Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “multiple views”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

K2P{sup 2}—A photometry pipeline for the K2 mission

With the loss of a second reaction wheel, resulting in the inability to point continuously and stably at the same field of view, the NASA Kepler satellite recently entered a new mode of observation known as the K2 mission. The data from this redesigned mission present a specific challenge; the targets systematically drift in position on an ∼6 hr timescale, inducing a significant instrumental signal in the photometric time series—this greatly impacts the ability to detect planetary signals and perform asteroseismic analysis. Here we detail our version of a reduction pipeline for K2 target pixel data, which automatically defines masks for all targets in a given frame; extracts the target’s flux and position time series; corrects the time series based on the apparent movement on the CCD (either in 1D or 2D), combined with the correction of instrumental and/or planetary signals via the Kepler Asteroseismic Science Operations Center (KASOC) filter, thus rendering the time series ready for asteroseismic analysis; computes power spectra for all targets; and identifies potential contaminations between targets. From a test of our pipeline on a sample of targets from the K2 campaign 0, the recovery of data for multiple targets increases the amount of potential light curves by a factor of ⩾10. Our pipeline could be applied to the upcoming TESS and PLATO 2.0 missions.

79 ASTRONOMY AND ASTROPHYSICS↗

SolarSMART 2020 Georgia Survey

The SolarSMART 2020 Georgia Survey dataset provides results from a survey of 1,544 residents of the State of Georgia above the age of 18 on their perceptions of photovoltaic solar energy. The survey includes the following: demographic information for each respondent, their location in the state (by ZIP Code); the type of house they reside within; whether they have or have not adopted solar energy (and if so, how did they adopt solar energy); their personal views and perceptions of solar energy both for themselves and within their community; and their perceptions of who within Georgia and across the United States would or would not be inclined to adopt solar. Respondents were asked to provide their responses to questions addressing the following issues as they pertained to both themselves and their perceptions of others (Georgians and Americans writ large): (a) perception of how home type shape solar adoption; (b) perceptions of personal values (interpersonal, political, environmental); (c) the design of solar and the marketing of it; (d) financial dimensions of adopting solar energy; (d) and favorability towards new technologies. This data was collected via an online survey through a third-party distributor between June and September of 2020. Respondents were from 151 of the 159 counties of the State of Georgia, with representation of both urban and rural residents. In total, the dataset includes 171 variables, with one being an open-ended question coded by the research team. Variables include demographic characteristics (personal, housing, location), multiple-choice single answer, ranked-choice responses to different statements about solar, and a series of two digital map exercises where respondents highlighted geographic regions (states or parts of Georgia) based on whether the believe residents there do, do not, or they do not know if the respondents do or do not adopt solar.

14 SOLAR ENERGY↗

Mechanically Biased, Hinged Pairs of Piezoelectric Benders

The upper part of the figure depicts an actuator that comprises two mechanically biased piezoelectric benders hinged together at their ends and equipped with tabs at their mid-length points for attachment to the relatively moving objects that are to be actuated. In the example of the figure, the attachment tabs are labeled to indicate that the actuator is used to drive a pump piston relative to a base plate. Actuators of this type could be used to drive low-power, small-volume pumps in consumer, medical, and aerospace applications, and to generate and measure linear displacements in such robotic applications as teleoperation and tactile feedback. Each bender is a bimorph a unitary plate that comprises an upper and a lower piezoelectric layer plus electrode layers. Benders may also be made of several layers arranged to produce the same effect at the lower operating voltages. As stated above, each bender is mechanically biased; it is fabricated to have a small permanent curvature (the bias curvature) in the absence of applied voltage. As on other bimorphs, the electrical connections on each bender are arranged so that an applied voltage of suitable polarity causes the upper layer to expand and the lower layer to contract. In this case, the net effect of applying the voltage is that the plate becomes more concave as viewed from below. Conversely, an applied voltage of the opposite polarity causes the plate to become less concave as viewed from below. The benders in a hinged pair are oriented with their bias curvatures concave inward, so that there is a bias distance between the attachment tabs. The two benders are connected electrically in parallel, with their connection polarities chosen so that an applied voltage of one polarity causes both benders to become more convex inward (more bent), while an applied voltage of the opposite polarity causes both benders to become less convex inward (less bent). An increase or decrease in bend is accompanied by an increase or decrease in distance between the attachment tabs; this increase or decrease is the linear displacement desired for actuation. Because the displacement can be either positive or negative relative to the bias distance, depending on the polarity of the applied voltage, the overall stroke achievable for a given magnitude of applied voltage is double the stroke achievable in the absence of mechanical bias. Each hinged pair can be regarded as a unit cell that can serve as a building block for a larger actuator: Multiple unit cells can be stacked (mechanically connected in series), as shown in the lower part of the figure, and electrically connected in parallel to multiply the overall stroke achievable at a given applied voltage.

Sager, Frank E.↗

WE-FG-207B-04: Noise Suppression for Energy-Resolved CT Via Variance Weighted Non-Local Filtration

Purpose: The photon starvation problem is exacerbated in energy-resolved CT, since the detected photons are shared by multiple energy channels. Using pixel similarity-based non-local filtration, we aim to produce accurate and high-resolution energy-resolved CT images with significantly reduced noise. Methods: Averaging CT images reconstructed from different energy channels reduces noise at the price of losing spectral information, while conventional denoising techniques inevitably degrade image resolution. Inspired by the fact that CT images of the same object at different energies share the same structures, we aim to reduce noise of energy-resolved CT by averaging only pixels of similar materials - a non-local filtration technique. For each CT image, an empirical exponential model is used to calculate the material similarity between two pixels based on their CT values and the similarity values are organized in a matrix form. A final similarity matrix is generated by averaging these similarity matrices, with weights inversely proportional to the estimated total noise variance in the sinogram of different energy channels. Noise suppression is achieved for each energy channel via multiplying the image vector by the similarity matrix. Results: Multiple scans on a tabletop CT system are used to simulate 6-channel energy-resolved CT, with energies ranging from 75 to 125 kVp. On a low-dose acquisition at 15 mA of the Catphan©600 phantom, our method achieves the same image spatial resolution as a high-dose scan at 80 mA with a noise standard deviation (STD) lower by a factor of >2. Compared with another non-local noise suppression algorithm (ndiNLM), the proposed algorithms obtains images with substantially improved resolution at the same level of noise reduction. Conclusion: We propose a noise-suppression method for energy-resolved CT. Our method takes full advantage of the additional structural information provided by energy-resolved CT and preserves image values at each energy level. Research reported in this publication was supported by the National Institute Of Biomedical Imaging And Bioengineering of the National Institutes of Health under Award Number R21EB019597. The content is solely the responsibility of the authors and does not necessarily represent the official views of the National Institutes of Health.

60 APPLIED LIFE SCIENCES↗

Structure of the magnetopause inferred from one-dimensional hybrid simulations

The structure of the magnetopause is investigated by studying the interaction between two plasmas with solar wind and magnetospheric properties. Both Hall-MHD and hybrid (particle ions and fluid electrons) simulations are performed to compare and contrast the nature of the solutions in the fluid and the kinetic limits. It is shown that, in accordance with previous studies, the fluid solutions consist of multiple discontinuities and waves such as slow shocks and waves, as well as contact and rotational discontinuities. In contrast, the kinetic solutions consist of fewer discontinuities and include non-MHD boundaries. The difference between the two types of solutions are attributed to the absence of contact surfaces in collisionless plasmas and the possible Landau damping of slow waves. The kinetic solutions are found to be in a much better agreement with magnetopause observations, which have shown little evidence for the presence of slow shocks or contact discontinuities. The results of kinetic calculations suggest that the presence of a small but finite normal component of the magnetic field allows for the mixing of magnetosheath and magnetospheric plasmas and may, in part, be responsible for the formation of the boundary layer even during the periods of northward interplanetary magnetic field. These results also show that the necessary changes in the fields and the plasma parameters across the magnetopause do not occur simultaneously (i.e., in the same spatial location). As such, the magnetopause cannot be viewed as a single boundary but instead is a region which includes both abrupt and gradual changes in the fields and plasma parameters.

Omidi, N.↗

How Certain are We of the Uncertainties in Recent Ozone Profile Trend Assessments of Merged Limbo Ccultation Records? Challenges and Possible Ways Forward

Most recent assessments of long-term changes in the vertical distribution of ozone (by e.g. WMO and SI2N) rely on data sets that integrate observations by multiple instruments. Several merged satellite ozone profile records have been developed over the past few years; each considers a particular set of instruments and adopts a particular merging strategy. Their intercomparison by Tummon et al. revealed that the current merging schemes are not sufficiently refined to correct for all major differences between the limb/occultation records. This shortcoming introduces uncertainties that need to be known to obtain a sound interpretation of the different satellite-based trend studies. In practice however, producing realistic uncertainty estimates is an intricate task which depends on a sufficiently detailed understanding of the characteristics of each contributing data record and on the subsequent interplay and propagation of these through the merging scheme. Our presentation discusses these challenges in the context of limb/occultation ozone profile records, but they are equally relevant for other instruments and atmospheric measurements. We start by showing how the NDACC and GAW-affiliated ground-based networks of ozonesonde and lidar instruments allowed us to characterize fourteen limb/occultation ozone profile records, together providing a global view over the last three decades. Our prime focus will be on techniques to estimate long-term drift since our results suggest this is the main driver of the major trend differences between the merged data sets. The single-instrument drift estimates are then used for a tentative estimate of the systematic uncertainty in the profile trends from merged data records. We conclude by reflecting on possible further steps needed to improve the merging algorithms and to obtain a better characterization of the uncertainties involved.

Merging Algorithms↗

THE CHANDRA HRC VIEW OF THE SUBARCSECOND STRUCTURES IN THE NUCLEAR REGION OF NGC 1068

We have obtained a high spatial resolution X-ray image of the nucleus of NGC 1068 using the High Resolution Camera (HRC-I) on board the Chandra X-ray Observatory, which provides an unprecedented view of the innermost 1 arcsec radius region of this galaxy. The HRC image resolves the narrow-line region into X-ray emission clumps matching bright emission-line clouds in the HST [OIII] {lambda}5007 images and allows comparison with subarcsecond-scale radio jet for the first time. Two distinct X-ray knots are revealed at 1.3-1.4 arcsec northeast and southwest of the nucleus. Based on the combined X-ray, [O III], and radio continuum morphology, we identify the locations of intense radio jet-cloud interaction. The [O III] to soft X-ray ratios show that some of these clouds are strongly affected by shock heating, whereas in other locations the jet simply thrusts through with no signs of strong interaction. This is further strengthened by the presence of a kT {approx} 1 keV collisionally ionized component in the ACIS spectrum of a shock-heated cloud HST-G. We estimate that the kinematic luminosity of the jet-driven shocks is 6 Multiplication-Sign 10{sup 38} erg s{sup -1}, a negligible fraction (10{sup -4}) of the estimated total jet power.

79 ASTRONOMY AND ASTROPHYSICS↗

The Gaia EDR3 view of Johnson-Kron-Cousins standard stars: the curated Landolt and Stetson collections

In the era of large surveys and space missions, it is necessary to rely on large samples of well-characterized stars for inter-calibrating and comparing measurements from different surveys and catalogues. Among the most employed photometric systems, the Johnson-Kron-Cousins has been used for decades and for a large amount of important datasets. Our goal is to profit from the Gaia EDR3 data, Gaia official cross-match algorithm, and Gaia -derived literature catalogues, to provide a well-characterized and clean sample of secondary standards in the Johnson-Kron-Cousins system, as well as a set of transformations between the main photometric systems and the Johnson-Kron-Cousins one. Using Gaia as a reference, as well as data from reddening maps, spectroscopic surveys, and variable stars monitoring surveys, we curated and characterized the widely used Landolt and Stetson collections of more than 200 000 secondary standards, employing classical as well as machine learning techniques. In particular, our atmospheric parameters agree significantly better with spectroscopic ones, compared to other machine learning catalogues. We also cross-matched the curated collections with the major photometric surveys to provide a comprehensive set of reliable measurements in the most widely adopted photometric systems. We provide a curated catalogue of secondary standards in the Johnson-Kron-Cousins system that are well-measured and as free as possible from variable and multiple sources. We characterize the collection in terms of astrophysical parameters, distance, reddening, and radial velocity. We provide a table with the magnitudes of the secondary standards in the most widely used photometric systems (ugriz, grizy, Gaia , HIPPARCOS, Tycho , 2MASS). We finally provide a set of 167 polynomial transformations, valid for dwarfs and giants, metal-poor and metal-rich stars, to transform UBVRI magnitudes in the above photometric systems and vice-versa.

79 ASTRONOMY AND ASTROPHYSICS↗

A Machine Learning Framework to Predict Images of Edge-on Protoplanetary Disks

The physical structure and properties of protoplanetary disks are typically derived from spatially resolved disk images. Edge-on disks in particular provide an important view point on the vertical structure and degree of settling of disks. Such analyses rely on radiative transfer (RT) calculations that are generally computationally intensive due to the high optical depth of disks. Here we present a machine learning framework that has the potential to dramatically speed up the forward modeling process by approximating the results of RT calculations. This framework, trained on an initial set of RT calculations, utilizes an autoencoder neural network to enable the generation of synthetic scattered light images of edge-on disks directly from a set of physical parameters. We demonstrate that this framework generates synthetic images 2–3 orders of magnitude faster than using RT calculations. These machine learning-generated images appear to approximate the RT images well, in particular preserving their size and shape. We also find a strong correlation between the latent space representations of the generated disk images and several of their associated physical parameters. Finally, we discuss potential changes to the framework, such as methods to further improve the image quality, extending the framework to multiple wavelengths, and inverting the process to infer physical parameters from observed images. Overall, these new tools have the potential to enable a more efficient and uniform analysis of edge-on disk properties and the initial conditions of planet formation.

79 ASTRONOMY AND ASTROPHYSICS↗

Development of Primary Volatile Production in COMET C/20O9 Pl (GARRADD) During its 2011-2O12 Apparition

We quantified primary volatiles in comet C/2009 Pl (Garradd) through pre- and post-perihelion observations acquired during its apparition in 2011-12 [1,2,3]. Detected volatiles include H2O, CO, CH4, C2H2, C2H6, HCN, NH3, H2CO, and CH3OH. We present production rates and chemical abundance ratios (relative to water) for all species, and I-D spatial profiles for multiple primary volatiles. We discuss these findings in the context of an emerging taxonomy based on primary volatiles in comets [4]. We used three spectrometer/telescope combinations. On UT 20ll August 7 (Rh 2.4 AU) and September 17-21 (Rh 2.0 AU), we used CRIRES at ESO's Very Large Telescope (VLT) [1]. On September 8 and 9 (Rh 2.1 AU), we used NIRSPEC at Keck-2 and CSHELL at IRTF [2]. Using NIRSPEC on October 13 and 2012 January 08 (Rh 1.83 and 1.57 AU, respectively), we detected nine primary volatiles pre-perihelion, and six post-perihelion [3]. CO was enriched in Garradd while C2H2 was strongly depleted. C2H6 and CH3OH displayed abundances close to those measured for the majority of Oort cloud comets observed to date. The high fractional abundance of CO identifies comet C12009 P1 as a CO-rich comet. Spatial profiles revealed notable differences among individual primary species. Given the relatively large heliocentric distance of C/2009 Pl, we explored the effect of water not being fully sublimated within our field of view and we identi$, the "missing" water fraction needed to reconcile the retrieved abundance ratios with the mean values found for "organics-normal" comets.

Mumma, M. J.↗

MODIS Reflective Solar Band Calibration Improvements using Pseudo-Invariant Desert Targets

To provide the best science data quality, an accurate characterization of the response versus scan angle (RVS) function is critical for the MODIS reflective solar bands (RSB) on-orbit calibration. In every MODIS operational scan, the Earth’s surface, referred to here as Earth view (EV), the space view (SV) port, and the onboard calibrators are viewed via a two-sided scan mirror. The RVS is defined as the sensor’s relative response as a function the angle of incidence (AOI) to the scan mirror. Many different approaches have been developed to derive the time-dependent RVS and its look-up table (LUT) applied to MODIS Level 1B (L1B) products since calibration Collection 4. For most MODIS RSB, the on-board calibrators can reasonably track the RVS change with time. In practice, their RVS is derived using data from on-board calibrators and the EV mirror side ratio (for mirror side 2). For Terra bands 1-4, 8-10 and Aqua bands 1-4, 8-9, an enhancement has been employed in Collections 6 and 6.1 (C6/C6.1) by using Earth scene response trending from pseudo-invariant desert sites in addition to the onboard calibrators. The current C6/C6/1 RVS algorithm is focused on fitting the EV data at each AOI over time and then deriving the relative change at different AOI. The EV response trending is currently fitted with multiple segments over time. Alternatively, the EV responses can be fit first as a function of AOI before fitting temporally in order to reduce the dependence on the stability of the desert site. These pre-treatment methods on the EV data provide improvement in the derived calibration coefficients. However, evidence of insufficient calibration is still observed in the MODIS L1B reflectance data, especially in the form of differences between the mirror sides. In this paper, we review the current methodologies that utilize the EV response trends from the pseudo-invariant Libyan desert targets to supplement the gain derived from the onboard calibrators. An improvement is then proposed and investigated such that a sliding window average (SWA) is used to pre-process the raw EV data. The SWA parameters are carefully selected using trade-off studies to accurately track the Earth scene response trending in multiple cases to overcome the reflectance differences between two mirror sides. Calibration results show improvements for both Aqua and Terra MODIS RSB L1B data products. This new adjustment has been included in the recently delivered Collection 7 LUT that will be evident in the L1B products expected to be released in late 2021.

MODIS↗

A semblance measure for model comparison

Algorithmic and computational advances have made it possible that geophysical survey and earth model design can be aided by many systematic trial inverse-modelling runs with synthetic data. Such may, for example, come up in machine-learning approaches. Automated image appraisal pertaining to such applications will involve common statistical tests for goodness-of-data fit as a primary evaluation method. However, solution non-uniqueness may render multiple images equivalent in terms of their data fit, requiring secondary categorizers. A logical choice for classifying synthetic-imaging results quantifies the goodness of model fit where a known reference model replaces the observational input. The task of model intercomparison in terms of measuring the resemblance to the reference model poses challenges to common distance-based metrics like root mean square error and mean absolute error. First, distance-based metrics can introduce spurious contributions when smooth models with fuzzy target contours are to be compared against a sharp reference. Second, large differences due to parameter-estimation overshoots can dominate distance metrics. Here, we propose a remedy that is referred to as semblance and is based on the idea of logistic functions, where a binary-dependent variable adds non-zero or zero accumulation terms for the, respectively, passing or failing of preset target thresholds. This classifying approach is amenable to an objective where model feature recognition is primary. Numerical comparisons to distance-based metrics provide evidence for the advantages of the semblance in view of this objective. Geophysical imaging in conjunction with machine-learning is seen as a benefitting upcoming application area.

58 GEOSCIENCES↗

Chemomechanical Coupling in Hexameric Protein–Protein Interfaces Harnesses Energy within V-Type ATPases

ATP synthase is the most prominent bioenergetic macromolecular motor in all life forms, utilizing the proton gradient across the cell membrane to fuel the synthesis of ATP. Notwithstanding the wealth of available biochemical and structural information inferred from years of experiments, the precise molecular mechanism whereby vacuolar (V-type) ATP synthase fulfills its biological function remains largely fragmentary. Recently, crystallographers provided the first high-resolution view of ATP activity in Enterococcus hirae V1-ATPase. Employing a combination of transition-path sampling and high-performance free-energy methods, the sequence of conformational transitions involved in a functional cycle accompanying ATP hydrolysis has been investigated in unprecedented detail over an aggregate simulation time of 65 μs. Our simulated pathways reveal that the chemical energy produced by ATP hydrolysis is harnessed via the concerted motion of the protein–protein interfaces in the V1-ring, and is nearly entirely consumed in the rotation of the central stalk. Surprisingly, in an ATPase devoid of a central stalk, the interfaces of this ring are perfectly designed for inducing ATP hydrolysis. However, in a complete V1-ATPase, the mechanical property of the central stalk is a key determinant of the rate of ATP turnover. The simulations further unveil a sequence of events, whereby unbinding of the hydrolysis product (ADP + Pi) is followed by ATP uptake, which, in turn, leads to the torque generation step and rotation of the center stalk. Molecular trajectories also bring to light multiple intermediates, two of which have been isolated in independent crystallography experiments.

Chemistry↗

Mapping the Perseus galaxy cluster with XRISM: Gas kinematic features and their implications for turbulence

We present extended gas kinematic maps of the Perseus cluster based on a combination of five new XRISM/Resolve pointings observed in 2025 with four performance verification datasets from 2024, totaling a net exposure of 745 ks. To date, Perseus remains the only cluster that has been extensively mapped out to ≃0.7 r 2500 by XRISM/Resolve, while simultaneously offering sufficient spatial resolution to resolve gaseous substructures driven by mergers and active galactic nucleus (AGN) feedback. Our observations cover multiple radial directions and a broad range of dynamical scales, enabling us to characterize the kinematic properties of the intracluster medium up to a scale of ∼500 kpc. In the measurements, we detected high-velocity dispersions (≃300km s −1 ) in the eastern region of the cluster that are spatially coincident with the extended X-ray surface brightness excess and correspond to a nonthermal pressure fraction of ≃7 − 13%. The velocity field outside the AGN-dominant region can be effectively described by a single, large-scale kinematic driver based on the velocity structure function, which statistically favors an energy injection scale of at least a few hundred kpc. The estimated turbulent dissipation energy is comparable to the gravitational potential energy released by a recent merger, implying a significant role of turbulent cascade in the merger energy conversion. In the bulk velocity field, we observed a dipole-like pattern along the east-west direction with an amplitude of ≃ ± 200 − 300 km s −1 , indicating rotational motions induced by the recent merger event. This feature constrains the viewing direction to ≃30° −50° relative to the normal of the merger plane. Our hydrodynamic simulations suggest that Perseus has experienced at least two energetic mergers since redshift z ∼ 1, the most recent of which is associated with the radio galaxy IC310, in agreement with recent SRG/eROSITA findings. This study showcases exciting scientific opportunities for future missions with high-resolution spectroscopic capabilities (e.g., HUBS, LEM, and NewAthena).

79 ASTRONOMY AND ASTROPHYSICS↗

Voyager Photometry of Saturn's A Ring

Saturn's A Ring samples a wide range of dynamical environments, from the relatively unperturbed, optically thick inner region to the outer part of the ring, which contains numerous density waves. We analyze Voyager images of the A Ring to determine how the reflectivity of different radial regions varies with lighting and viewing geometry. We model our data with a classical radiative transfer code that includes the illumination of the rings by the Sun and Saturn. The particles in the inner and mid-A Ring have Bond albedos near 0.5 and are more backscattering than satellites of comparable albedo. The region outside the Encke Gap becomes progressively less backscattering with increasing radius. Particle properties change abruptly outside the Keeler Gap; particles here have an albedo near 0.6 and a Lambert-like phase function. In contrast with previous suggestions, the abundance of free, submicrometer "dust" is small throughout the entire A Ring; this conclusion holds even in the outermost A Ring, which is strongly perturbed by density waves. Models derived from low-phase data, assuming only macroscopic particles, correctly predict the highphase reflectivity of the outer A Ring and individual strong density waves in the mid-A Ring. However, the inner and mid-A Ring are typically darker at high phase by a factor of two than our models predict. This discrepancy may be due to the reduced multiple scattering from a layer in which the particles are more closely packed. We have also studied the quadrupole azimuthal brightness asymmetry of the A Ring. The asymmetry has a full amplitude of 35% in the mid-A Ring in low-phase Voyager 2 images. We present results on its behavior and possible implications for the structure of the rings. Finally, we compare our results with studies using other data sets to synthesize our current understanding of the nature of the A Ring.

Dones, Luke↗

The Parabolic Deformable Mirror Testbed at NASA Goddard Space Flight Center

One of the primary goals of future coronagraph space missions is to spectrally characterize Earth-like exoplanets. Observing efficiency is critical and directly related to how large of a field of view we can correct and the bandwidth of that correction. In addition to the coronagraph itself, the bandwidth and depth of contrast is related to the wavefront control system, which classically uses two deformable mirrors (DMs) in series. The minimum distance between these DMs is determined by the Talbot distance of the beam, meaning it scales as the square of the beam size. NASA Goddard is exploring an alternative design architecture to the two-DM approach in which the reimaging optics for the coronagraph are also deformable and we only retain a high-order pupil DM. With these off-axis parabolic elements being made deformable, the long propagation distance between the two DMs is eliminated. Goddard has procured an off-axis parabolic DM (PDM or OAP DM) from vendor ALPAO, France. A testbed is currently being built to test the PDM and demonstrate its utility for achieving high contrast in a coronagraph. The testbed is also being built with an integrated low-order wavefront sensing capability, allowing for integrated testing of a dynamic environment with multiple estimation and control loops.

Hari Subedi↗

MO-F-CAMPUS-T-05: Design of An Innovative Beam Monitor for Particle Therapy for the Simultaneous Measurement of Beam Fluence and Energy

Purpose: Monitoring the prescribed dose in particle therapy is typically carried out by using parallel plate ionization chambers working in transmission mode. The use of gas detectors has several drawbacks: they need to be calibrated daily against standard dosimeters and their dependence on beam quality factors need to be fully characterized and controlled with high accuracy. A detector capable of single particle counting is proposed which would overcome all these limitations. Combined with a gas ionization chamber, it will allow determining the average particle stopping power, thus providing an effective method for the online verification of the selected particle energy and range. Methods: Low-Gain Avalanche Detectors (LGADs) are innovative n-in-p silicon sensors with moderate internal charge multiplication occurring in the strong field generated by an additional p+ doping layer implanted at a depth of a few µm in the bulk of the sensor. The increased signal-to-noise ratio allows designing very thin, few tens of microns, segmented LGADs, called Ultra Fast Silicon Detectors (UFSD), optimized for very fast signal, which would be suitable for charged particle counting at high rates. A prototype UFSD is being designed for this purpose. Results: Different LGAD diodes have been characterized both in laboratory and beam tests, and the results compared both with those obtained with similar diodes without the gain layer and with a program simulating the signal in the sensors. The signal is found to be enhanced in LGADs, while the leakage current and the noise is not affected by the gain. Possible alternative designs and implementations are also presented and discussed. Conclusion: Thanks to their excellent counting capabilities, UFSD detectors are a promising technology for future beam monitor devices in hadron-therapy applications. Studies are ongoing to better understand their properties and optimize the design in view of this application.

61 RADIATION PROTECTION AND DOSIMETRY↗

Enhancement of the Extraction of Uranium from Seawater

Due to the limited uranium resources available for recovery through mining and ore processing and to the environmental problems associated with these operations, the future of nuclear power depends, to a large extent, on the feasibility of recovery of uranium from the ocean. While the amounts of uranium in the ocean are sufficient to fulfill the nuclear industry for many thousands of years, recovery of uranium from the ocean is hampered by its low concentration (3.3 parts per billion) and the presence of many other solutes in seawater at comparable or much higher concentrations. Thus, the only hope for economically viable recovery of uranium from the ocean lies in the development of adsorbents with high capacity and high selectivity for uranium as present in the seawater environment (pH 8.1, U(VI) oxidation state, anionic carbonate complexes). Moreover, it is quite unlikely that economically viable recovery of uranium could be achieved if the adsorbent could be used only once. Thus it is essential to develop adsorbents that can be used through multiple cycles of uranium adsorption followed by elution of the uranium to regenerate the adsorbent without significant degradation of their capacity and selectivity for uranium. Adsorbents used in the large majority of studies aimed at recovery of uranium from seawater are based on the use of radiation grafting to produce polymeric supports, in particular polyethylene, with attached amidoxime groups. This configuration has been concluded to offer the best candidate for use in recovery based on studies which were performed in the early 1980’s. Substantial progress has been made in improving the amidoxime-based adsorbents. The basic approach undertaken by the authors of the proposal, on the other hand, has been to test ligands which have not been included in the scoping studies of the 1980’s or have been developed since then. So far, 18 such ligands have been tested, of which three, including B2MP (an organic phosphate), DAOx (an organic oxalate), and Br-PADAP (an azo compound) have been selected for further investigation. In addition, Winged Nylon 6 has been identified as a promising polymeric support in view of its large surface area and high chemical stability. Furthermore, improved grafting techniques intended to achieve high grafting density under “green chemistry” conditions, i.e., in aqueous media, have been developed. These techniques include the use of surfactants to enhance the solubility of ligands in water and the use of a homopolymerization inhibitor to promote grafting rather than homopolymerization. Furthermore, unlike amidoxime-based adsorbents, which require a chemical treatment step following the radiation grafting to convert a nitrile group to amidoxime, the adsorbents developed by the authors do not require an additional step after grafting. Highly effective regeneration has been demonstrated for the phosphate-grafted polymeric adsorbent over at least 21 adsorption/elution cycles without significant loss of capacity. The currently proposed study is intended to build upon the progress made so far in developing alternative systems for removal of uranium from seawater. It will focus on the following objectives: Continued searches will be conducted for high-capacity, high-selectivity ligands based on systematic characterization of structural features favorable to uranium adsorption. (For instance, phosphates have been found to be much more effective than the corresponding phosphonates). At the same time, development and testing of the three ligands selected so far will continue, focusing on issues such as high grafting densities and effective regeneration. Testing will be conducted in non-spiked sweater (3.3 µg/L U) and lightly spiked seawater (up to 10 µg/L U). The authors have recently been able to refurbish an ICP-MS spectrometer for this purpose. Improved grafting techniques will be developed and refined for specific ligands. These techniques will include the use of surfactants to allow grafting of ligands with low solubility in water, the use of homopolymerization inhibitors, modifying the chemical structure of ligands to introduce C=C bonds, investigating possible modification of the surface of the polymeric support, and mechanistic analysis of the effects of grafting conditions, in particular accumulated dose and dose rate. Improvements in the characterization of adsorbents before and after contact with seawater will be implemented using techniques such as XPS, SEM-EDS, and zeta potential measurements to investigate the mechanism of uranium adsorption. Effective techniques of multi-cycle regeneration of promising adsorbents without degradation of their performance will be developed and refined through testing of mild, preferably near-neutral eluant solutions. The kinetics of adsorption and desorption of uranium will be investigated. This study is of great operational value and it will also greatly contribute to improved understanding of adsorption/desorption mechanism on promising adsorbents.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Refine your search to explore more results.