Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “point defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Structural features, nonstoichiometry and high-temperature transport in SrFe{sub 1-x}Mo{sub x}O{sub 3-{delta}}

The oxide solid solutions SrFe{sub 1-x}Mo{sub x}O{sub 3-{delta}}, where x=0.05, 0.1 and 0.2, are studied in this work. It is shown that substitution of iron for molybdenum results in stabilization of a cubic quasi-perovskite locally inhomogeneous structure, which is evidenced by HREM and Moessbauer spectroscopy. The coulometric titration is used in order to determine changes of oxygen nonstoichiometry in the obtained solutions with temperature and ambient oxygen partial pressure. Partial molar thermodynamic functions of the labile oxygen are calculated from the measured data. The variations of partial molar entropy with oxygen content follow the ideal gas model reasonably well thus demonstrating approximately random distribution of oxygen vacancies in the doped ferrite at high temperatures. The partial molar enthalpy is found to increase with doping, which is indicative of a progressive decrease in average values of the bonding energy of labile oxygen ions. The measurements of total conductivity are used in order to determine partial contributions of charge carriers. The oxygen ion component is shown to increase at small level of doping, x=0.05 while further increase in molybdenum content is accompanied with the decline in the ion conductivity. The electron contribution in reducing conditions tends to increase with molybdenum content, which is interpreted as a manifestation of involvement of Mo{sup 5+} cations in electron transport. Concentration and mobility of electron carriers are calculated. Some increase in mobility of electron holes at small doping is explained as related to the filling of oxygen vacancies. - Graphical abstract: An electron conductivity in SrFe{sub 1-x}Mo{sub x}O{sub 3-{delta}} in reducing conditions.

36 MATERIALS SCIENCE↗

Diffusion mechanism and the thermal stability of fluorine ions in GaN after ion implantation

The diffusion mechanisms of fluorine ions in GaN are investigated by means of time-of-flight secondary ion mass spectrometry. Instead of incorporating fluorine ions close to the sample surface by fluorine plasma treatment, fluorine ion implantation with an energy of 180 keV is utilized to implant fluorine ions deep into the GaN bulk, preventing the surface effects from affecting the data analysis. It is found that the diffusion of fluorine ions in GaN is a dynamic process featuring an initial out-diffusion followed by in- diffusion and the final stabilization. A vacancy-assisted diffusion model is proposed to account for the experimental observations, which is also consistent with results on molecular dynamic simulation. Fluorine ions tend to occupy Ga vacancies induced by ion implantation and diffuse to vacancy rich regions. The number of continuous vacancy chains can be significantly reduced by a dynamic thermal annealing process. As a result, strong local confinement and stabilization of fluorine ions can be obtained in GaN crystal, suggesting excellent thermal stability of fluorine ions for device applications.

36 MATERIALS SCIENCE↗

Effect of ultraviolet and x-ray radiation on the work function of TiO{sub 2} surfaces

The work functions of nanocrystalline anatase (TiO{sub 2}) thin films and a rutile single crystal were measured using photoemission spectroscopy (PES). The nanocrystalline titanium dioxide films were deposited in-vacuum using electrospray thin film deposition. A comparison between ultraviolet photoemission spectroscopy (UPS) and low intensity x-ray photoemission spectroscopy (LIXPS) work function measurements on these samples revealed a strong, immediate, and permanent work function reduction (>0.5 eV) caused by the UPS measurements. Furthermore, it was found that regular XPS measurements also reduce the work function after exposure times ranging from seconds to minutes. These effects are similar in magnitude to artifacts seen previously on indium tin oxide (ITO) substrates characterized with XPS and UPS, and are likely related to the formation of a surface dipole through the photochemical hydroxylation of oxygen vacancies present on the TiO{sub 2} surface.

36 MATERIALS SCIENCE↗

Spin correlations and electron transport in MnBi:Au films

The structural, magnetic, and electron transport properties of Mn{sub 55-x}Au{sub x}Bi{sub 45} (x = 0, 4.5) thin films prepared by magnetron sputtering have been investigated. The magnetization of the MnBi films decreases and the coercivity increases due to Au doping. The temperature dependence of resistivity between 2 to 300 K shows that the films are metallic but the 4.5% Au-doped film shows a Kondo behavior with resistance minimum at 10.2 K. The magnetoresistance is anisotropic and the positive transverse magnetoresistance is significantly enhanced (16.3% at 70 kOe) by Au doping. We interpret these data in terms of a model in which Au atoms preferentially substitute for Mn atoms on the Mn lattice, and some Mn atoms are displaced to interstitial sites in the NiAs structure. These interstitial Mn atoms are coupled antiferromagnetically to the Mn atoms on the original Mn lattice leading to the large decrease in magnetization, Kondo effect, and the positive magnetoresistance.

36 MATERIALS SCIENCE↗

IR studies of the impact of Ge doping on the successive conversion of VO{sub n} defects in Czochralski-Si containing carbon

We report infrared absorption studies of oxygen-related defects in electron-irradiated Ge-doped Czochralski-Si. Our investigation was mainly focused on the reaction channel leading to the formation of VO{sub n} (1{<=}n{<=}6) defects. The VO{sub n} defects form mainly upon annealing, as a result of the successive aggregation of oxygen atoms in the initial VO defect produced by the irradiation: (VO+O{sub i}{yields}VO{sub 2}+O{sub i}{yields}VO{sub 3}+O{sub i}{yields}VO{sub 4},...). It was found that the ratio of the conversion of VO{sub n} to VO{sub n+1} defects is sensitive to the Ge content of the material. In particular, the ratio of the conversion of the VO to the VO{sub 2} defects was found to decrease with the increase in Ge concentration of the samples, although the opposite trend was observed for the VO{sub 3} to VO{sub 4} conversion. However, the VO{sub 2} to VO{sub 3} conversion changes only slightly with Ge content, being practically unaffected for Ge concentrations up to 2x10{sup 20} cm{sup -3}. In the case of VO{sub 2} formation, the phenomenon was attributed to the elastic strains induced in the lattice due to the Ge presence which affects the balance between the reactions VO+O{sub i}{yields}VO{sub 2}, VO+Si{sub I}{yields}O{sub i}, mainly involved in the decay of the VO and the growth of the VO{sub 2} defects. In the case of VO{sub 4} formation, the phenomenon was discussed by taking into account the enhancement of the diffusivity of the O{sub i} atoms in the Ge-doped Si, which could lead to an enhancement of the rate of the reaction VO{sub 3}+O{sub i}{yields}VO{sub 4}. For the VO{sub 3} formation this effect is practically negligible due to the fact that at the temperatures of VO{sub 2} to VO{sub 3} conversion oxygen diffusivity is quite small. The exhibited behavior in the conversion of the VO{sub n} to VO{sub n+1} defects (n=1,2,3) was similar in Ge-doped samples with low carbon content ([C{sub s}]<2x10{sup 16} cm{sup -3}) and in Ge-doped samples with high carbon content ([C{sub s}]{>=}1x10{sup 17} cm{sup -3}). The impact of C as well as its role in the conversion efficiency of VO to VO{sub 2} was studied by comparing the spectra in low carbon and high carbon Ge free Si material. Furthermore, a pair of bands at (1037,1051 cm{sup -1}) was attributed to the VO{sub 5} defect. The origin of another pair of bands (967,1005 cm{sup -1}) was discussed and tentatively correlated with a VO{sub n}C{sub s} structure. The role of Ge and C in the formation of the latter two pairs of bands was discussed.

36 MATERIALS SCIENCE↗

Bandgap tailoring of rutile TiO{sub 2}(110) via surface patterning with electron cyclotron resonance sputtering

Crystalline TiO{sub 2} nanodots have been formed on single crystal rutile TiO{sub 2}(110) surfaces via ion beam sputtering method by utilizing Ar ion beams from electron cyclotron resonance source. Nearly five times enhancement in absorbance of visible light, {approx}5 times increase in luminescence, and {approx}0.1 eV narrowing of bandgap are observed for nanodot-patterned surfaces, in the absence of any dopant material. Formation of crystalline rutile TiO{sub 2} nanodots and development of Ti interstitials on the TiO{sub 2}(110) surface, after ion beam sputtering, are responsible for these observations. Results suggest that these nanodot-patterned rutile TiO{sub 2} surfaces can become effective photocatalysts.

36 MATERIALS SCIENCE↗

Electronic structure studies of Fe doped CeO{sub 2} thin films by resonance photoemission spectroscopy

We have studied the modification in the electronic properties of pulsed laser deposited CeO{sub 2} thin films due to Fe doping (2 and 6 at %), with the help of x-ray photoemission spectroscopy (XPS) and resonance photoemission spectroscopy (RPES) measurements. XPS results indicate the ionic state of Fe in the Fe doped films, ruling out the possibility of Fe metallic clusters. Valence band spectra of CeO{sub 2} show an additional feature after Fe doping, suggesting its incorporation in the CeO{sub 2} matrix. RPES studies on these films reveal the hybridization between oxygen vacancy induced Ce localized states and Fe derived states.

36 MATERIALS SCIENCE↗

Energy Dissipation and Defect Generation for Nanocrystalline Silicon Carbide

Large-scale molecular dynamics simulations have been employed to study defect generation and primary damage state in nano crystalline (NC) SiC of average grain diameters from 5 to 21 nm. Primary knock-on atom (PKA) kinetic energies of 10 keV are simulated, and cascade structures in NC SiC with a grain size smaller than 12 nm are generally different from those generated in single crystalline SiC. It is found that the local stresses near the grain boundaries (GBs) strongly affect the behavior of the PKA and secondary recoil atoms (SRAs), and the GBs act as sinks for deposition of kinetic energy. A striking feature is that the PKA and SRAs preferentially deposit energy along the GBs for grains with average size less 12 nm, which results in atomic displacements primarily within the GBs; whereas for larger grain sizes, most defects are produced within the grains. There exists a crossover in defect production, which is manifested in switching from grain boundary damage to grain damage. The most common defects created in NC SiC are antisite defects, following by vacancies and interstitials, in contrast to those produced in a single crystalline SiC, where the dominate defects are Frenkel pairs. Defect production efficiency increases with increasing the grain size, with a typical value of 0.18 for small grains and rising to 0.5 for larger grains.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Grain growth and phase stability of nanocrystalline cubic zirconia under ion irradiation

Grain growth, oxygen stoichiometry and phase stability of nanostructurally-stabilized zirconia (NSZ) in pure cubic phase are investigated under 2 MeV Au ion bombardment at 160 and 400 K to doses up to 35 displacements per atom (dpa). The NSZ films are produced by ion-beam-assisted deposition technique at room temperature with an average grain size of 7.7 nm. The grain size increases with dose, and follows a power law (n=6) to a saturation value of ~30 nm that decreases with temperature. Slower grain growth is observed under 400 K irradiations, as compared to 160 K irradiations, indicating that thermal grain growth is not activated and defect-stimulated grain growth is the dominating mechanism. While cubic phase is perfectly retained and no new phases are identified after the high-dose irradiations, reduction of oxygen in the irradiated NSZ films is detected. The ratio of O to Zr decreases from ~2.0 for the as-deposited films to ~1.65 after irradiation to ~35 dpa. Significant increase of oxygen vacancies in nanocrystalline zirconia suggests substantially enhanced oxygen diffusion under ion irradiation, a materials behavior far from equilibrium. The oxygen deficiency may be essential in stabilizing cubic phase to larger grain sizes.

Environmental Molecular Sciences Laboratory↗

Room temperature ferromagnetism in pristine MgO thin films

Robust ferromagnetic ordering at, and well above room temperature is observed in pure transparent MgO thin films (<170 nm thick) deposited by three different techniques. Careful study of the wide scan x-ray photoelectron spectroscopy rule out the possible presence of any magnetic contaminants. In the magnetron sputtered films, we observe magnetic phase transitions as a function of film thickness. The maximum saturation magnetization of 5.7 emu/cm{sup 3} is measured on a 170 nm thick film. The films above 500 nm are found to be diamagnetic. Ab initio calculations suggest that the ferromagnetism is mediated by cation vacancies.

36 MATERIALS SCIENCE↗

Colossal Electroresistive Properties Of CSD Grown Pr{sub 0.7}Ca{sub 0.3}MnO{sub 3} Films For Nonvolatile Memory Applications

Colossal electroresistance effects upon application of electric field in perovskite oxide Pr{sub 0.7}Ca{sub 0.3}MnO{sub 3}(PCMO) thin films, which is a promising candidate for resistance random access memory (RRAM) device have been investigated. Nanocrystalline PCMO films were grown on SiO{sub 2} substrates by chemical solution deposition and crystallized at 700 deg. C under different gas atmospheres. Four terminal current voltage characteristics of Ag/PCMO/Ag planar geometry exhibited a sharp transition from a low resistance state (LRS) to a high resistance state (HRS) with a resistance switching ratio of as high as 1100% at room temperature. Nonvolatility and high retention was confirmed by electric pulse induced resistive switching measurements. The resistance switching ratios were found to depend on the annealing conditions, suggesting an interaction between the nonlattice oxygen and oxygen vacancies and/or the cationic vacancy.

36 MATERIALS SCIENCE↗

Annealing behavior of the EB-centers and M-center in low-energy electron irradiated n-type 4H-SiC

After low-energy electron irradiation of epitaxial n-type 4H-SiC with a dose of 5x10{sup 16} cm{sup -2}, the bistable M-center, previously reported in high-energy proton implanted 4H-SiC, is detected in the deep level transient spectroscopy (DLTS) spectrum. The annealing behavior of the M-center is confirmed, and an enhanced recombination process is suggested. The annihilation process is coincidental with the evolvement of the bistable EB-centers in the low temperature range of the DLTS spectrum. The annealing energy of the M-center is similar to the generation energy of the EB-centers, thus partial transformation of the M-center to the EB-centers is suggested. The EB-centers completely disappeared after annealing temperatures higher than 700 deg. C without the formation of new defects in the observed DLTS scanning range. The threshold energy for moving Si atom in SiC is higher than the applied irradiation energy, and the annihilation temperatures are relatively low, therefore the M-center, EH1 and EH3, as well as the EB-centers are attributed to defects related to the C atom in SiC, most probably to carbon interstitials and their complexes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental elucidation of vacancy complexes associated with hydrogen ion-induced splitting of bulk GaN

We present a detailed study of the thermal evolution of H ion-induced vacancy related complexes and voids in bulk GaN implanted under ion-cut conditions. By using transmission electron microscopy, we found that the damage band in as-implanted GaN is decorated with a high density of nanobubbles of approx1-2 nm in diameter. Variable energy Doppler broadening spectroscopy showed that this band contains vacancy clusters and voids. In addition to vacancy clusters, the presence of V{sub Ga}, V{sub Ga}-H{sub 2}, and V{sub Ga}V{sub N} complexes was evidenced by pulsed low-energy positron lifetime spectroscopy. Subtle changes upon annealing in these vacancy complexes were also investigated. As a general trend, a growth in open-volume defects is detected in parallel to an increase in both size and density of nanobubbles. The observed vacancy complexes appear to be stable during annealing. However, for temperatures above 450 deg. C, unusually large lifetimes were measured. These lifetimes are attributed to the formation of positronium in GaN. Since the formation of positronium is not possible in a dense semiconductor, our finding demonstrates the presence of sufficiently large open-volume defects in this temperature range. Based on the Tao-Eldrup model, the average lattice opening during thermal annealing was quantified. We found that a void diameter of 0.4 nm is induced by annealing at 600 deg. C. The role of these complexes in the subsurface microcracking is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mn incorporation into the GaAs lattice investigated by hard x-ray photoelectron spectroscopy and diffraction

Photoelectron spectroscopy and diffraction have been used to investigate structural changes during the annealing process of Ga{sub 1-x}Mn{sub x}As samples. Hard x-ray radiation helped in observing photoelectron core-level spectra and electron diffraction from the bulk underlying the oxidized surface layer. High electron-energy resolution enabled us to separate the components due to substitutional and interstitial Mn atoms in the intrinsic Mn 2p{sub 3/2} photoemission profile, resulting in two peaks at 638.8 and 639.5 eV binding energy, respectively. The peaks display the known characteristic behavior after annealing, that is, an almost complete reduction of the interstitial component and preservation of the substitutional component. In the photoelectron diffraction, a sensitivity of high-energy polar plots to the incorporation sites of photoemitting atoms into the atomic lattice has been shown. As a consequence, the experimental polar plots from substitutional and interstitial Mn atoms, which are supported theoretically, show characteristic features that provide structural information. From the similarities and differences of the polar plots for Mn and Ga, we have confirmed the assignment of components within the intrinsic part of the photoemission Mn 2p{sub 3/2} signal suggested by photoelectron spectroscopy.

36 MATERIALS SCIENCE↗

Primary radiation damage on displacement cascades in UO 2 , ThO 2 and (U 0.5 Th 0.5 )O 2

Primary radiation damage in UO 2 , ThO 2 and (U 0.5 Th 0.5 )O 2 has been investigated as function of temperature (300 to 1500 K) using classical molecular dynamics (MD) simulations. Displacement cascades of 5 keV are used for defect production. The number of defects produced from the cascade events in UO 2 is higher than that in ThO 2 at all temperatures. Our results indicate that the defect production in (U 0.5 Th 0.5 )O 2 is different from that in the pure oxides. The number of residual defects in the mixed oxide fuel is considerably higher than in UO 2 or ThO 2 . In all three systems studied, the fraction of anion defects is much higher than that of cations, in line with higher defect energies of the U sublattice compared to the O sublattice. It is also reported that for increasing temperature peak damage increases, while residual damage decreases. Furthermore, this is indicative of the greater recombination of defects due to enhanced mobility at high temperatures. Overall, all systems studied exhibit clustering in the residual damage with interstitial clusters tending to be smaller than voids.

36 MATERIALS SCIENCE↗

FATIGUE PROPERTIES OF MODIFIED 316LN STAINLESS STEEL AT 4 K FOR HIGH FIELD CABLE-IN-CONDUIT APPLICATIONS

Cable-In-Conduit-Conductor (CICC) alloys, exposed to Nb{sub 3}Sn reaction heat-treatments, such as modified 316LN require a design specific database. A lack of fatigue life data (S-n curves) that could be applied in the design of the ITER CS and the NHMFL Series Connected Hybrid magnets is the impetus for the research presented here. The modified 316LN is distinguished by a lower carbon content and higher nitrogen content when compared to conventional 316LN. Because the interstitial alloying elements affect the mechanical properties significantly, it is necessary to characterize this alloy in a systematic way. In conjunction, to ensure magnet reliability and performance, several criteria and expectations must be met, including: high fatigue life at the operating stresses, optimal stress management at cryogenic temperatures and thin walled conduit to reduce coil mass. Tension-tension load control axial fatigue tests have good applicability to CICC solenoid magnet design, thus a series of 4 K strength versus fatigue life curves have been generated. In-situ samples of 316LN base metal, seam welded, butt welded and seam plus butt welded are removed directly from the conduit in order to address base and weld material fatigue life variability. The more than 30 fatigue tests show good grouping on the fatigue life curve and allow discretionary 4 K fatigue life predictions for conduit made with modified 316LN.

36 MATERIALS SCIENCE↗

Dielectric screening and vacancy formation for large neutral and charged Si n H m ( n > 1500 ) nanocrystals using real-space pseudopotentials

A commonly used procedure for computing the properties of defects in crystalline materials is to consider a large supercell that includes the defect of interest. This is a straightforward technique as standard energy band codes can be used for such computations. For neutral defects, the only impediment of such an approach is to avoid defect-defect interactions between adjoining cells. However, this procedure can be complex if the defect of interest is charged as the system at large contains Coulombic divergences. Moreover, some have recently argued that the conventional definition of formation energies for charged defects cannot be reconciled with statistical mechanics. Here, we focus on an alternative approach. We consider large nanocrystals wherein a charged defect can be placed. Since the system is confined, a charged defect within the nanocrystal does not result in a Coulombic divergence. The chief impediment is computational, i.e., while no defect-defect or Coulombic divergences are present, the nanocrystal must be sufficiently large to allow the system to properly replicate a bulklike configuration. With the development of new algorithms and hardware advances, computations for systems of sufficient size to address this issue are feasible. In particular, we solve the Kohn-Sham equation in real space using pseudopotential-density-functional theory for large silicon nanocrystals, which contain thousands of atoms. Further, we focus on (i) the screening of a point charge and (ii) the formation of a charged vacancy in hydrogen-terminated silicon nanocrystals. This approach allows us to examine the role of quantum confinement in addition to exploring the bulk limit. Comparisons to other methods confirm the viability of this approach.

36 MATERIALS SCIENCE↗

Refine your search to explore more results.