Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “partial derivative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Nanostructure and burning mode of light-duty diesel particulate with conventional diesel, biodiesel, and intermediate blends

The nanostructure of diesel particulates has been shown to impact its oxidation rate and burnout trajectory. Additionally, this nanostructure can evolve during the oxidation process, furthering its influence on the burnout process. For this study, exhaust particulates were generated on a light-duty diesel engine with conventional diesel fuel, biodiesel, and intermediate blends of the two at a single load-speed point. Despite the singular engine platform and operating point, the different fuels created particulates with varied nanostructure, thereby greatly expanding the window for observing nanostructure evolution and oxidation. The physical and chemical properties of the particulates in the nascent state and at partial oxidation states were measured in a laboratory reactor and by high-resolution transmission electron microscopy as a function of the degree of oxidation in O 2 . X-ray photoacoustic spectroscopy analysis, thermal desorption, and solvent extraction of the nascent particulate samples reveal a significant organic content in the biodiesel-derived particulates, likely accounting for differences in the nanostructure. This study reports the nanoscale structural changes in the particulate with biofuel blend level and during O 2 oxidation as observed by high-resolution transmission electron microscopy and quantitated by fringe analysis and Brunnauer–Emmet–Teller total surface area measurements. It was observed that initial fuel-related differences in the lamella lengths, spacing, and curvature disappear when the particulate reaches approximately 50% burnout. Specifically, the initial ordered, fullerenic, and amorphous nanostructures converge during the oxidation process and the surface areas of these particulates appear to grow through these complex changes in internal particle structure. The specific surface area, measured at several points along the burnout trajectory, did not match the shrinking core projection and in contrast suggested that internal porosity was increasing. Thus, the appropriate burnout model for these particulates is significantly different from the standard shrinking core assumption, which does not account for any internal structure. An alternative burnout model is supported by high-resolution transmission electron microscopy image analysis.

33 ADVANCED PROPULSION SYSTEMS↗

Stochastic Approaches for Calculating and Aggregating Detection Probabilities for Nuclear Material Diversion

The authors built and tested a stochastic simulation to estimate achieved detection probabilities (DPs) on a stratum basis, over a tailorable range of diverted amounts from 0 to 2 significant quantities (SQ), using typical International Atomic Energy Agency (IAEA) inspection data: i.e., SQ in stratum, number of items, number of gross/partial/bias defect measurements conducted, and realistic relative standard deviation (RSD) values for typical IAEA verification measurements. For bulk strata, the model calculates achieved DP at 0.01 SQ diversion increments; for item strata, the model calculates DP using the smallest realistic diversion increment (e.g., a plate, pin, or coupon). After successfully benchmarking against IAEA deterministic models, the simulation was used to test the sensitivity of DP to certain standard assumptions and selected input parameters. First, the equal defect assumption was tested; the results suggest significant complexity in the effectiveness of partial defect measurements. Next, the authors explored the sensitivity of DP to the assumed RSD of attribute tests. Then, the authors compared non-normal models for instrument performance (e.g., logistic, step, or arbitrary functions) to the typical results from a normal distribution (characterized by RSD). This last comparison was supplemented with experimentally derived performance data for an HM-5 gamma spectrometer. The HM-5 was used to make enrichment measurements on both LEU and HEU MTR fuel elements as plates were removed, and the results fit with logistic and step curves and applied in the simulation. These stochastic DP results were compared to DP estimates from a deterministic model assuming a normal curve and typical RSD, yielding insights that could improve effectiveness in the field. These early results illustrate the potential of stochastic models to better understand achieved DP and to improve safeguards effectiveness.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Comparison of methods to estimate aerosol effective radiative forcings in climate models

Abstract. Uncertainty in the effective radiative forcing (ERF) of climate primarily arises from the unknown contribution of aerosols, which impact radiative fluxes directly and through modifying cloud properties. Climate model simulations with fixed sea surface temperatures but perturbed atmospheric aerosol loadings allow for an estimate of how strongly the planet's radiative energy budget has been perturbed by the increase in aerosols since pre-industrial times. The approximate partial radiative perturbation (APRP) technique further decomposes the contributions to the direct forcing due to aerosol scattering and absorption and to the indirect forcing due to aerosol-induced changes in cloud scattering, amount, and absorption, as well as the effects of aerosols on surface albedo. Here we evaluate previously published APRP-derived estimates of aerosol effective radiative forcings from these simulations conducted in the sixth phase of the Coupled Model Intercomparison Project (CMIP6) and find that they are biased as a result of two large coding errors that – in most cases – fortuitously compensate. The most notable exception is the direct radiative forcing from absorbing aerosols, which is more than 40 % larger averaged across CMIP6 models in the present study. Correcting these biases eliminates the residuals and leads to better agreement with benchmark estimates derived from double calls to the radiation code. The APRP method – when properly implemented – remains a highly accurate and efficient technique for diagnosing aerosol ERF in cases where double radiation calls are not available, and in all cases it provides quantification of the individual contributors to the ERF that are highly useful but not otherwise available.

58 GEOSCIENCES↗

Static shape control for flexible structures

An integrated methodology is described for defining static shape control laws for large flexible structures. The techniques include modeling, identifying and estimating the control laws of distributed systems characterized in terms of infinite dimensional state and parameter spaces. The models are expressed as interconnected elliptic partial differential equations governing a range of static loads, with the capability of analyzing electromagnetic fields around antenna systems. A second-order analysis is carried out for statistical errors, and model parameters are determined by maximizing an appropriate defined likelihood functional which adjusts the model to observational data. The parameter estimates are derived from the conditional mean of the observational data, resulting in a least squares superposition of shape functions obtained from the structural model.

Rodriguez, G.↗

Coincidences in time of the Imbrium Basin impact and Apollo 15 KREEP volcanic series: Impact-induced melting?

On the Earth there may be no firm evidence that impacts can induce volcanic activity. However, the Moon does provide a very likely example of volcanism induced by an immense impact: the Imbrium Basin-forming event was immediately succeeded by a crustal partial melting event that released KREEP lava flows over a wide area. These two events are presently indistinguishable in radiometric age. The sample record indicates that such KREEP volcanism had not occurred in the region prior to that time, and never occurred again. Such coincidence in time implies a genetic relationship between the two events, and impact-induced partial melting appears to be the only candidate process. This conclusion rests essentially on the arguments that: (1) the Imbrium Basin event took place 3.86 +/- 0.02 Ga ago; (2) the Apennine Bench Formation postdates Imbrium; (3) the Apollo 15 KREEP basalts are 3.85 +/- 0.03 Ga old; (4) the Apollo 15 KREEP basalts are derived from the Apennine Bench Formation; and (5) the Apollo 15 KREEP basalts are volcanic. Thus, the Apollo 15 KREEP basalts represent a unique volcanic unit that immediately postdates the Imbrium event (within 20 Ma, possibly much less). The evidence for the links in the argument are sketched, and some implications for initial conditions are described. Ramifications of the process for the early history of the Earth are briefly explored.

Ryder, Graham↗

On the Solution of the Continuity Equation for Precipitating Electrons in Solar Flares

Electrons accelerated in solar flares are injected into the surrounding plasma, where they are subjected to the influence of collisional (Coulomb) energy losses. Their evolution is modeled by a partial differential equation describing continuity of electron number. In a recent paper, Dobranskis & Zharkova claim to have found an "updated exact analytical solution" to this continuity equation. Their solution contains an additional term that drives an exponential decrease in electron density with depth, leading them to assert that the well-known solution derived by Brown, Syrovatskii & Shmeleva, and many others is invalid. We show that the solution of Dobranskis & Zharkova results from a fundamental error in the application of the method of characteristics and is hence incorrect. Further, their comparison of the "new" analytical solution with numerical solutions of the Fokker-Planck equation fails to lend support to their result.We conclude that Dobranskis & Zharkova's solution of the universally accepted and well-established continuity equation is incorrect, and that their criticism of the correct solution is unfounded. We also demonstrate the formal equivalence of the approaches of Syrovatskii & Shmeleva and Brown, with particular reference to the evolution of the electron flux and number density (both differential in energy) in a collisional thick target. We strongly urge use of these long-established, correct solutions in future works.

Sun: flares↗

Advances in Studies of Electrode Kinetics and Mass Transport in AMTEC Cells

Previous work reported from JPL has included characterization of electrode kinetics and alkali atom transport from electrodes including Mo, W, WRh x (Mn), in sodium AMTEC cells and vapor exposure cells; and Mo in potassium vapor exposure cells. These studies were generally performed in cells with small area electrodes (about 1 to 5 cm 2 ), and device geometry had little effect on transport. Alkali metal diffusion coefficients through these electrodes have been characterized, and approximate surface diffusion coefficients were derived in cases of activated transport. A basic model of electrode kinetics and transport at the alkali metal vapor/pourous metal electrode/alkali beta"-alumina solid electrolyte (BASE) three phase boundary has been proposed which accounts for electrochemical reaction rates with a collision frequency near the three phase boundary and tunneling from the porous electrode partially covered with adsorbed alkali metal atoms. The small electrode effect in AMTEC cells has been discussed in several papers, but quantitative investigations have described only the overall effect and the important contribution of electrolyte resistance. The quantitative characterization of transport losses in cells with large area electrodes has been limited to simulations of large area electrode effects, or characterization of transport losses from large area electrodes with significant longitudinal temperature gradients. This paper describes new investigations of electrochemical kinetics and transport, with four 14.4 cm 2 WPt 3.5 electrodes, including the influence of electrode size on the mass transport loss in the AMTEC cell. These electrodes exhibit very slow sintering, as well as excellent sodium transport properties, making them attractive candidates for AMTEC power conversion use. However, the facile sodium transport in WPt 3.5 electrodes makes characterization of the transport process difficult.

electrode↗

VfOx in GEER: Functional Test of a Venus Oxygen Fugacity Sensor

VfOx, which stands for “Venus Oxygen Fugacity” is the DAVINCI mission’s Student Collaboration Experiment (SCE); a small single- objective sensor used to measure the partial pressure of molecular oxygen in Venus’ lower atmosphere. Through the mission timeline, VƒOx will be designed, fabricated, tested, operated, and results analyzed by undergraduate and graduate students mentored by the DAVINCI team in partnership with Johns Hopkins University and other institutions. The simple principal of VƒOx is a ceramic O 2 sensor derived from common applications, utilizing diffusion of O -2 ions between a standard (PdO) inside the sensor and the target atmosphere measured by a mW level voltage that depends directly on the standard/sample fO 2 ratio. A 60-day environmental test of a prototype design of the sensor was conducted at the Glenn Extreme Environment Rig (GEER) from August to October of 2022, in which VƒOx (Fig. 1) was placed inside the experimental chamber (Fig. 2) and brought to Venus surface temperature (460 °C) and pressure (92 bar) conditions, in a Venus like atmosphere (96.5% CO 2 , 3.5% N 2 ) that included trace gases like SO 2 , maintained by occasional “boosts” of extra gas during the experimental run.

Noam R. Izenberg↗

Evaluating Safeguards Statistical Assumptions via Stochastic Simulation

Herein, the authors built and tested a stochastic simulation to estimate achieved detection probabilities (DPs) on a stratum basis, over a tailorable range of diverted amounts from 0 to 2 SQ, using typical IAEA inspection data: i.e., SQ in stratum, number of items, number of gross/partial/bias defect measurements conducted, and realistic relative standard deviation (RSD) values for typical IAEA verification measurements. For bulk strata, the model calculates achieved DP at 0.01 SQ diversion increments; for item strata, the model calculates DP using the smallest realistic diversion increment (e.g., a plate, pin, or coupon). After successfully benchmarking against IAEA deterministic models, the simulation was used to test the sensitivity of DP to certain standard assumptions and selected input parameters. First, the equal defect assumption was tested; the results suggest significant complexity in the effectiveness of partial defect measurements. Next, the authors explored the sensitivity of DP to the assumed RSD of attribute tests. Then, the authors compared non-normal models for instrument performance (e.g., logistic, step, or arbitrary functions) to the typical results from a normal distribution (characterized by RSD). This last comparison was supplemented with experimentally derived performance data for an HM-5. The HM-5 was used to make enrichment measurements on both LEU and HEU MTR fuel elements as plates were removed, and the results fit with logistic and step curves and applied in the simulation. These stochastic DP results were compared to DP estimates from a deterministic model assuming a normal curve and typical RSD, yielding insights that could improve effectiveness in the field. These early results illustrate the potential of stochastic models to better understand achieved DP and to improve safeguards effectiveness.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Constraints on explosive silicon burning in core-collapse supernovae from measured Ni/Fe ratios

Measurements of explosive nucleosynthesis yields in core-collapse supernovae provide tests for explosion models. We investigate constraints on explosive conditions derivable from measured amounts of nickel and iron after radioactive decays using nucleosynthesis networks with parameterized thermodynamic trajectories. The Ni/Fe ratio is for most regimes dominated by the production ratio of {sup 58}Ni/({sup 54}Fe + {sup 56}Ni), which tends to grow with higher neutron excess and with higher entropy. For SN 2012ec, a supernova (SN) that produced a Ni/Fe ratio of 3.4 ± 1.2 times solar, we find that burning of a fuel with neutron excess η≈6×10{sup −3} is required. Unless the progenitor metallicity is over five times solar, the only layer in the progenitor with such a neutron excess is the silicon shell. SNe producing large amounts of stable nickel thus suggest that this deep-lying layer can be, at least partially, ejected in the explosion. We find that common spherically symmetric models of M{sub ZAMS}≲13 M{sub ⊙} stars exploding with a delay time of less than one second (M{sub cut}<1.5 M{sub ⊙}) are able to achieve such silicon-shell ejection. SNe that produce solar or subsolar Ni/Fe ratios, such as SN 1987A, must instead have burnt and ejected only oxygen-shell material, which allows a lower limit to the mass cut to be set. Finally, we find that the extreme Ni/Fe value of 60–75 times solar derived for the Crab cannot be reproduced by any realistic entropy burning outside the iron core, and neutrino-neutronization obtained in electron capture models remains the only viable explanation.

79 ASTRONOMY AND ASTROPHYSICS↗

Perovskite phase transformation in 0.65Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-0.35PbTiO{sub 3} nanoparticles derived by sol-gel

Fabrication of 0.65Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-0.35PbTiO{sub 3} (PMN-PT) nanoparticles with an average size of about 40 nm and their phase transformation behavior from pyrochlore to perovskite phase is investigated. A novel sol-gel method was used for the synthesis of air-stable and precipitate-free diol-based sol of PMN-PT which was dried and partially calcined at 450 deg. C for 1 h to decompose organics and bring down the free energy barrier for perovskite crystallization and then finally annealed in the temperature range 600 to 700 deg. C. Annealed at around 700 deg. C for 1 h, PMN-PT gel powder exhibited nanocrystalline morphology with perovskite phase as confirmed by the transmission electron microscopy and X-ray diffraction techniques.

36 MATERIALS SCIENCE↗

Milstein Approximation for Advection-Diffusion Equations Driven by Multiplicative Noncontinuous Martingale Noises

In this paper, the strong approximation of a stochastic partial differential equation, whose differential operator is of advection-diffusion type and which is driven by a multiplicative, infinite dimensional, cadlag, square integrable martingale, is presented. A finite dimensional projection of the infinite dimensional equation, for example a Galerkin projection, with nonequidistant time stepping is used. Error estimates for the discretized equation are derived in L{sup 2} and almost sure senses. Besides space and time discretizations, noise approximations are also provided, where the Milstein double stochastic integral is approximated in such a way that the overall complexity is not increased compared to an Euler-Maruyama approximation. Finally, simulations complete the paper.

97 MATHEMATICS AND COMPUTING↗

Mitigation Effect of an FGF-2 Peptide on Acute Gastrointestinal Syndrome After High-Dose Ionizing Radiation

Purpose: Acute gastrointestinal syndrome (AGS) resulting from ionizing radiation causes death within 7 days. Currently, no satisfactory agent exists for mitigation of AGS. A peptide derived from the receptor binding domain of fibroblast growth factor 2 (FGF-P) was synthesized and its mitigation effect on AGS was examined. Methods and Materials: A subtotal body irradiation (sub-TBI) model was created to induce gastrointestinal (GI) death while avoiding bone marrow death. After 10.5 to 16 Gy sub-TBI, mice received an intramuscular injection of FGF-P (10 mg/kg/day) or saline (0.2 ml/day) for 5 days; survival (frequency and duration) was measured. Crypt cells and their proliferation were assessed by hematoxylin, eosin, and BrdU staining. In addition, GI hemoccult score, stool formation, and plasma levels of endotoxin, insulin, amylase, interleukin (IL)-6, keratinocyte-derived chemokine (KC) monocyte chemoattractant protein 1 (MCP-1) and tumor necrosis factor (TNF)-alpha were evaluated. Results: Treatment with FGF-P rescued a significant fraction of four strains of mice (33-50%) exposed to a lethal dose of sub-TBI. Use of FGF-P improved crypt survival and repopulation and partially preserved or restored GI function. Furthermore, whereas sub-TBI increased plasma endotoxin levels and several pro-inflammation cytokines (IL-6, KC, MCP-1, and TNF-alpha), FGF-P reduced these adverse responses. Conclusions: The study data support pursuing FGF-P as a mitigator for AGS.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Stability, Electronic and Optical Properties of M 4 M'X 4 (M = Ga or In, M' = Si, Ge, or Sn, X = Chalcogen) Photovoltaic Absorbers

Three-dimensional cubic M 4 M'X 4 (M = Ga or In, M' = Si, Ge, or Sn, and X = S, Se, or Te) have been proposed as photovoltaic absorber materials. Here, we present density functional theory investigation of the stability, electronic and optical properties of M 4 M'X 4 . We find that M 4 M'X 4 exhibit unique electronic properties. M elements lose partially both the outmost s and p electrons, whereas M' elements only lose a small fraction of the valence electrons. As a result, the conduction band edges of M 4 M'X 4 consist of a large contribution from the M s orbitals, leading to rather small electron effective masses. The valence bands are derived from M, M', and X p orbitals. The band gap of this family can be tuned by selecting the combination of M and X elements. Among these semiconductors, In 4 GeS 4 , In 4 GeSe 4 , In 4 SnS 4 , and In 4 SnSe 4 are suitable for photovoltaic applications due to their stability and suitable band gaps. However, the inclusion of scarce In may hinder their large-scale applications.

36 MATERIALS SCIENCE↗

Identifying and Breaking Scaling Relations in Molecular Catalysis of Electrochemical Reactions

Improving molecular catalysis for important electrochemical proton-coupled electron transfer (PCET) reactions, such as the interconversions of H+/H2, O2/H2O, CO2/CO, and N2/NH3, is an ongoing challenge. Synthetic modifications to the molecular catalysts are valuable but often show trade-offs between turnover frequency (TOF) and the effective overpotential required to initiate catalysis (?eff). Herein, we derive a new approach for improving efficiencieshigher TOF at lower ?eff by changing the concentrations and properties of the reactants and products, rather than by modifying the catalyst. The dependence of TOF on ?eff is shown to be quite different upon changing, for instance, the pKa of the acid HA versus the concentration or partial pressure of a reactant or product. Using the electrochemical reduction of dioxygen catalyzed by iron porphyrins in DMF as an example, decreasing [HA] 10-fold lowers ?eff by 59 mV and decreases the TOF by a factor of 10. Alternatively, a 10- fold decrease in Ka(HA) also lowers ?eff by 59 mV but only decreases the TOF by a factor of 2. This approach has been used to improve a catalytic TOF by 104 vs the previously reported scaling relationship developed via synthetic modifications to the catalyst. The analysis has the potential to predict improved efficiency and product selectivity of any molecular PCET catalyst, based on its mechanism and rate law.

Pegis, Michael L.↗

Decompartmentalization of the yeast mitochondrial metabolism to improve chemical production in Issatchenkia orientalis

Microbial production of chemicals may suffer from inadequate cofactor provision, a challenge further exacerbated in yeasts due to compartmentalized cofactor metabolism. Here, we perform cofactor engineering through the decompartmentalization of mitochondrial metabolism to improve succinic acid (SA) production in Issatchenkia orientalis. We localize the reducing equivalents of mitochondrial NADH to the cytosol through cytosolic expression of its pyruvate dehydrogenase (PDH) complex and couple a reductive tricarboxylic acid pathway with a glyoxylate shunt, partially bypassing an NADH-dependent malate dehydrogenase to conserve NADH. Cytosolic SA production reaches a titer of 104 g/L and a yield of 0.85 g/g glucose, surpassing the yield of 0.66 g/g glucose constrained by cytosolic NADH availability. Additionally, expressing cytosolic PDH, we expand our I. orientalis platform to enhance acetyl-CoA-derived citramalic acid and triacetic acid lactone production by 1.22- and 4.35-fold, respectively. Our work establishes I. orientalis as a versatile platform to produce markedly reduced and acetyl-CoA-derived chemicals.

59 BASIC BIOLOGICAL SCIENCES↗

Electronic origin of the dependence of hydrogen bond strengths on nearest-neighbor and next-nearest-neighbor hydrogen bonds in polyhedral water clusters (H 2 O) n , n = 8, 20 and 24

The relative stability and the characteristics of the hydrogen bond networks in the cubic cages of (H2O)8, dodecahedral cages of (H2O)20,and tetrakaidodecahedral cages of (H2O)24 are studied. The charge-transfer and dispersion interaction terms of every pair of the hydrogen bonds are evaluated by using the perturbation theory based on the locally-projected molecular orbital (LPMO PT). Every water molecule and every hydrogen-bonded pair in polyhedral clusters are classified by the types of the adjacent molecules and hydrogen bonds. The relative binding energies among the polyhedral clusters are grouped by these classifications. The necessary condition for the stable conformers and the rules of the ordering of the relative stability among the isomers are derived from the analysis. The O–O distances and the pair-wise charge-transfer terms are dependent not only on the types of the hydrogen donor and acceptor waters but also on the types of the adjacent waters. This dependence is analyzed with Mulliken’s charge-transfer theory. The work is partially supported by the Grant-in-Aid for Science Research of JSPS (SI, DA, MA). SSX was supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences and Biosciences. Battelle operates the Pacific Northwest National Laboratory for the US Department of Energy.

Iwata, Suehiro↗

On the solution of the continuity equation for precipitating electrons in solar flares

Electrons accelerated in solar flares are injected into the surrounding plasma, where they are subjected to the influence of collisional (Coulomb) energy losses. Their evolution is modeled by a partial differential equation describing continuity of electron number. In a recent paper, Dobranskis and Zharkova claim to have found an 'updated exact analytical solution' to this continuity equation. Their solution contains an additional term that drives an exponential decrease in electron density with depth, leading them to assert that the well-known solution derived by Brown, Syrovatskii and Shmeleva, and many others is invalid. We show that the solution of Dobranskis and Zharkova results from a fundamental error in the application of the method of characteristics and is hence incorrect. Further, their comparison of the 'new' analytical solution with numerical solutions of the Fokker-Planck equation fails to lend support to their result. We conclude that Dobranskis and Zharkova's solution of the universally accepted and well-established continuity equation is incorrect, and that their criticism of the correct solution is unfounded. We also demonstrate the formal equivalence of the approaches of Syrovatskii and Shmeleva and Brown, with particular reference to the evolution of the electron flux and number density (both differential in energy) in a collisional thick target. We strongly urge use of these long-established, correct solutions in future works.

79 ASTRONOMY AND ASTROPHYSICS↗

Refine your search to explore more results.