Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shear flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

A mass-conserving lattice Boltzmann method with dynamic grid refinement for immiscible two-phase flows

A mass-conserving lattice Boltzmann method (LBM) for multiphase flows is presented in this paper. The proposed LBM improves a previous model (Lee and Liu, 2010 [21]) in terms of mass conservation, speed-up, and efficiency, and also extends its capabilities for implementation on non-uniform grids. The presented model consists of a phase-field lattice Boltzmann equation (LBE) for tracking the interface between different fluids and a pressure-evolution LBM for recovering the hydrodynamic properties. In addition to the mass conservation property and the simplicity of the algorithm, the advantages of the current phase-field LBE are that it is an order of magnitude faster than the previous interface tracking LBE proposed by Lee and Liu (2010) [21] and it requires less memory resources for data storage. Meanwhile, the pressure-evolution LBM is equipped with a multi-relaxation-time (MRT) collision operator to facilitate attainability of small relaxation rates thereby allowing simulation of multiphase flows at higher Reynolds numbers. Additionally, we reformulate the presented MRT-LBM on nonuniform grids within an adaptive mesh refinement (AMR) framework. Various benchmark studies such as a rising bubble and a falling drop under buoyancy, droplet splashing on a wet surface, and droplet coalescence onto a fluid interface are conducted to examine the accuracy and versatility of the proposed AMR-LBM. The proposed model is further validated by comparing the results with other LB models on uniform grids. A factor of about 20 in savings of computational resources is achieved by using the proposed AMR-LBM. As a more demanding application, the Kelvin–Helmholtz instability (KHI) of a shear-layer flow is investigated for both density-matched and density-stratified binary fluids. The KHI results of the density-matched fluids are shown to be in good agreement with the benchmark AMR results based on the sharp-interface approach. When a density contrast between the two fluids exists, a typical chaotic structure in the flow field is observed at a Reynolds number of 10000, which indicates that the proposed model is a promising tool for direct numerical simulation of two-phase flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Correlation of turbulent shear layer attachment peak heating near Mach 6

A correlation of new turbulent two-dimensional data and peak heating data for attaching free shear layers is presented for a 2.54-cm and 5.08-cm diam cylindrical leading-edge slab 25.4 cm long, and 7.62 and 10.16 cm wide. A 30.48 x 25.4 cm sharp leading-edge flat plate set at 15 and 20 deg is used to generate plane impinging shocks. The freestream Mach number is 6 and the freestream Reynolds number varies from 3,300,000 to 25,600,000/m. Peak heating is measured on silica-based epoxy models with a phase change coating technique. A comparison of the free shear layer data with the transition data of Birch and Keyes (1972) reveals that the shear layer data are turbulent at attachment. The trend of the data shows that peak heating is strongly affected by the state of development at attachment. As the free shear layers become more fully developed, the data approach the two-dimensional correlation. Persistence of transitional flow structures for supersonic free shear flows is pointed out.

Keyes, J. W.↗

On Master-Length Scale Formulations for Stable Conditions in Turbulence Closure Models

Three formulations of the turbulence-length scales used in numerical modelling of atmospheric flows are compared. The comparison is made using the Mellor–Yamada–Nakanishi–Niino turbulence closure model within the stable boundary layer local similarity framework. With an appropriate choice of model constants, the model predictions are barely discernible and compare well with the empirical data obtained from the SHEBA campaign.

54 ENVIRONMENTAL SCIENCES↗

Kinematic {alpha} effect in the presence of a large-scale motion

We investigate how the addition of a large-scale steady motion, either shear or uniform flow, modifies the magnetic transport properties of a family of chaotic velocity fields with different correlation times. We compute numerically the kinematic {alpha} effect that those flows give rise to and show that it is reduced by the presence of a large-scale motion parallel to the large-scale magnetic field, except under certain conditions when it can be slightly enhanced via resonances. The {alpha} effect is shown to depend on the nature of the large-scale motion and on the temporal characteristics of the chaotic flow. These results highlight the strong influence that a shear or a uniform flow can have on the turbulent transport of magnetic fields.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Calculation of turbulent shear stress in supersonic boundary layer flows

An analysis of turbulent boundary layer flow characteristics and the computational procedure used are discussed. The integrated mass and momentum flux profiles and differentials of the integral quantities are used in the computations so that local evaluation of the streamwise velocity gradient is not necessary. The computed results are compared with measured shear stress data obtained by using hot wire anemometer and laser velocimeter techniques. The flow measurements were made upstream and downstream of an adiabatic unseparated interaction of an oblique shock wave with the turbulent boundary layer on the flat wall of a two dimensional wind tunnel. A comparison of the numerical analysis and actual measurements is made and the effects of small differences in mean flow profiles on the computed shear stress distributions are discussed.

Sun, C. C.↗

Antimicrobial Resources for Disinfection of Potable Water Systems for Future Spacecraft

As human exploration adventures beyond low earth orbit, life support systems will require more innovation and research to become self-sustaining and durable. One major concern about future space travel is the ability to store and decontaminate water for consumption and hygiene. This project explores materials and technologies for possible use in future water systems without requiring point-of-use (POU) filtering or chemical additives such as iodine or silver that require multiple doses to remain effective. This experimentation tested the efficacy of a variety of antimicrobial materials against biofilm formation in a high shear CDC Biofilm Reactor (CBR) and some materials in a low shear Drip Flow Reactor (DFR) which(also utilizes ultra violet light emitting diodes (UVLEDs) as an antimicrobial resource. Most materials were tested in the CBR using the ASTM E 2562-07 1method involving the Pseudomonas aeruginosa and coupon samples that vary in their antimicrobial coatings and surface layer topographies. In a controlled environmental chamber (CEC), the CBR underwent a batch phase, continuous flow phase (CFP), and a harvest before analysis. The DFR portion of this experimentation was performed in order to assess the antimicrobial capabilities of ultraviolet-A LEDs (UV-A) in potable water systems. The ASTM E 2647-08 was modified in order to incorporate UV-A LEDs and to operate as a closed, re-circulating system. The modified DFR apparatus that was utilized contains 4 separate channels each of which contain 2 UV-A LEDs (1 chamber is masked off to serve as a control) and each channel is equipped with its own reservoir and peristaltic pump head. The 10 DFR runs discussed in this report include 4 initial experimental runs that contained blank microscope slides to test the UVA LEDs alone, 2 that incorporated solid silver coupons, 2 that utilized titanium dioxide (Ti02) coupons as a photocatalyst, and 2 runs that utilized silver coated acrylic slides. Both the CBR and DFR experiments were analyzed for microbial content via heterotrophic plate counts (HPC) and acridine orange direct counts (AODC). Ofthe materials used in the CBR, only two materials performed as anti~icrobials under high shear conditions (a reduction of 5 or more logs) showing a>7 log reduction in viable microbes.

Morford, Megan A.↗

Adiabatic behavior of an elliptical vortex in a time-dependent external strain flow

The adiabatic behavior of two-dimensional (2D) fluid vortices subject to slowly varying, time-dependent external strain flows is studied theoretically, and experimentally using magnetized non-neutral electron plasmas. Here the E × B drift dynamics of the electrons perpendicular to the magnetic field are analogous to the motion of fluid vorticity under the 2D Euler equations describing ideal fluids. A low-dimensional elliptical vortex patch model is used along with a WKB approximation to derive a formula for the breaking of an adiabatic invariant due to the changing external flow. The invariant is interpreted as the amplitude of a perturbative oscillation about a stable fixed point corresponding to a steady elliptical vortex. Smooth, hyperbolic tangent and piecewise linear ramp functions are considered for the external strain time dependence. Standard exponential breaking is observed in the former case, whereas the latter exhibits a power-law breaking curve with periodic modulation. It is found that a driving term in the equations of motion contributes the majority of the breaking whereas the frequency variation plays a weaker, but significant role. The experimental data agree closely with the theoretical model. The most significant deviation is due to inviscid damping behavior associated with the smooth edges of the experimental vortices, which tends to reduce the amplitude of the oscillation. Finally, the results are compared and contrasted with other related experimental, numerical, and theoretical work.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Parallel electron force balance and the L-H transition

In one popular paradigm for the L-H transition, energy transfer to the mean flows directly depletes turbulence fluctuation energy, resulting in suppression of the turbulence and a corresponding transport bifurcation. To quantitatively evaluate this mechanism, one must remember that electron parallel force balance couples nonzonal velocity fluctuations with electron pressure fluctuations on rapid timescales, comparable with the electron transit time. For this reason, energy in the nonzonal velocity stays in a fairly fixed ratio to the free energy in electron density fluctuations, at least for frequency scales much slower than electron transit. Furthermore, in order for direct depletion of the energy in turbulent fluctuations to cause the L-H transition, energy transfer via Reynolds stress must therefore drain enough energy to significantly reduce the sum of the free energy in nonzonal velocities and electron pressure fluctuations. At low k⊥, the electron thermal free energy is much larger than the energy in nonzonal velocities, posing a stark challenge for this model of the L-H transition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of fouling mechanisms for diesel engine exhaust heat recovery

The effect of diesel engine exhaust fouling on heat and mass exchangers for waste heat recovery is investigated. Experiments are conducted for a range of operating conditions relevant to the use of the waste heat from a diesel engine for powering a 2.71 kW capacity absorption heat pump. Thermal resistances of fouling layers as well as their effects on pressure drop are determined, and the underlying mechanisms for deposition and removal are investigated. Fouling layer effects are most severe for the lowest coolant temperatures and 100% generator load. At these conditions, the fouling thermal resistance is approximately 70% of the total resistance, and the ratio of the steady-state pressure drop to the baseline pressure drop is 3.25. Flow induced shear is found to be the primary growth inhibiting mechanism at high exhaust velocities. Findings from this study can guide heat exchanger design for a variety of waste heat recovery systems.

04 OIL SHALES AND TAR SANDS↗

Understanding the Recent Increase in Landfalling Tropical Cyclones Over Florida's Gulf Coast

Unlike Florida's Atlantic Coast, the Gulf Coast of Florida has seen heightened tropical cyclone (TC) activity in recent decades with several destructive landfalls. Here, we attempt to understand this regional contrast using a suite of observations for the period 1979–2024. First, we demonstrate that while the El Niño Southern Oscillation (ENSO), the Atlantic Multidecadal Oscillation (AMO) and the North Atlantic Oscillation (NAO) can explain ~23% of the interannual variability in landfalls over the Gulf Coast, the variance explained by them for the Atlantic Coast is statistically insignificant. Next, we show that this striking difference may be attributed to the regional patterns of wind shear, steering flow and air-sea thermodynamic state excited by those modes of variability. The differential control exerted by ENSO, AMO, and NAO on landfalling Florida TCs, in combination with decadal trends in those modes, is likely responsible for the observed increases in landfalls over Florida's Gulf Coast.

Florida↗

Suppressed ion-scale turbulence in a hot high-β plasma

An economic magnetic fusion reactor favours a high ratio of plasma kinetic pressure to magnetic pressure in a well-confined, hot plasma with low thermal losses across the confining magnetic field. Field-reversed configuration (FRC) plasmas are potentially attractive as a reactor concept, achieving high plasma pressure in a simple axisymmetric geometry. Here, we show that FRC plasmas have unique, beneficial microstability properties that differ from typical regimes in toroidal confinement devices. Ion-scale fluctuations are found to be absent or strongly suppressed in the plasma core, mainly due to the large FRC ion orbits, resulting in near-classical thermal ion confinement. In the surrounding boundary layer plasma, ion- and electron-scale turbulence is observed once a critical pressure gradient is exceeded. As a result, the critical gradient increases in the presence of sheared plasma flow induced via electrostatic biasing, opening the prospect of active boundary and transport control in view of reactor requirements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterization and Engineering Properties of Dry and Ponded Class-F Fly Ash

Characterization studies conducted on Class-F fly-ash specimens gathered from different producers in the southeastern United States confirm general trends reported for fly ash worldwide. Further tests and detailed analyses explain the spread in specific gravity (interparticle porosity cenospheres), highlight the tendency to segregation and layering, and show marked ferromagnetism. Furthermore, data show that early diagenetic cementation—within days after wetting—hinders densification and produces a fabric that is prone to collapse. New procedures are particularly developed to diagnose and characterize early diagenesis, including (1) pH measurements as an indicator of diagenetic potential, (2) test protocols to assess early diagenesis using oedometer tests and shear-wave velocity, and (3) procedures to determine realizable unit weights as reference values for the analyses of contractive or dilative tendencies and instability. In the absence of early diagenetic cementation, dilative fly-ash behavior is expected in the upper ≈20 m under monotonic shear loading. Flow instability may follow the failure of the containment structure if the ponded ash is saturated and has experienced hindered densification.

36 MATERIALS SCIENCE↗

Dipolar vortex formation in electromagnetic ion-temperature-gradient driven waves in a dust-contaminated magnetoplasma

We investigated linear and nonlinear properties of electromagnetic ion-temperature-gradient driven mode for a dissipative, nonuniform dust-contaminated electron-ion plasma with sheared ion flows. In the linear limit, a new dispersion relation has been derived and several interesting limiting cases are also discussed. On the other hand, in the nonlinear case, by ignoring dissipative effects, the nonlinear set of equations admits a dipolar vortex type solution. The results of the present investigation should be helpful to understand some linear as well as nonlinear properties of magnetically confined dust-contaminated tokamak edge plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Revisit to Grad's Closure and Development of Physically Motivated Closure for Phenomenological High-Order Moment Model

The Grad's closure for the high-order moment equation is revisited and, by extending his theory, a physically motivated closure is developed for the one-dimensional velocity shear gas flow. The closure is based on the physical argument of the relative importance of various terms appearing in the moment equation. Also, the closure is derived such that the resulting theory may be inclusive of the well established linear theory (Navier-Stokes-Fourier) as limiting case near local thermal equilibrium.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Identification of new turbulence contributions to plasma transport and confinement in spherical tokamak regime

Highly distinct features of spherical tokamaks (ST), such as National Spherical Torus eXperiment (NSTX) and NSTX-U, result in a different fusion plasma regime with unique physics properties compared to conventional tokamaks. Nonlinear global gyrokinetic simulations critical for addressing turbulence and transport physics in the ST regime have led to new insights. The drift wave Kelvin-Helmholtz (KH) instability characterized by intrinsic mode asymmetry is identified in strongly rotating NSTX L-mode plasmas. While the strong E x B shear associated with the rotation leads to a reduction in KH/ion temperature gradient turbulence, the remaining fluctuations can produce a significant ion thermal transport that is comparable to the experimental level in the outer core region (with no "transport shortfall"). The other new, important turbulence source identified in NSTX is the dissipative trapped electron mode (DTEM), which is believed to play little role in conventional tokamak regime. Due to the high fraction of trapped electrons, long wavelength DTEMs peaking around k θρ s ~ 0.1 are destabilized in NSTX collisionality regime by electron density and temperature gradients achieved there. Surprisingly, the E x B shear stabilization effect on DTEM is remarkably weak, which makes it a major turbulence source in the ST regime dominant over collisionless TEM (CTEM). The latter, on the other hand, is subject to strong collisional and E x B shear suppression in NSTX. DTEM is shown to produce significant particle, energy and toroidal momentum transport, in agreement with experimental levels in NSTX H-modes. Furthermore, DTEM-driven transport in NSTX parametric regime is found to increase with electron collision frequency, providing one possible source for the scaling of confinement time observed in NSTX H-modes. Most interestingly, the existence of a turbulence-free regime in the collision-induced CTEM to DTEM transition, corresponding to a minimum plasma transport in advanced ST collisionality regime, is predicted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An experimental platform for investigating astrophysically relevant magnetized plasma jets on the COBRA facility

A new platform has been developed for the 1-MA COBRA generator to investigate the physical processes affecting the formation, collimation, and stability of high-speed outflows in magnetically driven laboratory plasma jets. Such experiments serve as diagnostically accessible surrogates for astrophysical jets under the assumption that the underlying dynamics are scale invariant. In contrast to previous current driven high energy density laboratory jet experiments that use radial/conical wire arrays or foils, the platform described here uses azimuthally symmetric gas-puff injection. This avoids the ablation phase from a solid target, allowing the jets to develop earlier and be driven longer without depleting their mass source and disrupting. A permanent magnet provides an initial poloidal magnetic field, which links the two concentric electrodes and mimics the boundary conditions of a star-accretion disk system. Extended magnetohydrodynamic effects can be assessed using a polarity convolute, which allows for reversal of the electrode bias. The resulting plasma jets exhibit remarkable stability, persisting for hundreds of nanoseconds and achieving aspect ratios ≳30:1.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An experimental study of the existence regions and non-linear interactions of drift wave and Kelvin–Helmholtz instabilities in a linear magnetized plasma

Experimental observations of the intrinsic excitation and non-linear interactions of drift wave (DW) and Kelvin–Helmholtz (KH) instabilities in a linear magnetized plasma column are presented. The experiments are carried out in the inverse mirror plasma experimental device (IMPED)—a cylindrical, magnetized, linear plasma machine designed to study low-frequency waves and instabilities in plasma. A novel feature of IMPED is the ability to control plasma profiles, such as the density n(r)⁠, electron temperature T e (r)⁠, and plasma potential V p (r) by varying the ratio Rm of the magnetic field in the main chamber to that in the source chamber. At high values of Rm, higher-density gradient scale length promotes the drift wave (DW) instability while lower Rm value results in a higher radial electric field, inducing a sheared poloidal flow that enhances the dominance of the Kelvin–Helmholtz (KH) mode. The background and fluctuating plasma parameters are characterized using various configurations of multiple in situ electric probes at different spatial locations to quantify the local gradients that excite the low-frequency primary instabilities. Statistical, spectral, and bispectral analysis of the density and potential signals help identify these modes in terms of wave number, frequency, phase, and amplitude and also delineate the nature of their non-linear interactions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Refine your search to explore more results.