Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model identification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Material Identification Using Dual Energy X-ray Absorptiometry

Two implementations of dual energy X-ray absorptiometry were studied to identify materials using X-ray attenuation data taken with the Digital Radiography and Computed Tomography (DRCT) systems that were developed for the Recovered Chemical Materiel Directorate (RCMD). Maitrejean et al.’s approach utilizes eigen effects through Principal Component Analysis, while Osipov et al.’s approach proposed a physics-based method. Both approaches approximate mass attenuation coefficients of materials as a linear combination of basis functions (eigen effects) or physics-based equations. A set of coefficients {a 1 , a 2 , a 3 } or {B, D} were found by parameter optimization in EXCEL Solver. The identification parameters, {$\frac{a_{2}}{a_{1}}$, $\frac{a_{3}}{a_{1}}$} or estimated effective atomic number $\hat{Z}$ from {B, D}, were calculated to identify material of an aluminum 8 step wedge and a steel 8 step wedge in X-ray radiography images taken by a DRCT system. Maitrejean et al.’s approach was unable to provide reliable $\frac{a_{3}}{a_{1}}$ ratio values for identification of materials. Osipov et al.’s approach was found to be more robust in identify materials with a semi-empirical formula derived from test results in this study.

36 MATERIALS SCIENCE↗

Towards Resolving the Risk of Turbine Collision on Fish: FY21-22 Seedling Report Phase I

The most important concern for permitting tidal and river turbines is the collision risk of marine animals with the turbine blades. Our understanding of the risk to individual fish from colliding with turbine blades is poor; if these collisions were to occur, it is unknown whether fish will sustain recoverable injuries or be killed. Equally unknown is the impact these collisions might have on populations, particularly for threatened, endangered, or commercially managed fish species. In addition to observations of interactions of fish with turbines, numerical models need to be developed or expanded to predict impacts on fish populations. These models could replace expensive and technically challenging monitoring programs in high energy, often murky, tidal or river waters. In this project, a multi-pronged approach was taken to understand the state of knowledge for collision risk of fish with turbines and build a pathway forward. This approach included a workshop with experts, a literature review of modeling and empirical studies, the development of a research framework, and the identification of case studies to address through future work. This project is a first step towards the future development of effective and robust numerical models for assessing the collision risk of fish around turbines. This will achieve a balanced and improved estimate of the severity of collision risk to fish at the population scale.

Garavelli, Lysel↗

Cable Damage Detection System and Algorithms Using Time Domain Reflectometry

This report describes the hardware system and the set of algorithms we have developed for detecting damage in cables for the Advanced Development and Process Technologies (ADAPT) Program. This program is part of the W80 Life Extension Program (LEP). The system could be generalized for application to other systems in the future. Critical cables can undergo various types of damage (e.g. short circuits, open circuits, punctures, compression) that manifest as changes in the dielectric/impedance properties of the cables. For our specific problem, only one end of the cable is accessible, and no exemplars of actual damage are available. This work addresses the detection of dielectric/impedance anomalies in transient time domain reflectometry (TDR) measurements on the cables. The approach is to interrogate the cable using time domain reflectometry (TDR) techniques, in which a known pulse is inserted into the cable, and reflections from the cable are measured. The key operating principle is that any important cable damage will manifest itself as an electrical impedance discontinuity that can be measured in the TDR response signal. Machine learning classification algorithms are effectively eliminated from consideration, because only a small number of cables is available for testing; so a sufficient sample size is not attainable. Nonetheless, a key requirement is to achieve very high probability of detection and very low probability of false alarm. The approach is to compare TDR signals from possibly damaged cables to signals or an empirical model derived from reference cables that are known to be undamaged. This requires that the TDR signals are reasonably repeatable from test to test on the same cable, and from cable to cable. Empirical studies show that the repeatability issue is the 'long pole in the tent' for damage detection, because it is has been difficult to achieve reasonable repeatability. This one factor dominated the project. The two-step model-based approach is summarized as follows: Step 1, Cable Modeling: Given input-output TDR signals s(n) and x{sub U}(n) for a cable known to be free of damage, system identification algorithms are used to compute a dynamic prediction-error cable model that has output {cflx x}{sub U}(n). The model is declared valid when the innovations e{sub U}(n) = x{sub U}(n) {cflx x}{sub U}(n) satisfy a statistical zero-mean whiteness test. This validated model output is then used as a known reference to which other cables can be compared. Step 2, Cable Testing: The TDR output signal x{sub D}(n) from a cable under test is compared with the model output {cflx x}{sub U}(n) by computing the innovations e{sub D}(n) = x{sub D}(n) {cflx x}{sub U}(n). The innovations are tested using a short-term whiteness test statistic, which employs a statistical confidence interval. If the cable passes the test, this implies that the model is valid and the cable is declared undamaged. If the cable fails the test, this indicates a model mismatch, which means that the cable's dielectric properties have changed; and this implies that the cable is damaged. The test threshold is adjusted to maximize probability of detection and minimize probability of false alarm according to an empirically determined receiver operating characteristic (ROC) curve. An associated confidence interval on the probability of correct classification is also provided. The effectiveness of the algorithm is demonstrated using measured TDR signals for undamaged and damaged cables. Experimental and algorithmic methods for coping with repeatability issues are presented. The model-based damage detection algorithms have been shown to perform well for some representative examples of real TDR signals acquired using the two-dimensional (2D) mockup fixture. If the damage causes a short circuit, then damage detection performance is generally good to excellent. Examples include the cases demonstrated in this report for cuts and pinholes. If the damage does not cause a short circuit, then damage detection performance is generally poor to fair. Examples include the cases demonstrated in this report for crushes and partial cuts.

42 ENGINEERING↗

Atmospheric Transmittance Model Validation for CSP Tower Plants

In yield analysis and plant design of concentrated solar power (CSP) tower plants, increased uncertainties are caused by the mostly unknown solar attenuation between the concentrating heliostat field and the receiver on top of the tower. This attenuation is caused mainly by aerosol particles and water vapor. Various on-site measurement methods of atmospheric extinction in solar tower plants have been developed during recent years, but during resource assessment for distinct tower plant projects in-situ measurement data sets are typically not available. To overcome this lack of information, a transmittance model (TM) has been previously developed and enhanced by the authors to derive the atmospheric transmittance between a heliostat and receiver on the basis of common direct normal irradiance (DNI), temperature, relative humidity and barometric pressure measurements. Previously the model was only tested at one site. In this manuscript, the enhanced TM is validated for three sites (CIEMAT’s Plataforma Solar de Almería (PSA), Spain, Missour, Morocco (MIS) and Zagora, Morocco (ZAG)). As the strongest assumption in the TM is the vertical aerosol particle profile, three different approaches to describe the vertical profile are tested in the TM. One approach assumes a homogeneous aerosol profile up to 1 kilometer above ground, the second approach is based on LIVAS profiles obtained from Lidar measurements and the third approach uses boundary layer height (BLH) data of the European Centre for Medium-Range Weather Forecasts (ECMWF). The derived broadband transmittance for a slant range of 1 km (T 1$km$ ) time series is compared with a reference data set of on-site absorption- and broadband corrected T 1$km$ derived from meteorological optical range (MOR) measurements for the temporal period between January 2015 and November 2017. The absolute mean bias error (MBE) for the TM’s T 1$km$ using the three different aerosol profiles lies below 5% except for ZAG and one profile assumption. The MBE is close to 0 for PSA and MIS assuming a homogeneous extinction coefficient up to 1 km above ground. The root mean square error (RMSE) is around 5–6% for PSA and ZAG and around 7–8% for MIS. The TM performs better during summer months, during which more data points have been evaluated. This validation proves the applicability of the transmittance model for resource assessment at various sites. It enables the identification of a clear site with high T 1$km$ with a high accuracy and provides an estimation of the T 1$km$ for hazy sites. Thus it facilitates the decision if on-site extinction measurements are necessary. The model can be used to improve the accuracy of yield analysis of tower plants and allows the site adapted design.

14 SOLAR ENERGY↗

Thermoelectric pump performance analysis computer code

A computer program is presented that was used to analyze and design dual-throat electromagnetic dc conduction pumps for the 5-kwe ZrH reactor thermoelectric system. In addition to a listing of the code and corresponding identification of symbols, the bases for this analytical model are provided.

Johnson, J. L.↗

H2 quadrupole rotation-vibration lines in infrared spectra of cool stars

A discrepancy between results concerning the 2-0 band and the 1-0 band obtained by Spinrad (1966) and by other observers is considered, and preliminary results of a search for lines from the stronger 1-0 band are reported. The results are reviewed in the light of recent model-atmosphere calculations. It is suggested that alternative identifications for the 2-0 lines near 1 micron can be found and that the hydrogen molecule is a very minor contributor to these stellar features.

Lambert, D. L.↗

Supernova 1972 e in NGC 5253

New absolute energy distributions of the Type 1 supernova 1972e in NGC 5253 extending to about 700 days after maximum light were obtained. A physical model of the expanding envelope, based on the identification of the feature at 6550 A with H-alpha, is proposed. It is described as a differentially expanding atmosphere, with electron density ranging from 10 to the 10th power near maximum light to about 10 to the 7th power, 340 days later, illuminated by a photosphere with temperature in the range 10,000 K to 7,000 K. More than 200 days after maximum, the spectrum was dominated by four features between 4200 A and 5500 A. Three of these four features matched the blended emissions from over 100 lines of Fe II. Possible identifications of the fourth feature with Mg I lambda 4571 or permitted lines of Fe II are also discussed.

Kirshner, R. P.↗

Chain pooling to minimize prediction error in subset regression

Monte Carlo studies using population models intended to represent response surface applications are reported. Simulated experiments were generated by adding pseudo random normally distributed errors to population values to generate observations. Model equations were fitted to the observations and the decision procedure was used to delete terms. Comparison of values predicted by the reduced models with the true population values enabled the identification of deletion strategies that are approximately optimal for minimizing prediction errors.

Holms, A. G.↗

Supernova 1972e in NGC 5253

Absolute energy distributions of the Type I supernova 1972e in NGC 5253 extending to about 700 days after maximum light have been obtained. A physical model of the expanding envelope, based on the identification of the feature at 6550 A with H-alpha is proposed. It consists of a differentially expanding atmosphere, with electron density ranging from 10 billion near maximum light to about 10 million 340 days later, illuminated by a photosphere with temperature in the range from 10,000 K to 7000 K. Under these conditions, the identifications of Ca II 8600-A, H, and K lines, the Na D lines, and the Mg I b lines forming P Cygni lines are quite plausible. More than 200 days after maximum, the spectrum is dominated by four features between 4200 and 5500 A. Three of these four features match the blended emissions from over 100 Fe II forbidden lines. If this identification is correct, the envelope requires about 0.01 solar mass of iron, which corresponds to an Fe/H ratio about 20 times higher than the cosmic abundance. Possible identifications of the fourth feature with the Mg I 4571-A line or permitted lines of Fe II are also discussed.

Kirshner, R. P.↗

Observations of electron gyroharmonic waves and the structure of the Io torus

Narrow-banded emissions were observed by the Planetary Radio Astronomy experiment on the Voyager 1 spacecraft as it traversed the Io plasma torus. These waves occur between harmonics of the electron gyrofrequency and are the Jovian analogue of electrostatic emissions observed and theoretically studied for the terrestrial magnetosphere. The observed frequencies always include the component near the upper hybrid resonant frequency, (fuhr) but the distribution of the other observed emissions varies in a systematic way with position in the torus. A refined model of the electron density variation, based on identification of the fuhr line, is included. Spectra of the observed waves are analyzed in terms of the linear instability of an electron distribution function consisting of isotropic cold electrons and hot losscone electrons. The positioning of the observed auxiliary harmonics with respect to fuhr is shown to be an indicator of the cold to hot temperature ratio. It is concluded that this ratio increases systematically by an overall factor of perhaps 4 or 5 between the inner and outer portions of the torus.

Birmingham, T. J.↗

Benefits of detailed models of muscle activation and mechanics

Recent biophysical and physiological studies identified some of the detailed mechanisms involved in excitation-contraction coupling, muscle contraction, and deactivation. Mathematical models incorporating these mechanisms allow independent estimates of key parameters, direct interplay between basic muscle research and the study of motor control, and realistic model behaviors, some of which are not accessible to previous, simpler, models. The existence of previously unmodeled behaviors has important implications for strategies of motor control and identification of neural signals. New developments in the analysis of differential equations make the more detailed models feasible for simulation in realistic experimental situations.

Lehman, S. L.↗

Observations of electron gyroharmonic waves and the structure of the Io torus

Narrow-banded emissions observed by the planetary radio astronomy experiment on the Voyager 1 spacecraft as it traversed the Io plasma torus are discussed. It is found that the waves occur between harmonics of the electron gyrofrequency; they are Jovian analogue of electrostatic emissions observed and theoretically studied for the terrestrial magnetosphere. It is noted that the observed frequencies always include the component near the upper hybrid resonant frequency but that the distribution of the other observed emissions varies in a systematic way with position in the torus. A detailed discussion of the observations is given. Also included is a refined model of the electron density variation, based on identification of the upper hybrid resonant frequency line.

Birmingham, T. J.↗

Space shuttle flying qualities criteria assessment, phase 3

The crucial flight data measurement and reduction techniques required for the experimental approach are explored. An overview of available flight data is presented, identification of the effective augmented vehicle and pilot models determined, a summary of flight data problems compiled, and further recommendations for the Orbiter Flying Qualities (OFQ) experiment provided.

Myers, T. T.↗

Combined analysis of soft and hard X-ray spectra from flares

An attempt is made to develop a self-consistent model which accounts for the line and continuum data generated by the three X-ray imaging instruments on the SMM satellite. The intensities measured covered the 4-500 kV energy range. The model is based on a differential emission measure and electron beam parameters and is used to predict absolute signals detected by the 15 channels of the SMM sensors. Consideration is given to the thermal contribution, instrumental characteristics, thin target excitation and thick target bremsstrahlung. In comparison with data from a flare event on June 29, 1980, model predictions provide a good fit, including the identification of hard electrons with a 5.3 index during the impulsive phase.

Gabriel, A. H.↗

IECON '87: Industrial applications of control and simulation; Proceedings of the 1987 International Conference on Industrial Electronics, Control, and Instrumentation, Cambridge, MA, Nov. 3, 4, 1987

Recent advances in control-system design and simulation are discussed in reviews and reports. Among the topics considered are fast algorithms for generating near-optimal binary decision programs, trajectory control of robot manipulators with compensation of load effects via a six-axis force sensor, matrix integrators for real-time simulation, a high-level control language for an autonomous land vehicle, and a practical engineering design method for stable model-reference adaptive systems. Also addressed are the identification and control of flexible-limb robots with unknown loads, adaptive control and robust adaptive control for manipulators with feedforward compensation, adaptive pole-placement controllers with predictive action, variable-structure strategies for motion control, and digital signal-processor-based variable-structure controls.

Hartley, Tom T.↗

The large-scale distribution of galaxies

The spatial distribution of galaxies in the universe is characterized on the basis of the six completed strips of the Harvard-Smithsonian Center for Astrophysics redshift-survey extension. The design of the survey is briefly reviewed, and the results are presented graphically. Vast low-density voids similar to the void in Bootes are found, almost completely surrounded by thin sheets of galaxies. Also discussed are the implications of the results for the survey sampling problem, the two-point correlation function of the galaxy distribution, the possibility of detecting large-scale coherent flows, theoretical models of large-scale structure, and the identification of groups and clusters of galaxies.

Geller, Margaret J.↗

An architecture for object-oriented intelligent control of power systems in space

A control system for autonomous distribution and control of electrical power during space missions is being developed. This system should free the astronauts from localizing faults and reconfiguring loads if problems with the power distribution and generation components occur. The control system uses an object-oriented simulation model of the power system and first principle knowledge to detect, identify, and isolate faults. Each power system component is represented as a separate object with knowledge of its normal behavior. The reasoning process takes place at three different levels of abstraction: the Physical Component Model (PCM) level, the Electrical Equivalent Model (EEM) level, and the Functional System Model (FSM) level, with the PCM the lowest level of abstraction and the FSM the highest. At the EEM level the power system components are reasoned about as their electrical equivalents, e.g, a resistive load is thought of as a resistor. However, at the PCM level detailed knowledge about the component's specific characteristics is taken into account. The FSM level models the system at the subsystem level, a level appropriate for reconfiguration and scheduling. The control system operates in two modes, a reactive and a proactive mode, simultaneously. In the reactive mode the control system receives measurement data from the power system and compares these values with values determined through simulation to detect the existence of a fault. The nature of the fault is then identified through a model-based reasoning process using mainly the EEM. Compound component models are constructed at the EEM level and used in the fault identification process. In the proactive mode the reasoning takes place at the PCM level. Individual components determine their future health status using a physical model and measured historical data. In case changes in the health status seem imminent the component warns the control system about its impending failure. The fault isolation process uses the FSM level for its reasoning base.

Holmquist, Sven G.↗

Controls, astrophysics, and structures experiment in space ground test facility

This paper describes the initial configuration of the NASA Marshall Space Flight Center (MSFC) Controls/Structures Interaction Advanced Development Facility (CSI ADF), which is a ground test facility (GTF) for the proposed Controls, Astrophysics, and Structures Experiment in Space (CASES). The laboratory has been developed for the purpose of implementing, testing, and evaluating CSI modeling, control system design, failure analysis, and system identification techniques on a representative large space structure. The facility has been configured to represent as closely as possible an actual flight article.

Bukley, Angelia P.↗

Refine your search to explore more results.