Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “open source model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Absolute determination of local tropospheric OH concentrations

Long path absorption (LPA) according to Lambert Beer's law is a method to determine absolute concentrations of trace gases such as tropospheric OH. We have developed a LPA instrument which is based on a rapid tuning of the light source which is a frequency doubled dye laser. The laser is tuned across two or three OH absorption features around 308 nm with a scanning speed of 0.07 cm(exp -1)/microsecond and a repetition rate of 1.3 kHz. This high scanning speed greatly reduces the fluctuation of the light intensity caused by the atmosphere. To obtain the required high sensitivity the laser output power is additionally made constant and stabilized by an electro-optical modulator. The present sensitivity is of the order of a few times 10(exp 5) OH per cm(exp 3) for an acquisition time of a minute and an absorption path length of only 1200 meters so that a folding of the optical path in a multireflection cell was possible leading to a lateral dimension of the cell of a few meters. This allows local measurements to be made. Tropospheric measurements have been carried out in 1991 resulting in the determination of OH diurnal variation at specific days in late summer. Comparison with model calculations have been made. Interferences are mainly due to SO2 absorption. The problem of OH self generation in the multireflection cell is of minor extent. This could be shown by using different experimental methods. The minimum-maximum signal to noise ratio is about 8 x 10(exp -4) for a single scan. Due to the small size of the absorption cell the realization of an open air laboratory is possible in which by use of an additional UV light source or by additional fluxes of trace gases the chemistry can be changed under controlled conditions allowing kinetic studies of tropospheric photochemistry to be made in open air.

Armerding, Wolfgang↗
DOE OSTI2025

Emulation of radiation transport in 3D stochastic media using 1D planar Monte Carlo stochastic media radiation transport algorithms

A subset of stochastic media radiation transport problems involves those in which radiation is incident on a thin slab of stochastic material. Particle tracking in 3D for such problems is expensive, and 1D planar models lack accuracy because they only allow the material to change in one dimension. Therefore, we propose dimensional emulation, which through a slight modification allows existing 1D planar geometry stochastic media radiation transport models to reproduce results from the equivalent 3D models by allowing the material to change in all three dimensions, reproducing the fidelity of the 3D model for the low computational cost of the 1D planar model. In this work, we apply dimensional emulation to three Monte Carlo stochastic media radiation transport models: Chord Length Sampling (CLS), the Local Realization Preserving method (LRP), and a variant of Conditional Point Sampling (CoPS). For a common Markovian benchmark set, the 3D emulation variants of these algorithms are numerically verified to reproduce the results of the 3D variants within statistics while running 1.3 to 2 times faster in the implementation within Sandia National Laboratories open-source research code PlaybookMC. The 3D emulation variants are also shown to yield a 72%–92% reduction in error for the thin slab problems in comparison to the 1D benchmark. As a result, the 3D emulation variant of CLS and CoPS-1 are shown to reproduce 3D CLS results that were used to approximate results for a 3D spherical inclusion geometry benchmark set.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

ORION: Operational FoRecastIng Of INduced Seismicity

The Operational Forecasting of Induced Seismicity toolkit “ORION” (ORION) is an open-source, observation-based ensemble forecasting toolkit which is geared towards helping operators understand the seismic hazard (i.e., probabilistic assessment of the magnitude and frequency of induced seismic events) at a site. ORION analyzes how the seismic hazard evolves during injection and suggests possible mitigation strategies to employ if an earthquake that exceeds certain threshold is observed. Through its ensemble modeling approach, ORION leverages the benefits of statistical-, physics-, and machine learning-based forecasting methodologies, while reducing the impact of each model’s respective limitations. The ORION toolkit consists of an easy-to-use GUI interface that affords a user as much or as little interaction as desired. Advanced capabilities allow the user to upload local, high-precision earthquake catalogs, projected injection profiles and/or spatiotemporal estimates of pressure/stress, and to tune various model parameters. ORION will then provide a spatial and temporal ensemble forecast of seismicity defined as the probability of exceedance of a given earthquake magnitude over a forecast period. Additionally, ORION will provide probability distribution of the statistically derived maximum possible earthquake magnitude that may be expected. Finally, ORION will provide suggested operational management strategies (e.g. reduce injection volumes at specific wells) based on the level of hazard.

NRAP,NRAP Tools,ORION,Operational Forcasting of In↗
DOE OSTI2020

Fire, dust, air and water: Improving aerosol biogeochemistry interactions in ACME. Final report

Aerosol-biogeochemistry interactions will have important consequences for human health, ecosystem services, and climate feedbacks over the next several decades. In this proposal we seek to link how human activities on land, including direct industrial emissions and landscape fires, impact the atmosphere and the biogeochemistry of the ocean and land. Our overall goal was to complement existing work at DOE labs to improve the capability and performance of the E3SM model in short-term, high-resolution projections of climate. Projections of ocean uptake of anthropogenic carbon are highly dependent on the details of the ocean physical and biogeochemistry parameterizations. Potentially equally important are the estimates of increases in iron and soluble nitrogen deposition in aerosols to the open ocean, but there are substantial uncertainties in these feedbacks. The E3SM land model simulates natural and anthropogenic fires, but improvement is needed to more accurately simulate fire responses to climate variability as well as fire contributions to terrestrial climate feedbacks. This proposal addressed four of the six priorities within the ACME/E3SM call by improving the representation of fire, industrial combustion sources, and desert dust and adding iron and soluble iron to the atmospheric chemistry (1). Our work focused on improving ocean biogeochemistry and the response of the oceans to anthropogenic atmospheric iron and nitrogen (3). We also improved the representation of land disturbance on fires and fire mediated carbon cycle feedbacks in the land model (4). Finally we had planned to couple the land, atmosphere and ocean biogeochemical systems (6) and explore how this coupling changes the feedbacks in the climate system. Our work under this proposal was separated into the following 5 tasks: i) improve representation of fire dynamics in both boreal and tropical ecosystems, ii) improve estimates of industrial emissions of iron and phosphorus, iii) improve representation of atmospheric iron, phosphorus and nitrogen transport, chemistry and deposition, iv) improve representation of iron, phosphorus and nitrogen deposition impacts on ocean biogeochemistry, and v) couple emissions into atmosphere, to deposition onto land and ocean biogeochemistry. For all 5 tasks, we conducted offline experiments of the historical period to enable comparison with available aerosol and land surface observations. We had planned to conduct fully coupled simulations, however, these will be conducted as part of the coupling in version 3 and 4 of the E3SM model, and thus have not been completed.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1995

Reduction of Background Noise in the NASA Ames 40- by 80-Foot Wind Tunnel

Background noise in both open-jet and closed wind tunnels adversely affects the signal-to-noise ratio of acoustic measurements. To measure the noise of increasingly quieter aircraft models, the background noise will have to be reduced by physical means or through signal processing. In a closed wind tunnel, such as the NASA Ames 40- by 80- Foot Wind Tunnel, the principle background noise sources can be classified as: (1) fan drive noise; (2) microphone self-noise; (3) aerodynamically induced noise from test-dependent hardware such as model struts and junctions; and (4) noise from the test section walls and vane set. This paper describes the steps taken to minimize the influence of each of these background noise sources in the 40 x 80.

Jaeger, Stephen M.↗
NASA NTRS2017

Formal Methods Tool Qualification

Formal methods tools have been shown to be effective at finding defects in safety-critical digital systems including avionics systems. The publication of DO-178C and the accompanying formal methods supplement DO-333 allows applicants to obtain certification credit for the use of formal methods without providing justification for them as an alternative method. This project conducted an extensive study of existing formal methods tools, identifying obstacles to their qualification and proposing mitigations for those obstacles. Further, it interprets the qualification guidance for existing formal methods tools and provides case study examples for open source tools. This project also investigates the feasibility of verifying formal methods tools by generating proof certificates which capture proof of the formal methods tool's claim, which can be checked by an independent, proof certificate checking tool. Finally, the project investigates the feasibility of qualifying this proof certificate checker, in the DO-330 framework, in lieu of qualifying the model checker itself.

Wagner, Lucas G.↗
NASA NTRS2017

Reducing V&V Cost of Flight Critical Systems: Myth or Reality?

This paper presents an overview of NASA research program on the V&V of flight critical systems. Five years ago, NASA started an effort to reduce the cost and possibly increase the effectiveness of V&V for flight critical systems. It is the right time to take a look back and realize what progress has been made. This paper describes our overall approach and the tools introduced to address different phases of the software lifecycle. For example, we have improved testing by developing a statistical learning approach tor defining test cases. The tool automatically identifies possible unsafe conditions by analyzing outliers in output data; using an iterative learning process, it can then generate more test cases that represent potentially unsafe regions of operation. At the code level, we have developed and made available as open source a static analyzer for C and C++ programs called IKOS. We have shown that IKOS is very precise in the analysis of embedded C programs (very few false positives) and a bit less for regular C and C++ code. At the design level, in collaboration with our NRA partners, we have developed a suite of analysis tools for Simulink models. The analysis is done in a compositional framework for scalability.

Brat, Guillaume P.↗
NASA NTRS2022

Comparative Na and K Mercury and Moon Exospheres

Sodium and, in a lesser way, potassium atomic components of surface-bounded exospheres are among the brightest elements that can be observed from the Earth in our Solar System. Both species have been intensively observed around Mercury, the Moon and the Galilean Moons. During the last decade, new observations have been obtained thanks to space missions carrying remote and in situ instrumentation that provide a completely original view of these species in the exospheres of Mercury and the Moon. They challenged our understanding and modelling of these exospheres and opened new directions of research by suggesting the need to better take into account the relationship between the surface-exosphere and the magnetosphere. In this paper, we first review the large set of observations of Mercury and the Moon Sodium and Potassium exospheres. In the second part, we list what it tells us on the sources and sinks of these exospheres focusing in particular on the role of their magnetospheres of these objects and then discuss, in a third section, how these observations help us to understand and identify the key drivers of these exospheres.

F Leblanc↗
NASA NTRSDate not supplied

Battery State-of-Health Aware Path Planning for a Mars Rover

A rover mission consists of visiting waypoints to gather scientific samples based on set requirements. However, rovers face operational uncertainties during the mission, affecting the performance of its electrical and mechanical components and overall mission success. Hence, it is critical to have a decision-making framework that is aware of the health state of the components when planning the path of the vehicle. In particular, battery degradation, and consequently the battery State of Health (SOH), can affect the optimality of decisions made by the autonomous system in the long term. This paper presents a decision-making system that incorporates information on the energy drawn from the battery (based on the vehicle’s velocity), terrain conditions, and model-based prognostic modules to assess the impact on the battery’s state of charge (SoC). The decision-making system was formulated as a Markov Decision Process (MDP) to reach the goal destination by sending commands in a determined amount of time while maintaining the battery SoC within the policy stated. The MDP problem was programmed using the open-source framework POMDPs.jl, which has a variety of online and offline solvers. To solve the MDP problem online, we used Monte Carlo Tree Search (MCTS). Results from simulations demonstrate the effect that battery degradation and charging plans have on decision-making.

Prognostics↗
NASA NTRS1992

The introduction of spurious models in a hole-coupled Fabry-Perot open resonator

A hemispherical open resonator has previously been used to make relative comparisons of the surface resistivity of metallic thin-film samples in the submillimeter wavelength region. This resonator is fed from a far-infrared laser via a small coupling hole in the center of the concave spherical mirror. The experimental arrangement, while desirable as a coupling geometry for monitoring weak emissions from the cavity, can lead to the introduction of spurious modes into the cavity. Sources of these modes are identified, and a simple alteration of the experimental apparatus to eliminate such modes is suggested.

Cook, Jerry D.↗
DOE OSTI2023

DEPDOSE

DEPDOSE is an open-source computer application which combines the KDEP respiratory tract deposition software with committed equivalent dose coefficient tables from the DC_PAK internal dosimetry package. DEPDOSE allows the user to rapidly produce tables of dose coefficients to workers and members of the public inhaling a precisely defined, user-specified aerosols using the ICRP 60 series methodology. Combined with a plume dispersion modeling system such as QUIC, this makes it possible to predict radiation doses downstream from an accidental or intentional release of radioactive materials. For this work, a radioactive plume was calculated to members of the public downstream from a plausible release of radionuclides into the atmosphere.

Klumpp, John↗
NASA NTRS1982

Long-term variations in atomic nitrogen densities

Thermospheric densities of atomic and molecular nitrogen measured from February 1976 through December 1978 by the open source neutral mass spectrometer on the equatorial Atmosphere Explorer E satellite are considered. During this period a significant increase in N densities was observed at the above altitudes of 250 km. It is thought that the increases can be explained by increased production of N from enhanced solar extreme ultraviolet radiation but not by a simple rise in thermospheric temperature. Empirical modeling of N densities at 250 and 375 km by using stepwise regression techniques suggests that the increased solar EUV fluxes in the 800-1000 A range are sufficient to account for the observed rise in N densities at 250 km from June 1976 to June 1977 and are the dominant factor in the density increase of a factor of 5 observed at an altitude of 375 km from June 1976 to late 1978.

Engebretson, M. J.↗
NASA NTRSDate not supplied

(ODIN): An Open Source, Low-Latency Data Integration & Visualization Framework for the NASA System Wide Safety Project's Disaster Response Safety Demonstration Series

The Open Data Integration Framework (ODIN) is an open source, low latency data integration and visualization framework (https://github.com/NASARace/race-odin) developed under NASA’s System WideSafety Program to demonstrate new safety capabilities designed to improve US airspace operations. Safety demonstrations are a set of increasingly complex (from public safety perspective) disaster response scenarios under which air systems must operate with increased capacity and include: 1) Wildland fire response, 2) Hurricane relief and recovery, 4) Emergency medical delivery via UAS and 4) Urban disaster relief. To accommodate disaster response, ODIN is field deployable and can scale on one or more multi-core, commodity laptops operating with full to limited or intermittent internet connectivity, conditions likely encountered during operations. ODIN runs as webserver with local, persistent data storage to serve either public or a secured, ad hoc network (e.g., an incident command post). The current released ODIN, ODIN-Fire is tailored for wildland fire management incorporating information on satellite overpasses with links to the near real-time data and imagery from the respective agencies. Included are winds data, an important variable for emergency responders and airspace operations, and high-resolution wind forecasts generated by super-computing resources and ingested into ODIN. As an open-source project, ODIN has attracted interest from multiple entities. We will show how 1) a commercial field instrument and data provider uses ODIN to help users visualize, publish and integrate their in-situ sensor network data and 2) ODIN’s capabilities to ingest, integrate and display near-real time satellite data with air traffic and a USFS winds forecast model used in fire response and post-fire assessment. Within NASA ODIN demonstrated novel, near terminal airspace safety capabilities for a project close-out event and previously it monitored the national airspace in real-time to meet an agency milestone. ODIN is presently under development for the anticipated hurricane relief and response demonstration notionally scheduled for the 2025-27 time frame and is available from NASA's github at the above link.

Aeronautics↗
DOE OSTI2021

REopt Lite Geothermal Heat Pump Design Requirements

This document describes the design requirements for the geothermal heat pump (GHP) module being added to the existing REopt Lite web tool. This document describes the purpose, users, and functional requirements to which the modified web tool shall conform. This document will be revised, as required, throughout the development phase with consensus between the Department of Energy (DOE) Geothermal Technologies Office (GTO) and NREL. The GHP module will expand existing REopt Lite capabilities to include techno-economic optimization of GHP systems, either stand alone, or integrated with the other existing technology types, namely solar photovoltaics (PV), wind power, battery energy storage, thermal energy storage, combined hear and power (CHP), and absorption chiller. Included in this submission are links to the REopt Lite web tool and open-source Git-Hub page. The REopt Lite tool can also be accessed directly via the NREL Developer Network. A link is also provided for the REopt report that overviews the module's capabilities.

15 GEOTHERMAL ENERGY↗
DOE OSTI2021

Lifting the Garage Door on Spawn, An Open-Source BEM-Controls Engine

Spawn is the latest whole-building energy simulation engine developed by the US Department of Energy, National Labs and industry. Whereas EnergyPlus was designed as a successor to DOE-2, Spawn is not a direct successor of–nor is it intended as an imminent replacement for– EnergyPlus. Instead, Spawn reuses parts of EnergyPlus while supporting new use cases in HVAC and controls. Spawn is intended to provide several capabilities that significantly advance beyond EnergyPlus. It is intended to support the evaluation of novel HVAC and district energy systems in a more physically realistic way. Critically, it can model control in a physically realistic way, using portable specifications that can be compiled for execution on control platforms. Spawn is also intended to support co-simulation in an intrinsic way to enable integration with third-party models. This paper describes the software architecture of Spawn from model authoring to compilation and simulation. It explains how Spawn reuses the envelope and daylighting modules of EnergyPlus and couples them to HVAC and control models from the Modelica Buildings Library using the Functional Mockup Interface (FMI) standard. It presents a number of examples that: i) validate Spawn’s coupled simulation approach by comparing its results to those of EnergyPlus, ii) illustrate the Spawn methodology for modeling and simulating HVAC systems, and iii) evaluate the performance of Spawn’s Quantized State System (QSS) time integration algorithms

Wetter, Michael↗
DOE OSTI2025

Decoding substance use disorder severity from clinical notes using a large language model

Substance use disorder (SUD) poses a major concern due to its detrimental effects on health and society. SUD identification and treatment depend on a variety of factors such as severity, co-determinants (e.g., withdrawal symptoms), and social determinants of health. Existing diagnostic coding systems used by insurance providers, like the International Classification of Diseases (ICD-10), lack granularity for certain diagnoses, but American clinicians will add this granularity (as that found within the Diagnostic and Statistical Manual of Mental Disorders classification or DSM-5) as supplemental unstructured text in clinical notes. Traditional natural language processing (NLP) methods face limitations in accurately parsing such diverse clinical language. Large language models (LLMs) offer promise in overcoming these challenges by adapting to diverse language patterns. This study investigates the application of LLMs for extracting severity-related information for various SUD diagnoses from clinical notes. We propose a workflow employing zero-shot learning of LLMs with carefully crafted prompts and post-processing techniques. Through experimentation with Flan-T5, an open-source LLM, we demonstrate its superior recall compared to the rule-based approach. Focusing on 11 categories of SUD diagnoses, we show the effectiveness of LLMs in extracting severity information, contributing to improved risk assessment and treatment planning for SUD patients.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Leverage modern artificial intelligence (AI) enabled systems for waste reduction

Manufacturing industries continue to face challenges in reducing waste, as upstream strategies such as source reduction and product redesign require a deeper understanding of processes compared to conventional recycling methods. Recent advancements in artificial intelligence (AI) and machine learning (ML) have opened new opportunities to integrate modern computational techniques with traditional waste minimization strategies. This paper explores AI-enabled approaches for product redesign, source reduction, and recycling that can significantly reduce waste generation while improving efficiency and sustainability. AI-driven material substitution and lightweighting in product design enable discovery of novel materials with optimized properties, reducing waste without compromising performance. Reinforcement learning models optimize process parameters, raw material specifications, and machine sequencing to minimize production losses, while Industrial Internet of Things (IIoT) systems paired with AI analytics enhance real-time waste tracking, predictive maintenance, and quality inspection. Furthermore, AI-based demand forecasting and production planning reduce overproduction and excess inventory, as demonstrated in industrial applications. In recycling, ML-powered pattern recognition and robotic sorting technologies achieve higher accuracy in waste segregation, directly improving recycling efficiency. Complementary solutions such as smart bins and AI-enabled waste pickup scheduling optimize collection logistics, reducing both costs and emissions. Although implementation requires upfront investment in infrastructure and training, the long-term benefits include higher material efficiency, reduced waste, improved product quality, and stronger sustainability outcomes across the supply chain. By leveraging AI-enabled systems, manufacturers can align waste minimization efforts with circular economy principles, creating scalable solutions for both industry and society.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Future Projections of Lifecycle Cost and Greenhouse Gas Emissions of Light-Duty Vehicles

Vehicles with electrified powertrains carry the promise of significant reductions in greenhouse gas (GHG) emissions from a lifecycle analysis (LCA) standpoint compared to conventional internal combustion engine (CICE) vehicles. However, trade-offs exist between different types of electrified powertrains in terms of cost, consumer acceptance, and GHG reduction efficacy for different operating conditions. The open-source tool CarGHG was developed with an aim to enable the exploration of a plethora of parametric study scenarios, including the cost of electrification technologies, different driving patterns and charging habits, and the cost and carbon intensity of electricity and fuel blends. This paper introduces the framework of CarGHG, then showcases total cost of ownership (TCO) and LCA GHG results for select models of light-duty vehicles. Another capability of CarGHG, which is the ability to estimate the performance of “virtual” vehicle models (perceived vehicle design specifications not yet on the market), is utilized to explore future scenarios of electrification and low-carbon fuel blends for Small Sports Utility Vehicles (SUVs), a popular light-duty vehicle segment in North America. With opportunities, but also uncertainties, in future scenarios, it is likely wise to continue pursuing multiple ways towards the reduction of LCA GHG.

Hamza, Karim↗

Refine your search to explore more results.