 2012 and 2013, a process was developed to convert the SHINE Target Solution (STS) of irradiated uranyl sulfate (140 g U/L) to uranyl nitrate. This process is necessary so that the uranium solution can be processed by the UREX (Uranium Extraction) separation process, which will remove impurities from the uranium so that it can be recycled. The uranyl sulfate solution must contain <0.02 M SO 4 2- so that the uranium will be extractable into the UREXsolvent. In addition, it is desired that the barium content be below 0.0007 M, as this is the limit in the Resource Conservation and Recovery Act (RCRA).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2015

Mesoscale modeling of solute precipitation and radiation damage

This report summarizes the low length scale effort during FY 2014 in developing mesoscale capabilities for microstructure evolution in reactor pressure vessels. During operation, reactor pressure vessels are subject to hardening and embrittlement caused by irradiation-induced defect accumulation and irradiation-enhanced solute precipitation. Both defect production and solute precipitation start from the atomic scale, and manifest their eventual effects as degradation in engineering-scale properties. To predict the property degradation, multiscale modeling and simulation are needed to deal with the microstructure evolution, and to link the microstructure feature to material properties. In this report, the development of mesoscale capabilities for defect accumulation and solute precipitation are summarized. Atomic-scale efforts that supply information for the mesoscale capabilities are also included.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2019

Density Calculations of Actinide Solutions using the Pitzer Method

This report summarizes an exhaustive literature search for density data of actinide solutions in support of the Nuclear Criticality Safety Program (NCSP). This work comprises an extension of work originally begun in 2003 that implemented an advanced density calculation scheme in the SCALE material input processor. This method demonstrated improved criticality calculations for aqueous systems of UO 2 (NO 3 ) 2 and Pu(NO 3 ) 4 in excess acid over a considerable range of concentrations and temperatures. It also provided for UO 2 F 2 in acid at room temperature, although with higher uncertainty. The current study was intended to search all available sources for additional data on uranium and plutonium solutions, including the open literature, reports with limited distribution, and unpublished sources such as laboratory notebooks. Data for some of the systems has been regressed to obtain model parameters for the Pitzer formalism of modeling electrolyte solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Solutions for Lasting, Viable Energy Infrastructure Technologies (SOLVE IT) Prize Final Technical Report

This is a final technical report for the American-Made The Solutions for Lasting, Viable Energy Infrastructure Technologies (SOLVE IT) Prize, funded by the Infrastructure Investments and Jobs Act through the Technology Commercialization Fund, administered by the U.S. Department of Energy (DOE) Office of Technology Commercialization (OTC) in collaboration with the Office of Clean Energy Demonstrations (OCED) and the Office of Energy Efficiency and Renewable Energy (EERE) with support from the National Laboratory of the Rockies (NLR). The SOLVE IT Prize aimed to enable local organizations to identify and implement innovative energy solutions in a way that works for their unique needs and challenges. The competition awarded $3,740,000 to winning teams across two phases. The prize was designed to support local stakeholders and organizations as they identified and implemented innovative energy solutions. In doing so, the SOLVE IT Prize looked to promote the commercialization of promising energy technologies that will lead to reliable, affordable energy across the U.S.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2018

A Survey of Protocol-Level Challenges and Solutions for Distributed Energy Resource Cyber-Physical Security

The increasing proliferation of distributed energy resources (DERs) on the smart grid has made distributed solar and wind two key contributors to the expanding attack surface of the network; however, there is a lack of proper understanding and enforcement of DER communications security requirements. With vendors employing proprietary methods to mitigate hosts of attacks, the literature currently lacks a clear organization of the protocol-level vulnerabilities, attacks, and solutions mapped to each layer of the logical model such as the OSI stack. To bridge this gap and pave the way for future research by the authors in determining key DER security requirements, this paper conducts a comprehensive review of the key vulnerabilities, attacks, and potential solutions for solar and wind DERs at the protocol level. In doing so, this paper serves as a starting point for utilities, vendors, aggregators, and other industry stakeholders to develop a clear understanding of the DER security challenges and solutions, which are key precursors to comprehending security requirements.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Prediction of Solute Segregation at Metal/Oxide Interfaces Using Machine Learning Approaches

The atomic structure and chemistry at metal/oxide interfaces play a crucial role in determining their properties. However, studying semi-coherent metal/oxide interfaces that include misfit dislocations through density functional theory (DFT) is often computationally expensive due to the large number of atoms involved, ranging from hundreds to thousands. In this study, we explore solute segregation behavior at the Fe/Y 2 O 3 interface—an important model interface for cladding applications in nuclear fission reactors—by combining DFT calculations with a machine learning (ML) approach. ML models are trained using DFT-calculated segregation energies (𝐸 𝑆𝑒𝑔 ) to identify the key chemical and geometric factors influencing solute segregation at metal/oxide interfaces, revealing the competition between these features in determining 𝐸 𝑆𝑒𝑔 . Moreover, the segregation behavior at a specific Fe/Y 2 O 3 interface is predicted with high accuracy using ML models trained on data from this interface. Furthermore, it is found that the ML models could also predict solute segregation at a different Fe/Y 2 O 3 interface with a new orientation relationship (OR), at a computational cost of less than 1/45 of that required for similar DFT calculations.

36 - MATERIALS SCIENCE↗
NASA NTRS1965

Heats of mixing in praseodymium-neodymium solid solutions.

The heats of solution in liquid tin of pure praseodymium, pure neodymium and nine praseodymium-neodymium binary alloys have been measured using liquid metal solution calorimetry. A plot of the measured heat effect for the alloys as a function of composition is linear, with the terminal points being the measured values for the pure components. This linear dependency indicates that the heat of mixing in the binary praseodymium-neodymium system is zero within experimental error, and therefore the binary alloys obey one of the criteria for an ideal solution.

Calorimetry↗
DOE OSTI2013

Reprocessing system with nuclide separation based on chromatography in hydrochloric acid solution

We have proposed the reprocessing system with nuclide separation processes based on the chromatographic technique in the hydrochloric acid solution system. Our proposed system consists of the dissolution process, the reprocessing process, the minor actinide separation process, and nuclide separation processes. In the reprocessing and separation processes, the pyridine resin is used as a main separation media. It was confirmed that the dissolution in the hydrochloric acid solution is easily achieved by the plasma voloxidation and by the addition of oxygen peroxide into the hydrochloric acid solution.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2015

Controlled crystallization of salts from nuclear waste solutions - 15235

Crystallization has been proposed as a potential method for removing low-activity salt from nuclear waste solutions. The viability of such a process hinges on the ability to partition formed salt crystals from the waste solution. Good solid-liquid separation is expected if the crystals are large and uniform, thus is important to control the crystallization operation to produce such crystals. This work examines a closed-loop control strategy for producing large salt crystals from a model electrolytic solution. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2017

Determination of critical experiment correlations for experiments involving highly enriched uranium solutions

Quantifying the correlations among critical experiments has become a topic of interest over the last 10-15 years. The correlations arise from the shared use of fissile material, non-fissile materials, fixtures, and procedures in multiple experiments or multiple experiment series. A Monte Carlo sampling technique proposed as a viable technical method to evaluate these correlations has been implemented within the SCALE 6.2 Sampler sequence. This paper presents the investigation of the use of this new tool and technique for highly enriched uranium solution experiments. One of the first attempts to quantify the correlations among critical experiments examined a series of highly enriched solution experiments, including the HST-001 series. These correlations are included in the International Criticality Safety Benchmark Evaluation Project Handbook, and they form a basis for methodology comparisons. Results generated using the Sampler implementation are compared with these previously published results. Additional studies involving the HST-001 experiment series are also presented. A range of different assumptions of the independence of the geometry components, enrichments, and other material compositions are implemented to investigate the impact of these assumptions on the correlation coefficients. These effects are investigated with these experiments because the calculation time is shorter for the solution experiments than for the low-enriched lattice experiments discussed in a companion paper. The magnitude of the effects of different independence assumptions on the correlation coefficients is important to establish which parameters must be clearly identified as shared or unique for accurate correlation determinations. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2022

Clean Energy Solutions Center Services

The Clean Energy Solutions Center is a web-based resource that helps governments design and adopt policies and programs that support the deployment of clean energy technologies. The Solutions Center's three main offerings are Ask an Expert policy assistance, training and peer-to- peer learning forums and a rich library of technical tools and publications. These services are provided at no cost to users.

ask an expert↗
DOE OSTI2015

A hybrid pore‐scale and continuum‐scale model for solute diffusion, reaction, and biofilm development in porous media

Abstract It is a challenge to upscale solute transport in porous media for multispecies bio‐kinetic reactions because of incomplete mixing within the elementary volume and because biofilm growth can change porosity and affect pore‐scale flow and diffusion. To address this challenge, we present a hybrid model that couples pore‐scale subdomains to continuum‐scale subdomains. While the pore‐scale subdomains involving significant biofilm growth and reaction are simulated using pore‐scale equations, the other subdomains are simulated using continuum‐scale equations to save computational time. The pore‐scale and continuum‐scale subdomains are coupled using a mortar method to ensure continuity of solute concentration and flux at the interfaces. We present results for a simplified two‐dimensional system, neglect advection, and use dual Monod kinetics for solute utilization and biofilm growth. The results based on the hybrid model are consistent with the results based on a pore‐scale model for three test cases that cover a wide range of Damköhler (Da = reaction rate/diffusion rate) numbers for both homogeneous (spatially periodic) and heterogeneous pore structures. We compare results from the hybrid method with an upscaled continuum model and show that the latter is valid only for cases of small Damköhler numbers, consistent with other results reported in the literature.

Tang, Youneng↗
DOE OSTI2019

Self–Sorting of 10–µm–Long Single–Walled Carbon Nanotubes in Aqueous Solution

Single-walled carbon nanotubes (SWCNTs) are a class of 1D nanomaterials that exhibit extraordinary electrical and optical properties. However, many of the fundamental studies and practical applications are stymied by sample polydispersity. SWCNTs are synthesized in bulk with broad structural (chirality) and geometrical (length and diameter) distributions; problematically, all known post-synthetic sorting methods rely on ultrasonication, which cuts SWCNTs into short segments (typically <1 μm). Here it is demonstrated that ultralong (>10 μm) SWCNTs can be efficiently separated from the shorter ones through a solution-phase “self-sorting.” It is shown that thin film transistors fabricated from long semiconducting SWCNTs exhibit a carrier mobility as high as ≈90 cm 2 V –1 s –1 , which is ≈10 times higher than the shorter counterparts and well exceeding other known materials such as organic semiconducting polymers (<1 cm 2 V –1 s –1 ), amorphous silicon (≈1 cm 2 V –1 s –1 ), and nanocrystalline silicon (≈50 cm 2 V –1 s –1 ). Mechanistic studies suggest that this self-sorting relies on the equilibrium between isotropic and liquid crystalline SWCNT phases, which is driven by the solution phase behavior above the cloud point of the isotropic phase, and inversely scales with the SWCNT length. Furthermore, this length-dependent self-sorting technique opens a path to attain the long- sought ultralong, electronically pure carbon nanotube materials through scalable solution processing.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Fabrication and Characterization of Composite Membranes for the Concentration of Lithium Containing Solutions Using Forward Osmosis

In this study, an energy and highly time efficient, cost effective, and scalable forward osmosis (FO) composite polyvinylidene fluoride (PVDF) membrane is developed to concentrate lithium chloride recovered from naturally occurring geothermal brine resources. Dense thin robust defect-free Kynar-PVDF membranes are fabricated on porous PVDF hollow fiber supports. Various membrane fabrication parameters such as membrane thickness, coating solution concentration, cross-linker concentration, and curing temperature are studied to develop a defect-free dense membrane. Advanced characterization tools such as FIB-SEM, Raman, FTIR spectroscopy, and XRD are used to study the surface and cross-sectional morphology, chemistry of crosslinking, crystallinity and chemical structure of the dense PVDF membrane. FO is utilized to concentrate LiCl in the solution from 36 to 175 g L -1 with an average water transfer rate of 0.450 L m -2 h -1 (LMH) at 85 °C. Furthermore, the membrane showed stable performance for more than 550 h while maintaining the purity of the concentrated lithium chloride solution of >99.99 wt%. Overall, the results suggest that the FO-based technology is an innovative, time and energy efficient approach compared to the conventional technologies for concentration of battery grade LiCl for application in lithium ion batteries and other clean energy technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

3D Printing of Solution‐Processable 2D Nanoplates and 1D Nanorods for Flexible Thermoelectrics with Ultrahigh Power Factor at Low‐Medium Temperatures

Abstract Solution‐processable semiconducting 2D nanoplates and 1D nanorods are attractive building blocks for diverse technologies, including thermoelectrics, optoelectronics, and electronics. However, transforming colloidal nanoparticles into high‐performance and flexible devices remains a challenge. For example, flexible films prepared by solution‐processed semiconducting nanocrystals are typically plagued by poor thermoelectric and electrical transport properties. Here, a highly scalable 3D conformal additive printing approach to directly convert solution‐processed 2D nanoplates and 1D nanorods into high‐performing flexible devices is reported. The flexible films printed using Sb 2 Te 3 nanoplates and subsequently sintered at 400 °C demonstrate exceptional thermoelectric power factor of 1.5 mW m −1 K −2 over a wide temperature range (350–550 K). By synergistically combining Sb 2 Te 3 2D nanoplates with Te 1D nanorods, the power factor of the flexible film reaches an unprecedented maximum value of 2.2 mW m −1 K −2 at 500 K, which is significantly higher than the best reported values for p‐type flexible thermoelectric films. A fully printed flexible generator device exhibits a competitive electrical power density of 7.65 mW cm −2 with a reasonably small temperature difference of 60 K. The versatile printing method for directly transforming nanoscale building blocks into functional devices paves the way for developing not only flexible energy harvesters but also a broad range of flexible/wearable electronics and sensors.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Solution‐Processed CsPbBr 3 Quantum Dots/Organic Semiconductor Planar Heterojunctions for High‐Performance Photodetectors

Abstract Planar heterojunctions (PHJs) are fundamental building blocks for construction of semiconductor devices. However, fabricating PHJs with solution‐processable semiconductors such as organic semiconductors (OSCs) is a challenge. Herein, utilizing the orthogonal solubility and good wettability between CsPbBr 3 perovskite quantum dots (PQDs) and OSCs, fabrication of solution‐processed PQD/OSC PHJs are reported. The phototransistors based on bilayer PQD/PDVT‐10 PHJs show responsivity up to 1.64 × 10 4 A W −1 , specific detectivity of 3.17 × 10 12 Jones, and photosensitivity of 5.33 × 10 6 when illuminated by 450 nm light. Such high photodetection performance is attributed to efficient charge dissociation and transport, as well as the photogating effect in the PHJs. Furthermore, the tri‐layer PDVT‐10/PQD/Y6 PHJs are used to construct photodiodes working in self‐powered mode, which exhibit broad range photoresponse from ultraviolet to near‐infrared, with responsivity approaching 10 −1 A W −1 and detectivity over 10 6 Jones. These results present a convenient and scalable production processes for solution‐processed PHJs and show their great potential for optoelectronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Enhancing Molecular Alignment and Charge Transport of Solution-Sheared Semiconducting Polymer Films by the Electrical-Blade Effect

Controlling polymer chain alignment through processing is a means of tuning the charge transport of solution-based conjugated polymers. In this work, a processing strategy is proposed in which an external electric field (E-field) is applied to the coating blade (E-blade) to align polymer chain during solution-shearing, a meniscus-guided coating technique. A theoretical model based on dielectrophoresis quantitatively describes and predicts the alignment process and is used to guide the selection of the optimal conditions of the applied E-field. Using these conditions, more than two-fold increase in chain alignment is observed for E-bladed thin films of a diketopyrrolopyrrole (DPP) semiconducting polymer without affecting other morphological aspects such as film thickness, film coverage or fiber-like aggregation. Organic field effect transistors based on the E-bladed DPP polymer are fabricated at ambient conditions and over areas of a few cm2. They display a 3-fold improvement in their mobilities and a strong enhancement in charge transport anisotropy compared to films prepared without E-field. These results reveal a synergistic alignment effect from both the solution-shearing process and the applied E-field, and introduce a novel and general approach to control the morphology and the electrical properties of solutioncoated conjugated polymer thin films.

42 ENGINEERING↗
DOE OSTI2017

Effect of Precursor Solution Aging on the Crystallinity and Photovoltaic Performance of Perovskite Solar Cells

Perovskite materials due to their exceptional photophysical properties are beginning to dominate the field of thin‐film optoelectronic devices. However, one of the primary challenges is the processing‐dependent variability in the properties, thus making it imperative to understand the origin of such variations. Here, it is discovered that the precursor solution aging time before it is cast into a thin film, is a subtle but a very important factor that dramatically affects the overall thin‐film formation and crystallinity and therein factors such as grain growth, phase purity, surface uniformity, trap state density, and overall solar cell performance. It is shown that progressive aging of the precursor promotes efficient formation of larger seeds after the fast nucleation of a large density of small seeds. The hot‐casting method then leads to the growth of large grains in uniform thin‐films with excellent crystallinity validated using scanning microscopy images and X‐ray diffraction patterns. The high‐quality films cast from aged solution is ideal for thin‐film photovoltaic device fabrication with reduced shunt current and good charge transport. This observation is a significant step toward achieving highly crystalline thin‐films with reliability in device performance and establishes the subtle but dramatic effect of solution aging before fabricating perovskite thin‐films.

Tsai, Hsinhan↗

Refine your search to explore more results.